| /* |
| * sata_nv.c - NVIDIA nForce SATA |
| * |
| * Copyright 2004 NVIDIA Corp. All rights reserved. |
| * Copyright 2004 Andrew Chew |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, write to |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * |
| * libata documentation is available via 'make {ps|pdf}docs', |
| * as Documentation/DocBook/libata.* |
| * |
| * No hardware documentation available outside of NVIDIA. |
| * This driver programs the NVIDIA SATA controller in a similar |
| * fashion as with other PCI IDE BMDMA controllers, with a few |
| * NV-specific details such as register offsets, SATA phy location, |
| * hotplug info, etc. |
| * |
| * CK804/MCP04 controllers support an alternate programming interface |
| * similar to the ADMA specification (with some modifications). |
| * This allows the use of NCQ. Non-DMA-mapped ATA commands are still |
| * sent through the legacy interface. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_device.h> |
| #include <linux/libata.h> |
| |
| #define DRV_NAME "sata_nv" |
| #define DRV_VERSION "3.3" |
| |
| #define NV_ADMA_DMA_BOUNDARY 0xffffffffUL |
| |
| enum { |
| NV_MMIO_BAR = 5, |
| |
| NV_PORTS = 2, |
| NV_PIO_MASK = 0x1f, |
| NV_MWDMA_MASK = 0x07, |
| NV_UDMA_MASK = 0x7f, |
| NV_PORT0_SCR_REG_OFFSET = 0x00, |
| NV_PORT1_SCR_REG_OFFSET = 0x40, |
| |
| /* INT_STATUS/ENABLE */ |
| NV_INT_STATUS = 0x10, |
| NV_INT_ENABLE = 0x11, |
| NV_INT_STATUS_CK804 = 0x440, |
| NV_INT_ENABLE_CK804 = 0x441, |
| |
| /* INT_STATUS/ENABLE bits */ |
| NV_INT_DEV = 0x01, |
| NV_INT_PM = 0x02, |
| NV_INT_ADDED = 0x04, |
| NV_INT_REMOVED = 0x08, |
| |
| NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */ |
| |
| NV_INT_ALL = 0x0f, |
| NV_INT_MASK = NV_INT_DEV | |
| NV_INT_ADDED | NV_INT_REMOVED, |
| |
| /* INT_CONFIG */ |
| NV_INT_CONFIG = 0x12, |
| NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI |
| |
| // For PCI config register 20 |
| NV_MCP_SATA_CFG_20 = 0x50, |
| NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04, |
| NV_MCP_SATA_CFG_20_PORT0_EN = (1 << 17), |
| NV_MCP_SATA_CFG_20_PORT1_EN = (1 << 16), |
| NV_MCP_SATA_CFG_20_PORT0_PWB_EN = (1 << 14), |
| NV_MCP_SATA_CFG_20_PORT1_PWB_EN = (1 << 12), |
| |
| NV_ADMA_MAX_CPBS = 32, |
| NV_ADMA_CPB_SZ = 128, |
| NV_ADMA_APRD_SZ = 16, |
| NV_ADMA_SGTBL_LEN = (1024 - NV_ADMA_CPB_SZ) / |
| NV_ADMA_APRD_SZ, |
| NV_ADMA_SGTBL_TOTAL_LEN = NV_ADMA_SGTBL_LEN + 5, |
| NV_ADMA_SGTBL_SZ = NV_ADMA_SGTBL_LEN * NV_ADMA_APRD_SZ, |
| NV_ADMA_PORT_PRIV_DMA_SZ = NV_ADMA_MAX_CPBS * |
| (NV_ADMA_CPB_SZ + NV_ADMA_SGTBL_SZ), |
| |
| /* BAR5 offset to ADMA general registers */ |
| NV_ADMA_GEN = 0x400, |
| NV_ADMA_GEN_CTL = 0x00, |
| NV_ADMA_NOTIFIER_CLEAR = 0x30, |
| |
| /* BAR5 offset to ADMA ports */ |
| NV_ADMA_PORT = 0x480, |
| |
| /* size of ADMA port register space */ |
| NV_ADMA_PORT_SIZE = 0x100, |
| |
| /* ADMA port registers */ |
| NV_ADMA_CTL = 0x40, |
| NV_ADMA_CPB_COUNT = 0x42, |
| NV_ADMA_NEXT_CPB_IDX = 0x43, |
| NV_ADMA_STAT = 0x44, |
| NV_ADMA_CPB_BASE_LOW = 0x48, |
| NV_ADMA_CPB_BASE_HIGH = 0x4C, |
| NV_ADMA_APPEND = 0x50, |
| NV_ADMA_NOTIFIER = 0x68, |
| NV_ADMA_NOTIFIER_ERROR = 0x6C, |
| |
| /* NV_ADMA_CTL register bits */ |
| NV_ADMA_CTL_HOTPLUG_IEN = (1 << 0), |
| NV_ADMA_CTL_CHANNEL_RESET = (1 << 5), |
| NV_ADMA_CTL_GO = (1 << 7), |
| NV_ADMA_CTL_AIEN = (1 << 8), |
| NV_ADMA_CTL_READ_NON_COHERENT = (1 << 11), |
| NV_ADMA_CTL_WRITE_NON_COHERENT = (1 << 12), |
| |
| /* CPB response flag bits */ |
| NV_CPB_RESP_DONE = (1 << 0), |
| NV_CPB_RESP_ATA_ERR = (1 << 3), |
| NV_CPB_RESP_CMD_ERR = (1 << 4), |
| NV_CPB_RESP_CPB_ERR = (1 << 7), |
| |
| /* CPB control flag bits */ |
| NV_CPB_CTL_CPB_VALID = (1 << 0), |
| NV_CPB_CTL_QUEUE = (1 << 1), |
| NV_CPB_CTL_APRD_VALID = (1 << 2), |
| NV_CPB_CTL_IEN = (1 << 3), |
| NV_CPB_CTL_FPDMA = (1 << 4), |
| |
| /* APRD flags */ |
| NV_APRD_WRITE = (1 << 1), |
| NV_APRD_END = (1 << 2), |
| NV_APRD_CONT = (1 << 3), |
| |
| /* NV_ADMA_STAT flags */ |
| NV_ADMA_STAT_TIMEOUT = (1 << 0), |
| NV_ADMA_STAT_HOTUNPLUG = (1 << 1), |
| NV_ADMA_STAT_HOTPLUG = (1 << 2), |
| NV_ADMA_STAT_CPBERR = (1 << 4), |
| NV_ADMA_STAT_SERROR = (1 << 5), |
| NV_ADMA_STAT_CMD_COMPLETE = (1 << 6), |
| NV_ADMA_STAT_IDLE = (1 << 8), |
| NV_ADMA_STAT_LEGACY = (1 << 9), |
| NV_ADMA_STAT_STOPPED = (1 << 10), |
| NV_ADMA_STAT_DONE = (1 << 12), |
| NV_ADMA_STAT_ERR = NV_ADMA_STAT_CPBERR | |
| NV_ADMA_STAT_TIMEOUT, |
| |
| /* port flags */ |
| NV_ADMA_PORT_REGISTER_MODE = (1 << 0), |
| NV_ADMA_ATAPI_SETUP_COMPLETE = (1 << 1), |
| |
| }; |
| |
| /* ADMA Physical Region Descriptor - one SG segment */ |
| struct nv_adma_prd { |
| __le64 addr; |
| __le32 len; |
| u8 flags; |
| u8 packet_len; |
| __le16 reserved; |
| }; |
| |
| enum nv_adma_regbits { |
| CMDEND = (1 << 15), /* end of command list */ |
| WNB = (1 << 14), /* wait-not-BSY */ |
| IGN = (1 << 13), /* ignore this entry */ |
| CS1n = (1 << (4 + 8)), /* std. PATA signals follow... */ |
| DA2 = (1 << (2 + 8)), |
| DA1 = (1 << (1 + 8)), |
| DA0 = (1 << (0 + 8)), |
| }; |
| |
| /* ADMA Command Parameter Block |
| The first 5 SG segments are stored inside the Command Parameter Block itself. |
| If there are more than 5 segments the remainder are stored in a separate |
| memory area indicated by next_aprd. */ |
| struct nv_adma_cpb { |
| u8 resp_flags; /* 0 */ |
| u8 reserved1; /* 1 */ |
| u8 ctl_flags; /* 2 */ |
| /* len is length of taskfile in 64 bit words */ |
| u8 len; /* 3 */ |
| u8 tag; /* 4 */ |
| u8 next_cpb_idx; /* 5 */ |
| __le16 reserved2; /* 6-7 */ |
| __le16 tf[12]; /* 8-31 */ |
| struct nv_adma_prd aprd[5]; /* 32-111 */ |
| __le64 next_aprd; /* 112-119 */ |
| __le64 reserved3; /* 120-127 */ |
| }; |
| |
| |
| struct nv_adma_port_priv { |
| struct nv_adma_cpb *cpb; |
| dma_addr_t cpb_dma; |
| struct nv_adma_prd *aprd; |
| dma_addr_t aprd_dma; |
| void __iomem * ctl_block; |
| void __iomem * gen_block; |
| void __iomem * notifier_clear_block; |
| u8 flags; |
| int last_issue_ncq; |
| }; |
| |
| struct nv_host_priv { |
| unsigned long type; |
| }; |
| |
| #define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT))))) |
| |
| static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); |
| static void nv_remove_one (struct pci_dev *pdev); |
| #ifdef CONFIG_PM |
| static int nv_pci_device_resume(struct pci_dev *pdev); |
| #endif |
| static void nv_ck804_host_stop(struct ata_host *host); |
| static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance); |
| static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance); |
| static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); |
| static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg); |
| static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); |
| |
| static void nv_nf2_freeze(struct ata_port *ap); |
| static void nv_nf2_thaw(struct ata_port *ap); |
| static void nv_ck804_freeze(struct ata_port *ap); |
| static void nv_ck804_thaw(struct ata_port *ap); |
| static void nv_error_handler(struct ata_port *ap); |
| static int nv_adma_slave_config(struct scsi_device *sdev); |
| static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc); |
| static void nv_adma_qc_prep(struct ata_queued_cmd *qc); |
| static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc); |
| static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance); |
| static void nv_adma_irq_clear(struct ata_port *ap); |
| static int nv_adma_port_start(struct ata_port *ap); |
| static void nv_adma_port_stop(struct ata_port *ap); |
| #ifdef CONFIG_PM |
| static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg); |
| static int nv_adma_port_resume(struct ata_port *ap); |
| #endif |
| static void nv_adma_error_handler(struct ata_port *ap); |
| static void nv_adma_host_stop(struct ata_host *host); |
| static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc); |
| static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf); |
| |
| enum nv_host_type |
| { |
| GENERIC, |
| NFORCE2, |
| NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ |
| CK804, |
| ADMA |
| }; |
| |
| static const struct pci_device_id nv_pci_tbl[] = { |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), NFORCE2 }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), NFORCE3 }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), NFORCE3 }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA), CK804 }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), GENERIC }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), GENERIC }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), GENERIC }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), GENERIC }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC }, |
| { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, |
| { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, |
| PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC }, |
| |
| { } /* terminate list */ |
| }; |
| |
| static struct pci_driver nv_pci_driver = { |
| .name = DRV_NAME, |
| .id_table = nv_pci_tbl, |
| .probe = nv_init_one, |
| #ifdef CONFIG_PM |
| .suspend = ata_pci_device_suspend, |
| .resume = nv_pci_device_resume, |
| #endif |
| .remove = nv_remove_one, |
| }; |
| |
| static struct scsi_host_template nv_sht = { |
| .module = THIS_MODULE, |
| .name = DRV_NAME, |
| .ioctl = ata_scsi_ioctl, |
| .queuecommand = ata_scsi_queuecmd, |
| .can_queue = ATA_DEF_QUEUE, |
| .this_id = ATA_SHT_THIS_ID, |
| .sg_tablesize = LIBATA_MAX_PRD, |
| .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
| .emulated = ATA_SHT_EMULATED, |
| .use_clustering = ATA_SHT_USE_CLUSTERING, |
| .proc_name = DRV_NAME, |
| .dma_boundary = ATA_DMA_BOUNDARY, |
| .slave_configure = ata_scsi_slave_config, |
| .slave_destroy = ata_scsi_slave_destroy, |
| .bios_param = ata_std_bios_param, |
| #ifdef CONFIG_PM |
| .suspend = ata_scsi_device_suspend, |
| .resume = ata_scsi_device_resume, |
| #endif |
| }; |
| |
| static struct scsi_host_template nv_adma_sht = { |
| .module = THIS_MODULE, |
| .name = DRV_NAME, |
| .ioctl = ata_scsi_ioctl, |
| .queuecommand = ata_scsi_queuecmd, |
| .can_queue = NV_ADMA_MAX_CPBS, |
| .this_id = ATA_SHT_THIS_ID, |
| .sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN, |
| .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
| .emulated = ATA_SHT_EMULATED, |
| .use_clustering = ATA_SHT_USE_CLUSTERING, |
| .proc_name = DRV_NAME, |
| .dma_boundary = NV_ADMA_DMA_BOUNDARY, |
| .slave_configure = nv_adma_slave_config, |
| .slave_destroy = ata_scsi_slave_destroy, |
| .bios_param = ata_std_bios_param, |
| #ifdef CONFIG_PM |
| .suspend = ata_scsi_device_suspend, |
| .resume = ata_scsi_device_resume, |
| #endif |
| }; |
| |
| static const struct ata_port_operations nv_generic_ops = { |
| .port_disable = ata_port_disable, |
| .tf_load = ata_tf_load, |
| .tf_read = ata_tf_read, |
| .exec_command = ata_exec_command, |
| .check_status = ata_check_status, |
| .dev_select = ata_std_dev_select, |
| .bmdma_setup = ata_bmdma_setup, |
| .bmdma_start = ata_bmdma_start, |
| .bmdma_stop = ata_bmdma_stop, |
| .bmdma_status = ata_bmdma_status, |
| .qc_prep = ata_qc_prep, |
| .qc_issue = ata_qc_issue_prot, |
| .freeze = ata_bmdma_freeze, |
| .thaw = ata_bmdma_thaw, |
| .error_handler = nv_error_handler, |
| .post_internal_cmd = ata_bmdma_post_internal_cmd, |
| .data_xfer = ata_data_xfer, |
| .irq_clear = ata_bmdma_irq_clear, |
| .irq_on = ata_irq_on, |
| .irq_ack = ata_irq_ack, |
| .scr_read = nv_scr_read, |
| .scr_write = nv_scr_write, |
| .port_start = ata_port_start, |
| }; |
| |
| static const struct ata_port_operations nv_nf2_ops = { |
| .port_disable = ata_port_disable, |
| .tf_load = ata_tf_load, |
| .tf_read = ata_tf_read, |
| .exec_command = ata_exec_command, |
| .check_status = ata_check_status, |
| .dev_select = ata_std_dev_select, |
| .bmdma_setup = ata_bmdma_setup, |
| .bmdma_start = ata_bmdma_start, |
| .bmdma_stop = ata_bmdma_stop, |
| .bmdma_status = ata_bmdma_status, |
| .qc_prep = ata_qc_prep, |
| .qc_issue = ata_qc_issue_prot, |
| .freeze = nv_nf2_freeze, |
| .thaw = nv_nf2_thaw, |
| .error_handler = nv_error_handler, |
| .post_internal_cmd = ata_bmdma_post_internal_cmd, |
| .data_xfer = ata_data_xfer, |
| .irq_clear = ata_bmdma_irq_clear, |
| .irq_on = ata_irq_on, |
| .irq_ack = ata_irq_ack, |
| .scr_read = nv_scr_read, |
| .scr_write = nv_scr_write, |
| .port_start = ata_port_start, |
| }; |
| |
| static const struct ata_port_operations nv_ck804_ops = { |
| .port_disable = ata_port_disable, |
| .tf_load = ata_tf_load, |
| .tf_read = ata_tf_read, |
| .exec_command = ata_exec_command, |
| .check_status = ata_check_status, |
| .dev_select = ata_std_dev_select, |
| .bmdma_setup = ata_bmdma_setup, |
| .bmdma_start = ata_bmdma_start, |
| .bmdma_stop = ata_bmdma_stop, |
| .bmdma_status = ata_bmdma_status, |
| .qc_prep = ata_qc_prep, |
| .qc_issue = ata_qc_issue_prot, |
| .freeze = nv_ck804_freeze, |
| .thaw = nv_ck804_thaw, |
| .error_handler = nv_error_handler, |
| .post_internal_cmd = ata_bmdma_post_internal_cmd, |
| .data_xfer = ata_data_xfer, |
| .irq_clear = ata_bmdma_irq_clear, |
| .irq_on = ata_irq_on, |
| .irq_ack = ata_irq_ack, |
| .scr_read = nv_scr_read, |
| .scr_write = nv_scr_write, |
| .port_start = ata_port_start, |
| .host_stop = nv_ck804_host_stop, |
| }; |
| |
| static const struct ata_port_operations nv_adma_ops = { |
| .port_disable = ata_port_disable, |
| .tf_load = ata_tf_load, |
| .tf_read = nv_adma_tf_read, |
| .check_atapi_dma = nv_adma_check_atapi_dma, |
| .exec_command = ata_exec_command, |
| .check_status = ata_check_status, |
| .dev_select = ata_std_dev_select, |
| .bmdma_setup = ata_bmdma_setup, |
| .bmdma_start = ata_bmdma_start, |
| .bmdma_stop = ata_bmdma_stop, |
| .bmdma_status = ata_bmdma_status, |
| .qc_prep = nv_adma_qc_prep, |
| .qc_issue = nv_adma_qc_issue, |
| .freeze = nv_ck804_freeze, |
| .thaw = nv_ck804_thaw, |
| .error_handler = nv_adma_error_handler, |
| .post_internal_cmd = nv_adma_post_internal_cmd, |
| .data_xfer = ata_data_xfer, |
| .irq_clear = nv_adma_irq_clear, |
| .irq_on = ata_irq_on, |
| .irq_ack = ata_irq_ack, |
| .scr_read = nv_scr_read, |
| .scr_write = nv_scr_write, |
| .port_start = nv_adma_port_start, |
| .port_stop = nv_adma_port_stop, |
| #ifdef CONFIG_PM |
| .port_suspend = nv_adma_port_suspend, |
| .port_resume = nv_adma_port_resume, |
| #endif |
| .host_stop = nv_adma_host_stop, |
| }; |
| |
| static struct ata_port_info nv_port_info[] = { |
| /* generic */ |
| { |
| .sht = &nv_sht, |
| .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | |
| ATA_FLAG_HRST_TO_RESUME, |
| .pio_mask = NV_PIO_MASK, |
| .mwdma_mask = NV_MWDMA_MASK, |
| .udma_mask = NV_UDMA_MASK, |
| .port_ops = &nv_generic_ops, |
| .irq_handler = nv_generic_interrupt, |
| }, |
| /* nforce2/3 */ |
| { |
| .sht = &nv_sht, |
| .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | |
| ATA_FLAG_HRST_TO_RESUME, |
| .pio_mask = NV_PIO_MASK, |
| .mwdma_mask = NV_MWDMA_MASK, |
| .udma_mask = NV_UDMA_MASK, |
| .port_ops = &nv_nf2_ops, |
| .irq_handler = nv_nf2_interrupt, |
| }, |
| /* ck804 */ |
| { |
| .sht = &nv_sht, |
| .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | |
| ATA_FLAG_HRST_TO_RESUME, |
| .pio_mask = NV_PIO_MASK, |
| .mwdma_mask = NV_MWDMA_MASK, |
| .udma_mask = NV_UDMA_MASK, |
| .port_ops = &nv_ck804_ops, |
| .irq_handler = nv_ck804_interrupt, |
| }, |
| /* ADMA */ |
| { |
| .sht = &nv_adma_sht, |
| .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | |
| ATA_FLAG_HRST_TO_RESUME | |
| ATA_FLAG_MMIO | ATA_FLAG_NCQ, |
| .pio_mask = NV_PIO_MASK, |
| .mwdma_mask = NV_MWDMA_MASK, |
| .udma_mask = NV_UDMA_MASK, |
| .port_ops = &nv_adma_ops, |
| .irq_handler = nv_adma_interrupt, |
| }, |
| }; |
| |
| MODULE_AUTHOR("NVIDIA"); |
| MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(pci, nv_pci_tbl); |
| MODULE_VERSION(DRV_VERSION); |
| |
| static int adma_enabled = 1; |
| |
| static void nv_adma_register_mode(struct ata_port *ap) |
| { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| void __iomem *mmio = pp->ctl_block; |
| u16 tmp, status; |
| int count = 0; |
| |
| if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) |
| return; |
| |
| status = readw(mmio + NV_ADMA_STAT); |
| while(!(status & NV_ADMA_STAT_IDLE) && count < 20) { |
| ndelay(50); |
| status = readw(mmio + NV_ADMA_STAT); |
| count++; |
| } |
| if(count == 20) |
| ata_port_printk(ap, KERN_WARNING, |
| "timeout waiting for ADMA IDLE, stat=0x%hx\n", |
| status); |
| |
| tmp = readw(mmio + NV_ADMA_CTL); |
| writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL); |
| |
| count = 0; |
| status = readw(mmio + NV_ADMA_STAT); |
| while(!(status & NV_ADMA_STAT_LEGACY) && count < 20) { |
| ndelay(50); |
| status = readw(mmio + NV_ADMA_STAT); |
| count++; |
| } |
| if(count == 20) |
| ata_port_printk(ap, KERN_WARNING, |
| "timeout waiting for ADMA LEGACY, stat=0x%hx\n", |
| status); |
| |
| pp->flags |= NV_ADMA_PORT_REGISTER_MODE; |
| } |
| |
| static void nv_adma_mode(struct ata_port *ap) |
| { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| void __iomem *mmio = pp->ctl_block; |
| u16 tmp, status; |
| int count = 0; |
| |
| if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) |
| return; |
| |
| WARN_ON(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE); |
| |
| tmp = readw(mmio + NV_ADMA_CTL); |
| writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL); |
| |
| status = readw(mmio + NV_ADMA_STAT); |
| while(((status & NV_ADMA_STAT_LEGACY) || |
| !(status & NV_ADMA_STAT_IDLE)) && count < 20) { |
| ndelay(50); |
| status = readw(mmio + NV_ADMA_STAT); |
| count++; |
| } |
| if(count == 20) |
| ata_port_printk(ap, KERN_WARNING, |
| "timeout waiting for ADMA LEGACY clear and IDLE, stat=0x%hx\n", |
| status); |
| |
| pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE; |
| } |
| |
| static int nv_adma_slave_config(struct scsi_device *sdev) |
| { |
| struct ata_port *ap = ata_shost_to_port(sdev->host); |
| struct nv_adma_port_priv *pp = ap->private_data; |
| struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
| u64 bounce_limit; |
| unsigned long segment_boundary; |
| unsigned short sg_tablesize; |
| int rc; |
| int adma_enable; |
| u32 current_reg, new_reg, config_mask; |
| |
| rc = ata_scsi_slave_config(sdev); |
| |
| if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun) |
| /* Not a proper libata device, ignore */ |
| return rc; |
| |
| if (ap->device[sdev->id].class == ATA_DEV_ATAPI) { |
| /* |
| * NVIDIA reports that ADMA mode does not support ATAPI commands. |
| * Therefore ATAPI commands are sent through the legacy interface. |
| * However, the legacy interface only supports 32-bit DMA. |
| * Restrict DMA parameters as required by the legacy interface |
| * when an ATAPI device is connected. |
| */ |
| bounce_limit = ATA_DMA_MASK; |
| segment_boundary = ATA_DMA_BOUNDARY; |
| /* Subtract 1 since an extra entry may be needed for padding, see |
| libata-scsi.c */ |
| sg_tablesize = LIBATA_MAX_PRD - 1; |
| |
| /* Since the legacy DMA engine is in use, we need to disable ADMA |
| on the port. */ |
| adma_enable = 0; |
| nv_adma_register_mode(ap); |
| } |
| else { |
| bounce_limit = *ap->dev->dma_mask; |
| segment_boundary = NV_ADMA_DMA_BOUNDARY; |
| sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN; |
| adma_enable = 1; |
| } |
| |
| pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, ¤t_reg); |
| |
| if(ap->port_no == 1) |
| config_mask = NV_MCP_SATA_CFG_20_PORT1_EN | |
| NV_MCP_SATA_CFG_20_PORT1_PWB_EN; |
| else |
| config_mask = NV_MCP_SATA_CFG_20_PORT0_EN | |
| NV_MCP_SATA_CFG_20_PORT0_PWB_EN; |
| |
| if(adma_enable) { |
| new_reg = current_reg | config_mask; |
| pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE; |
| } |
| else { |
| new_reg = current_reg & ~config_mask; |
| pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE; |
| } |
| |
| if(current_reg != new_reg) |
| pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg); |
| |
| blk_queue_bounce_limit(sdev->request_queue, bounce_limit); |
| blk_queue_segment_boundary(sdev->request_queue, segment_boundary); |
| blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize); |
| ata_port_printk(ap, KERN_INFO, |
| "bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n", |
| (unsigned long long)bounce_limit, segment_boundary, sg_tablesize); |
| return rc; |
| } |
| |
| static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc) |
| { |
| struct nv_adma_port_priv *pp = qc->ap->private_data; |
| return !(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE); |
| } |
| |
| static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf) |
| { |
| /* Since commands where a result TF is requested are not |
| executed in ADMA mode, the only time this function will be called |
| in ADMA mode will be if a command fails. In this case we |
| don't care about going into register mode with ADMA commands |
| pending, as the commands will all shortly be aborted anyway. */ |
| nv_adma_register_mode(ap); |
| |
| ata_tf_read(ap, tf); |
| } |
| |
| static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb) |
| { |
| unsigned int idx = 0; |
| |
| if(tf->flags & ATA_TFLAG_ISADDR) { |
| if (tf->flags & ATA_TFLAG_LBA48) { |
| cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature | WNB); |
| cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect); |
| cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal); |
| cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam); |
| cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah); |
| cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature); |
| } else |
| cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature | WNB); |
| |
| cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect); |
| cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal); |
| cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam); |
| cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah); |
| } |
| |
| if(tf->flags & ATA_TFLAG_DEVICE) |
| cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device); |
| |
| cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND); |
| |
| while(idx < 12) |
| cpb[idx++] = cpu_to_le16(IGN); |
| |
| return idx; |
| } |
| |
| static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err) |
| { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| u8 flags = pp->cpb[cpb_num].resp_flags; |
| |
| VPRINTK("CPB %d, flags=0x%x\n", cpb_num, flags); |
| |
| if (unlikely((force_err || |
| flags & (NV_CPB_RESP_ATA_ERR | |
| NV_CPB_RESP_CMD_ERR | |
| NV_CPB_RESP_CPB_ERR)))) { |
| struct ata_eh_info *ehi = &ap->eh_info; |
| int freeze = 0; |
| |
| ata_ehi_clear_desc(ehi); |
| ata_ehi_push_desc(ehi, "CPB resp_flags 0x%x", flags ); |
| if (flags & NV_CPB_RESP_ATA_ERR) { |
| ata_ehi_push_desc(ehi, ": ATA error"); |
| ehi->err_mask |= AC_ERR_DEV; |
| } else if (flags & NV_CPB_RESP_CMD_ERR) { |
| ata_ehi_push_desc(ehi, ": CMD error"); |
| ehi->err_mask |= AC_ERR_DEV; |
| } else if (flags & NV_CPB_RESP_CPB_ERR) { |
| ata_ehi_push_desc(ehi, ": CPB error"); |
| ehi->err_mask |= AC_ERR_SYSTEM; |
| freeze = 1; |
| } else { |
| /* notifier error, but no error in CPB flags? */ |
| ehi->err_mask |= AC_ERR_OTHER; |
| freeze = 1; |
| } |
| /* Kill all commands. EH will determine what actually failed. */ |
| if (freeze) |
| ata_port_freeze(ap); |
| else |
| ata_port_abort(ap); |
| return 1; |
| } |
| |
| if (likely(flags & NV_CPB_RESP_DONE)) { |
| struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num); |
| VPRINTK("CPB flags done, flags=0x%x\n", flags); |
| if (likely(qc)) { |
| DPRINTK("Completing qc from tag %d\n",cpb_num); |
| ata_qc_complete(qc); |
| } else { |
| struct ata_eh_info *ehi = &ap->eh_info; |
| /* Notifier bits set without a command may indicate the drive |
| is misbehaving. Raise host state machine violation on this |
| condition. */ |
| ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n", |
| cpb_num); |
| ehi->err_mask |= AC_ERR_HSM; |
| ehi->action |= ATA_EH_SOFTRESET; |
| ata_port_freeze(ap); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static int nv_host_intr(struct ata_port *ap, u8 irq_stat) |
| { |
| struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); |
| |
| /* freeze if hotplugged */ |
| if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) { |
| ata_port_freeze(ap); |
| return 1; |
| } |
| |
| /* bail out if not our interrupt */ |
| if (!(irq_stat & NV_INT_DEV)) |
| return 0; |
| |
| /* DEV interrupt w/ no active qc? */ |
| if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { |
| ata_check_status(ap); |
| return 1; |
| } |
| |
| /* handle interrupt */ |
| return ata_host_intr(ap, qc); |
| } |
| |
| static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) |
| { |
| struct ata_host *host = dev_instance; |
| int i, handled = 0; |
| u32 notifier_clears[2]; |
| |
| spin_lock(&host->lock); |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap = host->ports[i]; |
| notifier_clears[i] = 0; |
| |
| if (ap && !(ap->flags & ATA_FLAG_DISABLED)) { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| void __iomem *mmio = pp->ctl_block; |
| u16 status; |
| u32 gen_ctl; |
| u32 notifier, notifier_error; |
| |
| /* if in ATA register mode, use standard ata interrupt handler */ |
| if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) { |
| u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804) |
| >> (NV_INT_PORT_SHIFT * i); |
| if(ata_tag_valid(ap->active_tag)) |
| /** NV_INT_DEV indication seems unreliable at times |
| at least in ADMA mode. Force it on always when a |
| command is active, to prevent losing interrupts. */ |
| irq_stat |= NV_INT_DEV; |
| handled += nv_host_intr(ap, irq_stat); |
| continue; |
| } |
| |
| notifier = readl(mmio + NV_ADMA_NOTIFIER); |
| notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR); |
| notifier_clears[i] = notifier | notifier_error; |
| |
| gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL); |
| |
| if( !NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier && |
| !notifier_error) |
| /* Nothing to do */ |
| continue; |
| |
| status = readw(mmio + NV_ADMA_STAT); |
| |
| /* Clear status. Ensure the controller sees the clearing before we start |
| looking at any of the CPB statuses, so that any CPB completions after |
| this point in the handler will raise another interrupt. */ |
| writew(status, mmio + NV_ADMA_STAT); |
| readw(mmio + NV_ADMA_STAT); /* flush posted write */ |
| rmb(); |
| |
| handled++; /* irq handled if we got here */ |
| |
| /* freeze if hotplugged or controller error */ |
| if (unlikely(status & (NV_ADMA_STAT_HOTPLUG | |
| NV_ADMA_STAT_HOTUNPLUG | |
| NV_ADMA_STAT_TIMEOUT | |
| NV_ADMA_STAT_SERROR))) { |
| struct ata_eh_info *ehi = &ap->eh_info; |
| |
| ata_ehi_clear_desc(ehi); |
| ata_ehi_push_desc(ehi, "ADMA status 0x%08x", status ); |
| if (status & NV_ADMA_STAT_TIMEOUT) { |
| ehi->err_mask |= AC_ERR_SYSTEM; |
| ata_ehi_push_desc(ehi, ": timeout"); |
| } else if (status & NV_ADMA_STAT_HOTPLUG) { |
| ata_ehi_hotplugged(ehi); |
| ata_ehi_push_desc(ehi, ": hotplug"); |
| } else if (status & NV_ADMA_STAT_HOTUNPLUG) { |
| ata_ehi_hotplugged(ehi); |
| ata_ehi_push_desc(ehi, ": hot unplug"); |
| } else if (status & NV_ADMA_STAT_SERROR) { |
| /* let libata analyze SError and figure out the cause */ |
| ata_ehi_push_desc(ehi, ": SError"); |
| } |
| ata_port_freeze(ap); |
| continue; |
| } |
| |
| if (status & (NV_ADMA_STAT_DONE | |
| NV_ADMA_STAT_CPBERR)) { |
| u32 check_commands; |
| int pos, error = 0; |
| |
| if(ata_tag_valid(ap->active_tag)) |
| check_commands = 1 << ap->active_tag; |
| else |
| check_commands = ap->sactive; |
| |
| /** Check CPBs for completed commands */ |
| while ((pos = ffs(check_commands)) && !error) { |
| pos--; |
| error = nv_adma_check_cpb(ap, pos, |
| notifier_error & (1 << pos) ); |
| check_commands &= ~(1 << pos ); |
| } |
| } |
| } |
| } |
| |
| if(notifier_clears[0] || notifier_clears[1]) { |
| /* Note: Both notifier clear registers must be written |
| if either is set, even if one is zero, according to NVIDIA. */ |
| struct nv_adma_port_priv *pp = host->ports[0]->private_data; |
| writel(notifier_clears[0], pp->notifier_clear_block); |
| pp = host->ports[1]->private_data; |
| writel(notifier_clears[1], pp->notifier_clear_block); |
| } |
| |
| spin_unlock(&host->lock); |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| static void nv_adma_irq_clear(struct ata_port *ap) |
| { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| void __iomem *mmio = pp->ctl_block; |
| u16 status = readw(mmio + NV_ADMA_STAT); |
| u32 notifier = readl(mmio + NV_ADMA_NOTIFIER); |
| u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR); |
| void __iomem *dma_stat_addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS; |
| |
| /* clear ADMA status */ |
| writew(status, mmio + NV_ADMA_STAT); |
| writel(notifier | notifier_error, |
| pp->notifier_clear_block); |
| |
| /** clear legacy status */ |
| iowrite8(ioread8(dma_stat_addr), dma_stat_addr); |
| } |
| |
| static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc) |
| { |
| struct nv_adma_port_priv *pp = qc->ap->private_data; |
| |
| if(pp->flags & NV_ADMA_PORT_REGISTER_MODE) |
| ata_bmdma_post_internal_cmd(qc); |
| } |
| |
| static int nv_adma_port_start(struct ata_port *ap) |
| { |
| struct device *dev = ap->host->dev; |
| struct nv_adma_port_priv *pp; |
| int rc; |
| void *mem; |
| dma_addr_t mem_dma; |
| void __iomem *mmio; |
| u16 tmp; |
| |
| VPRINTK("ENTER\n"); |
| |
| rc = ata_port_start(ap); |
| if (rc) |
| return rc; |
| |
| pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); |
| if (!pp) |
| return -ENOMEM; |
| |
| mmio = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_PORT + |
| ap->port_no * NV_ADMA_PORT_SIZE; |
| pp->ctl_block = mmio; |
| pp->gen_block = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_GEN; |
| pp->notifier_clear_block = pp->gen_block + |
| NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no); |
| |
| mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ, |
| &mem_dma, GFP_KERNEL); |
| if (!mem) |
| return -ENOMEM; |
| memset(mem, 0, NV_ADMA_PORT_PRIV_DMA_SZ); |
| |
| /* |
| * First item in chunk of DMA memory: |
| * 128-byte command parameter block (CPB) |
| * one for each command tag |
| */ |
| pp->cpb = mem; |
| pp->cpb_dma = mem_dma; |
| |
| writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW); |
| writel((mem_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH); |
| |
| mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ; |
| mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ; |
| |
| /* |
| * Second item: block of ADMA_SGTBL_LEN s/g entries |
| */ |
| pp->aprd = mem; |
| pp->aprd_dma = mem_dma; |
| |
| ap->private_data = pp; |
| |
| /* clear any outstanding interrupt conditions */ |
| writew(0xffff, mmio + NV_ADMA_STAT); |
| |
| /* initialize port variables */ |
| pp->flags = NV_ADMA_PORT_REGISTER_MODE; |
| |
| /* clear CPB fetch count */ |
| writew(0, mmio + NV_ADMA_CPB_COUNT); |
| |
| /* clear GO for register mode, enable interrupt */ |
| tmp = readw(mmio + NV_ADMA_CTL); |
| writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN | |
| NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL); |
| |
| tmp = readw(mmio + NV_ADMA_CTL); |
| writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); |
| readw( mmio + NV_ADMA_CTL ); /* flush posted write */ |
| udelay(1); |
| writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); |
| readw( mmio + NV_ADMA_CTL ); /* flush posted write */ |
| |
| return 0; |
| } |
| |
| static void nv_adma_port_stop(struct ata_port *ap) |
| { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| void __iomem *mmio = pp->ctl_block; |
| |
| VPRINTK("ENTER\n"); |
| writew(0, mmio + NV_ADMA_CTL); |
| } |
| |
| #ifdef CONFIG_PM |
| static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg) |
| { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| void __iomem *mmio = pp->ctl_block; |
| |
| /* Go to register mode - clears GO */ |
| nv_adma_register_mode(ap); |
| |
| /* clear CPB fetch count */ |
| writew(0, mmio + NV_ADMA_CPB_COUNT); |
| |
| /* disable interrupt, shut down port */ |
| writew(0, mmio + NV_ADMA_CTL); |
| |
| return 0; |
| } |
| |
| static int nv_adma_port_resume(struct ata_port *ap) |
| { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| void __iomem *mmio = pp->ctl_block; |
| u16 tmp; |
| |
| /* set CPB block location */ |
| writel(pp->cpb_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW); |
| writel((pp->cpb_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH); |
| |
| /* clear any outstanding interrupt conditions */ |
| writew(0xffff, mmio + NV_ADMA_STAT); |
| |
| /* initialize port variables */ |
| pp->flags |= NV_ADMA_PORT_REGISTER_MODE; |
| |
| /* clear CPB fetch count */ |
| writew(0, mmio + NV_ADMA_CPB_COUNT); |
| |
| /* clear GO for register mode, enable interrupt */ |
| tmp = readw(mmio + NV_ADMA_CTL); |
| writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN | |
| NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL); |
| |
| tmp = readw(mmio + NV_ADMA_CTL); |
| writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); |
| readw( mmio + NV_ADMA_CTL ); /* flush posted write */ |
| udelay(1); |
| writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); |
| readw( mmio + NV_ADMA_CTL ); /* flush posted write */ |
| |
| return 0; |
| } |
| #endif |
| |
| static void nv_adma_setup_port(struct ata_port *ap) |
| { |
| void __iomem *mmio = ap->host->iomap[NV_MMIO_BAR]; |
| struct ata_ioports *ioport = &ap->ioaddr; |
| |
| VPRINTK("ENTER\n"); |
| |
| mmio += NV_ADMA_PORT + ap->port_no * NV_ADMA_PORT_SIZE; |
| |
| ioport->cmd_addr = mmio; |
| ioport->data_addr = mmio + (ATA_REG_DATA * 4); |
| ioport->error_addr = |
| ioport->feature_addr = mmio + (ATA_REG_ERR * 4); |
| ioport->nsect_addr = mmio + (ATA_REG_NSECT * 4); |
| ioport->lbal_addr = mmio + (ATA_REG_LBAL * 4); |
| ioport->lbam_addr = mmio + (ATA_REG_LBAM * 4); |
| ioport->lbah_addr = mmio + (ATA_REG_LBAH * 4); |
| ioport->device_addr = mmio + (ATA_REG_DEVICE * 4); |
| ioport->status_addr = |
| ioport->command_addr = mmio + (ATA_REG_STATUS * 4); |
| ioport->altstatus_addr = |
| ioport->ctl_addr = mmio + 0x20; |
| } |
| |
| static int nv_adma_host_init(struct ata_host *host) |
| { |
| struct pci_dev *pdev = to_pci_dev(host->dev); |
| unsigned int i; |
| u32 tmp32; |
| |
| VPRINTK("ENTER\n"); |
| |
| /* enable ADMA on the ports */ |
| pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32); |
| tmp32 |= NV_MCP_SATA_CFG_20_PORT0_EN | |
| NV_MCP_SATA_CFG_20_PORT0_PWB_EN | |
| NV_MCP_SATA_CFG_20_PORT1_EN | |
| NV_MCP_SATA_CFG_20_PORT1_PWB_EN; |
| |
| pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32); |
| |
| for (i = 0; i < host->n_ports; i++) |
| nv_adma_setup_port(host->ports[i]); |
| |
| return 0; |
| } |
| |
| static void nv_adma_fill_aprd(struct ata_queued_cmd *qc, |
| struct scatterlist *sg, |
| int idx, |
| struct nv_adma_prd *aprd) |
| { |
| u8 flags = 0; |
| if (qc->tf.flags & ATA_TFLAG_WRITE) |
| flags |= NV_APRD_WRITE; |
| if (idx == qc->n_elem - 1) |
| flags |= NV_APRD_END; |
| else if (idx != 4) |
| flags |= NV_APRD_CONT; |
| |
| aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg))); |
| aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */ |
| aprd->flags = flags; |
| aprd->packet_len = 0; |
| } |
| |
| static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb) |
| { |
| struct nv_adma_port_priv *pp = qc->ap->private_data; |
| unsigned int idx; |
| struct nv_adma_prd *aprd; |
| struct scatterlist *sg; |
| |
| VPRINTK("ENTER\n"); |
| |
| idx = 0; |
| |
| ata_for_each_sg(sg, qc) { |
| aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)]; |
| nv_adma_fill_aprd(qc, sg, idx, aprd); |
| idx++; |
| } |
| if (idx > 5) |
| cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag))); |
| else |
| cpb->next_aprd = cpu_to_le64(0); |
| } |
| |
| static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc) |
| { |
| struct nv_adma_port_priv *pp = qc->ap->private_data; |
| |
| /* ADMA engine can only be used for non-ATAPI DMA commands, |
| or interrupt-driven no-data commands, where a result taskfile |
| is not required. */ |
| if((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) || |
| (qc->tf.flags & ATA_TFLAG_POLLING) || |
| (qc->flags & ATA_QCFLAG_RESULT_TF)) |
| return 1; |
| |
| if((qc->flags & ATA_QCFLAG_DMAMAP) || |
| (qc->tf.protocol == ATA_PROT_NODATA)) |
| return 0; |
| |
| return 1; |
| } |
| |
| static void nv_adma_qc_prep(struct ata_queued_cmd *qc) |
| { |
| struct nv_adma_port_priv *pp = qc->ap->private_data; |
| struct nv_adma_cpb *cpb = &pp->cpb[qc->tag]; |
| u8 ctl_flags = NV_CPB_CTL_CPB_VALID | |
| NV_CPB_CTL_IEN; |
| |
| if (nv_adma_use_reg_mode(qc)) { |
| nv_adma_register_mode(qc->ap); |
| ata_qc_prep(qc); |
| return; |
| } |
| |
| cpb->resp_flags = NV_CPB_RESP_DONE; |
| wmb(); |
| cpb->ctl_flags = 0; |
| wmb(); |
| |
| cpb->len = 3; |
| cpb->tag = qc->tag; |
| cpb->next_cpb_idx = 0; |
| |
| /* turn on NCQ flags for NCQ commands */ |
| if (qc->tf.protocol == ATA_PROT_NCQ) |
| ctl_flags |= NV_CPB_CTL_QUEUE | NV_CPB_CTL_FPDMA; |
| |
| VPRINTK("qc->flags = 0x%lx\n", qc->flags); |
| |
| nv_adma_tf_to_cpb(&qc->tf, cpb->tf); |
| |
| if(qc->flags & ATA_QCFLAG_DMAMAP) { |
| nv_adma_fill_sg(qc, cpb); |
| ctl_flags |= NV_CPB_CTL_APRD_VALID; |
| } else |
| memset(&cpb->aprd[0], 0, sizeof(struct nv_adma_prd) * 5); |
| |
| /* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are |
| finished filling in all of the contents */ |
| wmb(); |
| cpb->ctl_flags = ctl_flags; |
| wmb(); |
| cpb->resp_flags = 0; |
| } |
| |
| static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc) |
| { |
| struct nv_adma_port_priv *pp = qc->ap->private_data; |
| void __iomem *mmio = pp->ctl_block; |
| int curr_ncq = (qc->tf.protocol == ATA_PROT_NCQ); |
| |
| VPRINTK("ENTER\n"); |
| |
| if (nv_adma_use_reg_mode(qc)) { |
| /* use ATA register mode */ |
| VPRINTK("using ATA register mode: 0x%lx\n", qc->flags); |
| nv_adma_register_mode(qc->ap); |
| return ata_qc_issue_prot(qc); |
| } else |
| nv_adma_mode(qc->ap); |
| |
| /* write append register, command tag in lower 8 bits |
| and (number of cpbs to append -1) in top 8 bits */ |
| wmb(); |
| |
| if(curr_ncq != pp->last_issue_ncq) { |
| /* Seems to need some delay before switching between NCQ and non-NCQ |
| commands, else we get command timeouts and such. */ |
| udelay(20); |
| pp->last_issue_ncq = curr_ncq; |
| } |
| |
| writew(qc->tag, mmio + NV_ADMA_APPEND); |
| |
| DPRINTK("Issued tag %u\n",qc->tag); |
| |
| return 0; |
| } |
| |
| static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance) |
| { |
| struct ata_host *host = dev_instance; |
| unsigned int i; |
| unsigned int handled = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap; |
| |
| ap = host->ports[i]; |
| if (ap && |
| !(ap->flags & ATA_FLAG_DISABLED)) { |
| struct ata_queued_cmd *qc; |
| |
| qc = ata_qc_from_tag(ap, ap->active_tag); |
| if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) |
| handled += ata_host_intr(ap, qc); |
| else |
| // No request pending? Clear interrupt status |
| // anyway, in case there's one pending. |
| ap->ops->check_status(ap); |
| } |
| |
| } |
| |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| static irqreturn_t nv_do_interrupt(struct ata_host *host, u8 irq_stat) |
| { |
| int i, handled = 0; |
| |
| for (i = 0; i < host->n_ports; i++) { |
| struct ata_port *ap = host->ports[i]; |
| |
| if (ap && !(ap->flags & ATA_FLAG_DISABLED)) |
| handled += nv_host_intr(ap, irq_stat); |
| |
| irq_stat >>= NV_INT_PORT_SHIFT; |
| } |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance) |
| { |
| struct ata_host *host = dev_instance; |
| u8 irq_stat; |
| irqreturn_t ret; |
| |
| spin_lock(&host->lock); |
| irq_stat = ioread8(host->ports[0]->ioaddr.scr_addr + NV_INT_STATUS); |
| ret = nv_do_interrupt(host, irq_stat); |
| spin_unlock(&host->lock); |
| |
| return ret; |
| } |
| |
| static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance) |
| { |
| struct ata_host *host = dev_instance; |
| u8 irq_stat; |
| irqreturn_t ret; |
| |
| spin_lock(&host->lock); |
| irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804); |
| ret = nv_do_interrupt(host, irq_stat); |
| spin_unlock(&host->lock); |
| |
| return ret; |
| } |
| |
| static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) |
| { |
| if (sc_reg > SCR_CONTROL) |
| return 0xffffffffU; |
| |
| return ioread32(ap->ioaddr.scr_addr + (sc_reg * 4)); |
| } |
| |
| static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) |
| { |
| if (sc_reg > SCR_CONTROL) |
| return; |
| |
| iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)); |
| } |
| |
| static void nv_nf2_freeze(struct ata_port *ap) |
| { |
| void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr; |
| int shift = ap->port_no * NV_INT_PORT_SHIFT; |
| u8 mask; |
| |
| mask = ioread8(scr_addr + NV_INT_ENABLE); |
| mask &= ~(NV_INT_ALL << shift); |
| iowrite8(mask, scr_addr + NV_INT_ENABLE); |
| } |
| |
| static void nv_nf2_thaw(struct ata_port *ap) |
| { |
| void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr; |
| int shift = ap->port_no * NV_INT_PORT_SHIFT; |
| u8 mask; |
| |
| iowrite8(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS); |
| |
| mask = ioread8(scr_addr + NV_INT_ENABLE); |
| mask |= (NV_INT_MASK << shift); |
| iowrite8(mask, scr_addr + NV_INT_ENABLE); |
| } |
| |
| static void nv_ck804_freeze(struct ata_port *ap) |
| { |
| void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; |
| int shift = ap->port_no * NV_INT_PORT_SHIFT; |
| u8 mask; |
| |
| mask = readb(mmio_base + NV_INT_ENABLE_CK804); |
| mask &= ~(NV_INT_ALL << shift); |
| writeb(mask, mmio_base + NV_INT_ENABLE_CK804); |
| } |
| |
| static void nv_ck804_thaw(struct ata_port *ap) |
| { |
| void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; |
| int shift = ap->port_no * NV_INT_PORT_SHIFT; |
| u8 mask; |
| |
| writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804); |
| |
| mask = readb(mmio_base + NV_INT_ENABLE_CK804); |
| mask |= (NV_INT_MASK << shift); |
| writeb(mask, mmio_base + NV_INT_ENABLE_CK804); |
| } |
| |
| static int nv_hardreset(struct ata_port *ap, unsigned int *class, |
| unsigned long deadline) |
| { |
| unsigned int dummy; |
| |
| /* SATA hardreset fails to retrieve proper device signature on |
| * some controllers. Don't classify on hardreset. For more |
| * info, see http://bugme.osdl.org/show_bug.cgi?id=3352 |
| */ |
| return sata_std_hardreset(ap, &dummy, deadline); |
| } |
| |
| static void nv_error_handler(struct ata_port *ap) |
| { |
| ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, |
| nv_hardreset, ata_std_postreset); |
| } |
| |
| static void nv_adma_error_handler(struct ata_port *ap) |
| { |
| struct nv_adma_port_priv *pp = ap->private_data; |
| if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) { |
| void __iomem *mmio = pp->ctl_block; |
| int i; |
| u16 tmp; |
| |
| if(ata_tag_valid(ap->active_tag) || ap->sactive) { |
| u32 notifier = readl(mmio + NV_ADMA_NOTIFIER); |
| u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR); |
| u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL); |
| u32 status = readw(mmio + NV_ADMA_STAT); |
| u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT); |
| u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX); |
| |
| ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X " |
| "notifier_error 0x%X gen_ctl 0x%X status 0x%X " |
| "next cpb count 0x%X next cpb idx 0x%x\n", |
| notifier, notifier_error, gen_ctl, status, |
| cpb_count, next_cpb_idx); |
| |
| for( i=0;i<NV_ADMA_MAX_CPBS;i++) { |
| struct nv_adma_cpb *cpb = &pp->cpb[i]; |
| if( (ata_tag_valid(ap->active_tag) && i == ap->active_tag) || |
| ap->sactive & (1 << i) ) |
| ata_port_printk(ap, KERN_ERR, |
| "CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n", |
| i, cpb->ctl_flags, cpb->resp_flags); |
| } |
| } |
| |
| /* Push us back into port register mode for error handling. */ |
| nv_adma_register_mode(ap); |
| |
| /* Mark all of the CPBs as invalid to prevent them from being executed */ |
| for( i=0;i<NV_ADMA_MAX_CPBS;i++) |
| pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID; |
| |
| /* clear CPB fetch count */ |
| writew(0, mmio + NV_ADMA_CPB_COUNT); |
| |
| /* Reset channel */ |
| tmp = readw(mmio + NV_ADMA_CTL); |
| writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); |
| readw( mmio + NV_ADMA_CTL ); /* flush posted write */ |
| udelay(1); |
| writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL); |
| readw( mmio + NV_ADMA_CTL ); /* flush posted write */ |
| } |
| |
| ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, |
| nv_hardreset, ata_std_postreset); |
| } |
| |
| static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| static int printed_version = 0; |
| const struct ata_port_info *ppi[2]; |
| struct ata_host *host; |
| struct nv_host_priv *hpriv; |
| int rc; |
| u32 bar; |
| void __iomem *base; |
| unsigned long type = ent->driver_data; |
| |
| // Make sure this is a SATA controller by counting the number of bars |
| // (NVIDIA SATA controllers will always have six bars). Otherwise, |
| // it's an IDE controller and we ignore it. |
| for (bar=0; bar<6; bar++) |
| if (pci_resource_start(pdev, bar) == 0) |
| return -ENODEV; |
| |
| if (!printed_version++) |
| dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); |
| |
| rc = pcim_enable_device(pdev); |
| if (rc) |
| return rc; |
| |
| /* determine type and allocate host */ |
| if (type >= CK804 && adma_enabled) { |
| dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n"); |
| type = ADMA; |
| } |
| |
| ppi[0] = ppi[1] = &nv_port_info[type]; |
| rc = ata_pci_prepare_native_host(pdev, ppi, 2, &host); |
| if (rc) |
| return rc; |
| |
| hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); |
| if (!hpriv) |
| return -ENOMEM; |
| hpriv->type = type; |
| host->private_data = hpriv; |
| |
| /* set 64bit dma masks, may fail */ |
| if (type == ADMA) { |
| if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) |
| pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); |
| } |
| |
| /* request and iomap NV_MMIO_BAR */ |
| rc = pcim_iomap_regions(pdev, 1 << NV_MMIO_BAR, DRV_NAME); |
| if (rc) |
| return rc; |
| |
| /* configure SCR access */ |
| base = host->iomap[NV_MMIO_BAR]; |
| host->ports[0]->ioaddr.scr_addr = base + NV_PORT0_SCR_REG_OFFSET; |
| host->ports[1]->ioaddr.scr_addr = base + NV_PORT1_SCR_REG_OFFSET; |
| |
| /* enable SATA space for CK804 */ |
| if (type >= CK804) { |
| u8 regval; |
| |
| pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); |
| regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; |
| pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); |
| } |
| |
| /* init ADMA */ |
| if (type == ADMA) { |
| rc = nv_adma_host_init(host); |
| if (rc) |
| return rc; |
| } |
| |
| pci_set_master(pdev); |
| return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler, |
| IRQF_SHARED, ppi[0]->sht); |
| } |
| |
| static void nv_remove_one (struct pci_dev *pdev) |
| { |
| struct ata_host *host = dev_get_drvdata(&pdev->dev); |
| struct nv_host_priv *hpriv = host->private_data; |
| |
| ata_pci_remove_one(pdev); |
| kfree(hpriv); |
| } |
| |
| #ifdef CONFIG_PM |
| static int nv_pci_device_resume(struct pci_dev *pdev) |
| { |
| struct ata_host *host = dev_get_drvdata(&pdev->dev); |
| struct nv_host_priv *hpriv = host->private_data; |
| int rc; |
| |
| rc = ata_pci_device_do_resume(pdev); |
| if(rc) |
| return rc; |
| |
| if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { |
| if(hpriv->type >= CK804) { |
| u8 regval; |
| |
| pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); |
| regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN; |
| pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); |
| } |
| if(hpriv->type == ADMA) { |
| u32 tmp32; |
| struct nv_adma_port_priv *pp; |
| /* enable/disable ADMA on the ports appropriately */ |
| pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32); |
| |
| pp = host->ports[0]->private_data; |
| if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) |
| tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN | |
| NV_MCP_SATA_CFG_20_PORT0_PWB_EN); |
| else |
| tmp32 |= (NV_MCP_SATA_CFG_20_PORT0_EN | |
| NV_MCP_SATA_CFG_20_PORT0_PWB_EN); |
| pp = host->ports[1]->private_data; |
| if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) |
| tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN | |
| NV_MCP_SATA_CFG_20_PORT1_PWB_EN); |
| else |
| tmp32 |= (NV_MCP_SATA_CFG_20_PORT1_EN | |
| NV_MCP_SATA_CFG_20_PORT1_PWB_EN); |
| |
| pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32); |
| } |
| } |
| |
| ata_host_resume(host); |
| |
| return 0; |
| } |
| #endif |
| |
| static void nv_ck804_host_stop(struct ata_host *host) |
| { |
| struct pci_dev *pdev = to_pci_dev(host->dev); |
| u8 regval; |
| |
| /* disable SATA space for CK804 */ |
| pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val); |
| regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN; |
| pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval); |
| } |
| |
| static void nv_adma_host_stop(struct ata_host *host) |
| { |
| struct pci_dev *pdev = to_pci_dev(host->dev); |
| u32 tmp32; |
| |
| /* disable ADMA on the ports */ |
| pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32); |
| tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN | |
| NV_MCP_SATA_CFG_20_PORT0_PWB_EN | |
| NV_MCP_SATA_CFG_20_PORT1_EN | |
| NV_MCP_SATA_CFG_20_PORT1_PWB_EN); |
| |
| pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32); |
| |
| nv_ck804_host_stop(host); |
| } |
| |
| static int __init nv_init(void) |
| { |
| return pci_register_driver(&nv_pci_driver); |
| } |
| |
| static void __exit nv_exit(void) |
| { |
| pci_unregister_driver(&nv_pci_driver); |
| } |
| |
| module_init(nv_init); |
| module_exit(nv_exit); |
| module_param_named(adma, adma_enabled, bool, 0444); |
| MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)"); |