[ALSA] dbri: more cleanups
This patch:
- removes redundant constant suffices
- removes redundant parentheses
- removes redundant curly brackets
- removes check if a spinlock is locked inside method which is
only called with the spinlock locked
- moves few functions to the __init section
- removes line which appears twice after the previous patch
- minor comments improvements
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index bfc3930..12d11fc 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -233,12 +233,12 @@
****************************************************************************/
/* DBRI main registers */
-#define REG0 0x00UL /* Status and Control */
-#define REG1 0x04UL /* Mode and Interrupt */
-#define REG2 0x08UL /* Parallel IO */
-#define REG3 0x0cUL /* Test */
-#define REG8 0x20UL /* Command Queue Pointer */
-#define REG9 0x24UL /* Interrupt Queue Pointer */
+#define REG0 0x00 /* Status and Control */
+#define REG1 0x04 /* Mode and Interrupt */
+#define REG2 0x08 /* Parallel IO */
+#define REG3 0x0c /* Test */
+#define REG8 0x20 /* Command Queue Pointer */
+#define REG9 0x24 /* Interrupt Queue Pointer */
#define DBRI_NO_CMDS 64
#define DBRI_INT_BLK 64
@@ -565,7 +565,7 @@
/* Translate the ALSA direction into the array index */
#define DBRI_STREAMNO(substream) \
(substream->stream == \
- SNDRV_PCM_STREAM_PLAYBACK? DBRI_PLAY: DBRI_REC)
+ SNDRV_PCM_STREAM_PLAYBACK ? DBRI_PLAY: DBRI_REC)
/* Return a pointer to dbri_streaminfo */
#define DBRI_STREAM(dbri, substream) \
@@ -611,8 +611,8 @@
CPU interrupt to signal completion.
Since the DBRI can run in parallel with the CPU, several means of
-synchronization present themselves. The method implemented here is only
-use of the dbri_cmdwait() to wait for execution of batch of sent commands.
+synchronization present themselves. The method implemented here uses
+the dbri_cmdwait() to wait for execution of batch of sent commands.
A circular command buffer is used here. A new command is being added
while another can be executed. The scheme works by adding two WAIT commands
@@ -648,15 +648,14 @@
}
spin_unlock_irqrestore(&dbri->lock, flags);
- if (maxloops == 0) {
+ if (maxloops == 0)
printk(KERN_ERR "DBRI: Chip never completed command buffer\n");
- } else {
+ else
dprintk(D_CMD, "Chip completed command buffer (%d)\n",
MAXLOOPS - maxloops - 1);
- }
}
/*
- * Lock the command queue and returns pointer to a space for len cmd words
+ * Lock the command queue and return pointer to space for len cmd words
* It locks the cmdlock spinlock.
*/
static s32 *dbri_cmdlock(struct snd_dbri *dbri, int len)
@@ -749,7 +748,7 @@
}
/* Lock must not be held before calling this */
-static void dbri_initialize(struct snd_dbri *dbri)
+static void __init dbri_initialize(struct snd_dbri *dbri)
{
s32 *cmd;
u32 dma_addr;
@@ -804,7 +803,7 @@
here interface closely with the transmit and receive interrupt code.
*/
-static int pipe_active(struct snd_dbri *dbri, int pipe)
+static inline int pipe_active(struct snd_dbri *dbri, int pipe)
{
return ((pipe >= 0) && (dbri->pipes[pipe].desc != -1));
}
@@ -1148,6 +1147,7 @@
if (!dbri->dma->desc[desc].ba)
break;
}
+
if (desc == DBRI_NO_DESCS) {
printk(KERN_ERR "DBRI: setup_descs: No descriptors\n");
return -1;
@@ -1308,7 +1308,7 @@
* Lock must not be held before calling it.
*/
-static void cs4215_setup_pipes(struct snd_dbri *dbri)
+static __init void cs4215_setup_pipes(struct snd_dbri *dbri)
{
unsigned long flags;
@@ -1341,7 +1341,7 @@
dbri_cmdwait(dbri);
}
-static int cs4215_init_data(struct cs4215 *mm)
+static __init int cs4215_init_data(struct cs4215 *mm)
{
/*
* No action, memory resetting only.
@@ -1633,7 +1633,7 @@
/*
*
*/
-static int cs4215_init(struct snd_dbri *dbri)
+static __init int cs4215_init(struct snd_dbri *dbri)
{
u32 reg2 = sbus_readl(dbri->regs + REG2);
dprintk(D_MM, "cs4215_init: reg2=0x%x\n", reg2);
@@ -1771,13 +1771,10 @@
static void transmission_complete_intr(struct snd_dbri *dbri, int pipe)
{
- struct dbri_streaminfo *info;
- int td;
+ struct dbri_streaminfo *info = &dbri->stream_info[DBRI_PLAY];
+ int td = dbri->pipes[pipe].desc;
int status;
- info = &dbri->stream_info[DBRI_PLAY];
-
- td = dbri->pipes[pipe].desc;
while (td >= 0) {
if (td >= DBRI_NO_DESCS) {
printk(KERN_ERR "DBRI: invalid td on pipe %d\n", pipe);
@@ -1798,12 +1795,9 @@
}
/* Notify ALSA */
- if (spin_is_locked(&dbri->lock)) {
- spin_unlock(&dbri->lock);
- snd_pcm_period_elapsed(info->substream);
- spin_lock(&dbri->lock);
- } else
- snd_pcm_period_elapsed(info->substream);
+ spin_unlock(&dbri->lock);
+ snd_pcm_period_elapsed(info->substream);
+ spin_lock(&dbri->lock);
}
static void reception_complete_intr(struct snd_dbri *dbri, int pipe)
@@ -1830,12 +1824,9 @@
rd, DBRI_RD_STATUS(status), DBRI_RD_CNT(status));
/* Notify ALSA */
- if (spin_is_locked(&dbri->lock)) {
- spin_unlock(&dbri->lock);
- snd_pcm_period_elapsed(info->substream);
- spin_lock(&dbri->lock);
- } else
- snd_pcm_period_elapsed(info->substream);
+ spin_unlock(&dbri->lock);
+ snd_pcm_period_elapsed(info->substream);
+ spin_lock(&dbri->lock);
}
static void dbri_process_one_interrupt(struct snd_dbri *dbri, int x)
@@ -1986,10 +1977,10 @@
PCM Interface
****************************************************************************/
static struct snd_pcm_hardware snd_dbri_pcm_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_MU_LAW |
SNDRV_PCM_FMTBIT_A_LAW |
SNDRV_PCM_FMTBIT_U8 |
@@ -1999,7 +1990,7 @@
.rate_max = 48000,
.channels_min = 1,
.channels_max = 2,
- .buffer_bytes_max = (64 * 1024),
+ .buffer_bytes_max = 64 * 1024,
.period_bytes_min = 1,
.period_bytes_max = DBRI_TD_MAXCNT,
.periods_min = 1,
@@ -2266,11 +2257,10 @@
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 2;
uinfo->value.integer.min = 0;
- if (kcontrol->private_value == DBRI_PLAY) {
+ if (kcontrol->private_value == DBRI_PLAY)
uinfo->value.integer.max = DBRI_MAX_VOLUME;
- } else {
+ else
uinfo->value.integer.max = DBRI_MAX_GAIN;
- }
return 0;
}
@@ -2304,7 +2294,7 @@
info->right_gain = ucontrol->value.integer.value[1];
changed = 1;
}
- if (changed == 1) {
+ if (changed) {
/* First mute outputs, and wait 1/8000 sec (125 us)
* to make sure this takes. This avoids clicking noises.
*/
@@ -2443,8 +2433,9 @@
strcpy(card->mixername, card->shortname);
for (idx = 0; idx < ARRAY_SIZE(dbri_controls); idx++) {
- if ((err = snd_ctl_add(card,
- snd_ctl_new1(&dbri_controls[idx], dbri))) < 0)
+ err = snd_ctl_add(card,
+ snd_ctl_new1(&dbri_controls[idx], dbri));
+ if (err < 0)
return err;
}
@@ -2485,8 +2476,8 @@
"Pipe %d: %s SDP=0x%x desc=%d, "
"len=%d next %d\n",
pipe,
- ((pptr->sdp & D_SDP_TO_SER) ? "output" :
- "input"),
+ (pptr->sdp & D_SDP_TO_SER) ? "output" :
+ "input",
pptr->sdp, pptr->desc,
pptr->length, pptr->nextpipe);
}
@@ -2502,7 +2493,7 @@
snd_info_set_text_ops(entry, dbri, dbri_regs_read);
#ifdef DBRI_DEBUG
- if (! snd_card_proc_new(dbri->card, "debug", &entry)) {
+ if (!snd_card_proc_new(dbri->card, "debug", &entry)) {
snd_info_set_text_ops(entry, dbri, dbri_debug_read);
entry->mode = S_IFREG | S_IRUGO; /* Readable only. */
}
@@ -2633,11 +2624,12 @@
}
dbri = card->private_data;
- if ((err = snd_dbri_pcm(dbri)) < 0)
+ err = snd_dbri_pcm(dbri);
+ if (err < 0)
goto _err;
- if ((err = snd_dbri_mixer(dbri)) < 0)
- if ((err = snd_dbri_mixer(dbri)) < 0)
+ err = snd_dbri_mixer(dbri);
+ if (err < 0)
goto _err;
/* /proc file handling */