Input: whitespace fixes in drivers/input/keyboard
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index af0446c..9f9da6d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -227,7 +227,7 @@
{ \
return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \
} \
-static struct device_attribute atkbd_attr_##_name = \
+static struct device_attribute atkbd_attr_##_name = \
__ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name);
ATKBD_DEFINE_ATTR(extra);
@@ -388,7 +388,7 @@
value = atkbd->release ? 0 :
(1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev.key)));
- switch (value) { /* Workaround Toshiba laptop multiple keypress */
+ switch (value) { /* Workaround Toshiba laptop multiple keypress */
case 0:
atkbd->last = 0;
break;
@@ -894,7 +894,7 @@
if (atkbd->write) {
param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0)
| (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0)
- | (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
+ | (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
if (atkbd_probe(atkbd))
return -1;
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index 2694ff2..098963c 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -15,10 +15,10 @@
* information given below, I will _not_ be liable!
*
* RJ10 pinout: To DE9: Or DB25:
- * 1 - RxD <----> Pin 3 (TxD) <-> Pin 2 (TxD)
- * 2 - GND <----> Pin 5 (GND) <-> Pin 7 (GND)
- * 4 - TxD <----> Pin 2 (RxD) <-> Pin 3 (RxD)
- * 3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!!
+ * 1 - RxD <----> Pin 3 (TxD) <-> Pin 2 (TxD)
+ * 2 - GND <----> Pin 5 (GND) <-> Pin 7 (GND)
+ * 4 - TxD <----> Pin 2 (RxD) <-> Pin 3 (RxD)
+ * 3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!!
*
* Pin numbers for DE9 and DB25 are noted on the plug (quite small:). For
* RJ10, it's like this:
diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
index d3e9dd6..8935290 100644
--- a/drivers/input/keyboard/locomokbd.c
+++ b/drivers/input/keyboard/locomokbd.c
@@ -42,7 +42,7 @@
MODULE_DESCRIPTION("LoCoMo keyboard driver");
MODULE_LICENSE("GPL");
-#define LOCOMOKBD_NUMKEYS 128
+#define LOCOMOKBD_NUMKEYS 128
#define KEY_ACTIVITY KEY_F16
#define KEY_CONTACT KEY_F18
@@ -61,7 +61,7 @@
KEY_G, KEY_F, KEY_X, KEY_S, 0, 0, 0, 0, 0, 0, /* 90 - 99 */
0, 0, KEY_DOT, 0, KEY_COMMA, KEY_N, KEY_B, KEY_C, KEY_Z, KEY_A, /* 100 - 109 */
KEY_LEFTSHIFT, KEY_TAB, KEY_LEFTCTRL, 0, 0, 0, 0, 0, 0, 0, /* 110 - 119 */
- KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
+ KEY_M, KEY_SPACE, KEY_V, KEY_APOSTROPHE, KEY_SLASH, 0, 0, 0 /* 120 - 128 */
};
#define KB_ROWS 16
@@ -82,7 +82,7 @@
struct locomo_dev *ldev;
unsigned long base;
spinlock_t lock;
-
+
struct timer_list timer;
};
@@ -95,7 +95,7 @@
static inline void locomokbd_activate_all(unsigned long membase)
{
unsigned long r;
-
+
locomo_writel(0, membase + LOCOMO_KSC);
r = locomo_readl(membase + LOCOMO_KIC);
r &= 0xFEFF;
@@ -127,7 +127,7 @@
*/
/* Scan the hardware keyboard and push any changes up through the input layer */
-static void locomokbd_scankeyboard(struct locomokbd *locomokbd, struct pt_regs *regs)
+static void locomokbd_scankeyboard(struct locomokbd *locomokbd, struct pt_regs *regs)
{
unsigned int row, col, rowd, scancode;
unsigned long flags;
@@ -138,7 +138,7 @@
if (regs)
input_regs(&locomokbd->input, regs);
-
+
locomokbd_charge_all(membase);
num_pressed = 0;
@@ -146,9 +146,9 @@
locomokbd_activate_col(membase, col);
udelay(KB_DELAY);
-
+
rowd = ~locomo_readl(membase + LOCOMO_KIB);
- for (row = 0; row < KB_ROWS; row++ ) {
+ for (row = 0; row < KB_ROWS; row++) {
scancode = SCANCODE(col, row);
if (rowd & KB_ROWMASK(row)) {
num_pressed += 1;
@@ -170,7 +170,7 @@
spin_unlock_irqrestore(&locomokbd->lock, flags);
}
-/*
+/*
* LoCoMo keyboard interrupt handler.
*/
static irqreturn_t locomokbd_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -205,8 +205,8 @@
memset(locomokbd, 0, sizeof(struct locomokbd));
/* try and claim memory region */
- if (!request_mem_region((unsigned long) dev->mapbase,
- dev->length,
+ if (!request_mem_region((unsigned long) dev->mapbase,
+ dev->length,
LOCOMO_DRIVER_NAME(dev))) {
ret = -EBUSY;
printk(KERN_ERR "locomokbd: Can't acquire access to io memory for keyboard\n");
@@ -225,7 +225,7 @@
locomokbd->timer.data = (unsigned long) locomokbd;
locomokbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
-
+
init_input_dev(&locomokbd->input);
locomokbd->input.keycode = locomokbd->keycode;
locomokbd->input.keycodesize = sizeof(unsigned char);
@@ -271,11 +271,11 @@
static int locomokbd_remove(struct locomo_dev *dev)
{
struct locomokbd *locomokbd = locomo_get_drvdata(dev);
-
+
free_irq(dev->irq[0], locomokbd);
del_timer_sync(&locomokbd->timer);
-
+
input_unregister_device(&locomokbd->input);
locomo_set_drvdata(dev, NULL);
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index 859ed77..6ac293f 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -1,6 +1,6 @@
/*
* $Id: maple_keyb.c,v 1.4 2004/03/22 01:18:15 lethal Exp $
- * SEGA Dreamcast keyboard driver
+ * SEGA Dreamcast keyboard driver
* Based on drivers/usb/usbkbd.c
*/