ath9k: Cleanup debug messages
Clean debug messages to use appropriate levels,
remove useless messages, and trim the number of
debug levels.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath9k/eeprom.c b/drivers/net/wireless/ath9k/eeprom.c
index ffc36b0..44fee5a 100644
--- a/drivers/net/wireless/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath9k/eeprom.c
@@ -783,11 +783,11 @@
((pdadcValues[4 * j + 3] & 0xFF) << 24);
REG_WRITE(ah, regOffset, reg32);
- DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
"PDADC (%d,%4x): %4.4x %8.8x\n",
i, regChainOffset, regOffset,
reg32);
- DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
"PDADC: Chain %d | "
"PDADC %3d Value %3d | "
"PDADC %3d Value %3d | "
@@ -910,7 +910,7 @@
ah->eep_ops->get_eeprom_rev(ah) <= 2)
twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
- DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
"EXT_ADDITIVE %d\n",
ctlMode, numCtlModes, isHt40CtlMode,
@@ -918,7 +918,7 @@
for (i = 0; (i < AR5416_NUM_CTLS) &&
pEepData->ctlIndex[i]; i++) {
- DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
"pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
"chan %d\n",
@@ -941,7 +941,7 @@
IS_CHAN_2GHZ(chan),
AR5416_EEP4K_NUM_BAND_EDGES);
- DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" MATCH-EE_IDX %d: ch %d is2 %d "
"2xMinEdge %d chainmask %d chains %d\n",
i, freq, IS_CHAN_2GHZ(chan),
@@ -961,7 +961,7 @@
minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
- DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" SEL-Min ctlMode %d pCtlMode %d "
"2xMaxEdge %d sP %d minCtlPwr %d\n",
ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
@@ -2234,11 +2234,11 @@
((pdadcValues[4 * j + 3] & 0xFF) << 24);
REG_WRITE(ah, regOffset, reg32);
- DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
"PDADC (%d,%4x): %4.4x %8.8x\n",
i, regChainOffset, regOffset,
reg32);
- DPRINTF(ah->ah_sc, ATH_DBG_REG_IO,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
"PDADC: Chain %d | PDADC %3d "
"Value %3d | PDADC %3d Value %3d | "
"PDADC %3d Value %3d | PDADC %3d "
@@ -2415,14 +2415,14 @@
ah->eep_ops->get_eeprom_rev(ah) <= 2)
twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
- DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
"EXT_ADDITIVE %d\n",
ctlMode, numCtlModes, isHt40CtlMode,
(pCtlMode[ctlMode] & EXT_ADDITIVE));
for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
- DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
"pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
"chan %d\n",
@@ -2441,7 +2441,7 @@
rep->ctlEdges[ar5416_get_ntxchains(tx_chainmask) - 1],
IS_CHAN_2GHZ(chan), AR5416_NUM_BAND_EDGES);
- DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" MATCH-EE_IDX %d: ch %d is2 %d "
"2xMinEdge %d chainmask %d chains %d\n",
i, freq, IS_CHAN_2GHZ(chan),
@@ -2460,7 +2460,7 @@
minCtlPower = min(twiceMaxEdgePower, scaledPower);
- DPRINTF(ah->ah_sc, ATH_DBG_POWER_MGMT,
+ DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
" SEL-Min ctlMode %d pCtlMode %d "
"2xMaxEdge %d sP %d minCtlPwr %d\n",
ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,