ixgbe: Add support for pipeline reset
Calling the ixgbe_reset_pipeline_82599 function will ensure a full pipeline
reset on all 82599 devices. This is necessary to avoid possible link issues.
Since this patch accomplishes this by modifying AUTOC.LMS we need to wrap
all AUTOC writes when LESM is enabled.
v2- fix LMS behaviour based on feedback by Martin Josefsson
CC: Martin Josefsson <gandalf@mjufs.se>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index b527813..e75f5a4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -62,7 +62,6 @@
bool autoneg,
bool autoneg_wait_to_complete);
static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
-static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
@@ -99,9 +98,8 @@
static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
{
s32 ret_val = 0;
- u32 reg_anlp1 = 0;
- u32 i = 0;
u16 list_offset, data_offset, data_value;
+ bool got_lock = false;
if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
ixgbe_init_mac_link_ops_82599(hw);
@@ -137,28 +135,36 @@
usleep_range(hw->eeprom.semaphore_delay * 1000,
hw->eeprom.semaphore_delay * 2000);
- /* Now restart DSP by setting Restart_AN and clearing LMS */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
- IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) |
- IXGBE_AUTOC_AN_RESTART));
+ /* Need SW/FW semaphore around AUTOC writes if LESM on,
+ * likewise reset_pipeline requires lock as it also writes
+ * AUTOC.
+ */
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val)
+ goto setup_sfp_out;
- /* Wait for AN to leave state 0 */
- for (i = 0; i < 10; i++) {
- usleep_range(4000, 8000);
- reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
- if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
- break;
+ got_lock = true;
}
- if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) {
- hw_dbg(hw, "sfp module setup not complete\n");
+
+ /* Restart DSP and set SFI mode */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
+ IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL));
+
+ ret_val = ixgbe_reset_pipeline_82599(hw);
+
+ if (got_lock) {
+ hw->mac.ops.release_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ got_lock = false;
+ }
+
+ if (ret_val) {
+ hw_dbg(hw, " sfp module setup not complete\n");
ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
goto setup_sfp_out;
}
-
- /* Restart DSP by setting Restart_AN and return to SFI mode */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
- IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL |
- IXGBE_AUTOC_AN_RESTART));
}
setup_sfp_out:
@@ -394,14 +400,26 @@
u32 links_reg;
u32 i;
s32 status = 0;
+ bool got_lock = false;
+
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ status = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (status)
+ goto out;
+
+ got_lock = true;
+ }
/* Restart link */
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+ ixgbe_reset_pipeline_82599(hw);
+
+ if (got_lock)
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
/* Only poll for autoneg to complete if specified to do so */
if (autoneg_wait_to_complete) {
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
IXGBE_AUTOC_LMS_KX4_KX_KR ||
(autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
@@ -425,6 +443,7 @@
/* Add delay to filter out noises during initial link setup */
msleep(50);
+out:
return status;
}
@@ -779,6 +798,7 @@
u32 links_reg;
u32 i;
ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+ bool got_lock = false;
/* Check to see if speed passed in is supported. */
status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities,
@@ -836,9 +856,26 @@
}
if (autoc != start_autoc) {
+ /* Need SW/FW semaphore around AUTOC writes if LESM is on,
+ * likewise reset_pipeline requires us to hold this lock as
+ * it also writes to AUTOC.
+ */
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ status = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (status != 0)
+ goto out;
+
+ got_lock = true;
+ }
+
/* Restart link */
- autoc |= IXGBE_AUTOC_AN_RESTART;
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+ ixgbe_reset_pipeline_82599(hw);
+
+ if (got_lock)
+ hw->mac.ops.release_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
/* Only poll for autoneg to complete if specified to do so */
if (autoneg_wait_to_complete) {
@@ -994,9 +1031,28 @@
hw->mac.orig_autoc2 = autoc2;
hw->mac.orig_link_settings_stored = true;
} else {
- if (autoc != hw->mac.orig_autoc)
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
- IXGBE_AUTOC_AN_RESTART));
+ if (autoc != hw->mac.orig_autoc) {
+ /* Need SW/FW semaphore around AUTOC writes if LESM is
+ * on, likewise reset_pipeline requires us to hold
+ * this lock as it also writes to AUTOC.
+ */
+ bool got_lock = false;
+ if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
+ status = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (status)
+ goto reset_hw_out;
+
+ got_lock = true;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
+ ixgbe_reset_pipeline_82599(hw);
+
+ if (got_lock)
+ hw->mac.ops.release_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ }
if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
(hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
@@ -1983,7 +2039,7 @@
* Returns true if the LESM FW module is present and enabled. Otherwise
* returns false. Smart Speed must be disabled if LESM FW module is enabled.
**/
-static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
{
bool lesm_enabled = false;
u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;