| /* |
| * mac80211 work implementation |
| * |
| * Copyright 2003-2008, Jouni Malinen <j@w1.fi> |
| * Copyright 2004, Instant802 Networks, Inc. |
| * Copyright 2005, Devicescape Software, Inc. |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> |
| * Copyright 2007, Michael Wu <flamingice@sourmilk.net> |
| * Copyright 2009, Johannes Berg <johannes@sipsolutions.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/if_ether.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/crc32.h> |
| #include <linux/slab.h> |
| #include <net/mac80211.h> |
| #include <asm/unaligned.h> |
| |
| #include "ieee80211_i.h" |
| #include "rate.h" |
| |
| #define IEEE80211_AUTH_TIMEOUT (HZ / 5) |
| #define IEEE80211_AUTH_MAX_TRIES 3 |
| #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) |
| #define IEEE80211_ASSOC_MAX_TRIES 3 |
| #define IEEE80211_MAX_PROBE_TRIES 5 |
| |
| enum work_action { |
| WORK_ACT_MISMATCH, |
| WORK_ACT_NONE, |
| WORK_ACT_TIMEOUT, |
| WORK_ACT_DONE, |
| }; |
| |
| |
| /* utils */ |
| static inline void ASSERT_WORK_MTX(struct ieee80211_local *local) |
| { |
| WARN_ON(!mutex_is_locked(&local->work_mtx)); |
| } |
| |
| /* |
| * We can have multiple work items (and connection probing) |
| * scheduling this timer, but we need to take care to only |
| * reschedule it when it should fire _earlier_ than it was |
| * asked for before, or if it's not pending right now. This |
| * function ensures that. Note that it then is required to |
| * run this function for all timeouts after the first one |
| * has happened -- the work that runs from this timer will |
| * do that. |
| */ |
| static void run_again(struct ieee80211_local *local, |
| unsigned long timeout) |
| { |
| ASSERT_WORK_MTX(local); |
| |
| if (!timer_pending(&local->work_timer) || |
| time_before(timeout, local->work_timer.expires)) |
| mod_timer(&local->work_timer, timeout); |
| } |
| |
| static void work_free_rcu(struct rcu_head *head) |
| { |
| struct ieee80211_work *wk = |
| container_of(head, struct ieee80211_work, rcu_head); |
| |
| kfree(wk); |
| } |
| |
| void free_work(struct ieee80211_work *wk) |
| { |
| call_rcu(&wk->rcu_head, work_free_rcu); |
| } |
| |
| static int ieee80211_compatible_rates(const u8 *supp_rates, int supp_rates_len, |
| struct ieee80211_supported_band *sband, |
| u32 *rates) |
| { |
| int i, j, count; |
| *rates = 0; |
| count = 0; |
| for (i = 0; i < supp_rates_len; i++) { |
| int rate = (supp_rates[i] & 0x7F) * 5; |
| |
| for (j = 0; j < sband->n_bitrates; j++) |
| if (sband->bitrates[j].bitrate == rate) { |
| *rates |= BIT(j); |
| count++; |
| break; |
| } |
| } |
| |
| return count; |
| } |
| |
| /* frame sending functions */ |
| |
| static void ieee80211_add_ht_ie(struct sk_buff *skb, const u8 *ht_info_ie, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_channel *channel, |
| enum ieee80211_smps_mode smps) |
| { |
| struct ieee80211_ht_info *ht_info; |
| u8 *pos; |
| u32 flags = channel->flags; |
| u16 cap = sband->ht_cap.cap; |
| __le16 tmp; |
| |
| if (!sband->ht_cap.ht_supported) |
| return; |
| |
| if (!ht_info_ie) |
| return; |
| |
| if (ht_info_ie[1] < sizeof(struct ieee80211_ht_info)) |
| return; |
| |
| ht_info = (struct ieee80211_ht_info *)(ht_info_ie + 2); |
| |
| /* determine capability flags */ |
| |
| if (ieee80211_disable_40mhz_24ghz && |
| sband->band == IEEE80211_BAND_2GHZ) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| |
| switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { |
| case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: |
| if (flags & IEEE80211_CHAN_NO_HT40PLUS) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| break; |
| case IEEE80211_HT_PARAM_CHA_SEC_BELOW: |
| if (flags & IEEE80211_CHAN_NO_HT40MINUS) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| break; |
| } |
| |
| /* set SM PS mode properly */ |
| cap &= ~IEEE80211_HT_CAP_SM_PS; |
| switch (smps) { |
| case IEEE80211_SMPS_AUTOMATIC: |
| case IEEE80211_SMPS_NUM_MODES: |
| WARN_ON(1); |
| case IEEE80211_SMPS_OFF: |
| cap |= WLAN_HT_CAP_SM_PS_DISABLED << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| case IEEE80211_SMPS_STATIC: |
| cap |= WLAN_HT_CAP_SM_PS_STATIC << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| case IEEE80211_SMPS_DYNAMIC: |
| cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| } |
| |
| /* reserve and fill IE */ |
| |
| pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); |
| *pos++ = WLAN_EID_HT_CAPABILITY; |
| *pos++ = sizeof(struct ieee80211_ht_cap); |
| memset(pos, 0, sizeof(struct ieee80211_ht_cap)); |
| |
| /* capability flags */ |
| tmp = cpu_to_le16(cap); |
| memcpy(pos, &tmp, sizeof(u16)); |
| pos += sizeof(u16); |
| |
| /* AMPDU parameters */ |
| *pos++ = sband->ht_cap.ampdu_factor | |
| (sband->ht_cap.ampdu_density << |
| IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT); |
| |
| /* MCS set */ |
| memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs)); |
| pos += sizeof(sband->ht_cap.mcs); |
| |
| /* extended capabilities */ |
| pos += sizeof(__le16); |
| |
| /* BF capabilities */ |
| pos += sizeof(__le32); |
| |
| /* antenna selection */ |
| pos += sizeof(u8); |
| } |
| |
| static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_work *wk) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sk_buff *skb; |
| struct ieee80211_mgmt *mgmt; |
| u8 *pos, qos_info; |
| const u8 *ies; |
| size_t offset = 0, noffset; |
| int i, len, count, rates_len, supp_rates_len; |
| u16 capab; |
| struct ieee80211_supported_band *sband; |
| u32 rates = 0; |
| |
| sband = local->hw.wiphy->bands[wk->chan->band]; |
| |
| if (wk->assoc.supp_rates_len) { |
| /* |
| * Get all rates supported by the device and the AP as |
| * some APs don't like getting a superset of their rates |
| * in the association request (e.g. D-Link DAP 1353 in |
| * b-only mode)... |
| */ |
| rates_len = ieee80211_compatible_rates(wk->assoc.supp_rates, |
| wk->assoc.supp_rates_len, |
| sband, &rates); |
| } else { |
| /* |
| * In case AP not provide any supported rates information |
| * before association, we send information element(s) with |
| * all rates that we support. |
| */ |
| rates = ~0; |
| rates_len = sband->n_bitrates; |
| } |
| |
| skb = alloc_skb(local->hw.extra_tx_headroom + |
| sizeof(*mgmt) + /* bit too much but doesn't matter */ |
| 2 + wk->assoc.ssid_len + /* SSID */ |
| 4 + rates_len + /* (extended) rates */ |
| 4 + /* power capability */ |
| 2 + 2 * sband->n_channels + /* supported channels */ |
| 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ |
| wk->ie_len + /* extra IEs */ |
| 9, /* WMM */ |
| GFP_KERNEL); |
| if (!skb) { |
| printk(KERN_DEBUG "%s: failed to allocate buffer for assoc " |
| "frame\n", sdata->name); |
| return; |
| } |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| capab = WLAN_CAPABILITY_ESS; |
| |
| if (sband->band == IEEE80211_BAND_2GHZ) { |
| if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) |
| capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; |
| if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE)) |
| capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; |
| } |
| |
| if (wk->assoc.capability & WLAN_CAPABILITY_PRIVACY) |
| capab |= WLAN_CAPABILITY_PRIVACY; |
| |
| if ((wk->assoc.capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && |
| (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT)) |
| capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; |
| |
| mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); |
| memset(mgmt, 0, 24); |
| memcpy(mgmt->da, wk->filter_ta, ETH_ALEN); |
| memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); |
| memcpy(mgmt->bssid, wk->filter_ta, ETH_ALEN); |
| |
| if (!is_zero_ether_addr(wk->assoc.prev_bssid)) { |
| skb_put(skb, 10); |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_REASSOC_REQ); |
| mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); |
| mgmt->u.reassoc_req.listen_interval = |
| cpu_to_le16(local->hw.conf.listen_interval); |
| memcpy(mgmt->u.reassoc_req.current_ap, wk->assoc.prev_bssid, |
| ETH_ALEN); |
| } else { |
| skb_put(skb, 4); |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_ASSOC_REQ); |
| mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); |
| mgmt->u.assoc_req.listen_interval = |
| cpu_to_le16(local->hw.conf.listen_interval); |
| } |
| |
| /* SSID */ |
| ies = pos = skb_put(skb, 2 + wk->assoc.ssid_len); |
| *pos++ = WLAN_EID_SSID; |
| *pos++ = wk->assoc.ssid_len; |
| memcpy(pos, wk->assoc.ssid, wk->assoc.ssid_len); |
| |
| /* add all rates which were marked to be used above */ |
| supp_rates_len = rates_len; |
| if (supp_rates_len > 8) |
| supp_rates_len = 8; |
| |
| len = sband->n_bitrates; |
| pos = skb_put(skb, supp_rates_len + 2); |
| *pos++ = WLAN_EID_SUPP_RATES; |
| *pos++ = supp_rates_len; |
| |
| count = 0; |
| for (i = 0; i < sband->n_bitrates; i++) { |
| if (BIT(i) & rates) { |
| int rate = sband->bitrates[i].bitrate; |
| *pos++ = (u8) (rate / 5); |
| if (++count == 8) |
| break; |
| } |
| } |
| |
| if (rates_len > count) { |
| pos = skb_put(skb, rates_len - count + 2); |
| *pos++ = WLAN_EID_EXT_SUPP_RATES; |
| *pos++ = rates_len - count; |
| |
| for (i++; i < sband->n_bitrates; i++) { |
| if (BIT(i) & rates) { |
| int rate = sband->bitrates[i].bitrate; |
| *pos++ = (u8) (rate / 5); |
| } |
| } |
| } |
| |
| if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) { |
| /* 1. power capabilities */ |
| pos = skb_put(skb, 4); |
| *pos++ = WLAN_EID_PWR_CAPABILITY; |
| *pos++ = 2; |
| *pos++ = 0; /* min tx power */ |
| *pos++ = wk->chan->max_power; /* max tx power */ |
| |
| /* 2. supported channels */ |
| /* TODO: get this in reg domain format */ |
| pos = skb_put(skb, 2 * sband->n_channels + 2); |
| *pos++ = WLAN_EID_SUPPORTED_CHANNELS; |
| *pos++ = 2 * sband->n_channels; |
| for (i = 0; i < sband->n_channels; i++) { |
| *pos++ = ieee80211_frequency_to_channel( |
| sband->channels[i].center_freq); |
| *pos++ = 1; /* one channel in the subband*/ |
| } |
| } |
| |
| /* if present, add any custom IEs that go before HT */ |
| if (wk->ie_len && wk->ie) { |
| static const u8 before_ht[] = { |
| WLAN_EID_SSID, |
| WLAN_EID_SUPP_RATES, |
| WLAN_EID_EXT_SUPP_RATES, |
| WLAN_EID_PWR_CAPABILITY, |
| WLAN_EID_SUPPORTED_CHANNELS, |
| WLAN_EID_RSN, |
| WLAN_EID_QOS_CAPA, |
| WLAN_EID_RRM_ENABLED_CAPABILITIES, |
| WLAN_EID_MOBILITY_DOMAIN, |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES, |
| }; |
| noffset = ieee80211_ie_split(wk->ie, wk->ie_len, |
| before_ht, ARRAY_SIZE(before_ht), |
| offset); |
| pos = skb_put(skb, noffset - offset); |
| memcpy(pos, wk->ie + offset, noffset - offset); |
| offset = noffset; |
| } |
| |
| if (wk->assoc.use_11n && wk->assoc.wmm_used && |
| local->hw.queues >= 4) |
| ieee80211_add_ht_ie(skb, wk->assoc.ht_information_ie, |
| sband, wk->chan, wk->assoc.smps); |
| |
| /* if present, add any custom non-vendor IEs that go after HT */ |
| if (wk->ie_len && wk->ie) { |
| noffset = ieee80211_ie_split_vendor(wk->ie, wk->ie_len, |
| offset); |
| pos = skb_put(skb, noffset - offset); |
| memcpy(pos, wk->ie + offset, noffset - offset); |
| offset = noffset; |
| } |
| |
| if (wk->assoc.wmm_used && local->hw.queues >= 4) { |
| if (wk->assoc.uapsd_used) { |
| qos_info = local->uapsd_queues; |
| qos_info |= (local->uapsd_max_sp_len << |
| IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); |
| } else { |
| qos_info = 0; |
| } |
| |
| pos = skb_put(skb, 9); |
| *pos++ = WLAN_EID_VENDOR_SPECIFIC; |
| *pos++ = 7; /* len */ |
| *pos++ = 0x00; /* Microsoft OUI 00:50:F2 */ |
| *pos++ = 0x50; |
| *pos++ = 0xf2; |
| *pos++ = 2; /* WME */ |
| *pos++ = 0; /* WME info */ |
| *pos++ = 1; /* WME ver */ |
| *pos++ = qos_info; |
| } |
| |
| /* add any remaining custom (i.e. vendor specific here) IEs */ |
| if (wk->ie_len && wk->ie) { |
| noffset = wk->ie_len; |
| pos = skb_put(skb, noffset - offset); |
| memcpy(pos, wk->ie + offset, noffset - offset); |
| } |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| static void ieee80211_remove_auth_bss(struct ieee80211_local *local, |
| struct ieee80211_work *wk) |
| { |
| struct cfg80211_bss *cbss; |
| u16 capa_val = WLAN_CAPABILITY_ESS; |
| |
| if (wk->probe_auth.privacy) |
| capa_val |= WLAN_CAPABILITY_PRIVACY; |
| |
| cbss = cfg80211_get_bss(local->hw.wiphy, wk->chan, wk->filter_ta, |
| wk->probe_auth.ssid, wk->probe_auth.ssid_len, |
| WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_PRIVACY, |
| capa_val); |
| if (!cbss) |
| return; |
| |
| cfg80211_unlink_bss(local->hw.wiphy, cbss); |
| cfg80211_put_bss(cbss); |
| } |
| |
| static enum work_action __must_check |
| ieee80211_direct_probe(struct ieee80211_work *wk) |
| { |
| struct ieee80211_sub_if_data *sdata = wk->sdata; |
| struct ieee80211_local *local = sdata->local; |
| |
| wk->probe_auth.tries++; |
| if (wk->probe_auth.tries > IEEE80211_AUTH_MAX_TRIES) { |
| printk(KERN_DEBUG "%s: direct probe to %pM timed out\n", |
| sdata->name, wk->filter_ta); |
| |
| /* |
| * Most likely AP is not in the range so remove the |
| * bss struct for that AP. |
| */ |
| ieee80211_remove_auth_bss(local, wk); |
| |
| return WORK_ACT_TIMEOUT; |
| } |
| |
| printk(KERN_DEBUG "%s: direct probe to %pM (try %d)\n", |
| sdata->name, wk->filter_ta, wk->probe_auth.tries); |
| |
| /* |
| * Direct probe is sent to broadcast address as some APs |
| * will not answer to direct packet in unassociated state. |
| */ |
| ieee80211_send_probe_req(sdata, NULL, wk->probe_auth.ssid, |
| wk->probe_auth.ssid_len, NULL, 0); |
| |
| wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; |
| run_again(local, wk->timeout); |
| |
| return WORK_ACT_NONE; |
| } |
| |
| |
| static enum work_action __must_check |
| ieee80211_authenticate(struct ieee80211_work *wk) |
| { |
| struct ieee80211_sub_if_data *sdata = wk->sdata; |
| struct ieee80211_local *local = sdata->local; |
| |
| wk->probe_auth.tries++; |
| if (wk->probe_auth.tries > IEEE80211_AUTH_MAX_TRIES) { |
| printk(KERN_DEBUG "%s: authentication with %pM" |
| " timed out\n", sdata->name, wk->filter_ta); |
| |
| /* |
| * Most likely AP is not in the range so remove the |
| * bss struct for that AP. |
| */ |
| ieee80211_remove_auth_bss(local, wk); |
| |
| return WORK_ACT_TIMEOUT; |
| } |
| |
| printk(KERN_DEBUG "%s: authenticate with %pM (try %d)\n", |
| sdata->name, wk->filter_ta, wk->probe_auth.tries); |
| |
| ieee80211_send_auth(sdata, 1, wk->probe_auth.algorithm, wk->ie, |
| wk->ie_len, wk->filter_ta, NULL, 0, 0); |
| wk->probe_auth.transaction = 2; |
| |
| wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; |
| run_again(local, wk->timeout); |
| |
| return WORK_ACT_NONE; |
| } |
| |
| static enum work_action __must_check |
| ieee80211_associate(struct ieee80211_work *wk) |
| { |
| struct ieee80211_sub_if_data *sdata = wk->sdata; |
| struct ieee80211_local *local = sdata->local; |
| |
| wk->assoc.tries++; |
| if (wk->assoc.tries > IEEE80211_ASSOC_MAX_TRIES) { |
| printk(KERN_DEBUG "%s: association with %pM" |
| " timed out\n", |
| sdata->name, wk->filter_ta); |
| |
| /* |
| * Most likely AP is not in the range so remove the |
| * bss struct for that AP. |
| */ |
| if (wk->assoc.bss) |
| cfg80211_unlink_bss(local->hw.wiphy, wk->assoc.bss); |
| |
| return WORK_ACT_TIMEOUT; |
| } |
| |
| printk(KERN_DEBUG "%s: associate with %pM (try %d)\n", |
| sdata->name, wk->filter_ta, wk->assoc.tries); |
| ieee80211_send_assoc(sdata, wk); |
| |
| wk->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; |
| run_again(local, wk->timeout); |
| |
| return WORK_ACT_NONE; |
| } |
| |
| static enum work_action __must_check |
| ieee80211_remain_on_channel_timeout(struct ieee80211_work *wk) |
| { |
| /* |
| * First time we run, do nothing -- the generic code will |
| * have switched to the right channel etc. |
| */ |
| if (!wk->started) { |
| wk->timeout = jiffies + msecs_to_jiffies(wk->remain.duration); |
| |
| cfg80211_ready_on_channel(wk->sdata->dev, (unsigned long) wk, |
| wk->chan, wk->chan_type, |
| wk->remain.duration, GFP_KERNEL); |
| |
| return WORK_ACT_NONE; |
| } |
| |
| return WORK_ACT_TIMEOUT; |
| } |
| |
| static void ieee80211_auth_challenge(struct ieee80211_work *wk, |
| struct ieee80211_mgmt *mgmt, |
| size_t len) |
| { |
| struct ieee80211_sub_if_data *sdata = wk->sdata; |
| u8 *pos; |
| struct ieee802_11_elems elems; |
| |
| pos = mgmt->u.auth.variable; |
| ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); |
| if (!elems.challenge) |
| return; |
| ieee80211_send_auth(sdata, 3, wk->probe_auth.algorithm, |
| elems.challenge - 2, elems.challenge_len + 2, |
| wk->filter_ta, wk->probe_auth.key, |
| wk->probe_auth.key_len, wk->probe_auth.key_idx); |
| wk->probe_auth.transaction = 4; |
| } |
| |
| static enum work_action __must_check |
| ieee80211_rx_mgmt_auth(struct ieee80211_work *wk, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| u16 auth_alg, auth_transaction, status_code; |
| |
| if (wk->type != IEEE80211_WORK_AUTH) |
| return WORK_ACT_MISMATCH; |
| |
| if (len < 24 + 6) |
| return WORK_ACT_NONE; |
| |
| auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); |
| auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); |
| status_code = le16_to_cpu(mgmt->u.auth.status_code); |
| |
| if (auth_alg != wk->probe_auth.algorithm || |
| auth_transaction != wk->probe_auth.transaction) |
| return WORK_ACT_NONE; |
| |
| if (status_code != WLAN_STATUS_SUCCESS) { |
| printk(KERN_DEBUG "%s: %pM denied authentication (status %d)\n", |
| wk->sdata->name, mgmt->sa, status_code); |
| return WORK_ACT_DONE; |
| } |
| |
| switch (wk->probe_auth.algorithm) { |
| case WLAN_AUTH_OPEN: |
| case WLAN_AUTH_LEAP: |
| case WLAN_AUTH_FT: |
| break; |
| case WLAN_AUTH_SHARED_KEY: |
| if (wk->probe_auth.transaction != 4) { |
| ieee80211_auth_challenge(wk, mgmt, len); |
| /* need another frame */ |
| return WORK_ACT_NONE; |
| } |
| break; |
| default: |
| WARN_ON(1); |
| return WORK_ACT_NONE; |
| } |
| |
| printk(KERN_DEBUG "%s: authenticated\n", wk->sdata->name); |
| return WORK_ACT_DONE; |
| } |
| |
| static enum work_action __must_check |
| ieee80211_rx_mgmt_assoc_resp(struct ieee80211_work *wk, |
| struct ieee80211_mgmt *mgmt, size_t len, |
| bool reassoc) |
| { |
| struct ieee80211_sub_if_data *sdata = wk->sdata; |
| struct ieee80211_local *local = sdata->local; |
| u16 capab_info, status_code, aid; |
| struct ieee802_11_elems elems; |
| u8 *pos; |
| |
| if (wk->type != IEEE80211_WORK_ASSOC) |
| return WORK_ACT_MISMATCH; |
| |
| /* |
| * AssocResp and ReassocResp have identical structure, so process both |
| * of them in this function. |
| */ |
| |
| if (len < 24 + 6) |
| return WORK_ACT_NONE; |
| |
| capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); |
| status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); |
| aid = le16_to_cpu(mgmt->u.assoc_resp.aid); |
| |
| printk(KERN_DEBUG "%s: RX %sssocResp from %pM (capab=0x%x " |
| "status=%d aid=%d)\n", |
| sdata->name, reassoc ? "Rea" : "A", mgmt->sa, |
| capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); |
| |
| pos = mgmt->u.assoc_resp.variable; |
| ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems); |
| |
| if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && |
| elems.timeout_int && elems.timeout_int_len == 5 && |
| elems.timeout_int[0] == WLAN_TIMEOUT_ASSOC_COMEBACK) { |
| u32 tu, ms; |
| tu = get_unaligned_le32(elems.timeout_int + 1); |
| ms = tu * 1024 / 1000; |
| printk(KERN_DEBUG "%s: %pM rejected association temporarily; " |
| "comeback duration %u TU (%u ms)\n", |
| sdata->name, mgmt->sa, tu, ms); |
| wk->timeout = jiffies + msecs_to_jiffies(ms); |
| if (ms > IEEE80211_ASSOC_TIMEOUT) |
| run_again(local, wk->timeout); |
| return WORK_ACT_NONE; |
| } |
| |
| if (status_code != WLAN_STATUS_SUCCESS) |
| printk(KERN_DEBUG "%s: %pM denied association (code=%d)\n", |
| sdata->name, mgmt->sa, status_code); |
| else |
| printk(KERN_DEBUG "%s: associated\n", sdata->name); |
| |
| return WORK_ACT_DONE; |
| } |
| |
| static enum work_action __must_check |
| ieee80211_rx_mgmt_probe_resp(struct ieee80211_work *wk, |
| struct ieee80211_mgmt *mgmt, size_t len, |
| struct ieee80211_rx_status *rx_status) |
| { |
| struct ieee80211_sub_if_data *sdata = wk->sdata; |
| struct ieee80211_local *local = sdata->local; |
| size_t baselen; |
| |
| ASSERT_WORK_MTX(local); |
| |
| if (wk->type != IEEE80211_WORK_DIRECT_PROBE) |
| return WORK_ACT_MISMATCH; |
| |
| if (len < 24 + 12) |
| return WORK_ACT_NONE; |
| |
| baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; |
| if (baselen > len) |
| return WORK_ACT_NONE; |
| |
| printk(KERN_DEBUG "%s: direct probe responded\n", sdata->name); |
| return WORK_ACT_DONE; |
| } |
| |
| static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_rx_status *rx_status; |
| struct ieee80211_mgmt *mgmt; |
| struct ieee80211_work *wk; |
| enum work_action rma; |
| u16 fc; |
| |
| rx_status = (struct ieee80211_rx_status *) skb->cb; |
| mgmt = (struct ieee80211_mgmt *) skb->data; |
| fc = le16_to_cpu(mgmt->frame_control); |
| |
| mutex_lock(&local->work_mtx); |
| |
| list_for_each_entry(wk, &local->work_list, list) { |
| const u8 *bssid = NULL; |
| |
| switch (wk->type) { |
| case IEEE80211_WORK_DIRECT_PROBE: |
| case IEEE80211_WORK_AUTH: |
| case IEEE80211_WORK_ASSOC: |
| bssid = wk->filter_ta; |
| break; |
| default: |
| continue; |
| } |
| |
| /* |
| * Before queuing, we already verified mgmt->sa, |
| * so this is needed just for matching. |
| */ |
| if (compare_ether_addr(bssid, mgmt->bssid)) |
| continue; |
| |
| switch (fc & IEEE80211_FCTL_STYPE) { |
| case IEEE80211_STYPE_PROBE_RESP: |
| rma = ieee80211_rx_mgmt_probe_resp(wk, mgmt, skb->len, |
| rx_status); |
| break; |
| case IEEE80211_STYPE_AUTH: |
| rma = ieee80211_rx_mgmt_auth(wk, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_ASSOC_RESP: |
| rma = ieee80211_rx_mgmt_assoc_resp(wk, mgmt, |
| skb->len, false); |
| break; |
| case IEEE80211_STYPE_REASSOC_RESP: |
| rma = ieee80211_rx_mgmt_assoc_resp(wk, mgmt, |
| skb->len, true); |
| break; |
| default: |
| WARN_ON(1); |
| rma = WORK_ACT_NONE; |
| } |
| |
| /* |
| * We've either received an unexpected frame, or we have |
| * multiple work items and need to match the frame to the |
| * right one. |
| */ |
| if (rma == WORK_ACT_MISMATCH) |
| continue; |
| |
| /* |
| * We've processed this frame for that work, so it can't |
| * belong to another work struct. |
| * NB: this is also required for correctness for 'rma'! |
| */ |
| break; |
| } |
| |
| switch (rma) { |
| case WORK_ACT_MISMATCH: |
| /* ignore this unmatched frame */ |
| break; |
| case WORK_ACT_NONE: |
| break; |
| case WORK_ACT_DONE: |
| list_del_rcu(&wk->list); |
| break; |
| default: |
| WARN(1, "unexpected: %d", rma); |
| } |
| |
| mutex_unlock(&local->work_mtx); |
| |
| if (rma != WORK_ACT_DONE) |
| goto out; |
| |
| switch (wk->done(wk, skb)) { |
| case WORK_DONE_DESTROY: |
| free_work(wk); |
| break; |
| case WORK_DONE_REQUEUE: |
| synchronize_rcu(); |
| wk->started = false; /* restart */ |
| mutex_lock(&local->work_mtx); |
| list_add_tail(&wk->list, &local->work_list); |
| mutex_unlock(&local->work_mtx); |
| } |
| |
| out: |
| kfree_skb(skb); |
| } |
| |
| static void ieee80211_work_timer(unsigned long data) |
| { |
| struct ieee80211_local *local = (void *) data; |
| |
| if (local->quiescing) |
| return; |
| |
| ieee80211_queue_work(&local->hw, &local->work_work); |
| } |
| |
| static void ieee80211_work_work(struct work_struct *work) |
| { |
| struct ieee80211_local *local = |
| container_of(work, struct ieee80211_local, work_work); |
| struct sk_buff *skb; |
| struct ieee80211_work *wk, *tmp; |
| LIST_HEAD(free_work); |
| enum work_action rma; |
| bool remain_off_channel = false; |
| |
| if (local->scanning) |
| return; |
| |
| /* |
| * ieee80211_queue_work() should have picked up most cases, |
| * here we'll pick the the rest. |
| */ |
| if (WARN(local->suspended, "work scheduled while going to suspend\n")) |
| return; |
| |
| /* first process frames to avoid timing out while a frame is pending */ |
| while ((skb = skb_dequeue(&local->work_skb_queue))) |
| ieee80211_work_rx_queued_mgmt(local, skb); |
| |
| ieee80211_recalc_idle(local); |
| |
| mutex_lock(&local->work_mtx); |
| |
| list_for_each_entry_safe(wk, tmp, &local->work_list, list) { |
| bool started = wk->started; |
| |
| /* mark work as started if it's on the current off-channel */ |
| if (!started && local->tmp_channel && |
| wk->chan == local->tmp_channel && |
| wk->chan_type == local->tmp_channel_type) { |
| started = true; |
| wk->timeout = jiffies; |
| } |
| |
| if (!started && !local->tmp_channel) { |
| /* |
| * TODO: could optimize this by leaving the |
| * station vifs in awake mode if they |
| * happen to be on the same channel as |
| * the requested channel |
| */ |
| ieee80211_offchannel_stop_beaconing(local); |
| ieee80211_offchannel_stop_station(local); |
| |
| local->tmp_channel = wk->chan; |
| local->tmp_channel_type = wk->chan_type; |
| ieee80211_hw_config(local, 0); |
| started = true; |
| wk->timeout = jiffies; |
| } |
| |
| /* don't try to work with items that aren't started */ |
| if (!started) |
| continue; |
| |
| if (time_is_after_jiffies(wk->timeout)) { |
| /* |
| * This work item isn't supposed to be worked on |
| * right now, but take care to adjust the timer |
| * properly. |
| */ |
| run_again(local, wk->timeout); |
| continue; |
| } |
| |
| switch (wk->type) { |
| default: |
| WARN_ON(1); |
| /* nothing */ |
| rma = WORK_ACT_NONE; |
| break; |
| case IEEE80211_WORK_ABORT: |
| rma = WORK_ACT_TIMEOUT; |
| break; |
| case IEEE80211_WORK_DIRECT_PROBE: |
| rma = ieee80211_direct_probe(wk); |
| break; |
| case IEEE80211_WORK_AUTH: |
| rma = ieee80211_authenticate(wk); |
| break; |
| case IEEE80211_WORK_ASSOC: |
| rma = ieee80211_associate(wk); |
| break; |
| case IEEE80211_WORK_REMAIN_ON_CHANNEL: |
| rma = ieee80211_remain_on_channel_timeout(wk); |
| break; |
| } |
| |
| wk->started = started; |
| |
| switch (rma) { |
| case WORK_ACT_NONE: |
| /* might have changed the timeout */ |
| run_again(local, wk->timeout); |
| break; |
| case WORK_ACT_TIMEOUT: |
| list_del_rcu(&wk->list); |
| synchronize_rcu(); |
| list_add(&wk->list, &free_work); |
| break; |
| default: |
| WARN(1, "unexpected: %d", rma); |
| } |
| } |
| |
| list_for_each_entry(wk, &local->work_list, list) { |
| if (!wk->started) |
| continue; |
| if (wk->chan != local->tmp_channel) |
| continue; |
| if (wk->chan_type != local->tmp_channel_type) |
| continue; |
| remain_off_channel = true; |
| } |
| |
| if (!remain_off_channel && local->tmp_channel) { |
| local->tmp_channel = NULL; |
| ieee80211_hw_config(local, 0); |
| ieee80211_offchannel_return(local, true); |
| /* give connection some time to breathe */ |
| run_again(local, jiffies + HZ/2); |
| } |
| |
| mutex_lock(&local->scan_mtx); |
| |
| if (list_empty(&local->work_list) && local->scan_req && |
| !local->scanning) |
| ieee80211_queue_delayed_work(&local->hw, |
| &local->scan_work, |
| round_jiffies_relative(0)); |
| |
| mutex_unlock(&local->scan_mtx); |
| |
| mutex_unlock(&local->work_mtx); |
| |
| ieee80211_recalc_idle(local); |
| |
| list_for_each_entry_safe(wk, tmp, &free_work, list) { |
| wk->done(wk, NULL); |
| list_del(&wk->list); |
| kfree(wk); |
| } |
| } |
| |
| void ieee80211_add_work(struct ieee80211_work *wk) |
| { |
| struct ieee80211_local *local; |
| |
| if (WARN_ON(!wk->chan)) |
| return; |
| |
| if (WARN_ON(!wk->sdata)) |
| return; |
| |
| if (WARN_ON(!wk->done)) |
| return; |
| |
| if (WARN_ON(!ieee80211_sdata_running(wk->sdata))) |
| return; |
| |
| wk->started = false; |
| |
| local = wk->sdata->local; |
| mutex_lock(&local->work_mtx); |
| list_add_tail(&wk->list, &local->work_list); |
| mutex_unlock(&local->work_mtx); |
| |
| ieee80211_queue_work(&local->hw, &local->work_work); |
| } |
| |
| void ieee80211_work_init(struct ieee80211_local *local) |
| { |
| mutex_init(&local->work_mtx); |
| INIT_LIST_HEAD(&local->work_list); |
| setup_timer(&local->work_timer, ieee80211_work_timer, |
| (unsigned long)local); |
| INIT_WORK(&local->work_work, ieee80211_work_work); |
| skb_queue_head_init(&local->work_skb_queue); |
| } |
| |
| void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_work *wk; |
| |
| mutex_lock(&local->work_mtx); |
| list_for_each_entry(wk, &local->work_list, list) { |
| if (wk->sdata != sdata) |
| continue; |
| wk->type = IEEE80211_WORK_ABORT; |
| wk->started = true; |
| wk->timeout = jiffies; |
| } |
| mutex_unlock(&local->work_mtx); |
| |
| /* run cleanups etc. */ |
| ieee80211_work_work(&local->work_work); |
| |
| mutex_lock(&local->work_mtx); |
| list_for_each_entry(wk, &local->work_list, list) { |
| if (wk->sdata != sdata) |
| continue; |
| WARN_ON(1); |
| break; |
| } |
| mutex_unlock(&local->work_mtx); |
| } |
| |
| ieee80211_rx_result ieee80211_work_rx_mgmt(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_mgmt *mgmt; |
| struct ieee80211_work *wk; |
| u16 fc; |
| |
| if (skb->len < 24) |
| return RX_DROP_MONITOR; |
| |
| mgmt = (struct ieee80211_mgmt *) skb->data; |
| fc = le16_to_cpu(mgmt->frame_control); |
| |
| list_for_each_entry_rcu(wk, &local->work_list, list) { |
| if (sdata != wk->sdata) |
| continue; |
| if (compare_ether_addr(wk->filter_ta, mgmt->sa)) |
| continue; |
| if (compare_ether_addr(wk->filter_ta, mgmt->bssid)) |
| continue; |
| |
| switch (fc & IEEE80211_FCTL_STYPE) { |
| case IEEE80211_STYPE_AUTH: |
| case IEEE80211_STYPE_PROBE_RESP: |
| case IEEE80211_STYPE_ASSOC_RESP: |
| case IEEE80211_STYPE_REASSOC_RESP: |
| skb_queue_tail(&local->work_skb_queue, skb); |
| ieee80211_queue_work(&local->hw, &local->work_work); |
| return RX_QUEUED; |
| } |
| } |
| |
| return RX_CONTINUE; |
| } |
| |
| static enum work_done_result ieee80211_remain_done(struct ieee80211_work *wk, |
| struct sk_buff *skb) |
| { |
| /* |
| * We are done serving the remain-on-channel command. |
| */ |
| cfg80211_remain_on_channel_expired(wk->sdata->dev, (unsigned long) wk, |
| wk->chan, wk->chan_type, |
| GFP_KERNEL); |
| |
| return WORK_DONE_DESTROY; |
| } |
| |
| int ieee80211_wk_remain_on_channel(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_channel *chan, |
| enum nl80211_channel_type channel_type, |
| unsigned int duration, u64 *cookie) |
| { |
| struct ieee80211_work *wk; |
| |
| wk = kzalloc(sizeof(*wk), GFP_KERNEL); |
| if (!wk) |
| return -ENOMEM; |
| |
| wk->type = IEEE80211_WORK_REMAIN_ON_CHANNEL; |
| wk->chan = chan; |
| wk->chan_type = channel_type; |
| wk->sdata = sdata; |
| wk->done = ieee80211_remain_done; |
| |
| wk->remain.duration = duration; |
| |
| *cookie = (unsigned long) wk; |
| |
| ieee80211_add_work(wk); |
| |
| return 0; |
| } |
| |
| int ieee80211_wk_cancel_remain_on_channel(struct ieee80211_sub_if_data *sdata, |
| u64 cookie) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_work *wk, *tmp; |
| bool found = false; |
| |
| mutex_lock(&local->work_mtx); |
| list_for_each_entry_safe(wk, tmp, &local->work_list, list) { |
| if ((unsigned long) wk == cookie) { |
| wk->timeout = jiffies; |
| found = true; |
| break; |
| } |
| } |
| mutex_unlock(&local->work_mtx); |
| |
| if (!found) |
| return -ENOENT; |
| |
| ieee80211_queue_work(&local->hw, &local->work_work); |
| |
| return 0; |
| } |