mtd: nand: remove NAND_BBT_SCANEMPTY
NAND_BBT_SCANEMPTY is a strange, badly-supported option with omap as its
single remaining user.
NAND_BBT_SCANEMPTY was likely used by accident in omap2[1]. And anyway,
omap2 doesn't scan the chip for bad blocks (courtesy of
NAND_SKIP_BBTSCAN), and so its use of this option is irrelevant.
This patch drops the NAND_BBT_SCANEMPTY option.
[1] http://lists.infradead.org/pipermail/linux-mtd/2012-July/042902.html
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Ivan Djelic <ivan.djelic@parrot.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index ae3fb58..bc06196 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -110,33 +110,17 @@
* @td: search pattern descriptor
*
* Check for a pattern at the given place. Used to search bad block tables and
- * good / bad block identifiers. If the SCAN_EMPTY option is set then check, if
- * all bytes except the pattern area contain 0xff.
+ * good / bad block identifiers.
*/
static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
{
- int end = 0;
- uint8_t *p = buf;
-
if (td->options & NAND_BBT_NO_OOB)
return check_pattern_no_oob(buf, td);
- end = paglen + td->offs;
- if (td->options & NAND_BBT_SCANEMPTY)
- if (memchr_inv(p, 0xff, end))
- return -1;
- p += end;
-
/* Compare the pattern */
- if (memcmp(p, td->pattern, td->len))
+ if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
return -1;
- if (td->options & NAND_BBT_SCANEMPTY) {
- p += td->len;
- end += td->len;
- if (memchr_inv(p, 0xff, len - end))
- return -1;
- }
return 0;
}
@@ -507,15 +491,9 @@
else
numpages = 1;
- if (!(bd->options & NAND_BBT_SCANEMPTY)) {
- /* We need only read few bytes from the OOB area */
- scanlen = 0;
- readlen = bd->len;
- } else {
- /* Full page content should be read */
- scanlen = mtd->writesize + mtd->oobsize;
- readlen = numpages * mtd->writesize;
- }
+ /* We need only read few bytes from the OOB area */
+ scanlen = 0;
+ readlen = bd->len;
if (chip == -1) {
numblocks = mtd->size >> this->bbt_erase_shift;
@@ -882,7 +860,6 @@
{
struct nand_chip *this = mtd->priv;
- bd->options &= ~NAND_BBT_SCANEMPTY;
return create_bbt(mtd, this->buffers->databuf, bd, -1);
}