USB: serial: add support for multiple read urbs
Add support for multiple read urbs to generic read implementation.
Use a static array of two read urbs for now which is enough to get a
50% throughput increase in one test setup.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index bfbe6e5..8d5190f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -562,7 +562,8 @@
{
int i;
- usb_kill_urb(port->read_urb);
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+ usb_kill_urb(port->read_urbs[i]);
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
usb_kill_urb(port->write_urbs[i]);
/*
@@ -594,15 +595,17 @@
kill_traffic(port);
cancel_work_sync(&port->work);
- usb_free_urb(port->read_urb);
usb_free_urb(port->interrupt_in_urb);
usb_free_urb(port->interrupt_out_urb);
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
+ usb_free_urb(port->read_urbs[i]);
+ kfree(port->bulk_in_buffers[i]);
+ }
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
usb_free_urb(port->write_urbs[i]);
kfree(port->bulk_out_buffers[i]);
}
kfifo_free(&port->write_fifo);
- kfree(port->bulk_in_buffer);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
kfree(port);
@@ -721,6 +724,7 @@
unsigned int minor;
int buffer_size;
int i;
+ int j;
int num_interrupt_in = 0;
int num_interrupt_out = 0;
int num_bulk_in = 0;
@@ -903,31 +907,39 @@
for (i = 0; i < num_bulk_in; ++i) {
endpoint = bulk_in_endpoint[i];
port = serial->port[i];
- port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port->read_urb) {
- dev_err(&interface->dev, "No free urbs available\n");
- goto probe_error;
- }
buffer_size = max_t(int, serial->type->bulk_in_size,
usb_endpoint_maxp(endpoint));
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
- port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!port->bulk_in_buffer) {
- dev_err(&interface->dev,
+
+ for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) {
+ set_bit(j, &port->read_urbs_free);
+ port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!port->read_urbs[j]) {
+ dev_err(&interface->dev,
+ "No free urbs available\n");
+ goto probe_error;
+ }
+ port->bulk_in_buffers[j] = kmalloc(buffer_size,
+ GFP_KERNEL);
+ if (!port->bulk_in_buffers[j]) {
+ dev_err(&interface->dev,
"Couldn't allocate bulk_in_buffer\n");
- goto probe_error;
- }
- usb_fill_bulk_urb(port->read_urb, dev,
- usb_rcvbulkpipe(dev,
+ goto probe_error;
+ }
+ usb_fill_bulk_urb(port->read_urbs[j], dev,
+ usb_rcvbulkpipe(dev,
endpoint->bEndpointAddress),
- port->bulk_in_buffer, buffer_size,
- serial->type->read_bulk_callback, port);
+ port->bulk_in_buffers[j], buffer_size,
+ serial->type->read_bulk_callback,
+ port);
+ }
+
+ port->read_urb = port->read_urbs[0];
+ port->bulk_in_buffer = port->bulk_in_buffers[0];
}
for (i = 0; i < num_bulk_out; ++i) {
- int j;
-
endpoint = bulk_out_endpoint[i];
port = serial->port[i];
if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))