| /* |
| * fs/cifs/misc.c |
| * |
| * Copyright (C) International Business Machines Corp., 2002,2004 |
| * Author(s): Steve French (sfrench@us.ibm.com) |
| * |
| * This library is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU Lesser General Public License as published |
| * by the Free Software Foundation; either version 2.1 of the License, or |
| * (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See |
| * the GNU Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public License |
| * along with this library; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/ctype.h> |
| #include <linux/mempool.h> |
| #include "cifspdu.h" |
| #include "cifsglob.h" |
| #include "cifsproto.h" |
| #include "cifs_debug.h" |
| #include "smberr.h" |
| #include "nterr.h" |
| #include "cifs_unicode.h" |
| |
| extern mempool_t *cifs_sm_req_poolp; |
| extern mempool_t *cifs_req_poolp; |
| extern struct task_struct * oplockThread; |
| |
| /* The xid serves as a useful identifier for each incoming vfs request, |
| in a similar way to the mid which is useful to track each sent smb, |
| and CurrentXid can also provide a running counter (although it |
| will eventually wrap past zero) of the total vfs operations handled |
| since the cifs fs was mounted */ |
| |
| unsigned int |
| _GetXid(void) |
| { |
| unsigned int xid; |
| |
| spin_lock(&GlobalMid_Lock); |
| GlobalTotalActiveXid++; |
| if (GlobalTotalActiveXid > GlobalMaxActiveXid) |
| GlobalMaxActiveXid = GlobalTotalActiveXid; /* keep high water mark for number of simultaneous vfs ops in our filesystem */ |
| if(GlobalTotalActiveXid > 65000) |
| cFYI(1,("warning: more than 65000 requests active")); |
| xid = GlobalCurrentXid++; |
| spin_unlock(&GlobalMid_Lock); |
| return xid; |
| } |
| |
| void |
| _FreeXid(unsigned int xid) |
| { |
| spin_lock(&GlobalMid_Lock); |
| /* if(GlobalTotalActiveXid == 0) |
| BUG(); */ |
| GlobalTotalActiveXid--; |
| spin_unlock(&GlobalMid_Lock); |
| } |
| |
| struct cifsSesInfo * |
| sesInfoAlloc(void) |
| { |
| struct cifsSesInfo *ret_buf; |
| |
| ret_buf = |
| (struct cifsSesInfo *) kmalloc(sizeof (struct cifsSesInfo), |
| GFP_KERNEL); |
| if (ret_buf) { |
| memset(ret_buf, 0, sizeof (struct cifsSesInfo)); |
| write_lock(&GlobalSMBSeslock); |
| atomic_inc(&sesInfoAllocCount); |
| ret_buf->status = CifsNew; |
| list_add(&ret_buf->cifsSessionList, &GlobalSMBSessionList); |
| init_MUTEX(&ret_buf->sesSem); |
| write_unlock(&GlobalSMBSeslock); |
| } |
| return ret_buf; |
| } |
| |
| void |
| sesInfoFree(struct cifsSesInfo *buf_to_free) |
| { |
| if (buf_to_free == NULL) { |
| cFYI(1, ("Null buffer passed to sesInfoFree")); |
| return; |
| } |
| |
| write_lock(&GlobalSMBSeslock); |
| atomic_dec(&sesInfoAllocCount); |
| list_del(&buf_to_free->cifsSessionList); |
| write_unlock(&GlobalSMBSeslock); |
| if (buf_to_free->serverOS) |
| kfree(buf_to_free->serverOS); |
| if (buf_to_free->serverDomain) |
| kfree(buf_to_free->serverDomain); |
| if (buf_to_free->serverNOS) |
| kfree(buf_to_free->serverNOS); |
| if (buf_to_free->password) |
| kfree(buf_to_free->password); |
| kfree(buf_to_free); |
| } |
| |
| struct cifsTconInfo * |
| tconInfoAlloc(void) |
| { |
| struct cifsTconInfo *ret_buf; |
| ret_buf = |
| (struct cifsTconInfo *) kmalloc(sizeof (struct cifsTconInfo), |
| GFP_KERNEL); |
| if (ret_buf) { |
| memset(ret_buf, 0, sizeof (struct cifsTconInfo)); |
| write_lock(&GlobalSMBSeslock); |
| atomic_inc(&tconInfoAllocCount); |
| list_add(&ret_buf->cifsConnectionList, |
| &GlobalTreeConnectionList); |
| ret_buf->tidStatus = CifsNew; |
| INIT_LIST_HEAD(&ret_buf->openFileList); |
| init_MUTEX(&ret_buf->tconSem); |
| #ifdef CONFIG_CIFS_STATS |
| spin_lock_init(&ret_buf->stat_lock); |
| #endif |
| write_unlock(&GlobalSMBSeslock); |
| } |
| return ret_buf; |
| } |
| |
| void |
| tconInfoFree(struct cifsTconInfo *buf_to_free) |
| { |
| if (buf_to_free == NULL) { |
| cFYI(1, ("Null buffer passed to tconInfoFree")); |
| return; |
| } |
| write_lock(&GlobalSMBSeslock); |
| atomic_dec(&tconInfoAllocCount); |
| list_del(&buf_to_free->cifsConnectionList); |
| write_unlock(&GlobalSMBSeslock); |
| if (buf_to_free->nativeFileSystem) |
| kfree(buf_to_free->nativeFileSystem); |
| kfree(buf_to_free); |
| } |
| |
| struct smb_hdr * |
| cifs_buf_get(void) |
| { |
| struct smb_hdr *ret_buf = NULL; |
| |
| /* We could use negotiated size instead of max_msgsize - |
| but it may be more efficient to always alloc same size |
| albeit slightly larger than necessary and maxbuffersize |
| defaults to this and can not be bigger */ |
| ret_buf = |
| (struct smb_hdr *) mempool_alloc(cifs_req_poolp, SLAB_KERNEL | SLAB_NOFS); |
| |
| /* clear the first few header bytes */ |
| /* for most paths, more is cleared in header_assemble */ |
| if (ret_buf) { |
| memset(ret_buf, 0, sizeof(struct smb_hdr) + 3); |
| atomic_inc(&bufAllocCount); |
| } |
| |
| return ret_buf; |
| } |
| |
| void |
| cifs_buf_release(void *buf_to_free) |
| { |
| |
| if (buf_to_free == NULL) { |
| /* cFYI(1, ("Null buffer passed to cifs_buf_release"));*/ |
| return; |
| } |
| mempool_free(buf_to_free,cifs_req_poolp); |
| |
| atomic_dec(&bufAllocCount); |
| return; |
| } |
| |
| struct smb_hdr * |
| cifs_small_buf_get(void) |
| { |
| struct smb_hdr *ret_buf = NULL; |
| |
| /* We could use negotiated size instead of max_msgsize - |
| but it may be more efficient to always alloc same size |
| albeit slightly larger than necessary and maxbuffersize |
| defaults to this and can not be bigger */ |
| ret_buf = |
| (struct smb_hdr *) mempool_alloc(cifs_sm_req_poolp, SLAB_KERNEL | SLAB_NOFS); |
| if (ret_buf) { |
| /* No need to clear memory here, cleared in header assemble */ |
| /* memset(ret_buf, 0, sizeof(struct smb_hdr) + 27);*/ |
| atomic_inc(&smBufAllocCount); |
| } |
| return ret_buf; |
| } |
| |
| void |
| cifs_small_buf_release(void *buf_to_free) |
| { |
| |
| if (buf_to_free == NULL) { |
| cFYI(1, ("Null buffer passed to cifs_small_buf_release")); |
| return; |
| } |
| mempool_free(buf_to_free,cifs_sm_req_poolp); |
| |
| atomic_dec(&smBufAllocCount); |
| return; |
| } |
| |
| /* |
| Find a free multiplex id (SMB mid). Otherwise there could be |
| mid collisions which might cause problems, demultiplexing the |
| wrong response to this request. Multiplex ids could collide if |
| one of a series requests takes much longer than the others, or |
| if a very large number of long lived requests (byte range |
| locks or FindNotify requests) are pending. No more than |
| 64K-1 requests can be outstanding at one time. If no |
| mids are available, return zero. A future optimization |
| could make the combination of mids and uid the key we use |
| to demultiplex on (rather than mid alone). |
| In addition to the above check, the cifs demultiplex |
| code already used the command code as a secondary |
| check of the frame and if signing is negotiated the |
| response would be discarded if the mid were the same |
| but the signature was wrong. Since the mid is not put in the |
| pending queue until later (when it is about to be dispatched) |
| we do have to limit the number of outstanding requests |
| to somewhat less than 64K-1 although it is hard to imagine |
| so many threads being in the vfs at one time. |
| */ |
| __u16 GetNextMid(struct TCP_Server_Info *server) |
| { |
| __u16 mid = 0; |
| __u16 last_mid; |
| int collision; |
| |
| if(server == NULL) |
| return mid; |
| |
| spin_lock(&GlobalMid_Lock); |
| last_mid = server->CurrentMid; /* we do not want to loop forever */ |
| server->CurrentMid++; |
| /* This nested loop looks more expensive than it is. |
| In practice the list of pending requests is short, |
| fewer than 50, and the mids are likely to be unique |
| on the first pass through the loop unless some request |
| takes longer than the 64 thousand requests before it |
| (and it would also have to have been a request that |
| did not time out) */ |
| while(server->CurrentMid != last_mid) { |
| struct list_head *tmp; |
| struct mid_q_entry *mid_entry; |
| |
| collision = 0; |
| if(server->CurrentMid == 0) |
| server->CurrentMid++; |
| |
| list_for_each(tmp, &server->pending_mid_q) { |
| mid_entry = list_entry(tmp, struct mid_q_entry, qhead); |
| |
| if ((mid_entry->mid == server->CurrentMid) && |
| (mid_entry->midState == MID_REQUEST_SUBMITTED)) { |
| /* This mid is in use, try a different one */ |
| collision = 1; |
| break; |
| } |
| } |
| if(collision == 0) { |
| mid = server->CurrentMid; |
| break; |
| } |
| server->CurrentMid++; |
| } |
| spin_unlock(&GlobalMid_Lock); |
| return mid; |
| } |
| |
| /* NB: MID can not be set if treeCon not passed in, in that |
| case it is responsbility of caller to set the mid */ |
| void |
| header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , |
| const struct cifsTconInfo *treeCon, int word_count |
| /* length of fixed section (word count) in two byte units */) |
| { |
| struct list_head* temp_item; |
| struct cifsSesInfo * ses; |
| char *temp = (char *) buffer; |
| |
| memset(temp,0,MAX_CIFS_HDR_SIZE); |
| |
| buffer->smb_buf_length = |
| (2 * word_count) + sizeof (struct smb_hdr) - |
| 4 /* RFC 1001 length field does not count */ + |
| 2 /* for bcc field itself */ ; |
| /* Note that this is the only network field that has to be converted |
| to big endian and it is done just before we send it */ |
| |
| buffer->Protocol[0] = 0xFF; |
| buffer->Protocol[1] = 'S'; |
| buffer->Protocol[2] = 'M'; |
| buffer->Protocol[3] = 'B'; |
| buffer->Command = smb_command; |
| buffer->Flags = 0x00; /* case sensitive */ |
| buffer->Flags2 = SMBFLG2_KNOWS_LONG_NAMES; |
| buffer->Pid = cpu_to_le16((__u16)current->tgid); |
| buffer->PidHigh = cpu_to_le16((__u16)(current->tgid >> 16)); |
| spin_lock(&GlobalMid_Lock); |
| spin_unlock(&GlobalMid_Lock); |
| if (treeCon) { |
| buffer->Tid = treeCon->tid; |
| if (treeCon->ses) { |
| if (treeCon->ses->capabilities & CAP_UNICODE) |
| buffer->Flags2 |= SMBFLG2_UNICODE; |
| if (treeCon->ses->capabilities & CAP_STATUS32) { |
| buffer->Flags2 |= SMBFLG2_ERR_STATUS; |
| } |
| /* Uid is not converted */ |
| buffer->Uid = treeCon->ses->Suid; |
| buffer->Mid = GetNextMid(treeCon->ses->server); |
| if(multiuser_mount != 0) { |
| /* For the multiuser case, there are few obvious technically */ |
| /* possible mechanisms to match the local linux user (uid) */ |
| /* to a valid remote smb user (smb_uid): */ |
| /* 1) Query Winbind (or other local pam/nss daemon */ |
| /* for userid/password/logon_domain or credential */ |
| /* 2) Query Winbind for uid to sid to username mapping */ |
| /* and see if we have a matching password for existing*/ |
| /* session for that user perhas getting password by */ |
| /* adding a new pam_cifs module that stores passwords */ |
| /* so that the cifs vfs can get at that for all logged*/ |
| /* on users */ |
| /* 3) (Which is the mechanism we have chosen) */ |
| /* Search through sessions to the same server for a */ |
| /* a match on the uid that was passed in on mount */ |
| /* with the current processes uid (or euid?) and use */ |
| /* that smb uid. If no existing smb session for */ |
| /* that uid found, use the default smb session ie */ |
| /* the smb session for the volume mounted which is */ |
| /* the same as would be used if the multiuser mount */ |
| /* flag were disabled. */ |
| |
| /* BB Add support for establishing new tCon and SMB Session */ |
| /* with userid/password pairs found on the smb session */ |
| /* for other target tcp/ip addresses BB */ |
| if(current->uid != treeCon->ses->linux_uid) { |
| cFYI(1,("Multiuser mode and UID did not match tcon uid ")); |
| read_lock(&GlobalSMBSeslock); |
| list_for_each(temp_item, &GlobalSMBSessionList) { |
| ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList); |
| if(ses->linux_uid == current->uid) { |
| if(ses->server == treeCon->ses->server) { |
| cFYI(1,("found matching uid substitute right smb_uid")); |
| buffer->Uid = ses->Suid; |
| break; |
| } else { |
| /* BB eventually call cifs_setup_session here */ |
| cFYI(1,("local UID found but smb sess with this server does not exist")); |
| } |
| } |
| } |
| read_unlock(&GlobalSMBSeslock); |
| } |
| } |
| } |
| if (treeCon->Flags & SMB_SHARE_IS_IN_DFS) |
| buffer->Flags2 |= SMBFLG2_DFS; |
| if (treeCon->nocase) |
| buffer->Flags |= SMBFLG_CASELESS; |
| if((treeCon->ses) && (treeCon->ses->server)) |
| if(treeCon->ses->server->secMode & |
| (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) |
| buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE; |
| } |
| |
| /* endian conversion of flags is now done just before sending */ |
| buffer->WordCount = (char) word_count; |
| return; |
| } |
| |
| int |
| checkSMBhdr(struct smb_hdr *smb, __u16 mid) |
| { |
| /* Make sure that this really is an SMB, that it is a response, |
| and that the message ids match */ |
| if ((*(__le32 *) smb->Protocol == cpu_to_le32(0x424d53ff)) && |
| (mid == smb->Mid)) { |
| if(smb->Flags & SMBFLG_RESPONSE) |
| return 0; |
| else { |
| /* only one valid case where server sends us request */ |
| if(smb->Command == SMB_COM_LOCKING_ANDX) |
| return 0; |
| else |
| cERROR(1, ("Rcvd Request not response ")); |
| } |
| } else { /* bad signature or mid */ |
| if (*(__le32 *) smb->Protocol != cpu_to_le32(0x424d53ff)) |
| cERROR(1, |
| ("Bad protocol string signature header %x ", |
| *(unsigned int *) smb->Protocol)); |
| if (mid != smb->Mid) |
| cERROR(1, ("Mids do not match")); |
| } |
| cERROR(1, ("bad smb detected. The Mid=%d", smb->Mid)); |
| return 1; |
| } |
| |
| int |
| checkSMB(struct smb_hdr *smb, __u16 mid, int length) |
| { |
| __u32 len = be32_to_cpu(smb->smb_buf_length); |
| cFYI(0, |
| ("Entering checkSMB with Length: %x, smb_buf_length: %x ", |
| length, len)); |
| if (((unsigned int)length < 2 + sizeof (struct smb_hdr)) || |
| (len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4)) { |
| if ((unsigned int)length < 2 + sizeof (struct smb_hdr)) { |
| if (((unsigned int)length >= |
| sizeof (struct smb_hdr) - 1) |
| && (smb->Status.CifsError != 0)) { |
| smb->WordCount = 0; |
| return 0; /* some error cases do not return wct and bcc */ |
| } else { |
| cERROR(1, ("Length less than smb header size")); |
| } |
| |
| } |
| if (len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE - 4) |
| cERROR(1, |
| ("smb_buf_length greater than MaxBufSize")); |
| cERROR(1, |
| ("bad smb detected. Illegal length. The mid=%d", |
| smb->Mid)); |
| return 1; |
| } |
| |
| if (checkSMBhdr(smb, mid)) |
| return 1; |
| |
| if ((4 + len != smbCalcSize(smb)) |
| || (4 + len != (unsigned int)length)) { |
| return 0; |
| } else { |
| cERROR(1, ("smbCalcSize %x ", smbCalcSize(smb))); |
| cERROR(1, |
| ("bad smb size detected. The Mid=%d", smb->Mid)); |
| return 1; |
| } |
| } |
| int |
| is_valid_oplock_break(struct smb_hdr *buf) |
| { |
| struct smb_com_lock_req * pSMB = (struct smb_com_lock_req *)buf; |
| struct list_head *tmp; |
| struct list_head *tmp1; |
| struct cifsTconInfo *tcon; |
| struct cifsFileInfo *netfile; |
| |
| cFYI(1,("Checking for oplock break or dnotify response")); |
| if((pSMB->hdr.Command == SMB_COM_NT_TRANSACT) && |
| (pSMB->hdr.Flags & SMBFLG_RESPONSE)) { |
| struct smb_com_transaction_change_notify_rsp * pSMBr = |
| (struct smb_com_transaction_change_notify_rsp *)buf; |
| struct file_notify_information * pnotify; |
| __u32 data_offset = 0; |
| if(pSMBr->ByteCount > sizeof(struct file_notify_information)) { |
| data_offset = le32_to_cpu(pSMBr->DataOffset); |
| |
| pnotify = (struct file_notify_information *)((char *)&pSMBr->hdr.Protocol |
| + data_offset); |
| cFYI(1,("dnotify on %s with action: 0x%x",pnotify->FileName, |
| pnotify->Action)); /* BB removeme BB */ |
| /* cifs_dump_mem("Received notify Data is: ",buf,sizeof(struct smb_hdr)+60); */ |
| return TRUE; |
| } |
| if(pSMBr->hdr.Status.CifsError) { |
| cFYI(1,("notify err 0x%d",pSMBr->hdr.Status.CifsError)); |
| return TRUE; |
| } |
| return FALSE; |
| } |
| if(pSMB->hdr.Command != SMB_COM_LOCKING_ANDX) |
| return FALSE; |
| if(pSMB->hdr.Flags & SMBFLG_RESPONSE) { |
| /* no sense logging error on invalid handle on oplock |
| break - harmless race between close request and oplock |
| break response is expected from time to time writing out |
| large dirty files cached on the client */ |
| if ((NT_STATUS_INVALID_HANDLE) == |
| le32_to_cpu(pSMB->hdr.Status.CifsError)) { |
| cFYI(1,("invalid handle on oplock break")); |
| return TRUE; |
| } else if (ERRbadfid == |
| le16_to_cpu(pSMB->hdr.Status.DosError.Error)) { |
| return TRUE; |
| } else { |
| return FALSE; /* on valid oplock brk we get "request" */ |
| } |
| } |
| if(pSMB->hdr.WordCount != 8) |
| return FALSE; |
| |
| cFYI(1,(" oplock type 0x%d level 0x%d",pSMB->LockType,pSMB->OplockLevel)); |
| if(!(pSMB->LockType & LOCKING_ANDX_OPLOCK_RELEASE)) |
| return FALSE; |
| |
| /* look up tcon based on tid & uid */ |
| read_lock(&GlobalSMBSeslock); |
| list_for_each(tmp, &GlobalTreeConnectionList) { |
| tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); |
| if (tcon->tid == buf->Tid) { |
| #ifdef CONFIG_CIFS_STATS |
| atomic_inc(&tcon->num_oplock_brks); |
| #endif |
| list_for_each(tmp1,&tcon->openFileList){ |
| netfile = list_entry(tmp1,struct cifsFileInfo, |
| tlist); |
| if(pSMB->Fid == netfile->netfid) { |
| struct cifsInodeInfo *pCifsInode; |
| read_unlock(&GlobalSMBSeslock); |
| cFYI(1,("file id match, oplock break")); |
| pCifsInode = |
| CIFS_I(netfile->pInode); |
| pCifsInode->clientCanCacheAll = FALSE; |
| if(pSMB->OplockLevel == 0) |
| pCifsInode->clientCanCacheRead |
| = FALSE; |
| pCifsInode->oplockPending = TRUE; |
| AllocOplockQEntry(netfile->pInode, |
| netfile->netfid, |
| tcon); |
| cFYI(1,("about to wake up oplock thd")); |
| if(oplockThread) |
| wake_up_process(oplockThread); |
| return TRUE; |
| } |
| } |
| read_unlock(&GlobalSMBSeslock); |
| cFYI(1,("No matching file for oplock break")); |
| return TRUE; |
| } |
| } |
| read_unlock(&GlobalSMBSeslock); |
| cFYI(1,("Can not process oplock break for non-existent connection")); |
| return TRUE; |
| } |
| |
| void |
| dump_smb(struct smb_hdr *smb_buf, int smb_buf_length) |
| { |
| int i, j; |
| char debug_line[17]; |
| unsigned char *buffer; |
| |
| if (traceSMB == 0) |
| return; |
| |
| buffer = (unsigned char *) smb_buf; |
| for (i = 0, j = 0; i < smb_buf_length; i++, j++) { |
| if (i % 8 == 0) { /* have reached the beginning of line */ |
| printk(KERN_DEBUG "| "); |
| j = 0; |
| } |
| printk("%0#4x ", buffer[i]); |
| debug_line[2 * j] = ' '; |
| if (isprint(buffer[i])) |
| debug_line[1 + (2 * j)] = buffer[i]; |
| else |
| debug_line[1 + (2 * j)] = '_'; |
| |
| if (i % 8 == 7) { /* reached end of line, time to print ascii */ |
| debug_line[16] = 0; |
| printk(" | %s\n", debug_line); |
| } |
| } |
| for (; j < 8; j++) { |
| printk(" "); |
| debug_line[2 * j] = ' '; |
| debug_line[1 + (2 * j)] = ' '; |
| } |
| printk( " | %s\n", debug_line); |
| return; |
| } |
| |
| /* Windows maps these to the user defined 16 bit Unicode range since they are |
| reserved symbols (along with \ and /), otherwise illegal to store |
| in filenames in NTFS */ |
| #define UNI_ASTERIK (__u16) ('*' + 0xF000) |
| #define UNI_QUESTION (__u16) ('?' + 0xF000) |
| #define UNI_COLON (__u16) (':' + 0xF000) |
| #define UNI_GRTRTHAN (__u16) ('>' + 0xF000) |
| #define UNI_LESSTHAN (__u16) ('<' + 0xF000) |
| #define UNI_PIPE (__u16) ('|' + 0xF000) |
| #define UNI_SLASH (__u16) ('\\' + 0xF000) |
| |
| /* Convert 16 bit Unicode pathname from wire format to string in current code |
| page. Conversion may involve remapping up the seven characters that are |
| only legal in POSIX-like OS (if they are present in the string). Path |
| names are little endian 16 bit Unicode on the wire */ |
| int |
| cifs_convertUCSpath(char *target, const __le16 * source, int maxlen, |
| const struct nls_table * cp) |
| { |
| int i,j,len; |
| __u16 src_char; |
| |
| for(i = 0, j = 0; i < maxlen; i++) { |
| src_char = le16_to_cpu(source[i]); |
| switch (src_char) { |
| case 0: |
| goto cUCS_out; /* BB check this BB */ |
| case UNI_COLON: |
| target[j] = ':'; |
| break; |
| case UNI_ASTERIK: |
| target[j] = '*'; |
| break; |
| case UNI_QUESTION: |
| target[j] = '?'; |
| break; |
| /* BB We can not handle remapping slash until |
| all the calls to build_path_from_dentry |
| are modified, as they use slash as separator BB */ |
| /* case UNI_SLASH: |
| target[j] = '\\'; |
| break;*/ |
| case UNI_PIPE: |
| target[j] = '|'; |
| break; |
| case UNI_GRTRTHAN: |
| target[j] = '>'; |
| break; |
| case UNI_LESSTHAN: |
| target[j] = '<'; |
| break; |
| default: |
| len = cp->uni2char(src_char, &target[j], |
| NLS_MAX_CHARSET_SIZE); |
| if(len > 0) { |
| j += len; |
| continue; |
| } else { |
| target[j] = '?'; |
| } |
| } |
| j++; |
| /* make sure we do not overrun callers allocated temp buffer */ |
| if(j >= (2 * NAME_MAX)) |
| break; |
| } |
| cUCS_out: |
| target[j] = 0; |
| return j; |
| } |
| |
| /* Convert 16 bit Unicode pathname to wire format from string in current code |
| page. Conversion may involve remapping up the seven characters that are |
| only legal in POSIX-like OS (if they are present in the string). Path |
| names are little endian 16 bit Unicode on the wire */ |
| int |
| cifsConvertToUCS(__le16 * target, const char *source, int maxlen, |
| const struct nls_table * cp, int mapChars) |
| { |
| int i,j,charlen; |
| int len_remaining = maxlen; |
| char src_char; |
| |
| if(!mapChars) |
| return cifs_strtoUCS((wchar_t *) target, source, PATH_MAX, cp); |
| |
| for(i = 0, j = 0; i < maxlen; j++) { |
| src_char = source[i]; |
| switch (src_char) { |
| case 0: |
| target[j] = 0; |
| goto ctoUCS_out; |
| case ':': |
| target[j] = cpu_to_le16(UNI_COLON); |
| break; |
| case '*': |
| target[j] = cpu_to_le16(UNI_ASTERIK); |
| break; |
| case '?': |
| target[j] = cpu_to_le16(UNI_QUESTION); |
| break; |
| case '<': |
| target[j] = cpu_to_le16(UNI_LESSTHAN); |
| break; |
| case '>': |
| target[j] = cpu_to_le16(UNI_GRTRTHAN); |
| break; |
| case '|': |
| target[j] = cpu_to_le16(UNI_PIPE); |
| break; |
| /* BB We can not handle remapping slash until |
| all the calls to build_path_from_dentry |
| are modified, as they use slash as separator BB */ |
| /* case '\\': |
| target[j] = cpu_to_le16(UNI_SLASH); |
| break;*/ |
| default: |
| charlen = cp->char2uni(source+i, |
| len_remaining, target+j); |
| /* if no match, use question mark, which |
| at least in some cases servers as wild card */ |
| if(charlen < 1) { |
| target[j] = cpu_to_le16(0x003f); |
| charlen = 1; |
| } |
| len_remaining -= charlen; |
| /* character may take more than one byte in the |
| the source string, but will take exactly two |
| bytes in the target string */ |
| i+= charlen; |
| continue; |
| } |
| i++; /* move to next char in source string */ |
| len_remaining--; |
| } |
| |
| ctoUCS_out: |
| return i; |
| } |