[SCSI] pm80xx: Firmware logging support.
Supports below logging facilities,
Inbound outbound queues dump.
Non fatal dump in case of IO failures.
Fatal dump in case of firmware failure.
[jejb: checkpatch spacing fixes]
Signed-off-by: Anandkumar.Santhanam@pmcs.com
Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index cbde11a..6037d47 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -132,6 +132,61 @@
u8 *func_specific;
};
+#define MPI_FATAL_ERROR_TABLE_OFFSET_MASK 0xFFFFFF
+#define MPI_FATAL_ERROR_TABLE_SIZE(value) ((0xFF000000 & value) >> SHIFT24)
+#define MPI_FATAL_EDUMP_TABLE_LO_OFFSET 0x00 /* HNFBUFL */
+#define MPI_FATAL_EDUMP_TABLE_HI_OFFSET 0x04 /* HNFBUFH */
+#define MPI_FATAL_EDUMP_TABLE_LENGTH 0x08 /* HNFBLEN */
+#define MPI_FATAL_EDUMP_TABLE_HANDSHAKE 0x0C /* FDDHSHK */
+#define MPI_FATAL_EDUMP_TABLE_STATUS 0x10 /* FDDTSTAT */
+#define MPI_FATAL_EDUMP_TABLE_ACCUM_LEN 0x14 /* ACCDDLEN */
+#define MPI_FATAL_EDUMP_HANDSHAKE_RDY 0x1
+#define MPI_FATAL_EDUMP_HANDSHAKE_BUSY 0x0
+#define MPI_FATAL_EDUMP_TABLE_STAT_RSVD 0x0
+#define MPI_FATAL_EDUMP_TABLE_STAT_DMA_FAILED 0x1
+#define MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_MORE_DATA 0x2
+#define MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE 0x3
+#define TYPE_GSM_SPACE 1
+#define TYPE_QUEUE 2
+#define TYPE_FATAL 3
+#define TYPE_NON_FATAL 4
+#define TYPE_INBOUND 1
+#define TYPE_OUTBOUND 2
+struct forensic_data {
+ u32 data_type;
+ union {
+ struct {
+ u32 direct_len;
+ u32 direct_offset;
+ void *direct_data;
+ } gsm_buf;
+ struct {
+ u16 queue_type;
+ u16 queue_index;
+ u32 direct_len;
+ void *direct_data;
+ } queue_buf;
+ struct {
+ u32 direct_len;
+ u32 direct_offset;
+ u32 read_len;
+ void *direct_data;
+ } data_buf;
+ };
+};
+
+/* bit31-26 - mask bar */
+#define SCRATCH_PAD0_BAR_MASK 0xFC000000
+/* bit25-0 - offset mask */
+#define SCRATCH_PAD0_OFFSET_MASK 0x03FFFFFF
+/* if AAP error state */
+#define SCRATCH_PAD0_AAPERR_MASK 0xFFFFFFFF
+/* Inbound doorbell bit7 */
+#define SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP 0x80
+/* Inbound doorbell bit7 SPCV */
+#define SPCV_MSGU_CFG_TABLE_TRANSFER_DEBUG_INFO 0x80
+#define MAIN_MERRDCTO_MERRDCES 0xA0/* DWORD 0x28) */
+
struct pm8001_dispatch {
char *name;
int (*chip_init)(struct pm8001_hba_info *pm8001_ha);
@@ -346,6 +401,7 @@
u32 phy_attr_table_offset;
u32 port_recovery_timer;
u32 interrupt_reassertion_delay;
+ u32 fatal_n_non_fatal_dump; /* 0x28 */
} pm80xx_tbl;
};
@@ -420,6 +476,13 @@
struct pm8001_hba_memspace io_mem[6];
struct mpi_mem_req memoryMap;
struct encrypt encrypt_info; /* support encryption */
+ struct forensic_data forensic_info;
+ u32 fatal_bar_loc;
+ u32 forensic_last_offset;
+ u32 fatal_forensic_shift_offset;
+ u32 forensic_fatal_step;
+ u32 evtlog_ib_offset;
+ u32 evtlog_ob_offset;
void __iomem *msg_unit_tbl_addr;/*Message Unit Table Addr*/
void __iomem *main_cfg_tbl_addr;/*Main Config Table Addr*/
void __iomem *general_stat_tbl_addr;/*General Status Table Addr*/
@@ -428,6 +491,7 @@
void __iomem *pspa_q_tbl_addr;
/*MPI SAS PHY attributes Queue Config Table Addr*/
void __iomem *ivt_tbl_addr; /*MPI IVT Table Addr */
+ void __iomem *fatal_tbl_addr; /*MPI IVT Table Addr */
union main_cfg_table main_cfg_tbl;
union general_status_table gs_tbl;
struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_SPCV_INB_NUM];
@@ -634,6 +698,10 @@
int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
u32 length, u8 *buf);
+int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
+ssize_t pm80xx_get_fatal_dump(struct device *cdev,
+ struct device_attribute *attr, char *buf);
+ssize_t pm8001_get_gsm_dump(struct device *cdev, u32, char *buf);
/* ctl shared API */
extern struct device_attribute *pm8001_host_attrs[];