mfd: max77693: Remove unnecessary wrapper functions
This patch removes wrapper functions used to access regmap, and
make driver using regmap_*() functions instead.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 2c7c3e1..ba84a6e 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -255,10 +255,10 @@
case ADC_DEBOUNCE_TIME_10MS:
case ADC_DEBOUNCE_TIME_25MS:
case ADC_DEBOUNCE_TIME_38_62MS:
- ret = max77693_update_reg(info->max77693->regmap_muic,
+ ret = regmap_update_bits(info->max77693->regmap_muic,
MAX77693_MUIC_REG_CTRL3,
- time << CONTROL3_ADCDBSET_SHIFT,
- CONTROL3_ADCDBSET_MASK);
+ CONTROL3_ADCDBSET_MASK,
+ time << CONTROL3_ADCDBSET_SHIFT);
if (ret) {
dev_err(info->dev, "failed to set ADC debounce time\n");
return ret;
@@ -286,15 +286,15 @@
u8 val, bool attached)
{
int ret = 0;
- u8 ctrl1, ctrl2 = 0;
+ unsigned int ctrl1, ctrl2 = 0;
if (attached)
ctrl1 = val;
else
ctrl1 = CONTROL1_SW_OPEN;
- ret = max77693_update_reg(info->max77693->regmap_muic,
- MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK);
+ ret = regmap_update_bits(info->max77693->regmap_muic,
+ MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
return ret;
@@ -305,9 +305,9 @@
else
ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */
- ret = max77693_update_reg(info->max77693->regmap_muic,
- MAX77693_MUIC_REG_CTRL2, ctrl2,
- CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
+ ret = regmap_update_bits(info->max77693->regmap_muic,
+ MAX77693_MUIC_REG_CTRL2,
+ CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2);
if (ret < 0) {
dev_err(info->dev, "failed to update MUIC register\n");
return ret;
@@ -969,8 +969,8 @@
if (info->irq == muic_irqs[i].virq)
irq_type = muic_irqs[i].irq;
- ret = max77693_bulk_read(info->max77693->regmap_muic,
- MAX77693_MUIC_REG_STATUS1, 2, info->status);
+ ret = regmap_bulk_read(info->max77693->regmap_muic,
+ MAX77693_MUIC_REG_STATUS1, info->status, 2);
if (ret) {
dev_err(info->dev, "failed to read MUIC register\n");
mutex_unlock(&info->mutex);
@@ -1042,8 +1042,8 @@
mutex_lock(&info->mutex);
/* Read STATUSx register to detect accessory */
- ret = max77693_bulk_read(info->max77693->regmap_muic,
- MAX77693_MUIC_REG_STATUS1, 2, info->status);
+ ret = regmap_bulk_read(info->max77693->regmap_muic,
+ MAX77693_MUIC_REG_STATUS1, info->status, 2);
if (ret) {
dev_err(info->dev, "failed to read MUIC register\n");
mutex_unlock(&info->mutex);
@@ -1095,7 +1095,7 @@
int delay_jiffies;
int ret;
int i;
- u8 id;
+ unsigned int id;
info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info),
GFP_KERNEL);
@@ -1204,7 +1204,7 @@
enum max77693_irq_source irq_src
= MAX77693_IRQ_GROUP_NR;
- max77693_write_reg(info->max77693->regmap_muic,
+ regmap_write(info->max77693->regmap_muic,
init_data[i].addr,
init_data[i].data);
@@ -1262,7 +1262,7 @@
max77693_muic_set_path(info, info->path_uart, true);
/* Check revision number of MUIC device*/
- ret = max77693_read_reg(info->max77693->regmap_muic,
+ ret = regmap_read(info->max77693->regmap_muic,
MAX77693_MUIC_REG_ID, &id);
if (ret < 0) {
dev_err(&pdev->dev, "failed to read revision number\n");