drm/i915/bxt: Don't toggle power well 1 on-demand
Power well 1 is managed by the DMC firmware so don't toggle it on-demand
from the driver. This means we need to follow the BSpec display
initialization sequence during driver loading and resuming (both system
and runtime) and enable power well 1 only once there. Afterwards DMC
will toggle power well 1 whenever entering/exiting DC5.
For this to work we also need to do away getting the PLL power domain,
since that just kept runtime PM disabled for good.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-12-git-send-email-imre.deak@intel.com
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 7fe2ba9..e3f70c53 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -419,25 +419,13 @@
BIT(POWER_DOMAIN_VGA) | \
BIT(POWER_DOMAIN_GMBUS) | \
BIT(POWER_DOMAIN_INIT))
-#define BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS ( \
- BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
- BIT(POWER_DOMAIN_PIPE_A) | \
- BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
- BIT(POWER_DOMAIN_TRANSCODER_DSI_A) | \
- BIT(POWER_DOMAIN_TRANSCODER_DSI_C) | \
- BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
- BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
- BIT(POWER_DOMAIN_PORT_DSI) | \
- BIT(POWER_DOMAIN_AUX_A) | \
- BIT(POWER_DOMAIN_PLLS) | \
- BIT(POWER_DOMAIN_INIT))
#define BXT_DISPLAY_DC_OFF_POWER_DOMAINS ( \
BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
BIT(POWER_DOMAIN_MODESET) | \
BIT(POWER_DOMAIN_AUX_A) | \
BIT(POWER_DOMAIN_INIT))
#define BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \
- (POWER_DOMAIN_MASK & ~(BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS | \
+ (POWER_DOMAIN_MASK & ~( \
BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS)) | \
BIT(POWER_DOMAIN_INIT))
@@ -1945,7 +1933,7 @@
},
{
.name = "power well 1",
- .domains = BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS,
+ .domains = 0,
.ops = &skl_power_well_ops,
.data = SKL_DISP_PW_1,
},
@@ -2181,6 +2169,61 @@
mutex_unlock(&power_domains->lock);
}
+void bxt_display_core_init(struct drm_i915_private *dev_priv,
+ bool resume)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *well;
+ uint32_t val;
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ /*
+ * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
+ * or else the reset will hang because there is no PCH to respond.
+ * Move the handshake programming to initialization sequence.
+ * Previously was left up to BIOS.
+ */
+ val = I915_READ(HSW_NDE_RSTWRN_OPT);
+ val &= ~RESET_PCH_HANDSHAKE_ENABLE;
+ I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
+
+ /* Enable PG1 */
+ mutex_lock(&power_domains->lock);
+
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_enable(dev_priv, well);
+
+ mutex_unlock(&power_domains->lock);
+
+ broxton_init_cdclk(dev_priv);
+ broxton_ddi_phy_init(dev_priv);
+
+ if (resume && dev_priv->csr.dmc_payload)
+ intel_csr_load_program(dev_priv);
+}
+
+void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *well;
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ broxton_ddi_phy_uninit(dev_priv);
+ broxton_uninit_cdclk(dev_priv);
+
+ /* The spec doesn't call for removing the reset handshake flag */
+
+ /* Disable PG1 */
+ mutex_lock(&power_domains->lock);
+
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_disable(dev_priv, well);
+
+ mutex_unlock(&power_domains->lock);
+}
+
static void chv_phy_control_init(struct drm_i915_private *dev_priv)
{
struct i915_power_well *cmn_bc =
@@ -2312,6 +2355,8 @@
if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
skl_display_core_init(dev_priv, resume);
+ } else if (IS_BROXTON(dev)) {
+ bxt_display_core_init(dev_priv, resume);
} else if (IS_CHERRYVIEW(dev)) {
mutex_lock(&power_domains->lock);
chv_phy_control_init(dev_priv);
@@ -2349,6 +2394,8 @@
if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
skl_display_core_uninit(dev_priv);
+ else if (IS_BROXTON(dev_priv))
+ bxt_display_core_uninit(dev_priv);
}
/**