Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree conversions and enablement from Olof Johansson:
"Continued device tree conversion and enablement across a number of
platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
smaller series as well.
ux500 has seen continued conversion for platforms. Several platforms
have seen pinctrl-via-devicetree conversions for simpler
multiplatform. Tegra is adding data for new devices/drivers, and
Exynos has a bunch of new bindings and devices added as well.
So, pretty much the same progression in the right direction as the
last few releases."
Fix up conflicts as per Olof.
* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
ARM: ux500: Rename dbx500 cpufreq code to be more generic
ARM: dts: add missing ux500 device trees
ARM: ux500: Stop registering the PCM driver from platform code
ARM: ux500: Move board specific GPIO info out to subordinate DTS files
ARM: ux500: Disable the MMCI gpio-regulator by default
ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
ARM: Kirkwood: Add support LED of OpenBlocks A6
ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
ARM: kirkwood: Add support DT of second I2C bus
ARM: kirkwood: Convert mplcec4 board to pinctrl
ARM: Kirkwood: Convert km_kirkwood to pinctrl
ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
ARM: Kirkwood: Convert IX2-200 to pinctrl.
ARM: Kirkwood: Convert lsxl boards to pinctrl.
ARM: Kirkwood: Convert ib62x0 to pinctrl.
ARM: Kirkwood: Convert GoFlex Net to pinctrl.
ARM: Kirkwood: Convert dreamplug to pinctrl.
ARM: Kirkwood: Convert dockstar to pinctrl.
...
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index 6528e21..5216b41 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -4,14 +4,13 @@
to gate power to one or more peripherals on the processor.
Required Properties:
-- compatiable: should be one of the following.
+- compatible: should be one of the following.
* samsung,exynos4210-pd - for exynos4210 type power domain.
- reg: physical base address of the controller and length of memory mapped
region.
-Optional Properties:
-- samsung,exynos4210-pd-off: Specifies that the power domain is in turned-off
- state during boot and remains to be turned-off until explicitly turned-on.
+Node of a device using power domains must have a samsung,power-domain property
+defined with a phandle to respective power domain.
Example:
@@ -19,3 +18,11 @@
compatible = "samsung,exynos4210-pd";
reg = <0x10023C00 0x10>;
};
+
+Example of the node using power domain:
+
+ node {
+ /* ... */
+ samsung,power-domain = <&lcd0>;
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index ac9e751..f798187 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -41,6 +41,10 @@
Required root node properties:
- compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
Generic i.MX boards
-------------------
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
new file mode 100644
index 0000000..37824fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
@@ -0,0 +1,14 @@
+* Samsung SATA PHY Controller
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "samsung,exynos5-sata-phy"
+- reg : <registers mapping>
+
+Example:
+ sata@ffe07000 {
+ compatible = "samsung,exynos5-sata-phy";
+ reg = <0xffe07000 0x1000>;
+ };
diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt
new file mode 100644
index 0000000..0849f10
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt
@@ -0,0 +1,17 @@
+* Samsung AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "samsung,exynos5-sata"
+- interrupts : <interrupt mapping for SATA IRQ>
+- reg : <registers mapping>
+- samsung,sata-freq : <frequency in MHz>
+
+Example:
+ sata@ffe08000 {
+ compatible = "samsung,exynos5-sata";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
new file mode 100644
index 0000000..c2a3525
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -0,0 +1,162 @@
+* Clock bindings for Freescale i.MX25
+
+Required properties:
+- compatible: Should be "fsl,imx25-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX25
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ dummy 0
+ osc 1
+ mpll 2
+ upll 3
+ mpll_cpu_3_4 4
+ cpu_sel 5
+ cpu 6
+ ahb 7
+ usb_div 8
+ ipg 9
+ per0_sel 10
+ per1_sel 11
+ per2_sel 12
+ per3_sel 13
+ per4_sel 14
+ per5_sel 15
+ per6_sel 16
+ per7_sel 17
+ per8_sel 18
+ per9_sel 19
+ per10_sel 20
+ per11_sel 21
+ per12_sel 22
+ per13_sel 23
+ per14_sel 24
+ per15_sel 25
+ per0 26
+ per1 27
+ per2 28
+ per3 29
+ per4 30
+ per5 31
+ per6 32
+ per7 33
+ per8 34
+ per9 35
+ per10 36
+ per11 37
+ per12 38
+ per13 39
+ per14 40
+ per15 41
+ csi_ipg_per 42
+ epit_ipg_per 43
+ esai_ipg_per 44
+ esdhc1_ipg_per 45
+ esdhc2_ipg_per 46
+ gpt_ipg_per 47
+ i2c_ipg_per 48
+ lcdc_ipg_per 49
+ nfc_ipg_per 50
+ owire_ipg_per 51
+ pwm_ipg_per 52
+ sim1_ipg_per 53
+ sim2_ipg_per 54
+ ssi1_ipg_per 55
+ ssi2_ipg_per 56
+ uart_ipg_per 57
+ ata_ahb 58
+ reserved 59
+ csi_ahb 60
+ emi_ahb 61
+ esai_ahb 62
+ esdhc1_ahb 63
+ esdhc2_ahb 64
+ fec_ahb 65
+ lcdc_ahb 66
+ rtic_ahb 67
+ sdma_ahb 68
+ slcdc_ahb 69
+ usbotg_ahb 70
+ reserved 71
+ reserved 72
+ reserved 73
+ reserved 74
+ can1_ipg 75
+ can2_ipg 76
+ csi_ipg 77
+ cspi1_ipg 78
+ cspi2_ipg 79
+ cspi3_ipg 80
+ dryice_ipg 81
+ ect_ipg 82
+ epit1_ipg 83
+ epit2_ipg 84
+ reserved 85
+ esdhc1_ipg 86
+ esdhc2_ipg 87
+ fec_ipg 88
+ reserved 89
+ reserved 90
+ reserved 91
+ gpt1_ipg 92
+ gpt2_ipg 93
+ gpt3_ipg 94
+ gpt4_ipg 95
+ reserved 96
+ reserved 97
+ reserved 98
+ iim_ipg 99
+ reserved 100
+ reserved 101
+ kpp_ipg 102
+ lcdc_ipg 103
+ reserved 104
+ pwm1_ipg 105
+ pwm2_ipg 106
+ pwm3_ipg 107
+ pwm4_ipg 108
+ rngb_ipg 109
+ reserved 110
+ scc_ipg 111
+ sdma_ipg 112
+ sim1_ipg 113
+ sim2_ipg 114
+ slcdc_ipg 115
+ spba_ipg 116
+ ssi1_ipg 117
+ ssi2_ipg 118
+ tsc_ipg 119
+ uart1_ipg 120
+ uart2_ipg 121
+ uart3_ipg 122
+ uart4_ipg 123
+ uart5_ipg 124
+ reserved 125
+ wdt_ipg 126
+
+Examples:
+
+clks: ccm@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ clock-output-names = ...
+ "uart_ipg",
+ "uart_serial",
+ ...;
+};
+
+uart1: serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 79>, <&clks 50>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
new file mode 100644
index 0000000..23ae1db
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
@@ -0,0 +1,55 @@
+Device Tree Clock bindings for the Zynq 7000 EPP
+
+The Zynq EPP has several different clk providers, each with there own bindings.
+The purpose of this document is to document their usage.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+See Chapter 25 of Zynq TRM for more information about Zynq clocks.
+
+== PLLs ==
+
+Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
+
+Required properties:
+- #clock-cells : shall be 0 (only one clock is output from this node)
+- compatible : "xlnx,zynq-pll"
+- reg : pair of u32 values, which are the address offsets within the SLCR
+ of the relevant PLL_CTRL register and PLL_CFG register respectively
+- clocks : phandle for parent clock. should be the phandle for ps_clk
+
+Optional properties:
+- clock-output-names : name of the output clock
+
+Example:
+ armpll: armpll {
+ #clock-cells = <0>;
+ compatible = "xlnx,zynq-pll";
+ clocks = <&ps_clk>;
+ reg = <0x100 0x110>;
+ clock-output-names = "armpll";
+ };
+
+== Peripheral clocks ==
+
+Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
+
+Required properties:
+- #clock-cells : shall be 1
+- compatible : "xlnx,zynq-periph-clock"
+- reg : a single u32 value, describing the offset within the SLCR where
+ the CLK_CTRL register is found for this peripheral
+- clocks : phandle for parent clocks. should hold phandles for
+ the IO_PLL, ARM_PLL, and DDR_PLL in order
+- clock-output-names : names of the output clock(s). For peripherals that have
+ two output clocks (for example, the UART), two clocks
+ should be listed.
+
+Example:
+ uart_clk: uart_clk {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynq-periph-clock";
+ clocks = <&iopll &armpll &ddrpll>;
+ reg = <0x154>;
+ clock-output-names = "uart0_ref_clk",
+ "uart1_ref_clk";
+ };
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt
new file mode 100644
index 0000000..589edee
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmi.txt
@@ -0,0 +1,22 @@
+Device-Tree bindings for drm hdmi driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmi".
+- reg: physical base address of the hdmi and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+- hpd-gpio: following information about the hotplug gpio pin.
+ a) phandle of the gpio controller node.
+ b) pin number within the gpio controller.
+ c) pin function mode.
+ d) optional flags and pull up/down.
+ e) drive strength.
+
+Example:
+
+ hdmi {
+ compatible = "samsung,exynos5-hdmi";
+ reg = <0x14530000 0x100000>;
+ interrupts = <0 95 0>;
+ hpd-gpio = <&gpx3 7 0xf 1 3>;
+ };
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
new file mode 100644
index 0000000..fa166d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiddc driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiddc".
+- reg: I2C address of the hdmiddc device.
+
+Example:
+
+ hdmiddc {
+ compatible = "samsung,exynos5-hdmiddc";
+ reg = <0x50>;
+ };
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
new file mode 100644
index 0000000..858f4f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
@@ -0,0 +1,12 @@
+Device-Tree bindings for hdmiphy driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-hdmiphy".
+- reg: I2C address of the hdmiphy device.
+
+Example:
+
+ hdmiphy {
+ compatible = "samsung,exynos5-hdmiphy";
+ reg = <0x38>;
+ };
diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/drm/exynos/mixer.txt
new file mode 100644
index 0000000..9b2ea03
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/exynos/mixer.txt
@@ -0,0 +1,15 @@
+Device-Tree bindings for mixer driver
+
+Required properties:
+- compatible: value should be "samsung,exynos5-mixer".
+- reg: physical base address of the mixer and length of memory mapped
+ region.
+- interrupts: interrupt number to the cpu.
+
+Example:
+
+ mixer {
+ compatible = "samsung,exynos5-mixer";
+ reg = <0x14450000 0x10000>;
+ interrupts = <0 94 0>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
new file mode 100644
index 0000000..558cdf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
@@ -0,0 +1,22 @@
+GPIO line that should be set high/low to power off a device
+
+Required properties:
+- compatible : should be "gpio-poweroff".
+- gpios : The GPIO to set high/low, see "gpios property" in
+ Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
+ low to power down the board set it to "Active Low", otherwise set
+ gpio to "Active High".
+
+Optional properties:
+- input : Initially configure the GPIO line as an input. Only reconfigure
+ it to an output when the pm_power_off function is called. If this optional
+ property is not specified, the GPIO is initialized as an output in its
+ inactive state.
+
+
+Examples:
+
+gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
new file mode 100644
index 0000000..ca5a2c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
@@ -0,0 +1,28 @@
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible : "rohm,bu21013_tp"
+ - reg : I2C device address
+
+Optional properties:
+ - touch-gpio : GPIO pin registering a touch event
+ - <supply_name>-supply : Phandle to a regulator supply
+ - rohm,touch-max-x : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x : Flip touch coordinates on the X axis
+ - rohm,flip-y : Flip touch coordinates on the Y axis
+
+Example:
+
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ compatible = "rohm,bu21013_tp";
+ reg = <0x5c>;
+ touch-gpio = <&gpio2 20 0x4>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+ rohm,touch-max-x = <384>;
+ rohm,touch-max-y = <704>;
+ rohm,flip-y;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
new file mode 100644
index 0000000..67ec3d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -0,0 +1,23 @@
+* Samsung Multi Format Codec (MFC)
+
+Multi Format Codec (MFC) is the IP present in Samsung SoCs which
+supports high resolution decoding and encoding functionalities.
+The MFC device driver is a v4l2 driver which can encode/decode
+video raw/elementary streams and has support for all popular
+video codecs.
+
+Required properties:
+ - compatible : value should be either one among the following
+ (a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
+ (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
+
+ - reg : Physical base address of the IP registers and length of memory
+ mapped region.
+
+ - interrupts : MFC interrupt number to the CPU.
+
+ - samsung,mfc-r : Base address of the first memory bank used by MFC
+ for DMA contiguous memory allocation and its size.
+
+ - samsung,mfc-l : Base address of the second memory bank used by MFC
+ for DMA contiguous memory allocation and its size.
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
index 361bccb..95daf63 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -7,8 +7,10 @@
- compatible: "marvell,88f6180-pinctrl",
"marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
"marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl"
+ "marvell,98dx4122-pinctrl"
This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+It also support the 88f6281-based variant in the 98dx412x Bobcat SoCs.
Available mpp pins/groups and functions:
Note: brackets (x) are not part of the mpp name for marvell,function and given
@@ -277,3 +279,40 @@
mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync)
mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16)
mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
+
+* Marvell Bobcat 98dx4122
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd)
+mpp5 5 gpo, nand(io7), uart0(txd)
+mpp6 6 sysrst(out), spi(mosi)
+mpp7 7 gpo, pex(rsto), spi(cs)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts)
+mpp10 10 gpo, spi(sck), uart0(txd)
+mpp11 11 gpio, spi(miso), uart0(rxd)
+mpp13 13 gpio, uart1(txd)
+mpp14 14 gpio, uart1(rxd)
+mpp15 15 gpio, uart0(rts)
+mpp16 16 gpio, uart0(cts)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp34 34 gpio
+mpp35 35 gpio
+mpp36 36 gpio
+mpp37 37 gpio
+mpp38 38 gpio
+mpp39 39 gpio
+mpp40 40 gpio
+mpp41 41 gpio
+mpp42 42 gpio
+mpp43 43 gpio
+mpp44 44 gpio
+mpp45 45 gpio
+mpp49 49 gpio
+
diff --git a/Documentation/devicetree/bindings/usb/ehci-orion.txt b/Documentation/devicetree/bindings/usb/ehci-orion.txt
new file mode 100644
index 0000000..6bc09ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-orion.txt
@@ -0,0 +1,15 @@
+* EHCI controller, Orion Marvell variants
+
+Required properties:
+- compatible: must be "marvell,orion-ehci"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The EHCI interrupt
+
+Example:
+
+ ehci@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <19>;
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 770a019..902b1b1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -55,4 +55,5 @@
via VIA Technologies, Inc.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
+winbond Winbond Electronics corp.
xlnx Xilinx
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
new file mode 100644
index 0000000..2957ebb
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -0,0 +1,15 @@
+* Atmel Watchdog Timers
+
+** at91sam9-wdt
+
+Required properties:
+- compatible: must be "atmel,at91sam9260-wdt".
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+Example:
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ };
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 08330d9..3bb60c8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -536,6 +536,8 @@
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
+ select PINCTRL
+ select PINCTRL_DOVE
select PLAT_ORION_LEGACY
select USB_ARCH_HAS_EHCI
help
@@ -548,6 +550,8 @@
select GENERIC_CLOCKEVENTS
select PCI
select PCI_QUIRKS
+ select PINCTRL
+ select PINCTRL_KIRKWOOD
select PLAT_ORION_LEGACY
help
Support for the following Marvell Kirkwood series SoCs:
@@ -962,6 +966,7 @@
bool "Xilinx Zynq ARM Cortex A9 Platform"
select ARM_AMBA
select ARM_GIC
+ select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 04a3f0d..512b394 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -132,6 +132,23 @@
their output to UART1 serial port on DaVinci TNETV107X
devices.
+ config DEBUG_ZYNQ_UART0
+ bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART0 on the Zynq platform.
+
+ config DEBUG_ZYNQ_UART1
+ bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 on the Zynq platform.
+
+ If you have a ZC702 board and want early boot messages to
+ appear on the USB serial adaptor, select this option.
+
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
@@ -209,20 +226,12 @@
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
- config DEBUG_IMX6Q_UART2
- bool "i.MX6Q Debug UART2"
+ config DEBUG_IMX6Q_UART
+ bool "i.MX6Q Debug UART"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
- on i.MX6Q UART2. This is correct for e.g. the SabreLite
- board.
-
- config DEBUG_IMX6Q_UART4
- bool "i.MX6Q Debug UART4"
- depends on SOC_IMX6Q
- help
- Say Y here if you want kernel low-level debugging support
- on i.MX6Q UART4.
+ on i.MX6Q.
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
@@ -434,6 +443,15 @@
endchoice
+config DEBUG_IMX6Q_UART_PORT
+ int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART
+ range 1 5
+ default 1
+ depends on SOC_IMX6Q
+ help
+ Choose UART port on which kernel low-level debug messages
+ should be output.
+
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
@@ -443,8 +461,7 @@
DEBUG_IMX31_IMX35_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX50_IMX53_UART ||\
- DEBUG_IMX6Q_UART2 || \
- DEBUG_IMX6Q_UART4
+ DEBUG_IMX6Q_UART
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f3f2f80..2af359c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -34,6 +34,8 @@
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
+dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
+ da850-evm.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-dove-db.dtb
@@ -41,7 +43,10 @@
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos5250-smdk5250.dtb \
- exynos5440-ssdk5440.dtb
+ exynos5440-ssdk5440.dtb \
+ exynos4412-smdk4412.dtb \
+ exynos5250-smdk5250.dtb \
+ exynos5250-snow.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
@@ -79,16 +84,20 @@
imx53-qsb.dtb \
imx53-smd.dtb \
imx6q-arm2.dtb \
+ imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
+ imx28-apf28.dtb \
+ imx28-apf28dev.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
imx28-cfa10049.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
+ imx28-sps1.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle.dtb \
@@ -105,7 +114,10 @@
am335x-bone.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
+ hrefprev60.dtb \
+ hrefv60plus.dtb \
+ ccu9540.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
sh73a0-kzm9g.dtb \
@@ -137,6 +149,7 @@
dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb
+dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
targets += dtbs
endif
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index b1d3fab..c528b4b 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -479,6 +479,12 @@
trigger-external;
};
};
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 66106ee..00485e1 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -404,6 +404,12 @@
#size-cells = <0>;
status = "disabled";
};
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 0741cae..485fc395 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -473,6 +473,12 @@
#size-cells = <0>;
status = "disabled";
};
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts
new file mode 100644
index 0000000..0430546
--- /dev/null
+++ b/arch/arm/boot/dts/ccu9540.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+ model = "ST-Ericsson CCU9540 platform with Device Tree";
+ compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ soc-u9500 {
+ uart@80120000 {
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ status = "okay";
+ };
+
+ // External Micro SD slot
+ sdi0_per1@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ mmc-cap-sd-highspeed;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+ cd-gpios = <&gpio7 6 0x4>; // 230
+ cd-inverted;
+
+ status = "okay";
+ };
+
+
+ // WLAN SDIO channel
+ sdi1_per2@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+
+ status = "okay";
+ };
+
+ // On-board eMMC
+ sdi4_per2@80114000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
new file mode 100644
index 0000000..fddd174
--- /dev/null
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -0,0 +1,184 @@
+/*
+ * Common device tree include for all Exynos 5250 boards based off of Daisy.
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ aliases {
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ };
+
+ i2c@12C60000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+ gpios = <&gpb3 0 2 3 0>,
+ <&gpb3 1 2 3 0>;
+ };
+
+ i2c@12C70000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+ gpios = <&gpb3 2 2 3 0>,
+ <&gpb3 3 2 3 0>;
+ };
+
+ i2c@12C80000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ /*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+ gpios = <&gpa0 6 3 0 0>,
+ <&gpa0 7 3 0 0>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos5-hdmiddc";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@12C90000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ gpios = <&gpa1 2 3 3 0>,
+ <&gpa1 3 3 3 0>;
+ };
+
+ i2c@12CA0000 {
+ status = "disabled";
+ };
+
+ i2c@12CB0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ gpios = <&gpa2 2 3 3 0>,
+ <&gpa2 3 3 3 0>;
+ };
+
+ i2c@12CC0000 {
+ status = "disabled";
+ };
+
+ i2c@12CD0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ gpios = <&gpb2 2 3 3 0>,
+ <&gpb2 3 3 3 0>;
+ };
+
+ i2c@12CE0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos5-hdmiphy";
+ reg = <0x38>;
+ };
+ };
+
+ dwmmc0@12200000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3 3>;
+ samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+ <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+ <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
+ <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+ <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
+ };
+ };
+
+ dwmmc1@12210000 {
+ status = "disabled";
+ };
+
+ dwmmc2@12220000 {
+ num-slots = <1>;
+ supports-highspeed;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3 3>;
+ samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+ wp-gpios = <&gpc2 1 0 0 3>;
+ gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+ <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+ <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+ };
+ };
+
+ dwmmc3@12230000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3 3>;
+ samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ /* See board-specific dts files for GPIOs */
+ };
+ };
+
+ spi_0: spi@12d20000 {
+ status = "disabled";
+ };
+
+ spi_1: spi@12d30000 {
+ gpios = <&gpa2 4 2 3 0>,
+ <&gpa2 6 2 3 0>,
+ <&gpa2 7 2 3 0>;
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+ };
+
+ spi_2: spi@12d40000 {
+ status = "disabled";
+ };
+
+ hdmi {
+ hpd-gpio = <&gpx3 7 0xf 1 3>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 0 0x10000 0>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 731086b..0d69322 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -217,123 +217,103 @@
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
regulator-compatible = "db8500_vape";
- regulator-name = "db8500-vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
regulator-compatible = "db8500_varm";
- regulator-name = "db8500-varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
regulator-compatible = "db8500_vmodem";
- regulator-name = "db8500-vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
regulator-compatible = "db8500_vpll";
- regulator-name = "db8500-vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
regulator-compatible = "db8500_vsmps1";
- regulator-name = "db8500-vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
regulator-compatible = "db8500_vsmps2";
- regulator-name = "db8500-vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
regulator-compatible = "db8500_vsmps3";
- regulator-name = "db8500-vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
regulator-compatible = "db8500_vrf1";
- regulator-name = "db8500-vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
regulator-compatible = "db8500_sva_mmdsp";
- regulator-name = "db8500-sva-mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
regulator-compatible = "db8500_sva_mmdsp_ret";
- regulator-name = "db8500-sva-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
regulator-compatible = "db8500_sva_pipe";
- regulator-name = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
regulator-compatible = "db8500_sia_mmdsp";
- regulator-name = "db8500_sia_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
- regulator-name = "db8500-sia-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
regulator-compatible = "db8500_sia_pipe";
- regulator-name = "db8500-sia-pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
regulator-compatible = "db8500_sga";
- regulator-name = "db8500-sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
regulator-compatible = "db8500_b2r2_mcde";
- regulator-name = "db8500-b2r2-mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
regulator-compatible = "db8500_esram12";
- regulator-name = "db8500-esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
regulator-compatible = "db8500_esram12_ret";
- regulator-name = "db8500-esram12-ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
regulator-compatible = "db8500_esram34";
- regulator-name = "db8500-esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-compatible = "db8500_esram34_ret";
- regulator-name = "db8500-esram34-ret";
};
};
@@ -412,7 +392,6 @@
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-compatible = "ab8500_ldo_aux1";
- regulator-name = "V-DISPLAY";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
@@ -423,7 +402,6 @@
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-compatible = "ab8500_ldo_aux2";
- regulator-name = "V-eMMC1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
@@ -431,7 +409,6 @@
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-compatible = "ab8500_ldo_aux3";
- regulator-name = "V-MMC-SD";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
@@ -439,49 +416,41 @@
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
regulator-compatible = "ab8500_ldo_initcore";
- regulator-name = "V-INTCORE";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-compatible = "ab8500_ldo_tvout";
- regulator-name = "V-TVOUT";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-compatible = "ab8500_ldo_usb";
- regulator-name = "dummy";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-compatible = "ab8500_ldo_audio";
- regulator-name = "V-AUD";
};
// supply for v-anamic1 VAMic1-LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-compatible = "ab8500_ldo_anamic1";
- regulator-name = "V-AMIC1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
regulator-compatible = "ab8500_ldo_amamic2";
- regulator-name = "V-AMIC2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-compatible = "ab8500_ldo_dmic";
- regulator-name = "V-DMIC";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-compatible = "ab8500_ldo_ana";
- regulator-name = "V-CSI/DSI";
};
};
};
@@ -585,42 +554,42 @@
status = "disabled";
};
- sdi@80126000 {
+ sdi0_per1@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 0x4>;
status = "disabled";
};
- sdi@80118000 {
+ sdi1_per2@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
- sdi@80005000 {
+ sdi2_per3@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
- sdi@80119000 {
+ sdi3_per2@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
- sdi@80114000 {
+ sdi4_per2@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
- sdi@80008000 {
+ sdi5_per3@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
interrupts = <0 100 0x4>;
@@ -674,5 +643,18 @@
status = "disabled";
};
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2600000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 0adbd5a..fed7d3f 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -40,3 +40,13 @@
reg = <0>;
};
};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_gpio_18>;
+ pinctrl-names = "default";
+
+ pmx_gpio_18: pmx-gpio-18 {
+ marvell,pins = "mpp18";
+ marvell,function = "gpio";
+ };
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 5a00022..61f3914 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -4,6 +4,12 @@
compatible = "marvell,dove";
model = "Marvell Armada 88AP510 SoC";
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
soc@f1000000 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -72,7 +78,8 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0xd0400 0x20>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
interrupts = <12>, <13>, <14>, <60>;
};
@@ -81,7 +88,8 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0xd0420 0x20>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
interrupts = <61>;
};
@@ -90,7 +98,12 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0xe8400 0x0c>;
- ngpio = <8>;
+ ngpios = <8>;
+ };
+
+ pinctrl: pinctrl@d0200 {
+ compatible = "marvell,dove-pinctrl";
+ reg = <0xd0200 0x10>;
};
spi0: spi@10600 {
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index b7354e6..96e50f5 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -22,10 +22,22 @@
status = "okay";
};
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart2: serial@fffb8000 {
+ status = "okay";
+ };
+
usb1: gadget@fffa4000 {
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
};
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
};
usb0: ohci@00500000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 96d4462..e1347fc 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -28,6 +28,44 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ i2c2 = &i2c_2;
+ i2c3 = &i2c_3;
+ i2c4 = &i2c_4;
+ i2c5 = &i2c_5;
+ i2c6 = &i2c_6;
+ i2c7 = &i2c_7;
+ };
+
+ pd_mfc: mfc-power-domain@10023C40 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C40 0x20>;
+ };
+
+ pd_g3d: g3d-power-domain@10023C60 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C60 0x20>;
+ };
+
+ pd_lcd0: lcd0-power-domain@10023C80 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C80 0x20>;
+ };
+
+ pd_tv: tv-power-domain@10023C20 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C20 0x20>;
+ };
+
+ pd_cam: cam-power-domain@10023C00 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023C00 0x20>;
+ };
+
+ pd_gps: gps-power-domain@10023CE0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023CE0 0x20>;
};
gic:interrupt-controller@10490000 {
@@ -121,7 +159,7 @@
status = "disabled";
};
- i2c@13860000 {
+ i2c_0: i2c@13860000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -130,7 +168,7 @@
status = "disabled";
};
- i2c@13870000 {
+ i2c_1: i2c@13870000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -139,7 +177,7 @@
status = "disabled";
};
- i2c@13880000 {
+ i2c_2: i2c@13880000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -148,7 +186,7 @@
status = "disabled";
};
- i2c@13890000 {
+ i2c_3: i2c@13890000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -157,7 +195,7 @@
status = "disabled";
};
- i2c@138A0000 {
+ i2c_4: i2c@138A0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -166,7 +204,7 @@
status = "disabled";
};
- i2c@138B0000 {
+ i2c_5: i2c@138B0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -175,7 +213,7 @@
status = "disabled";
};
- i2c@138C0000 {
+ i2c_6: i2c@138C0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -184,7 +222,7 @@
status = "disabled";
};
- i2c@138D0000 {
+ i2c_7: i2c@138D0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 3e68f52..f271001 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -22,38 +22,54 @@
compatible = "insignal,origen", "samsung,exynos4210";
memory {
- reg = <0x40000000 0x40000000>;
+ reg = <0x40000000 0x10000000
+ 0x50000000 0x10000000
+ 0x60000000 0x10000000
+ 0x70000000 0x10000000>;
};
chosen {
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
+ mmc_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 0>;
+ enable-active-high;
+ };
+
sdhci@12530000 {
- samsung,sdhci-bus-width = <4>;
- linux,mmc_cap_4_bit_data;
- samsung,sdhci-cd-internal;
- gpio-cd = <&gpk2 2 2 3 3>;
- gpios = <&gpk2 0 2 0 3>,
- <&gpk2 1 2 0 3>,
- <&gpk2 3 2 3 3>,
- <&gpk2 4 2 3 3>,
- <&gpk2 5 2 3 3>,
- <&gpk2 6 2 3 3>;
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
status = "okay";
};
sdhci@12510000 {
- samsung,sdhci-bus-width = <4>;
- linux,mmc_cap_4_bit_data;
- samsung,sdhci-cd-internal;
- gpio-cd = <&gpk0 2 2 3 3>;
- gpios = <&gpk0 0 2 0 3>,
- <&gpk0 1 2 0 3>,
- <&gpk0 3 2 3 3>,
- <&gpk0 4 2 3 3>,
- <&gpk0 5 2 3 3>,
- <&gpk0 6 2 3 3>;
+ bus-width = <4>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
status = "okay";
};
@@ -64,35 +80,35 @@
up {
label = "Up";
- gpios = <&gpx2 0 0 0x10000 2>;
+ gpios = <&gpx2 0 1>;
linux,code = <103>;
gpio-key,wakeup;
};
down {
label = "Down";
- gpios = <&gpx2 1 0 0x10000 2>;
+ gpios = <&gpx2 1 1>;
linux,code = <108>;
gpio-key,wakeup;
};
back {
label = "Back";
- gpios = <&gpx1 7 0 0x10000 2>;
+ gpios = <&gpx1 7 1>;
linux,code = <158>;
gpio-key,wakeup;
};
home {
label = "Home";
- gpios = <&gpx1 6 0 0x10000 2>;
+ gpios = <&gpx1 6 1>;
linux,code = <102>;
gpio-key,wakeup;
};
menu {
label = "Menu";
- gpios = <&gpx1 5 0 0x10000 2>;
+ gpios = <&gpx1 5 1>;
linux,code = <139>;
gpio-key,wakeup;
};
@@ -101,7 +117,7 @@
leds {
compatible = "gpio-leds";
status {
- gpios = <&gpx1 3 0 0x10000 2>;
+ gpios = <&gpx1 3 1>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 6a4a1a0..55a2efb 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -482,196 +482,196 @@
samsung,pins = "gpk0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_clk: sd4-clk {
samsung,pins = "gpk0-0";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_cmd: sd4-cmd {
samsung,pins = "gpk0-1";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_cd: sd4-cd {
samsung,pins = "gpk0-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus1: sd4-bus-width1 {
samsung,pins = "gpk0-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus4: sd4-bus-width4 {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd4_bus8: sd4-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <3>;
samsung,pin-pud = <4>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpk1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpk1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpk1-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpk1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpk2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpk2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpk2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpk2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd2_bus8: sd2-bus-width8 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_clk: sd3-clk {
samsung,pins = "gpk3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_cmd: sd3-cmd {
samsung,pins = "gpk3-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_cd: sd3-cd {
samsung,pins = "gpk3-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_bus1: sd3-bus-width1 {
samsung,pins = "gpk3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-drv = <3>;
};
eint0: ext-int0 {
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 63610c3..9b23a82 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -43,6 +43,22 @@
status = "okay";
};
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
keypad@100A0000 {
samsung,keypad-num-rows = <2>;
samsung,keypad-num-columns = <8>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index a21511c..c346b64 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -35,24 +35,15 @@
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 1 0 0>;
+ gpio = <&gpk0 2 0>;
enable-active-high;
};
sdhci_emmc: sdhci@12510000 {
bus-width = <8>;
non-removable;
- broken-voltage;
- gpios = <&gpk0 0 2 0 3>,
- <&gpk0 1 2 0 3>,
- <&gpk0 3 2 2 3>,
- <&gpk0 4 2 2 3>,
- <&gpk0 5 2 2 3>,
- <&gpk0 6 2 2 3>,
- <&gpk1 3 3 3 3>,
- <&gpk1 4 3 3 3>,
- <&gpk1 5 3 3 3>,
- <&gpk1 6 3 3 3>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+ pinctrl-names = "default";
vmmc-supply = <&vemmc_reg>;
status = "okay";
};
@@ -73,12 +64,74 @@
status = "okay";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ vol-down-key {
+ gpios = <&gpx2 1 1>;
+ linux,code = <114>;
+ label = "volume down";
+ debounce-interval = <10>;
+ };
+
+ vol-up-key {
+ gpios = <&gpx2 0 1>;
+ linux,code = <115>;
+ label = "volume up";
+ debounce-interval = <10>;
+ };
+
+ power-key {
+ gpios = <&gpx2 7 1>;
+ linux,code = <116>;
+ label = "power";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+
+ ok-key {
+ gpios = <&gpx3 5 1>;
+ linux,code = <352>;
+ label = "ok";
+ debounce-interval = <10>;
+ };
+ };
+
+ tsp_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "TSP_FIXED_VOLTAGES";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpl0 3 0>;
+ enable-active-high;
+ };
+
+ i2c@13890000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mms114-touchscreen@48 {
+ compatible = "melfas,mms114";
+ reg = <0x48>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 2>;
+ x-size = <720>;
+ y-size = <1280>;
+ avdd-supply = <&tsp_reg>;
+ vdd-supply = <&tsp_reg>;
+ };
+ };
+
i2c@138B0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <100000>;
- gpios = <&gpb 6 3 3 0>,
- <&gpb 7 3 3 0>;
+ pinctrl-0 = <&i2c5_bus>;
+ pinctrl-names = "default";
status = "okay";
max8997_pmic@66 {
@@ -93,9 +146,9 @@
max8997,pmic-ignore-gpiodvs-side-effect;
max8997,pmic-buck125-default-dvs-idx = <0>;
- max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
- <&gpx0 6 1 0 0>,
- <&gpl0 0 1 0 0>;
+ max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
+ <&gpx0 6 0>,
+ <&gpl0 0 0>;
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
<1250000>, <1200000>,
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index d877dbe..e31bfc4 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,11 @@
pinctrl2 = &pinctrl_2;
};
+ pd_lcd1: lcd1-power-domain@10023CA0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023CA0 0x20>;
+ };
+
gic:interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
@@ -64,4 +69,11 @@
compatible = "samsung,pinctrl-exynos4210";
reg = <0x03860000 0x1000>;
};
+
+ tmu@100C0000 {
+ compatible = "samsung,exynos4210-tmu";
+ interrupt-parent = <&combiner>;
+ reg = <0x100C0000 0x100>;
+ interrupts = <2 4>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
new file mode 100644
index 0000000..c6ae200
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Samsung's Exynos4212 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4x12.dtsi"
+
+/ {
+ compatible = "samsung,exynos4212";
+
+ gic:interrupt-controller@10490000 {
+ cpu-offset = <0x8000>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
new file mode 100644
index 0000000..f05bf57
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -0,0 +1,45 @@
+/*
+ * Samsung's Exynos4412 based SMDK board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Samsung's SMDK4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Samsung SMDK evaluation board based on Exynos4412";
+ compatible = "samsung,smdk4412", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
new file mode 100644
index 0000000..d7dfe31
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4x12.dtsi"
+
+/ {
+ compatible = "samsung,exynos4412";
+
+ gic:interrupt-controller@10490000 {
+ cpu-offset = <0x4000>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
new file mode 100644
index 0000000..8e6115a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -0,0 +1,965 @@
+/*
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ pinctrl@11400000 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb: gpb {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf3: gpf3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpj0: gpj0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpj1: gpj1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa0-4", "gpa0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart_audio_a: uart-audio-a {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart_audio_b: uart-audio-b {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpb-0", "gpb-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ac97_bus: ac97-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif_bus: spdif-bus {
+ samsung,pins = "gpc1-0", "gpc1-1";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpc1-3", "gpc1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpd0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpd0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_ctrl: lcd-ctrl {
+ samsung,pins = "gpd0-0", "gpd0-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpd0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpd0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpd1-0", "gpd1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ mipi0_clk: mipi0-clk {
+ samsung,pins = "gpd1-0", "gpd1-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpd1-2", "gpd1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ mipi1_clk: mipi1-clk {
+ samsung,pins = "gpd1-2", "gpd1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_clk: lcd-clk {
+ samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_data16: lcd-data-width16 {
+ samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+ "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+ "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+ "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_data18: lcd-data-width18 {
+ samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+ "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+ "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+ "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+ "gpf3-2", "gpf3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_data24: lcd-data-width24 {
+ samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+ "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+ "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+ "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+ "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lcd_ldi: lcd-ldi {
+ samsung,pins = "gpf3-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_a: cam-port-a {
+ samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+ "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+ "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
+ "gpj1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@11000000 {
+ gpk0: gpk0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk1: gpk1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk2: gpk2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk3: gpk3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpl0: gpl0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpl1: gpl1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpl2: gpl2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm0: gpm0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm1: gpm1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm2: gpm2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm3: gpm3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm4: gpm4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpy0: gpy0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy1: gpy1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy2: gpy2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy3: gpy3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy4: gpy4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy5: gpy5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpy6: gpy6 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+ <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpk0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpk0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpk0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd4_clk: sd4-clk {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd4_cmd: sd4-cmd {
+ samsung,pins = "gpk0-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd4_cd: sd4-cd {
+ samsung,pins = "gpk0-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd4_bus1: sd4-bus-width1 {
+ samsung,pins = "gpk0-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd4_bus4: sd4-bus-width4 {
+ samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd4_bus8: sd4-bus-width8 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <4>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpk1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpk1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpk1-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpk1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpk2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpk2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpk2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpk2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus8: sd2-bus-width8 {
+ samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_clk: sd3-clk {
+ samsung,pins = "gpk3-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_cmd: sd3-cmd {
+ samsung,pins = "gpk3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_cd: sd3-cd {
+ samsung,pins = "gpk3-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_bus1: sd3-bus-width1 {
+ samsung,pins = "gpk3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd3_bus4: sd3-bus-width4 {
+ samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ keypad_col0: keypad-col0 {
+ samsung,pins = "gpl2-0";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_col1: keypad-col1 {
+ samsung,pins = "gpl2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_col2: keypad-col2 {
+ samsung,pins = "gpl2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_col3: keypad-col3 {
+ samsung,pins = "gpl2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_col4: keypad-col4 {
+ samsung,pins = "gpl2-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_col5: keypad-col5 {
+ samsung,pins = "gpl2-5";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_col6: keypad-col6 {
+ samsung,pins = "gpl2-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ keypad_col7: keypad-col7 {
+ samsung,pins = "gpl2-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_b: cam-port-b {
+ samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+ "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+ "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
+ "gpm2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint0: ext-int0 {
+ samsung,pins = "gpx0-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint8: ext-int8 {
+ samsung,pins = "gpx1-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint15: ext-int15 {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint16: ext-int16 {
+ samsung,pins = "gpx2-0";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ eint31: ext-int31 {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@03860000 {
+ gpz: gpz {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4", "gpz-5", "gpz-6";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm0_bus: pcm0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4";
+ samsung,pin-function = <0x3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl@106E0000 {
+ gpv0: gpv0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv1: gpv1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv2: gpv2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv3: gpv3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpv4: gpv4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ c2c_bus: c2c-bus {
+ samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+ "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+ "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+ "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
+ "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+ "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+ "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+ "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
+ "gpv4-0", "gpv4-1";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
new file mode 100644
index 0000000..179a62e
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -0,0 +1,69 @@
+/*
+ * Samsung's Exynos4x12 SoCs device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4.dtsi"
+/include/ "exynos4x12-pinctrl.dtsi"
+
+/ {
+ aliases {
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ pinctrl2 = &pinctrl_2;
+ pinctrl3 = &pinctrl_3;
+ };
+
+ combiner:interrupt-controller@10440000 {
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+ <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
+ };
+
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,pinctrl-exynos4x12";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 47 0>;
+ };
+
+ pinctrl_1: pinctrl@11000000 {
+ compatible = "samsung,pinctrl-exynos4x12";
+ reg = <0x11000000 0x1000>;
+ interrupts = <0 46 0>;
+
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>;
+ };
+ };
+
+ pinctrl_2: pinctrl@03860000 {
+ compatible = "samsung,pinctrl-exynos4x12";
+ reg = <0x03860000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <10 0>;
+ };
+
+ pinctrl_3: pinctrl@106E0000 {
+ compatible = "samsung,pinctrl-exynos4x12";
+ reg = <0x106E0000 0x1000>;
+ interrupts = <0 72 0>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a352df4..942d576 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -17,10 +17,6 @@
compatible = "samsung,smdk5250", "samsung,exynos5250";
aliases {
- mshc0 = &dwmmc_0;
- mshc1 = &dwmmc_1;
- mshc2 = &dwmmc_2;
- mshc3 = &dwmmc_3;
};
memory {
@@ -55,8 +51,31 @@
};
};
+ i2c@121D0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata-phy {
+ compatible = "samsung,sata-phy";
+ reg = <0x38>;
+ };
+ };
+
+ sata@122F0000 {
+ samsung,sata-freq = <66>;
+ };
+
i2c@12C80000 {
- status = "disabled";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ gpios = <&gpa0 6 3 3 0>,
+ <&gpa0 7 3 3 0>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos5-hdmiddc";
+ reg = <0x50>;
+ };
};
i2c@12C90000 {
@@ -79,7 +98,17 @@
status = "disabled";
};
- dwmmc_0: dwmmc0@12200000 {
+ i2c@12CE0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos5-hdmiphy";
+ reg = <0x38>;
+ };
+ };
+
+ dwmmc0@12200000 {
num-slots = <1>;
supports-highspeed;
broken-cd;
@@ -100,11 +129,11 @@
};
};
- dwmmc_1: dwmmc1@12210000 {
+ dwmmc1@12210000 {
status = "disabled";
};
- dwmmc_2: dwmmc2@12220000 {
+ dwmmc2@12220000 {
num-slots = <1>;
supports-highspeed;
fifo-depth = <0x80>;
@@ -125,7 +154,7 @@
};
};
- dwmmc_3: dwmmc3@12230000 {
+ dwmmc3@12230000 {
status = "disabled";
};
@@ -166,4 +195,13 @@
spi_2: spi@12d40000 {
status = "disabled";
};
+
+ hdmi {
+ hpd-gpio = <&gpx3 7 0xf 1 3>;
+ };
+
+ codec@11000000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
new file mode 100644
index 0000000..17dd951
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -0,0 +1,43 @@
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+/include/ "cros5250-common.dtsi"
+
+/ {
+ model = "Google Snow";
+ compatible = "google,snow", "samsung,exynos5250";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 0 0x10000 0>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ /*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+ dwmmc3@12230000 {
+ slot@0 {
+ gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
+ <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
+ <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index dddfd6e..36d8246 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -31,6 +31,10 @@
gsc1 = &gsc_1;
gsc2 = &gsc_2;
gsc3 = &gsc_3;
+ mshc0 = &dwmmc_0;
+ mshc1 = &dwmmc_1;
+ mshc2 = &dwmmc_2;
+ mshc3 = &dwmmc_3;
};
gic:interrupt-controller@10481000 {
@@ -62,12 +66,24 @@
interrupts = <0 42 0>;
};
+ codec@11000000 {
+ compatible = "samsung,mfc-v6";
+ reg = <0x11000000 0x10000>;
+ interrupts = <0 96 0>;
+ };
+
rtc {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
interrupts = <0 43 0>, <0 44 0>;
};
+ tmu@10060000 {
+ compatible = "samsung,exynos5250-tmu";
+ reg = <0x10060000 0x100>;
+ interrupts = <0 65 0>;
+ };
+
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
@@ -92,6 +108,17 @@
interrupts = <0 54 0>;
};
+ sata@122F0000 {
+ compatible = "samsung,exynos5-sata-ahci";
+ reg = <0x122F0000 0x1ff>;
+ interrupts = <0 115 0>;
+ };
+
+ sata-phy@12170000 {
+ compatible = "samsung,exynos5-sata-phy";
+ reg = <0x12170000 0x1ff>;
+ };
+
i2c@12C60000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
@@ -156,6 +183,21 @@
#size-cells = <0>;
};
+ i2c@12CE0000 {
+ compatible = "samsung,s3c2440-hdmiphy-i2c";
+ reg = <0x12CE0000 0x1000>;
+ interrupts = <0 64 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@121D0000 {
+ compatible = "samsung,exynos5-sata-phy-i2c";
+ reg = <0x121D0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
@@ -186,7 +228,7 @@
#size-cells = <0>;
};
- dwmmc0@12200000 {
+ dwmmc_0: dwmmc0@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12200000 0x1000>;
interrupts = <0 75 0>;
@@ -194,7 +236,7 @@
#size-cells = <0>;
};
- dwmmc1@12210000 {
+ dwmmc_1: dwmmc1@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12210000 0x1000>;
interrupts = <0 76 0>;
@@ -202,7 +244,7 @@
#size-cells = <0>;
};
- dwmmc2@12220000 {
+ dwmmc_2: dwmmc2@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12220000 0x1000>;
interrupts = <0 77 0>;
@@ -210,7 +252,7 @@
#size-cells = <0>;
};
- dwmmc3@12230000 {
+ dwmmc_3: dwmmc3@12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
interrupts = <0 78 0>;
@@ -520,4 +562,16 @@
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
};
+
+ hdmi {
+ compatible = "samsung,exynos5-hdmi";
+ reg = <0x14530000 0x100000>;
+ interrupts = <0 95 0>;
+ };
+
+ mixer {
+ compatible = "samsung,exynos5-mixer";
+ reg = <0x14450000 0x10000>;
+ interrupts = <0 94 0>;
+ };
};
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
new file mode 100644
index 0000000..592fb9d
--- /dev/null
+++ b/arch/arm/boot/dts/href.dtsi
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "dbx5x0.dtsi"
+
+/ {
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ linux,code = <11>;
+ label = "SFH7741 Proximity Sensor";
+ };
+ };
+
+ soc-u9500 {
+ uart@80120000 {
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ status = "okay";
+ };
+
+ i2c@80004000 {
+ tc3589x@42 {
+ compatible = "tc3589x";
+ reg = <0x42>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <25 0x1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ tc3589x_gpio: tc3589x_gpio {
+ compatible = "tc3589x-gpio";
+ interrupts = <0 0x1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+
+ i2c@80128000 {
+ lp5521@0x33 {
+ compatible = "lp5521";
+ reg = <0x33>;
+ };
+
+ lp5521@0x34 {
+ compatible = "lp5521";
+ reg = <0x34>;
+ };
+
+ bh1780@0x29 {
+ compatible = "rohm,bh1780gli";
+ reg = <0x33>;
+ };
+ };
+
+ // External Micro SD slot
+ sdi0_per1@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ mmc-cap-sd-highspeed;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+ cd-gpios = <&tc3589x_gpio 3 0x4>;
+
+ status = "okay";
+ };
+
+ // WLAN SDIO channel
+ sdi1_per2@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+
+ status = "okay";
+ };
+
+ // PoP:ed eMMC
+ sdi2_per3@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+
+ status = "okay";
+ };
+
+ // On-board eMMC
+ sdi4_per2@80114000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+ status = "okay";
+ };
+
+ sound {
+ compatible = "stericsson,snd-soc-mop500";
+
+ stericsson,cpu-dai = <&msp1 &msp3>;
+ stericsson,audio-codec = <&codec>;
+ };
+
+ msp1: msp@80124000 {
+ status = "okay";
+ };
+
+ msp3: msp@80125000 {
+ status = "okay";
+ };
+
+ prcmu@80157000 {
+ db8500-prcmu-regulators {
+ db8500_vape_reg: db8500_vape {
+ regulator-name = "db8500-vape";
+ };
+
+ db8500_varm_reg: db8500_varm {
+ regulator-name = "db8500-varm";
+ };
+
+ db8500_vmodem_reg: db8500_vmodem {
+ regulator-name = "db8500-vmodem";
+ };
+
+ db8500_vpll_reg: db8500_vpll {
+ regulator-name = "db8500-vpll";
+ };
+
+ db8500_vsmps1_reg: db8500_vsmps1 {
+ regulator-name = "db8500-vsmps1";
+ };
+
+ db8500_vsmps2_reg: db8500_vsmps2 {
+ regulator-name = "db8500-vsmps2";
+ };
+
+ db8500_vsmps3_reg: db8500_vsmps3 {
+ regulator-name = "db8500-vsmps3";
+ };
+
+ db8500_vrf1_reg: db8500_vrf1 {
+ regulator-name = "db8500-vrf1";
+ };
+
+ db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ regulator-name = "db8500-sva-mmdsp";
+ };
+
+ db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ regulator-name = "db8500-sva-mmdsp-ret";
+ };
+
+ db8500_sva_pipe_reg: db8500_sva_pipe {
+ regulator-name = "db8500_sva_pipe";
+ };
+
+ db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ regulator-name = "db8500_sia_mmdsp";
+ };
+
+ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+ regulator-name = "db8500-sia-mmdsp-ret";
+ };
+
+ db8500_sia_pipe_reg: db8500_sia_pipe {
+ regulator-name = "db8500-sia-pipe";
+ };
+
+ db8500_sga_reg: db8500_sga {
+ regulator-name = "db8500-sga";
+ };
+
+ db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ regulator-name = "db8500-b2r2-mcde";
+ };
+
+ db8500_esram12_reg: db8500_esram12 {
+ regulator-name = "db8500-esram12";
+ };
+
+ db8500_esram12_ret_reg: db8500_esram12_ret {
+ regulator-name = "db8500-esram12-ret";
+ };
+
+ db8500_esram34_reg: db8500_esram34 {
+ regulator-name = "db8500-esram34";
+ };
+
+ db8500_esram34_ret_reg: db8500_esram34_ret {
+ regulator-name = "db8500-esram34-ret";
+ };
+ };
+
+ ab8500@5 {
+ ab8500-regulators {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_usb_reg: ab8500_ldo_usb {
+ regulator-name = "dummy";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
new file mode 100644
index 0000000..eec29c4
--- /dev/null
+++ b/arch/arm/boot/dts/hrefprev60.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+/include/ "stuib.dtsi"
+
+/ {
+ model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
+ compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+ gpio_keys {
+ button@1 {
+ gpios = <&tc3589x_gpio 7 0x4>;
+ };
+ };
+
+ soc-u9500 {
+ i2c@80004000 {
+ tps61052@33 {
+ compatible = "tps61052";
+ reg = <0x33>;
+ };
+ };
+
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ reset-gpio = <&tc3589x_gpio 13 0x4>;
+ };
+ };
+
+ vmmci: regulator-gpio {
+ gpios = <&tc3589x_gpio 18 0x4>;
+ gpio-enable = <&tc3589x_gpio 17 0x4>;
+
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 2131d77..55f4191 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -11,85 +11,200 @@
/dts-v1/;
/include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+/include/ "stuib.dtsi"
/ {
- model = "ST-Ericsson HREF platform with Device Tree";
- compatible = "st-ericsson,hrefv60+";
+ model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+ compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
- memory {
- reg = <0x00000000 0x20000000>;
+ gpio_keys {
+ button@1 {
+ gpios = <&gpio6 25 0x4>;
+ };
};
soc-u9500 {
- uart@80120000 {
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ reset-gpio = <&gpio4 15 0x4>;
+ };
+ };
+
+ // External Micro SD slot
+ sdi0_per1@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ mmc-cap-sd-highspeed;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+ cd-gpios = <&tc3589x_gpio 3 0x4>;
+
status = "okay";
};
- uart@80121000 {
+ // WLAN SDIO channel
+ sdi1_per2@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+
status = "okay";
};
- uart@80007000 {
+ // PoP:ed eMMC
+ sdi2_per3@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+
status = "okay";
};
- i2c@80004000 {
- tc3589x@42 {
- compatible = "tc3589x";
- reg = <0x42>;
- interrupt-parent = <&gpio6>;
- interrupts = <25 0x1>;
+ // On-board eMMC
+ sdi4_per2@80114000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux2_reg>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ status = "okay";
+ };
- tc3589x_gpio: tc3589x_gpio {
- compatible = "tc3589x-gpio";
- interrupts = <0 0x1>;
+ prcmu@80157000 {
+ db8500-prcmu-regulators {
+ db8500_vape_reg: db8500_vape {
+ regulator-name = "db8500-vape";
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
+ db8500_varm_reg: db8500_varm {
+ regulator-name = "db8500-varm";
+ };
+
+ db8500_vmodem_reg: db8500_vmodem {
+ regulator-name = "db8500-vmodem";
+ };
+
+ db8500_vpll_reg: db8500_vpll {
+ regulator-name = "db8500-vpll";
+ };
+
+ db8500_vsmps1_reg: db8500_vsmps1 {
+ regulator-name = "db8500-vsmps1";
+ };
+
+ db8500_vsmps2_reg: db8500_vsmps2 {
+ regulator-name = "db8500-vsmps2";
+ };
+
+ db8500_vsmps3_reg: db8500_vsmps3 {
+ regulator-name = "db8500-vsmps3";
+ };
+
+ db8500_vrf1_reg: db8500_vrf1 {
+ regulator-name = "db8500-vrf1";
+ };
+
+ db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ regulator-name = "db8500-sva-mmdsp";
+ };
+
+ db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ regulator-name = "db8500-sva-mmdsp-ret";
+ };
+
+ db8500_sva_pipe_reg: db8500_sva_pipe {
+ regulator-name = "db8500_sva_pipe";
+ };
+
+ db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ regulator-name = "db8500_sia_mmdsp";
+ };
+
+ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+ regulator-name = "db8500-sia-mmdsp-ret";
+ };
+
+ db8500_sia_pipe_reg: db8500_sia_pipe {
+ regulator-name = "db8500-sia-pipe";
+ };
+
+ db8500_sga_reg: db8500_sga {
+ regulator-name = "db8500-sga";
+ };
+
+ db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ regulator-name = "db8500-b2r2-mcde";
+ };
+
+ db8500_esram12_reg: db8500_esram12 {
+ regulator-name = "db8500-esram12";
+ };
+
+ db8500_esram12_ret_reg: db8500_esram12_ret {
+ regulator-name = "db8500-esram12-ret";
+ };
+
+ db8500_esram34_reg: db8500_esram34 {
+ regulator-name = "db8500-esram34";
+ };
+
+ db8500_esram34_ret_reg: db8500_esram34_ret {
+ regulator-name = "db8500-esram34-ret";
};
};
- tps61052@33 {
- compatible = "tps61052";
- reg = <0x33>;
+ ab8500@5 {
+ ab8500-regulators {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_usb_reg: ab8500_ldo_usb {
+ regulator-name = "dummy";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
};
};
-
- i2c@80128000 {
- lp5521@0x33 {
- compatible = "lp5521";
- reg = <0x33>;
- };
-
- lp5521@0x34 {
- compatible = "lp5521";
- reg = <0x34>;
- };
-
- bh1780@0x29 {
- compatible = "rohm,bh1780gli";
- reg = <0x33>;
- };
- };
-
- sound {
- compatible = "stericsson,snd-soc-mop500";
-
- stericsson,cpu-dai = <&msp1 &msp3>;
- stericsson,audio-codec = <&codec>;
- };
-
- msp1: msp@80124000 {
- status = "okay";
- };
-
- msp3: msp@80125000 {
- status = "okay";
- };
};
};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 384d8b6..7c43b8e 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -40,6 +40,15 @@
reg = <0>;
fsl,pinmux-ids = <
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ led_pin_gpio0_17: led_gpio0_17@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
>;
fsl,drive-strength = <0>;
@@ -47,6 +56,15 @@
fsl,pull-up = <0>;
};
};
+
+ ssp1: ssp@80034000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx23-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+ };
};
apbx@80040000 {
@@ -91,11 +109,12 @@
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio0_17>;
user {
label = "green";
- gpios = <&gpio2 1 0>;
- linux,default-trigger = "default-on";
+ gpios = <&gpio2 1 1>;
};
};
};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 6d31aa3..65415c5 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -279,6 +279,19 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ spi2_pins_a: spi2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
+ 0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
+ 0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
+ 0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
};
digctl@8001c000 {
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
new file mode 100644
index 0000000..d81f8a0
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx25.dtsi"
+
+/ {
+ model = "Ka-Ro TX25";
+ compatible = "karo,imx25-tx25", "fsl,imx25";
+
+ memory {
+ reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+ };
+
+ soc {
+ aips@43f00000 {
+ uart1: serial@43f90000 {
+ status = "okay";
+ };
+ };
+
+ spba@50000000 {
+ fec: ethernet@50038000 {
+ status = "okay";
+ phy-mode = "rmii";
+ };
+ };
+
+ emi@80000000 {
+ nand@bb000000 {
+ nand-on-flash-bbt;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
new file mode 100644
index 0000000..e1b13eb
--- /dev/null
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -0,0 +1,515 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ usb0 = &usbotg;
+ usb1 = &usbhost1;
+ };
+
+ asic: asic-interrupt-controller@68000000 {
+ compatible = "fsl,imx25-asic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x68000000 0x8000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&asic>;
+ ranges;
+
+ aips@43f00000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ i2c1: i2c@43f80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f80000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@43f84000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f84000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ can1: can@43f88000 {
+ compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+ reg = <0x43f88000 0x4000>;
+ interrupts = <43>;
+ clocks = <&clks 75>, <&clks 75>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can2: can@43f8c000 {
+ compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+ reg = <0x43f8c000 0x4000>;
+ interrupts = <44>;
+ clocks = <&clks 76>, <&clks 76>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 120>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks 121>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c2: i2c@43f98000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f98000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <4>;
+ status = "disabled";
+ };
+
+ owire@43f9c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x43f9c000 0x4000>;
+ clocks = <&clks 51>;
+ clock-names = "";
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ spi1: cspi@43fa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x43fa4000 0x4000>;
+ clocks = <&clks 62>;
+ clock-names = "ipg";
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ kpp@43fa8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x43fa8000 0x4000>;
+ clocks = <&clks 102>;
+ clock-names = "";
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ iomuxc@43fac000{
+ compatible = "fsl,imx25-iomuxc";
+ reg = <0x43fac000 0x4000>;
+ };
+
+ audmux@43fb0000 {
+ compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
+ reg = <0x43fb0000 0x4000>;
+ status = "disabled";
+ };
+ };
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ spi3: cspi@50004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x50004000 0x4000>;
+ interrupts = <0>;
+ clocks = <&clks 80>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart4: serial@50008000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x50008000 0x4000>;
+ interrupts = <5>;
+ clocks = <&clks 123>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <18>;
+ clocks = <&clks 122>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ spi2: cspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x50010000 0x4000>;
+ clocks = <&clks 79>;
+ clock-names = "ipg";
+ interrupts = <13>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@50014000 {
+ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <11>;
+ status = "disabled";
+ };
+
+ esai@50018000 {
+ reg = <0x50018000 0x4000>;
+ interrupts = <7>;
+ };
+
+ uart5: serial@5002c000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x5002c000 0x4000>;
+ interrupts = <40>;
+ clocks = <&clks 124>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ tsc: tsc@50030000 {
+ compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
+ reg = <0x50030000 0x4000>;
+ interrupts = <46>;
+ clocks = <&clks 119>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ ssi1: ssi@50034000 {
+ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+ reg = <0x50034000 0x4000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+
+ fec: ethernet@50038000 {
+ compatible = "fsl,imx25-fec";
+ reg = <0x50038000 0x4000>;
+ interrupts = <57>;
+ clocks = <&clks 88>, <&clks 65>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
+ };
+
+ aips@53f00000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x53f00000 0x100000>;
+ ranges;
+
+ clks: ccm@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ gpt4: timer@53f84000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f84000 0x4000>;
+ clocks = <&clks 9>, <&clks 45>;
+ clock-names = "ipg", "per";
+ interrupts = <1>;
+ };
+
+ gpt3: timer@53f88000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f88000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <29>;
+ };
+
+ gpt2: timer@53f8c000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f8c000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <53>;
+ };
+
+ gpt1: timer@53f90000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f90000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <54>;
+ };
+
+ epit1: timer@53f94000 {
+ compatible = "fsl,imx25-epit";
+ reg = <0x53f94000 0x4000>;
+ interrupts = <28>;
+ };
+
+ epit2: timer@53f98000 {
+ compatible = "fsl,imx25-epit";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <27>;
+ };
+
+ gpio4: gpio@53f9c000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwm2: pwm@53fa0000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fa0000 0x4000>;
+ clocks = <&clks 106>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <36>;
+ };
+
+ gpio3: gpio@53fa4000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <16>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwm3: pwm@53fa8000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fa8000 0x4000>;
+ clocks = <&clks 107>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <41>;
+ };
+
+ esdhc1: esdhc@53fb4000 {
+ compatible = "fsl,imx25-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <9>;
+ clocks = <&clks 86>, <&clks 63>, <&clks 45>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@53fb8000 {
+ compatible = "fsl,imx25-esdhc";
+ reg = <0x53fb8000 0x4000>;
+ interrupts = <8>;
+ clocks = <&clks 87>, <&clks 64>, <&clks 46>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ lcdc@53fbc000 {
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ slcdc@53fc0000 {
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@53fc8000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ reg = <0x53fc8000 0x4000>;
+ clocks = <&clks 108>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <42>;
+ };
+
+ gpio1: gpio@53fcc000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <52>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53fd0000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fd0000 0x4000>;
+ interrupts = <51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sdma@53fd4000 {
+ compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
+ reg = <0x53fd4000 0x4000>;
+ clocks = <&clks 112>, <&clks 68>;
+ clock-names = "ipg", "ahb";
+ interrupts = <34>;
+ };
+
+ wdog@53fdc000 {
+ compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
+ reg = <0x53fdc000 0x4000>;
+ clocks = <&clks 126>;
+ clock-names = "";
+ interrupts = <55>;
+ };
+
+ pwm1: pwm@53fe0000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fe0000 0x4000>;
+ clocks = <&clks 105>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <26>;
+ };
+
+ usbphy1: usbphy@1 {
+ compatible = "nop-usbphy";
+ status = "disabled";
+ };
+
+ usbphy2: usbphy@2 {
+ compatible = "nop-usbphy";
+ status = "disabled";
+ };
+
+ usbotg: usb@53ff4000 {
+ compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+ reg = <0x53ff4000 0x0200>;
+ interrupts = <37>;
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 0>;
+ status = "disabled";
+ };
+
+ usbhost1: usb@53ff4400 {
+ compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+ reg = <0x53ff4400 0x0200>;
+ interrupts = <35>;
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@53ff4600 {
+ #index-cells = <1>;
+ compatible = "fsl,imx25-usbmisc";
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ reg = <0x53ff4600 0x00f>;
+ status = "disabled";
+ };
+
+ dryice@53ffc000 {
+ compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+ reg = <0x53ffc000 0x4000>;
+ clocks = <&clks 81>;
+ clock-names = "ipg";
+ interrupts = <25>;
+ };
+ };
+
+ emi@80000000 {
+ compatible = "fsl,emi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x3b002000>;
+ ranges;
+
+ nand@bb000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "fsl,imx25-nand";
+ reg = <0xbb000000 0x2000>;
+ clocks = <&clks 50>;
+ clock-names = "";
+ interrupts = <33>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
new file mode 100644
index 0000000..c0327c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+ model = "Armadeus Systems APF27 module";
+ compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+ memory {
+ reg = <0xa0000000 0x04000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc26m {
+ compatible = "fsl,imx-osc26m", "fixed-clock";
+ clock-frequency = <0>;
+ };
+ };
+
+ soc {
+ aipi@10000000 {
+ serial@1000a000 {
+ status = "okay";
+ };
+
+ ethernet@1002b000 {
+ status = "okay";
+ };
+ };
+
+ nand@d8000000 {
+ status = "okay";
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "env";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition@180000 {
+ label = "env2";
+ reg = <0x180000 0x80000>;
+ };
+
+ partition@200000 {
+ label = "firmware";
+ reg = <0x200000 0x80000>;
+ };
+
+ partition@280000 {
+ label = "dtb";
+ reg = <0x280000 0x80000>;
+ };
+
+ partition@300000 {
+ label = "kernel";
+ reg = <0x300000 0x500000>;
+ };
+
+ partition@800000 {
+ label = "rootfs";
+ reg = <0x800000 0xf800000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 67d6727..b8d3905 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -58,7 +58,7 @@
reg = <0x10000000 0x10000000>;
ranges;
- wdog@10002000 {
+ wdog: wdog@10002000 {
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
reg = <0x10002000 0x4000>;
interrupts = <27>;
@@ -218,7 +218,8 @@
status = "disabled";
};
};
- nand@d8000000 {
+
+ nfc: nand@d8000000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
new file mode 100644
index 0000000..7eb0758
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "Armadeus Systems APF28 module";
+ compatible = "armadeus,imx28-apf28", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ gpmi-nand@8000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x300000>;
+ };
+
+ partition@300000 {
+ label = "env";
+ reg = <0x300000 0x80000>;
+ };
+
+ partition@380000 {
+ label = "env2";
+ reg = <0x380000 0x80000>;
+ };
+
+ partition@400000 {
+ label = "dtb";
+ reg = <0x400000 0x80000>;
+ };
+
+ partition@480000 {
+ label = "splash";
+ reg = <0x480000 0x80000>;
+ };
+
+ partition@500000 {
+ label = "kernel";
+ reg = <0x500000 0x800000>;
+ };
+
+ partition@d00000 {
+ label = "rootfs";
+ reg = <0xd00000 0xf300000>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio4 13 0>;
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
new file mode 100644
index 0000000..6d8865b
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* APF28Dev is a docking board for the APF28 SOM */
+/include/ "imx28-apf28.dts"
+
+/ {
+ model = "Armadeus Systems APF28Dev docking/development board";
+ compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ ssp2: ssp@80014000 {
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_apf28dev>;
+
+ hog_pins_apf28dev: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
+ 0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
+ 0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
+ 0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
+ 0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
+ 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_16bit_pins_a
+ &lcdif_pins_apf28dev>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+ };
+
+ usb1: usb@80090000 {
+ status = "okay";
+ };
+
+ mac1: ethernet@800f4000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac1_pins_a>;
+ phy-reset-gpios = <&gpio0 23 0>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb0_vbus: usb0_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 23 1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio0 21 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+
+ pwms = <&pwm 3 191000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index c03a577..1594694 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -22,6 +22,31 @@
apb@80000000 {
apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_cfa10036>;
+
+ hog_pins_cfa10036: hog-10036@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ led_pins_cfa10036: leds-10036@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
@@ -33,16 +58,37 @@
};
apbx@80040000 {
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pins_a>;
+ status = "okay";
+ };
+
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_b>;
status = "okay";
};
+
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_b>;
+ status = "okay";
+
+ ssd1307: oled@3c {
+ compatible = "solomon,ssd1307fb-i2c";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7 0>;
+ };
+ };
};
};
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_cfa10036>;
power {
gpios = <&gpio3 4 1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 05c892e..b222614 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -22,6 +22,22 @@
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10049>;
+
+ hog_pins_cfa10049: hog-10049@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
+ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
spi3_pins_cfa10049: spi3-cfa10049@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -29,6 +45,7 @@
0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+ 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
@@ -60,6 +77,11 @@
spi-max-frequency = <100000>;
};
+ dac0: dh2228@2 {
+ compatible = "rohm,dh2228fv";
+ reg = <2>;
+ spi-max-frequency = <100000>;
+ };
};
};
@@ -96,4 +118,15 @@
gpio = <&gpio0 7 1>;
};
};
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index a0ad71c..2da316e 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -76,7 +76,6 @@
0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
- 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
>;
@@ -85,6 +84,16 @@
fsl,pull-up = <0>;
};
+ led_pin_gpio3_5: led_gpio3_5@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
gpmi_pins_evk: gpmi-nand-evk@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -288,6 +297,8 @@
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio3_5>;
user {
label = "Heartbeat";
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
new file mode 100644
index 0000000..e6cde8a
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "SchulerControl GmbH, SC SPS 1";
+ compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
+ 0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
+ 0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ };
+
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a>;
+ bus-width = <4>;
+ status = "okay";
+ };
+
+ ssp2: ssp@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "everspin,mr25h256", "mr25h256";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ i2c0: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rtc: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ eeprom: eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ pagesize = <32>;
+ };
+ };
+
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ vbus-supply = <®_usb0_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbphy0_pins_b>;
+ status = "okay";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ status = "okay";
+ };
+
+ mac1: ethernet@800f4000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac1_pins_a>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb0_vbus: usb0_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 9 0>;
+ };
+ };
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "gpio-leds";
+ status = "okay";
+
+ led@1 {
+ label = "sps1-1:yellow:user";
+ gpios = <&gpio0 6 0>;
+ linux,default-trigger = "heartbeat";
+ reg = <0>;
+ };
+
+ led@2 {
+ label = "sps1-2:red:user";
+ gpios = <&gpio0 3 0>;
+ linux,default-trigger = "heartbeat";
+ reg = <1>;
+ };
+
+ led@3 {
+ label = "sps1-3:red:user";
+ gpios = <&gpio0 0 0>;
+ default-trigger = "heartbeat";
+ reg = <2>;
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index b4587b27..13b7053 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -492,6 +492,16 @@
fsl,pull-up = <0>;
};
+ pwm3_pins_a: pwm3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
pwm4_pins_a: pwm4@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -535,6 +545,31 @@
fsl,pull-up = <0>;
};
+ lcdif_16bit_pins_a: lcdif-16bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
can0_pins_a: can0@0 {
reg = <0>;
fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 2781e47..1f5d45e 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -83,7 +83,7 @@
reg = <0x70000000 0x40000>;
ranges;
- esdhc@70004000 { /* ESDHC1 */
+ esdhc1: esdhc@70004000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
@@ -92,12 +92,13 @@
status = "disabled";
};
- esdhc@70008000 { /* ESDHC2 */
+ esdhc2: esdhc@70008000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
@@ -110,7 +111,7 @@
status = "disabled";
};
- ecspi@70010000 { /* ECSPI1 */
+ ecspi1: ecspi@70010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
@@ -131,47 +132,49 @@
status = "disabled";
};
- esdhc@70020000 { /* ESDHC3 */
+ esdhc3: esdhc@70020000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
interrupts = <3>;
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- esdhc@70024000 { /* ESDHC4 */
+ esdhc4: esdhc@70024000 {
compatible = "fsl,imx51-esdhc";
reg = <0x70024000 0x4000>;
interrupts = <4>;
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
};
- usb@73f80000 {
+ usbotg: usb@73f80000 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80000 0x0200>;
interrupts = <18>;
status = "disabled";
};
- usb@73f80200 {
+ usbh1: usb@73f80200 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80200 0x0200>;
interrupts = <14>;
status = "disabled";
};
- usb@73f80400 {
+ usbh2: usb@73f80400 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80400 0x0200>;
interrupts = <16>;
status = "disabled";
};
- usb@73f80600 {
+ usbh3: usb@73f80600 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80600 0x0200>;
interrupts = <17>;
@@ -218,14 +221,14 @@
#interrupt-cells = <2>;
};
- wdog@73f98000 { /* WDOG1 */
+ wdog1: wdog@73f98000 {
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
clocks = <&clks 0>;
};
- wdog@73f9c000 { /* WDOG2 */
+ wdog2: wdog@73f9c000 {
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f9c000 0x4000>;
interrupts = <59>;
@@ -233,7 +236,7 @@
status = "disabled";
};
- iomuxc@73fa8000 {
+ iomuxc: iomuxc@73fa8000 {
compatible = "fsl,imx51-iomuxc";
reg = <0x73fa8000 0x4000>;
@@ -460,7 +463,7 @@
reg = <0x80000000 0x10000000>;
ranges;
- ecspi@83fac000 { /* ECSPI2 */
+ ecspi2: ecspi@83fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
@@ -471,7 +474,7 @@
status = "disabled";
};
- sdma@83fb0000 {
+ sdma: sdma@83fb0000 {
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
@@ -480,7 +483,7 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
- cspi@83fc0000 {
+ cspi: cspi@83fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
@@ -491,7 +494,7 @@
status = "disabled";
};
- i2c@83fc4000 { /* I2C2 */
+ i2c2: i2c@83fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -501,7 +504,7 @@
status = "disabled";
};
- i2c@83fc8000 { /* I2C1 */
+ i2c1: i2c@83fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -521,13 +524,13 @@
status = "disabled";
};
- audmux@83fd0000 {
+ audmux: audmux@83fd0000 {
compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
reg = <0x83fd0000 0x4000>;
status = "disabled";
};
- nand@83fdb000 {
+ nfc: nand@83fdb000 {
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
@@ -545,7 +548,7 @@
status = "disabled";
};
- ethernet@83fec000 {
+ fec: ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 08948af..b007553 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -60,10 +60,17 @@
697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */
701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */
868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */
+ 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
+ >;
+ };
+
+ led_pin_gpio7_7: led_gpio7_7@0 {
+ fsl,pins = <
873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */
>;
};
};
+
};
uart1: serial@53fbc000 {
@@ -100,76 +107,93 @@
pmic: dialog@48 {
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
regulators {
- buck0 {
+ buck1_reg: buck1 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
+ regulator-always-on;
};
- buck1 {
+ buck2_reg: buck2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2075000>;
+ regulator-always-on;
};
- buck2 {
+ buck3_reg: buck3 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
+ regulator-always-on;
};
- buck3 {
+ buck4_reg: buck4 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <2500000>;
+ regulator-always-on;
};
- ldo4 {
+ ldo1_reg: ldo1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
};
- ldo5 {
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
- ldo6 {
+ ldo4_reg: ldo4 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
- ldo7 {
+ ldo5_reg: ldo5 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
- ldo8 {
+ ldo6_reg: ldo6 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
+ regulator-always-on;
};
- ldo9 {
+ ldo7_reg: ldo7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
+ regulator-always-on;
};
- ldo10 {
+ ldo8_reg: ldo8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
+ regulator-always-on;
};
- ldo11 {
+ ldo9_reg: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
+ regulator-always-on;
};
- ldo12 {
+ ldo10_reg: ldo10 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
- };
-
- ldo13 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
+ regulator-always-on;
};
};
};
@@ -216,6 +240,8 @@
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio7_7>;
user {
label = "Heartbeat";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index da9a047..552aed4 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -88,21 +88,23 @@
reg = <0x50000000 0x40000>;
ranges;
- esdhc@50004000 { /* ESDHC1 */
+ esdhc1: esdhc@50004000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks 44>, <&clks 0>, <&clks 71>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- esdhc@50008000 { /* ESDHC2 */
+ esdhc2: esdhc@50008000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks 45>, <&clks 0>, <&clks 72>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
@@ -115,7 +117,7 @@
status = "disabled";
};
- ecspi@50010000 { /* ECSPI1 */
+ ecspi1: ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -136,47 +138,49 @@
status = "disabled";
};
- esdhc@50020000 { /* ESDHC3 */
+ esdhc3: esdhc@50020000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks 46>, <&clks 0>, <&clks 73>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- esdhc@50024000 { /* ESDHC4 */
+ esdhc4: esdhc@50024000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks 47>, <&clks 0>, <&clks 74>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
};
- usb@53f80000 {
+ usbotg: usb@53f80000 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
status = "disabled";
};
- usb@53f80200 {
+ usbh1: usb@53f80200 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
status = "disabled";
};
- usb@53f80400 {
+ usbh2: usb@53f80400 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
status = "disabled";
};
- usb@53f80600 {
+ usbh3: usb@53f80600 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
@@ -223,14 +227,14 @@
#interrupt-cells = <2>;
};
- wdog@53f98000 { /* WDOG1 */
+ wdog1: wdog@53f98000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
clocks = <&clks 0>;
};
- wdog@53f9c000 { /* WDOG2 */
+ wdog2: wdog@53f9c000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
@@ -238,7 +242,7 @@
status = "disabled";
};
- iomuxc@53fa8000 {
+ iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
@@ -338,6 +342,24 @@
};
};
+ can1 {
+ pinctrl_can1_1: can1grp-1 {
+ fsl,pins = <
+ 847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
+ 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
+ >;
+ };
+ };
+
+ can2 {
+ pinctrl_can2_1: can2grp-1 {
+ fsl,pins = <
+ 67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
+ 74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
+ >;
+ };
+ };
+
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <
@@ -356,6 +378,15 @@
};
};
+ i2c3 {
+ pinctrl_i2c3_1: i2c3grp-1 {
+ fsl,pins = <
+ 1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */
+ 1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */
+ >;
+ };
+ };
+
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
@@ -391,6 +422,25 @@
>;
};
};
+
+ uart4 {
+ pinctrl_uart4_1: uart4grp-1 {
+ fsl,pins = <
+ 11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
+ 18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
+ >;
+ };
+ };
+
+ uart5 {
+ pinctrl_uart5_1: uart5grp-1 {
+ fsl,pins = <
+ 24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
+ 31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
+ >;
+ };
+ };
+
};
pwm1: pwm@53fb4000 {
@@ -484,7 +534,7 @@
#interrupt-cells = <2>;
};
- i2c@53fec000 { /* I2C3 */
+ i2c3: i2c@53fec000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -520,7 +570,7 @@
status = "disabled";
};
- ecspi@63fac000 { /* ECSPI2 */
+ ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -531,7 +581,7 @@
status = "disabled";
};
- sdma@63fb0000 {
+ sdma: sdma@63fb0000 {
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
@@ -540,7 +590,7 @@
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
- cspi@63fc0000 {
+ cspi: cspi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
@@ -551,7 +601,7 @@
status = "disabled";
};
- i2c@63fc4000 { /* I2C2 */
+ i2c2: i2c@63fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -561,7 +611,7 @@
status = "disabled";
};
- i2c@63fc8000 { /* I2C1 */
+ i2c1: i2c@63fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -581,13 +631,13 @@
status = "disabled";
};
- audmux@63fd0000 {
+ audmux: audmux@63fd0000 {
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
reg = <0x63fd0000 0x4000>;
status = "disabled";
};
- nand@63fdb000 {
+ nfc: nand@63fdb000 {
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
@@ -605,7 +655,7 @@
status = "disabled";
};
- ethernet@63fec000 {
+ fec: ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..826e4ad
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Automotive Board";
+ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ soc {
+ aips-bus@02000000 { /* AIPS1 */
+ iomuxc@020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
+ 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
+ >;
+ };
+ };
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ uart4: serial@021f0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "okay";
+ };
+
+ ethernet@02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
+ cd-gpios = <&gpio6 15 0>;
+ wp-gpios = <&gpio1 13 0>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index e596c28c..a424025 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -38,6 +38,8 @@
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
+ 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
+ 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
@@ -73,4 +75,20 @@
};
};
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 4 0>;
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 5 0>;
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index cce1d87..d6265ca 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -36,6 +36,14 @@
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 792000 1100000
+ 396000 950000
+ 198000 850000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ cpu0-supply = <®_cpu>;
};
cpu@1 {
@@ -100,7 +108,7 @@
clocks = <&clks 106>;
};
- gpmi-nand@00112000 {
+ nfc: gpmi-nand@00112000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
@@ -144,12 +152,12 @@
reg = <0x02000000 0x40000>;
ranges;
- spdif@02004000 {
+ spdif: spdif@02004000 {
reg = <0x02004000 0x4000>;
interrupts = <0 52 0x04>;
};
- ecspi@02008000 { /* eCSPI1 */
+ ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -160,7 +168,7 @@
status = "disabled";
};
- ecspi@0200c000 { /* eCSPI2 */
+ ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -171,7 +179,7 @@
status = "disabled";
};
- ecspi@02010000 { /* eCSPI3 */
+ ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -182,7 +190,7 @@
status = "disabled";
};
- ecspi@02014000 { /* eCSPI4 */
+ ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -193,7 +201,7 @@
status = "disabled";
};
- ecspi@02018000 { /* eCSPI5 */
+ ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -213,7 +221,7 @@
status = "disabled";
};
- esai@02024000 {
+ esai: esai@02024000 {
reg = <0x02024000 0x4000>;
interrupts = <0 51 0x04>;
};
@@ -248,7 +256,7 @@
status = "disabled";
};
- asrc@02034000 {
+ asrc: asrc@02034000 {
reg = <0x02034000 0x4000>;
interrupts = <0 50 0x04>;
};
@@ -258,7 +266,7 @@
};
};
- vpu@02040000 {
+ vpu: vpu@02040000 {
reg = <0x02040000 0x3c000>;
interrupts = <0 3 0x04 0 12 0x04>;
};
@@ -267,7 +275,7 @@
reg = <0x0207c000 0x4000>;
};
- pwm@02080000 { /* PWM1 */
+ pwm1: pwm@02080000 {
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
@@ -276,7 +284,7 @@
clock-names = "ipg", "per";
};
- pwm@02084000 { /* PWM2 */
+ pwm2: pwm@02084000 {
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
@@ -285,7 +293,7 @@
clock-names = "ipg", "per";
};
- pwm@02088000 { /* PWM3 */
+ pwm3: pwm@02088000 {
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
@@ -294,7 +302,7 @@
clock-names = "ipg", "per";
};
- pwm@0208c000 { /* PWM4 */
+ pwm4: pwm@0208c000 {
#pwm-cells = <2>;
compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
@@ -303,17 +311,17 @@
clock-names = "ipg", "per";
};
- flexcan@02090000 { /* CAN1 */
+ can1: flexcan@02090000 {
reg = <0x02090000 0x4000>;
interrupts = <0 110 0x04>;
};
- flexcan@02094000 { /* CAN2 */
+ can2: flexcan@02094000 {
reg = <0x02094000 0x4000>;
interrupts = <0 111 0x04>;
};
- gpt@02098000 {
+ gpt: gpt@02098000 {
compatible = "fsl,imx6q-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 0x04>;
@@ -389,19 +397,19 @@
#interrupt-cells = <2>;
};
- kpp@020b8000 {
+ kpp: kpp@020b8000 {
reg = <0x020b8000 0x4000>;
interrupts = <0 82 0x04>;
};
- wdog@020bc000 { /* WDOG1 */
+ wdog1: wdog@020bc000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 0x04>;
clocks = <&clks 0>;
};
- wdog@020c0000 { /* WDOG2 */
+ wdog2: wdog@020c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 0x04>;
@@ -463,7 +471,7 @@
anatop-max-voltage = <2750000>;
};
- regulator-vddcore@140 {
+ reg_cpu: regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
@@ -521,27 +529,35 @@
};
snvs@020cc000 {
- reg = <0x020cc000 0x4000>;
- interrupts = <0 19 0x04 0 20 0x04>;
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+
+ snvs-rtc-lp@34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
};
- epit@020d0000 { /* EPIT1 */
+ epit1: epit@020d0000 { /* EPIT1 */
reg = <0x020d0000 0x4000>;
interrupts = <0 56 0x04>;
};
- epit@020d4000 { /* EPIT2 */
+ epit2: epit@020d4000 { /* EPIT2 */
reg = <0x020d4000 0x4000>;
interrupts = <0 57 0x04>;
};
- src@020d8000 {
+ src: src@020d8000 {
compatible = "fsl,imx6q-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 0x04 0 96 0x04>;
};
- gpc@020dc000 {
+ gpc: gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <0 89 0x04 0 90 0x04>;
@@ -552,7 +568,7 @@
reg = <0x020e0000 0x38>;
};
- iomuxc@020e0000 {
+ iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
@@ -765,17 +781,17 @@
};
};
- dcic@020e4000 { /* DCIC1 */
+ dcic1: dcic@020e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 124 0x04>;
};
- dcic@020e8000 { /* DCIC2 */
+ dcic2: dcic@020e8000 {
reg = <0x020e8000 0x4000>;
interrupts = <0 125 0x04>;
};
- sdma@020ec000 {
+ sdma: sdma@020ec000 {
compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 0x04>;
@@ -801,7 +817,7 @@
reg = <0x0217c000 0x4000>;
};
- usb@02184000 { /* USB OTG */
+ usbotg: usb@02184000 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 0x04>;
@@ -811,7 +827,7 @@
status = "disabled";
};
- usb@02184200 { /* USB1 */
+ usbh1: usb@02184200 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 40 0x04>;
@@ -821,7 +837,7 @@
status = "disabled";
};
- usb@02184400 { /* USB2 */
+ usbh2: usb@02184400 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 41 0x04>;
@@ -830,7 +846,7 @@
status = "disabled";
};
- usb@02184600 { /* USB3 */
+ usbh3: usb@02184600 {
compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
reg = <0x02184600 0x200>;
interrupts = <0 42 0x04>;
@@ -839,14 +855,14 @@
status = "disabled";
};
- usbmisc: usbmisc@02184800 {
+ usbmisc: usbmisc: usbmisc@02184800 {
#index-cells = <1>;
compatible = "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks 162>;
};
- ethernet@02188000 {
+ fec: ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
@@ -860,43 +876,47 @@
interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
};
- usdhc@02190000 { /* uSDHC1 */
+ usdhc1: usdhc@02190000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 0x04>;
clocks = <&clks 163>, <&clks 163>, <&clks 163>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- usdhc@02194000 { /* uSDHC2 */
+ usdhc2: usdhc@02194000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 0x04>;
clocks = <&clks 164>, <&clks 164>, <&clks 164>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- usdhc@02198000 { /* uSDHC3 */
+ usdhc3: usdhc@02198000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 0x04>;
clocks = <&clks 165>, <&clks 165>, <&clks 165>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- usdhc@0219c000 { /* uSDHC4 */
+ usdhc4: usdhc@0219c000 {
compatible = "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 0x04>;
clocks = <&clks 166>, <&clks 166>, <&clks 166>;
clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
status = "disabled";
};
- i2c@021a0000 { /* I2C1 */
+ i2c1: i2c@021a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -906,7 +926,7 @@
status = "disabled";
};
- i2c@021a4000 { /* I2C2 */
+ i2c2: i2c@021a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -916,7 +936,7 @@
status = "disabled";
};
- i2c@021a8000 { /* I2C3 */
+ i2c3: i2c@021a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -930,12 +950,12 @@
reg = <0x021ac000 0x4000>;
};
- mmdc@021b0000 { /* MMDC0 */
+ mmdc0: mmdc@021b0000 { /* MMDC0 */
compatible = "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
- mmdc@021b4000 { /* MMDC1 */
+ mmdc1: mmdc@021b4000 { /* MMDC1 */
reg = <0x021b4000 0x4000>;
};
@@ -963,7 +983,7 @@
interrupts = <0 109 0x04>;
};
- audmux@021d8000 {
+ audmux: audmux@021d8000 {
compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
new file mode 100644
index 0000000..d6c9d65
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -0,0 +1,44 @@
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ compatible = "marvell,88f6281-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pmx_nand: pmx-nand {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp18",
+ "mpp19";
+ marvell,function = "nand";
+ };
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp5", "mpp21", "mpp23";
+ marvell,function = "sata0";
+ };
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp4", "mpp20", "mpp22";
+ marvell,function = "sata1";
+ };
+ pmx_spi: pmx-spi {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+ marvell,function = "spi";
+ };
+ pmx_twsi0: pmx-twsi0 {
+ marvell,pins = "mpp8", "mpp9";
+ marvell,function = "twsi0";
+ };
+ pmx_uart0: pmx-uart0 {
+ marvell,pins = "mpp10", "mpp11";
+ marvell,function = "uart0";
+ };
+ pmx_uart1: pmx-uart1 {
+ marvell,pins = "mpp13", "mpp14";
+ marvell,function = "uart1";
+ };
+ pmx_sdio: pmx-sdio {
+ marvell,pins = "mpp12", "mpp13", "mpp14",
+ "mpp15", "mpp16", "mpp17";
+ marvell,function = "sdio";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
new file mode 100644
index 0000000..9ae2004
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -0,0 +1,45 @@
+/ {
+ ocp@f1000000 {
+
+ pinctrl: pinctrl@10000 {
+ compatible = "marvell,88f6282-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp5", "mpp21", "mpp23";
+ marvell,function = "sata0";
+ };
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp4", "mpp20", "mpp22";
+ marvell,function = "sata1";
+ };
+ pmx_spi: pmx-spi {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+ marvell,function = "spi";
+ };
+ pmx_twsi0: pmx-twsi0 {
+ marvell,pins = "mpp8", "mpp9";
+ marvell,function = "twsi0";
+ };
+ pmx_uart0: pmx-uart0 {
+ marvell,pins = "mpp10", "mpp11";
+ marvell,function = "uart0";
+ };
+
+ pmx_uart1: pmx-uart1 {
+ marvell,pins = "mpp13", "mpp14";
+ marvell,function = "uart1";
+ };
+ };
+
+ i2c@11100 {
+ compatible = "marvell,mv64xxx-i2c";
+ reg = <0x11100 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <32>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
new file mode 100644
index 0000000..3271e4c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -0,0 +1,31 @@
+/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ compatible = "marvell,98dx4122-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pmx_nand: pmx-nand {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp18",
+ "mpp19";
+ marvell,function = "nand";
+ };
+ pmx_spi: pmx-spi {
+ marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+ marvell,function = "spi";
+ };
+ pmx_twsi0: pmx-twsi0 {
+ marvell,pins = "mpp8", "mpp9";
+ marvell,function = "twsi0";
+ };
+ pmx_uart0: pmx-uart0 {
+ marvell,pins = "mpp10", "mpp11";
+ marvell,function = "uart0";
+ };
+ pmx_uart1: pmx-uart1 {
+ marvell,pins = "mpp13", "mpp14";
+ marvell,function = "uart1";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 9b32d02..6875ac0 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -1,4 +1,5 @@
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "D-Link DNS NASes (kirkwood-based)";
@@ -35,7 +36,116 @@
6000 2>;
};
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio1 4 0>;
+ };
+
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_nand &pmx_uart1
+ &pmx_sata0 &pmx_sata1
+ &pmx_led_power
+ &pmx_led_red_right_hdd
+ &pmx_led_red_left_hdd
+ &pmx_led_red_usb_325
+ &pmx_button_power
+ &pmx_led_red_usb_320
+ &pmx_power_off &pmx_power_back_on
+ &pmx_power_sata0 &pmx_power_sata1
+ &pmx_present_sata0 &pmx_present_sata1
+ &pmx_led_white_usb &pmx_fan_tacho
+ &pmx_fan_high_speed &pmx_fan_low_speed
+ &pmx_button_unmount &pmx_button_reset
+ &pmx_temp_alarm >;
+ pinctrl-names = "default";
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata1";
+ };
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp21";
+ marvell,function = "sata0";
+ };
+ pmx_led_power: pmx-led-power {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+ pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+ pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ pmx_led_red_usb_325: pmx-led-red-usb-325 {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_button_power: pmx-button-power {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ pmx_led_red_usb_320: pmx-led-red-usb-320 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_power_off: pmx-power-off {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_power_back_on: pmx-power-back-on {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_power_sata0: pmx-power-sata0 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_power_sata1: pmx-power-sata1 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_present_sata0: pmx-present-sata0 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_present_sata1: pmx-present-sata1 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_white_usb: pmx-led-white-usb {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_fan_tacho: pmx-fan-tacho {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_fan_high_speed: pmx-fan-high-speed {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_fan_low_speed: pmx-fan-low-speed {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_button_unmount: pmx-button-unmount {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ pmx_temp_alarm: pmx-temp-alarm {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ };
sata@80000 {
status = "okay";
nr-ports = <2>;
@@ -43,6 +153,7 @@
nand@3000000 {
status = "okay";
+ chip-delay = <35>;
partition@0 {
label = "u-boot";
@@ -76,4 +187,33 @@
};
};
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA0 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 7 0>;
+ };
+ sata1_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 8 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 08a5824..2e3dd34 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "Seagate FreeAgent Dockstar";
@@ -16,6 +17,25 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_usb_power_enable
+ &pmx_led_green &pmx_led_orange >;
+ pinctrl-names = "default";
+
+ pmx_usb_power_enable: pmx-usb-power-enable {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_led_green: pmx-led-green {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_led_orange: pmx-led-orange {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
@@ -54,4 +74,21 @@
gpios = <&gpio1 15 1>;
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 29 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 26e281f..f2d386c 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "Globalscale Technologies Dreamplug";
@@ -16,6 +17,26 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_spi
+ &pmx_led_bluetooth &pmx_led_wifi
+ &pmx_led_wifi_ap >;
+ pinctrl-names = "default";
+
+ pmx_led_bluetooth: pmx-led-bluetooth {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_led_wifi: pmx-led-wifi {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ pmx_led_wifi_ap: pmx-led-wifi-ap {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ };
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 7c8238f..1b133e0 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "Seagate GoFlex Net";
@@ -16,6 +17,61 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+ &pmx_led_left_cap_0 &pmx_led_left_cap_1
+ &pmx_led_left_cap_2 &pmx_led_left_cap_3
+ &pmx_led_right_cap_0 &pmx_led_right_cap_1
+ &pmx_led_right_cap_2 &pmx_led_right_cap_3
+ >;
+ pinctrl-names = "default";
+
+ pmx_usb_power_enable: pmx-usb-power-enable {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ pmx_led_right_cap_0: pmx-led_right_cap_0 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_right_cap_1: pmx-led_right_cap_1 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_right_cap_2: pmx-led_right_cap_2 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_led_right_cap_3: pmx-led_right_cap_3 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_led_left_cap_0: pmx-led_left_cap_0 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_left_cap_1: pmx-led_left_cap_1 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_left_cap_2: pmx-led_left_cap_2 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_left_cap_3: pmx-led_left_cap_3 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_led_green: pmx-led_green {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_led_orange: pmx-led_orange {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
@@ -96,4 +152,21 @@
gpios = <&gpio1 9 0>;
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 29 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 66794ed..71902da 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
@@ -16,6 +17,39 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_nand
+ &pmx_led_os_red &pmx_power_off
+ &pmx_led_os_green &pmx_led_usb_transfer
+ &pmx_button_reset &pmx_button_usb_copy >;
+ pinctrl-names = "default";
+
+ pmx_led_os_red: pmx-led-os-red {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+ pmx_power_off: pmx-power-off {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+ pmx_led_os_green: pmx-led-os-green {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+ pmx_led_usb_transfer: pmx-led-usb-transfer {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ pmx_button_usb_copy: pmx-button-usb-copy {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+ };
serial@12000 {
clock-frequency = <200000000>;
status = "okay";
@@ -79,4 +113,10 @@
gpios = <&gpio0 27 0>;
};
};
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 24 0>;
+ };
+
+
};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index d97cd9d..504f16b 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "Iomega Iconnect";
@@ -18,6 +19,56 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35
+ &pmx_gpio_41 &pmx_gpio_42
+ &pmx_gpio_43 &pmx_gpio_44
+ &pmx_gpio_45 &pmx_gpio_46
+ &pmx_gpio_47 &pmx_gpio_48 >;
+ pinctrl-names = "default";
+
+ pmx_gpio_12: pmx-gpio-12 {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_35: pmx-gpio-35 {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_41: pmx-gpio-41 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_42: pmx-gpio-42 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_43: pmx-gpio-43 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_44: pmx-gpio-44 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_45: pmx-gpio-45 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_46: pmx-gpio-46 {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_47: pmx-gpio-47 {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_gpio_48: pmx-gpio-48 {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ };
i2c@11000 {
status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 865aeec..6cae459 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "Iomega StorCenter ix2-200";
@@ -16,6 +17,94 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_button_reset &pmx_button_power
+ &pmx_led_backup &pmx_led_power
+ &pmx_button_otb &pmx_led_rebuild
+ &pmx_led_health
+ &pmx_led_sata_brt_ctrl_1
+ &pmx_led_sata_brt_ctrl_2
+ &pmx_led_backup_brt_ctrl_1
+ &pmx_led_backup_brt_ctrl_2
+ &pmx_led_power_brt_ctrl_1
+ &pmx_led_power_brt_ctrl_2
+ &pmx_led_health_brt_ctrl_1
+ &pmx_led_health_brt_ctrl_2
+ &pmx_led_rebuild_brt_ctrl_1
+ &pmx_led_rebuild_brt_ctrl_2 >;
+ pinctrl-names = "default";
+
+ pmx_button_reset: pmx-button-reset {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ pmx_button_power: pmx-button-power {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+ pmx_led_backup: pmx-led-backup {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+ pmx_led_power: pmx-led-power {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+ pmx_button_otb: pmx-button-otb {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+ pmx_led_rebuild: pmx-led-rebuild {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_health: pmx-led_health {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ };
i2c@11000 {
status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 75bdb93..8db3123 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-98dx4122.dtsi"
/ {
model = "Keymile Kirkwood Reference Design";
@@ -16,6 +17,22 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda
+ &pmx_i2c_gpio_scl >;
+ pinctrl-names = "default";
+
+ pmx_i2c_gpio_sda: pmx-gpio-sda {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+ pmx_i2c_gpio_scl: pmx-gpio-scl {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
+ };
+
serial@12000 {
clock-frequency = <200000000>;
status = "ok";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 798e60e..37d45c4 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -1,4 +1,5 @@
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
chosen {
@@ -6,6 +7,71 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
+ &pmx_fan_low &pmx_fan_high
+ &pmx_led_function_red &pmx_led_alarm
+ &pmx_led_info &pmx_led_power
+ &pmx_fan_lock &pmx_button_function
+ &pmx_power_switch &pmx_power_auto_switch
+ &pmx_led_function_blue >;
+ pinctrl-names = "default";
+
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,pins = "mpp10";
+ marvell,function = "gpo";
+ };
+ pmx_usb_vbus: pmx-usb-vbus {
+ marvell,pins = "mpp11";
+ marvell,function = "gpio";
+ };
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp18";
+ marvell,function = "gpo";
+ };
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp19";
+ marvell,function = "gpo";
+ };
+ pmx_led_function_blue: pmx-led-function-blue {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_alarm: pmx-led-alarm {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_led_info: pmx-led-info {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_power: pmx-led-power {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+ pmx_button_function: pmx-button-function {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_power_auto_switch: pmx-power-auto-switch {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_function_red: pmx-led-function_red {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ };
sata@80000 {
status = "okay";
nr-ports = <1>;
@@ -105,4 +171,33 @@
5000 0>;
alarm-gpios = <&gpio1 8 0>;
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 11 0>;
+ };
+ hdd_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 10 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index ac3c080..262c654 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
model = "MPL CEC4";
@@ -16,6 +17,64 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_nand &pmx_uart0
+ &pmx_led_health &pmx_sdio
+ &pmx_sata0 &pmx_sata1
+ &pmx_led_user1o
+ &pmx_led_user1g &pmx_led_user0o
+ &pmx_led_user0g &pmx_led_misc
+ &pmx_sdio_cd
+ >;
+ pinctrl-names = "default";
+
+ pmx_led_health: pmx-led-health {
+ marvell,pins = "mpp7";
+ marvell,function = "gpo";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp34";
+ marvell,function = "sata1";
+ };
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp35";
+ marvell,function = "sata0";
+ };
+
+ pmx_led_user1o: pmx-led-user1o {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_user1g: pmx-led-user1g {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_user0o: pmx-led-user0o {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_user0g: pmx-led-user0g {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_misc: pmx-led-misc {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+
i2c@11000 {
status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 9a2606c..49d3d74 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -1,6 +1,7 @@
/dts-v1/;
/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6282.dtsi"
/ {
model = "Plat'Home OpenBlocksA6";
@@ -29,11 +30,69 @@
nand@3000000 {
chip-delay = <25>;
status = "okay";
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x90000>;
+ };
+
+ partition@90000 {
+ label = "env";
+ reg = <0x90000 0x44000>;
+ };
+
+ partition@d4000 {
+ label = "test";
+ reg = <0xd4000 0x24000>;
+ };
+
+ partition@f4000 {
+ label = "conf";
+ reg = <0xf4000 0x400000>;
+ };
+
+ partition@4f4000 {
+ label = "linux";
+ reg = <0x4f4000 0x1d20000>;
+ };
+
+ partition@2214000 {
+ label = "user";
+ reg = <0x2214000 0x1dec000>;
+ };
};
sata@80000 {
nr-ports = <1>;
status = "okay";
};
+
+ i2c@11100 {
+ status = "okay";
+
+ s35390a: s35390a@30 {
+ compatible = "s35390a";
+ reg = <0x30>;
+ };
+ };
};
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led-red {
+ label = "obsa6:red:stat";
+ gpios = <&gpio1 9 1>;
+ };
+
+ led-green {
+ label = "obsa6:green:stat";
+ gpios = <&gpio1 10 1>;
+ };
+
+ led-yellow {
+ label = "obsa6:yellow:stat";
+ gpios = <&gpio1 11 1>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index ccbf327..8295c83 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -1,8 +1,39 @@
/dts-v1/;
/include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood-6281.dtsi"
/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
+ &pmx_twsi0 &pmx_sata0 &pmx_sata1
+ &pmx_ram_size &pmx_reset_button
+ &pmx_USB_copy_button &pmx_board_id>;
+ pinctrl-names = "default";
+
+ pmx_ram_size: pmx-ram-size {
+ /* RAM: 0: 256 MB, 1: 512 MB */
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_USB_copy_button: pmx-USB-copy-button {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+ pmx_reset_button: pmx-reset-button {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+ pmx_board_id: pmx-board-id {
+ /* 0: TS-11x, 1: TS-21x */
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index fbe9932..df3f95d 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -1,8 +1,39 @@
/dts-v1/;
/include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood-6282.dtsi"
/ {
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+
+ pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
+ &pmx_twsi0 &pmx_sata0 &pmx_sata1
+ &pmx_ram_size &pmx_reset_button
+ &pmx_USB_copy_button &pmx_board_id>;
+ pinctrl-names = "default";
+
+ pmx_ram_size: pmx-ram-size {
+ /* RAM: 0: 256 MB, 1: 512 MB */
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_reset_button: pmx-reset-button {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_USB_copy_button: pmx-USB-copy-button {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_board_id: pmx-board-id {
+ /* 0: TS-11x, 1: TS-21x */
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ };
+ };
+
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 4e5b815..a990c30 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -4,6 +4,10 @@
compatible = "marvell,kirkwood";
interrupt-parent = <&intc>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ };
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
interrupt-controller;
@@ -24,7 +28,8 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
interrupts = <35>, <36>, <37>, <38>;
};
@@ -33,7 +38,8 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0x10140 0x40>;
- ngpio = <18>;
+ ngpios = <18>;
+ interrupt-controller;
interrupts = <39>, <40>, <41>;
};
@@ -77,6 +83,13 @@
status = "okay";
};
+ ehci@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <19>;
+ status = "okay";
+ };
+
sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index e5ffe96..1582f48 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -182,6 +182,13 @@
pnx,timeout = <0x64>;
};
+ mpwm: mpwm@400E8000 {
+ compatible = "nxp,lpc3220-motor-pwm";
+ reg = <0x400E8000 0x78>;
+ status = "disabled";
+ #pwm-cells = <2>;
+ };
+
i2cusb: i2c@31020300 {
compatible = "nxp,pnx-i2c";
reg = <0x31020300 0x100>;
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index c6f85f0..27f31a5 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -14,7 +14,7 @@
/ {
model = "Calao Systems Snowball platform with device tree";
- compatible = "calaosystems,snowball-a9500";
+ compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
memory {
reg = <0x00000000 0x20000000>;
@@ -147,10 +147,10 @@
};
// External Micro SD slot
- sdi@80126000 {
+ sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
- bus-width = <8>;
+ bus-width = <4>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
@@ -161,7 +161,7 @@
};
// On-board eMMC
- sdi@80114000 {
+ sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <8>;
@@ -214,5 +214,137 @@
cpufreq-cooling {
status = "okay";
};
+
+ prcmu@80157000 {
+ db8500-prcmu-regulators {
+ db8500_vape_reg: db8500_vape {
+ regulator-name = "db8500-vape";
+ };
+
+ db8500_varm_reg: db8500_varm {
+ regulator-name = "db8500-varm";
+ };
+
+ db8500_vmodem_reg: db8500_vmodem {
+ regulator-name = "db8500-vmodem";
+ };
+
+ db8500_vpll_reg: db8500_vpll {
+ regulator-name = "db8500-vpll";
+ };
+
+ db8500_vsmps1_reg: db8500_vsmps1 {
+ regulator-name = "db8500-vsmps1";
+ };
+
+ db8500_vsmps2_reg: db8500_vsmps2 {
+ regulator-name = "db8500-vsmps2";
+ };
+
+ db8500_vsmps3_reg: db8500_vsmps3 {
+ regulator-name = "db8500-vsmps3";
+ };
+
+ db8500_vrf1_reg: db8500_vrf1 {
+ regulator-name = "db8500-vrf1";
+ };
+
+ db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ regulator-name = "db8500-sva-mmdsp";
+ };
+
+ db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ regulator-name = "db8500-sva-mmdsp-ret";
+ };
+
+ db8500_sva_pipe_reg: db8500_sva_pipe {
+ regulator-name = "db8500_sva_pipe";
+ };
+
+ db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ regulator-name = "db8500_sia_mmdsp";
+ };
+
+ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+ regulator-name = "db8500-sia-mmdsp-ret";
+ };
+
+ db8500_sia_pipe_reg: db8500_sia_pipe {
+ regulator-name = "db8500-sia-pipe";
+ };
+
+ db8500_sga_reg: db8500_sga {
+ regulator-name = "db8500-sga";
+ };
+
+ db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ regulator-name = "db8500-b2r2-mcde";
+ };
+
+ db8500_esram12_reg: db8500_esram12 {
+ regulator-name = "db8500-esram12";
+ };
+
+ db8500_esram12_ret_reg: db8500_esram12_ret {
+ regulator-name = "db8500-esram12-ret";
+ };
+
+ db8500_esram34_reg: db8500_esram34 {
+ regulator-name = "db8500-esram34";
+ };
+
+ db8500_esram34_ret_reg: db8500_esram34_ret {
+ regulator-name = "db8500-esram34-ret";
+ };
+ };
+
+ ab8500@5 {
+ ab8500-regulators {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_usb_reg: ab8500_ldo_usb {
+ regulator-name = "dummy";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
new file mode 100644
index 0000000..39446a2
--- /dev/null
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc-u9500 {
+ i2c@80004000 {
+ stmpe1601: stmpe1601@40 {
+ compatible = "st,stmpe1601";
+ reg = <0x40>;
+ interrupts = <26 0x1>;
+ interrupt-parent = <&gpio6>;
+ interrupt-controller;
+
+ wakeup-source;
+ st,autosleep-timeout = <1024>;
+
+ stmpe_keypad {
+ compatible = "st,stmpe-keypad";
+
+ debounce-interval = <64>;
+ st,scan-count = <8>;
+ st,no-autorepeat;
+
+ linux,keymap = <0x205006b
+ 0x4010074
+ 0x3050072
+ 0x1030004
+ 0x502006a
+ 0x500000a
+ 0x5008b
+ 0x706001c
+ 0x405000b
+ 0x6070003
+ 0x3040067
+ 0x303006c
+ 0x60400e7
+ 0x602009e
+ 0x4020073
+ 0x5050002
+ 0x4030069
+ 0x3020008>;
+ };
+ };
+ };
+
+ i2c@80110000 {
+ bu21013_tp@0x5c {
+ compatible = "rhom,bu21013_tp";
+ reg = <0x5c>;
+ touch-gpio = <&gpio2 20 0x4>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+ rhom,touch-max-x = <384>;
+ rhom,touch-max-y = <704>;
+ rhom,flip-y;
+ };
+
+ bu21013_tp@0x5d {
+ compatible = "rhom,bu21013_tp";
+ reg = <0x5d>;
+ touch-gpio = <&gpio2 20 0x4>;
+ avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+ rhom,touch-max-x = <384>;
+ rhom,touch-max-y = <704>;
+ rhom,flip-y;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 74b8a47..43eb72a 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -262,9 +274,9 @@
};
};
- i2c@7000c400 {
+ hdmi_ddc: i2c@7000c400 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
i2c@7000c500 {
@@ -369,13 +381,13 @@
regulator-max-microvolt = <1800000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -396,6 +408,11 @@
};
};
};
+
+ temperature-sensor@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
};
pmc {
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 331a3ef..2894800 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -6,6 +6,12 @@
model = "Avionic Design Plutux board";
compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+ host1x {
+ hdmi {
+ status = "okay";
+ };
+ };
+
i2c@7000c000 {
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index e58a0e6..4204598 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -561,6 +561,12 @@
status = "okay";
};
+ sdhci@c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ bus-width = <4>;
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 5b3d8b1..a239ccd 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -8,6 +8,16 @@
reg = <0x00000000 0x20000000>;
};
+ host1x {
+ hdmi {
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -62,10 +72,6 @@
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
- ddc {
- nvidia,pins = "ddc";
- nvidia,function = "i2c2";
- };
dta {
nvidia,pins = "dta", "dtd";
nvidia,function = "sdio2";
@@ -91,7 +97,7 @@
nvidia,function = "pcie";
};
hdint {
- nvidia,pins = "hdint", "pta";
+ nvidia,pins = "hdint";
nvidia,function = "hdmi";
};
i2cp {
@@ -230,6 +236,39 @@
nvidia,pull = <1>;
};
};
+
+ state_i2cmux_ddc: pinmux_i2cmux_ddc {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_pta: pinmux_i2cmux_pta {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
+ };
+
+ state_i2cmux_idle: pinmux_i2cmux_idle {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
};
i2s@70002800 {
@@ -246,6 +285,36 @@
status = "okay";
};
+ i2c@7000c400 {
+ clock-frequency = <100000>;
+ status = "okay";
+ };
+
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&{/i2c@7000c400}>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ hdmi_ddc: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
i2c@7000d000 {
clock-frequency = <400000>;
status = "okay";
@@ -348,13 +417,13 @@
regulator-max-microvolt = <2850000>;
};
- ldo7 {
+ hdmi_vdd_reg: ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo8 {
+ hdmi_pll_reg: ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -381,6 +450,11 @@
};
};
};
+
+ temperature-sensor@4c {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ };
};
pmc {
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 9aff31b..402b210 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -6,10 +6,13 @@
model = "Avionic Design Tamonten Evaluation Carrier";
compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
- i2c@7000c000 {
- clock-frequency = <400000>;
- status = "okay";
+ host1x {
+ hdmi {
+ status = "okay";
+ };
+ };
+ i2c@7000c000 {
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 27fb8a6..b70b4cb 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -249,14 +261,24 @@
clock-frequency = <216000000>;
};
- i2c@7000c000 {
+ dvi_ddc: i2c@7000c000 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
- i2c@7000c400 {
+ spi@7000c380 {
status = "okay";
- clock-frequency = <400000>;
+ spi-max-frequency = <48000000>;
+ spi-flash@0 {
+ compatible = "winbond,w25q80bl";
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ };
+ };
+
+ hdmi_ddc: i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
};
i2c@7000c500 {
@@ -300,6 +322,30 @@
bus-width = <4>;
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_vdd_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "avdd_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ hdmi_pll_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-trimslice";
nvidia,i2s-controller = <&tegra_i2s1>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 86854f1..adc4754 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -64,11 +64,6 @@
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
- ddc {
- nvidia,pins = "ddc", "owc", "spdi", "spdo",
- "uac";
- nvidia,function = "rsvd2";
- };
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
@@ -98,7 +93,7 @@
nvidia,function = "pcie";
};
hdint {
- nvidia,pins = "hdint", "pta";
+ nvidia,pins = "hdint";
nvidia,function = "hdmi";
};
i2cp {
@@ -129,6 +124,10 @@
"lspi", "lvp1", "lvs";
nvidia,function = "displaya";
};
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
@@ -237,6 +236,49 @@
"ld23_22";
nvidia,pull = <1>;
};
+ drive_sdio1 {
+ nvidia,pins = "drive_sdio1";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <1>;
+ nvidia,low-power-mode = <3>;
+ nvidia,pull-down-strength = <31>;
+ nvidia,pull-up-strength = <31>;
+ nvidia,slew-rate-rising = <3>;
+ nvidia,slew-rate-falling = <3>;
+ };
+ };
+
+ state_i2cmux_ddc: pinmux_i2cmux_ddc {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_pta: pinmux_i2cmux_pta {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
+ };
+
+ state_i2cmux_idle: pinmux_i2cmux_idle {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
};
};
@@ -281,6 +323,31 @@
clock-frequency = <400000>;
};
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&{/i2c@7000c400}>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
@@ -406,6 +473,11 @@
};
};
};
+
+ temperature-sensor@4c {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ };
};
pmc {
@@ -425,6 +497,12 @@
status = "okay";
};
+ sdhci@c8000000 {
+ status = "okay";
+ power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ bus-width = <4>;
+ };
+
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 94a71c9..20d576ec 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -10,6 +10,18 @@
reg = <0x00000000 0x20000000>;
};
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&hdmi_vdd_reg>;
+ pll-supply = <&hdmi_pll_reg>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -246,6 +258,11 @@
clock-frequency = <216000000>;
};
+ hdmi_ddc: i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
@@ -356,7 +373,7 @@
regulator-always-on;
};
- ldo6 {
+ hdmi_pll_reg: ldo6 {
regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -388,7 +405,7 @@
regulator-always-on;
};
- ldo11 {
+ hdmi_vdd_reg: ldo11 {
regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f40cfba..fba998e 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,93 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
+ host1x {
+ compatible = "nvidia,tegra20-host1x", "simple-bus";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <0 65 0x04 /* mpcore syncpt */
+ 0 67 0x04>; /* mpcore general */
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ mpe {
+ compatible = "nvidia,tegra20-mpe";
+ reg = <0x54040000 0x00040000>;
+ interrupts = <0 68 0x04>;
+ };
+
+ vi {
+ compatible = "nvidia,tegra20-vi";
+ reg = <0x54080000 0x00040000>;
+ interrupts = <0 69 0x04>;
+ };
+
+ epp {
+ compatible = "nvidia,tegra20-epp";
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <0 70 0x04>;
+ };
+
+ isp {
+ compatible = "nvidia,tegra20-isp";
+ reg = <0x54100000 0x00040000>;
+ interrupts = <0 71 0x04>;
+ };
+
+ gr2d {
+ compatible = "nvidia,tegra20-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <0 72 0x04>;
+ };
+
+ gr3d {
+ compatible = "nvidia,tegra20-gr3d";
+ reg = <0x54180000 0x00040000>;
+ };
+
+ dc@54200000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <0 73 0x04>;
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <0 74 0x04>;
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ hdmi {
+ compatible = "nvidia,tegra20-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <0 75 0x04>;
+ status = "disabled";
+ };
+
+ tvo {
+ compatible = "nvidia,tegra20-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <0 76 0x04>;
+ status = "disabled";
+ };
+
+ dsi {
+ compatible = "nvidia,tegra20-dsi";
+ reg = <0x54300000 0x00040000>;
+ status = "disabled";
+ };
+ };
+
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
@@ -147,6 +234,16 @@
status = "disabled";
};
+ spi@7000c380 {
+ compatible = "nvidia,tegra20-sflash";
+ reg = <0x7000c380 0x80>;
+ interrupts = <0 39 0x04>;
+ nvidia,dma-request-selector = <&apbdma 11>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c@7000c400 {
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c400 0x100>;
@@ -174,6 +271,46 @@
status = "disabled";
};
+ spi@7000d400 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d400 0x200>;
+ interrupts = <0 59 0x04>;
+ nvidia,dma-request-selector = <&apbdma 15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@7000d600 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d600 0x200>;
+ interrupts = <0 82 0x04>;
+ nvidia,dma-request-selector = <&apbdma 16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@7000d800 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000d480 0x200>;
+ interrupts = <0 83 0x04>;
+ nvidia,dma-request-selector = <&apbdma 17>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@7000da00 {
+ compatible = "nvidia,tegra20-slink";
+ reg = <0x7000da00 0x200>;
+ interrupts = <0 93 0x04>;
+ nvidia,dma-request-selector = <&apbdma 18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmc {
compatible = "nvidia,tegra20-pmc";
reg = <0x7000e400 0x400>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index dd4222f..adc88aa 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -83,5 +83,11 @@
gpio = <&gpio 83 0>; /* GPIO PK3 */
};
};
+
+ sdhci@78000400 {
+ status = "okay";
+ power-gpios = <&gpio 28 0>; /* gpio PD4 */
+ bus-width = <4>;
+ };
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index 0828f09..08163e1 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -95,4 +95,10 @@
gpio = <&gpio 232 0>; /* GPIO PDD0 */
};
};
+
+ sdhci@78000400 {
+ status = "okay";
+ power-gpios = <&gpio 27 0>; /* gpio PD3 */
+ bus-width = <4>;
+ };
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index b1271a8..bdb2a66 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -52,6 +52,22 @@
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc3_cmd_pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
@@ -81,6 +97,15 @@
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
+ sdio3 {
+ nvidia,pins = "drive_sdio3";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <0>;
+ nvidia,pull-down-strength = <46>;
+ nvidia,pull-up-strength = <42>;
+ nvidia,slew-rate-rising = <1>;
+ nvidia,slew-rate-falling = <1>;
+ };
};
};
@@ -250,6 +275,16 @@
};
};
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ spi-flash@1 {
+ compatible = "winbond,w25q32";
+ reg = <1>;
+ spi-max-frequency = <20000000>;
+ };
+ };
+
ahub {
i2s@70080400 {
status = "okay";
@@ -384,6 +419,8 @@
regulator-name = "vdd_com";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
enable-active-high;
gpio = <&gpio 24 0>; /* gpio PD0 */
vin-supply = <&sys_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index fed8dca..efa603d 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,93 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
+ host1x {
+ compatible = "nvidia,tegra30-host1x", "simple-bus";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <0 65 0x04 /* mpcore syncpt */
+ 0 67 0x04>; /* mpcore general */
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ mpe {
+ compatible = "nvidia,tegra30-mpe";
+ reg = <0x54040000 0x00040000>;
+ interrupts = <0 68 0x04>;
+ };
+
+ vi {
+ compatible = "nvidia,tegra30-vi";
+ reg = <0x54080000 0x00040000>;
+ interrupts = <0 69 0x04>;
+ };
+
+ epp {
+ compatible = "nvidia,tegra30-epp";
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <0 70 0x04>;
+ };
+
+ isp {
+ compatible = "nvidia,tegra30-isp";
+ reg = <0x54100000 0x00040000>;
+ interrupts = <0 71 0x04>;
+ };
+
+ gr2d {
+ compatible = "nvidia,tegra30-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <0 72 0x04>;
+ };
+
+ gr3d {
+ compatible = "nvidia,tegra30-gr3d";
+ reg = <0x54180000 0x00040000>;
+ };
+
+ dc@54200000 {
+ compatible = "nvidia,tegra30-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <0 73 0x04>;
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra30-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <0 74 0x04>;
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ hdmi {
+ compatible = "nvidia,tegra30-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <0 75 0x04>;
+ status = "disabled";
+ };
+
+ tvo {
+ compatible = "nvidia,tegra30-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <0 76 0x04>;
+ status = "disabled";
+ };
+
+ dsi {
+ compatible = "nvidia,tegra30-dsi";
+ reg = <0x54300000 0x00040000>;
+ status = "disabled";
+ };
+ };
+
cache-controller@50043000 {
compatible = "arm,pl310-cache";
reg = <0x50043000 0x1000>;
@@ -177,6 +264,66 @@
status = "disabled";
};
+ spi@7000d400 {
+ compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+ reg = <0x7000d400 0x200>;
+ interrupts = <0 59 0x04>;
+ nvidia,dma-request-selector = <&apbdma 15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@7000d600 {
+ compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+ reg = <0x7000d600 0x200>;
+ interrupts = <0 82 0x04>;
+ nvidia,dma-request-selector = <&apbdma 16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@7000d800 {
+ compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+ reg = <0x7000d480 0x200>;
+ interrupts = <0 83 0x04>;
+ nvidia,dma-request-selector = <&apbdma 17>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@7000da00 {
+ compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+ reg = <0x7000da00 0x200>;
+ interrupts = <0 93 0x04>;
+ nvidia,dma-request-selector = <&apbdma 18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@7000dc00 {
+ compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+ reg = <0x7000dc00 0x200>;
+ interrupts = <0 94 0x04>;
+ nvidia,dma-request-selector = <&apbdma 27>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi@7000de00 {
+ compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+ reg = <0x7000de00 0x200>;
+ interrupts = <0 79 0x04>;
+ nvidia,dma-request-selector = <&apbdma 28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pmc {
compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
reg = <0x7000e400 0x400>;
diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts
new file mode 100644
index 0000000..95892ec
--- /dev/null
+++ b/arch/arm/boot/dts/u9540.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+ model = "ST-Ericsson U9540 platform with Device Tree";
+ compatible = "st-ericsson,u9540";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ soc-u9500 {
+ uart@80120000 {
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ status = "okay";
+ };
+
+ // External Micro SD slot
+ sdi0_per1@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ mmc-cap-sd-highspeed;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+ cd-gpios = <&gpio7 6 0x4>; // 230
+ cd-inverted;
+
+ status = "okay";
+ };
+
+
+ // WLAN SDIO channel
+ sdi1_per2@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+
+ status = "okay";
+ };
+
+ // On-board eMMC
+ sdi4_per2@80114000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+ mmc-cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
new file mode 100644
index 0000000..401c126
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "xlnx,zynq-7000";
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+
+ intc: interrupt-controller@f8f01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xF8F01000 0x1000>,
+ <0xF8F00100 0x100>;
+ };
+
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xF8F02000 0x1000>;
+ arm,data-latency = <2 3 2>;
+ arm,tag-latency = <2 3 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ uart0: uart@e0000000 {
+ compatible = "xlnx,xuartps";
+ reg = <0xE0000000 0x1000>;
+ interrupts = <0 27 4>;
+ clock = <50000000>;
+ };
+
+ uart1: uart@e0001000 {
+ compatible = "xlnx,xuartps";
+ reg = <0xE0001000 0x1000>;
+ interrupts = <0 50 4>;
+ clock = <50000000>;
+ };
+
+ slcr: slcr@f8000000 {
+ compatible = "xlnx,zynq-slcr";
+ reg = <0xF8000000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ps_clk: ps_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ /* clock-frequency set in board-specific file */
+ clock-output-names = "ps_clk";
+ };
+ armpll: armpll {
+ #clock-cells = <0>;
+ compatible = "xlnx,zynq-pll";
+ clocks = <&ps_clk>;
+ reg = <0x100 0x110>;
+ clock-output-names = "armpll";
+ };
+ ddrpll: ddrpll {
+ #clock-cells = <0>;
+ compatible = "xlnx,zynq-pll";
+ clocks = <&ps_clk>;
+ reg = <0x104 0x114>;
+ clock-output-names = "ddrpll";
+ };
+ iopll: iopll {
+ #clock-cells = <0>;
+ compatible = "xlnx,zynq-pll";
+ clocks = <&ps_clk>;
+ reg = <0x108 0x118>;
+ clock-output-names = "iopll";
+ };
+ uart_clk: uart_clk {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynq-periph-clock";
+ clocks = <&iopll &armpll &ddrpll>;
+ reg = <0x154>;
+ clock-output-names = "uart0_ref_clk",
+ "uart1_ref_clk";
+ };
+ cpu_clk: cpu_clk {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynq-cpu-clock";
+ clocks = <&iopll &armpll &ddrpll>;
+ reg = <0x120 0x1C4>;
+ clock-output-names = "cpu_6x4x",
+ "cpu_3x2x",
+ "cpu_2x",
+ "cpu_1x";
+ };
+ };
+ };
+
+ ttc0: ttc0@f8001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "xlnx,ttc";
+ reg = <0xF8001000 0x1000>;
+ clocks = <&cpu_clk 3>;
+ clock-names = "cpu_1x";
+ clock-ranges;
+
+ ttc0_0: ttc0.0 {
+ status = "disabled";
+ reg = <0>;
+ interrupts = <0 10 4>;
+ };
+ ttc0_1: ttc0.1 {
+ status = "disabled";
+ reg = <1>;
+ interrupts = <0 11 4>;
+ };
+ ttc0_2: ttc0.2 {
+ status = "disabled";
+ reg = <2>;
+ interrupts = <0 12 4>;
+ };
+ };
+
+ ttc1: ttc1@f8002000 {
+ #interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "xlnx,ttc";
+ reg = <0xF8002000 0x1000>;
+ clocks = <&cpu_clk 3>;
+ clock-names = "cpu_1x";
+ clock-ranges;
+
+ ttc1_0: ttc1.0 {
+ status = "disabled";
+ reg = <0>;
+ interrupts = <0 37 4>;
+ };
+ ttc1_1: ttc1.1 {
+ status = "disabled";
+ reg = <1>;
+ interrupts = <0 38 4>;
+ };
+ ttc1_2: ttc1.2 {
+ status = "disabled";
+ reg = <2>;
+ interrupts = <0 39 4>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts
deleted file mode 100644
index 574bc04..0000000
--- a/arch/arm/boot/dts/zynq-ep107.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/ {
- model = "Xilinx Zynq EP107";
- compatible = "xlnx,zynq-ep107";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
-
- memory {
- device_type = "memory";
- reg = <0x0 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk";
- linux,stdout-path = &uart0;
- };
-
- amba {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- intc: interrupt-controller@f8f01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- interrupt-controller;
- reg = <0xF8F01000 0x1000>,
- <0xF8F00100 0x100>;
- };
-
- L2: cache-controller {
- compatible = "arm,pl310-cache";
- reg = <0xF8F02000 0x1000>;
- arm,data-latency = <2 3 2>;
- arm,tag-latency = <2 3 2>;
- cache-unified;
- cache-level = <2>;
- };
-
- uart0: uart@e0000000 {
- compatible = "xlnx,xuartps";
- reg = <0xE0000000 0x1000>;
- interrupts = <0 27 4>;
- clock = <50000000>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
new file mode 100644
index 0000000..c772942
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2011 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZC702 Development Board";
+ compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS1,115200 earlyprintk";
+ };
+
+};
+
+&ps_clk {
+ clock-frequency = <33333330>;
+};
+
+&ttc0_0 {
+ status = "ok";
+ compatible = "xlnx,ttc-counter-clocksource";
+};
+
+&ttc0_1 {
+ status = "ok";
+ compatible = "xlnx,ttc-counter-clockevent";
+};
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 048aaca..7bf5351 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -61,6 +61,8 @@
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ENC28J60=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
@@ -158,6 +160,10 @@
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
CONFIG_PRINTK_TIME=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 250625d..231dca6 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -78,6 +78,7 @@
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y
CONFIG_AB8500_USB=y
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
index 0b65d79..0c4e17d 100644
--- a/arch/arm/include/debug/imx.S
+++ b/arch/arm/include/debug/imx.S
@@ -10,6 +10,20 @@
* published by the Free Software Foundation.
*
*/
+#define IMX6Q_UART1_BASE_ADDR 0x02020000
+#define IMX6Q_UART2_BASE_ADDR 0x021e8000
+#define IMX6Q_UART3_BASE_ADDR 0x021ec000
+#define IMX6Q_UART4_BASE_ADDR 0x021f0000
+#define IMX6Q_UART5_BASE_ADDR 0x021f4000
+
+/*
+ * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
+ * of IMX6Q_UART##n##_BASE_ADDR.
+ */
+#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR
+#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n)
+#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
+
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR 0x00206000
#elif defined (CONFIG_DEBUG_IMX25_UART)
@@ -22,10 +36,8 @@
#define UART_PADDR 0x73fbc000
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR 0x53fbc000
-#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
-#define UART_PADDR 0x021e8000
-#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
-#define UART_PADDR 0x021f0000
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR IMX6Q_DEBUG_UART_BASE
#endif
/*
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
index 5c5a95a..04a6c4e 100644
--- a/arch/arm/mach-davinci/Makefile.boot
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -11,5 +11,3 @@
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
endif
-
-dtb-$(CONFIG_MACH_DA8XX_DT) += da850-enbw-cmc.dtb da850-evm.dtb
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 070c7b6..91d5b6f 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -63,6 +63,7 @@
depends on ARCH_EXYNOS5
select S5P_PM if PM
select S5P_SLEEP if PM
+ select S5P_DEV_MFC
select SAMSUNG_DMADEV
help
Enable EXYNOS5250 SoC support
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 66135ee..b189881 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -52,7 +52,6 @@
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
-obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o
obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index fa8a134..efead60 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -576,6 +576,10 @@
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 15),
}, {
+ .name = "tmu_apbif",
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
.name = "keypad",
.enable = exynos4_clk_ip_perir_ctrl,
.ctrlbit = (1 << 16),
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index 4478757..7652f5d 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -196,6 +196,11 @@
return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
}
+static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
/* Core list of CMU_CPU side */
static struct clksrc_clk exynos5_clk_mout_apll = {
@@ -616,6 +621,11 @@
.enable = exynos5_clk_ip_peric_ctrl,
.ctrlbit = (1 << 24),
}, {
+ .name = "tmu_apbif",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peris_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
.name = "rtc",
.parent = &exynos5_clk_aclk_66.clk,
.enable = exynos5_clk_ip_peris_ctrl,
@@ -664,17 +674,22 @@
.ctrlbit = (1 << 25),
}, {
.name = "mfc",
- .devname = "s5p-mfc",
+ .devname = "s5p-mfc-v6",
.enable = exynos5_clk_ip_mfc_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "hdmi",
- .devname = "exynos4-hdmi",
+ .devname = "exynos5-hdmi",
.enable = exynos5_clk_ip_disp1_ctrl,
.ctrlbit = (1 << 6),
}, {
+ .name = "hdmiphy",
+ .devname = "exynos5-hdmi",
+ .enable = exynos5_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
.name = "mixer",
- .devname = "s5p-mixer",
+ .devname = "exynos5-mixer",
.enable = exynos5_clk_ip_disp1_ctrl,
.ctrlbit = (1 << 5),
}, {
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index e05f6cc..3f257e7 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -1020,11 +1020,14 @@
* platforms switch over to using the pinctrl driver, the wakeup
* interrupt support code here can be completely removed.
*/
+ static const struct of_device_id exynos_pinctrl_ids[] = {
+ { .compatible = "samsung,pinctrl-exynos4210", },
+ { .compatible = "samsung,pinctrl-exynos4x12", },
+ };
struct device_node *pctrl_np, *wkup_np;
- const char *pctrl_compat = "samsung,pinctrl-exynos4210";
const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
- for_each_compatible_node(pctrl_np, NULL, pctrl_compat) {
+ for_each_matching_node(pctrl_np, exynos_pinctrl_ids) {
if (of_device_is_available(pctrl_np)) {
wkup_np = of_find_compatible_node(pctrl_np, NULL,
wkup_compat);
diff --git a/arch/arm/mach-exynos/dev-drm.c b/arch/arm/mach-exynos/dev-drm.c
deleted file mode 100644
index 17c9c6e..0000000
--- a/arch/arm/mach-exynos/dev-drm.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos/dev-drm.c
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - core DRM device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-
-static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device exynos_device_drm = {
- .name = "exynos-drm",
- .dev = {
- .dma_mask = &exynos_drm_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index e0f0ae3..1f4dc35 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -136,6 +136,9 @@
#define EXYNOS4_IRQ_TSI IRQ_SPI(115)
#define EXYNOS4_IRQ_SATA IRQ_SPI(116)
+#define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4)
+#define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4)
+
#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 61b74e1..1df6abb 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -89,6 +89,8 @@
#define EXYNOS4_PA_TWD 0x10500600
#define EXYNOS4_PA_L2CC 0x10502000
+#define EXYNOS4_PA_TMU 0x100C0000
+
#define EXYNOS4_PA_MDMA0 0x10810000
#define EXYNOS4_PA_MDMA1 0x12850000
#define EXYNOS4_PA_S_MDMA1 0x12840000
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 6df99c0..92757ff 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -78,6 +78,8 @@
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
+ "exynos-tmu", NULL),
{},
};
@@ -95,6 +97,8 @@
static char const *exynos4_dt_compat[] __initdata = {
"samsung,exynos4210",
+ "samsung,exynos4212",
+ "samsung,exynos4412",
NULL
};
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index f1326be..929de76 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -12,6 +12,8 @@
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
#include <linux/serial_core.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -19,6 +21,7 @@
#include <plat/cpu.h>
#include <plat/regs-serial.h>
+#include <plat/mfc.h>
#include "common.h"
@@ -48,6 +51,20 @@
"s3c2440-i2c.0", NULL),
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
"s3c2440-i2c.1", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
+ "s3c2440-i2c.2", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
+ "s3c2440-i2c.3", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
+ "s3c2440-i2c.4", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
+ "s3c2440-i2c.5", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
+ "s3c2440-i2c.6", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
+ "s3c2440-i2c.7", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
+ "s3c2440-hdmiphy-i2c", NULL),
OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
"dw_mmc.0", NULL),
OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
@@ -62,6 +79,12 @@
"exynos4210-spi.1", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
"exynos4210-spi.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
+ "exynos5-sata", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
+ "exynos5-sata-phy", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
+ "exynos5-sata-phy-i2c", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
@@ -73,6 +96,13 @@
"exynos-gsc.2", NULL),
OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
"exynos-gsc.3", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
+ "exynos5-hdmi", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
+ "exynos5-mixer", NULL),
+ OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
+ OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
+ "exynos-tmu", NULL),
{},
};
@@ -108,6 +138,17 @@
NULL
};
+static void __init exynos5_reserve(void)
+{
+ struct s5p_mfc_dt_meminfo mfc_mem;
+
+ /* Reserve memory for MFC only if it's available */
+ mfc_mem.compatible = "samsung,mfc-v6";
+ if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+ s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+ mfc_mem.lsize);
+}
+
DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.init_irq = exynos5_init_irq,
@@ -119,4 +160,5 @@
.timer = &exynos4_timer,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
+ .reserve = exynos5_reserve,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 69359a0..27d4ed8 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1326,9 +1326,6 @@
&cam_vdda_fixed_rdev,
&cam_8m_12v_fixed_rdev,
&exynos4_bus_devfreq,
-#ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
-#endif
};
static void __init nuri_map_io(void)
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index c606080..e6f4191 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -711,9 +711,6 @@
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&s5p_device_mixer,
-#ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
-#endif
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index ddb9263..a1555a7 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -317,9 +317,6 @@
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
-#ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
-#endif
&samsung_device_keypad,
};
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 8dd6a1e..063cb94 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -300,9 +300,6 @@
&s5p_device_fimc_md,
&s5p_device_g2d,
&s5p_device_jpeg,
-#ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
-#endif
&exynos4_device_ac97,
&exynos4_device_i2s0,
&exynos4_device_ohci,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 2d6bc83..9e3340f 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -1080,9 +1080,6 @@
&s5p_device_onenand,
&s5p_device_fimd0,
&s5p_device_jpeg,
-#ifdef CONFIG_DRM_EXYNOS
- &exynos_device_drm,
-#endif
&s3c_device_usb_hsotg,
&s5p_device_mfc,
&s5p_device_mfc_l,
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index c0bc83a..9f1351d 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -19,6 +19,8 @@
#include <linux/pm_domain.h>
#include <linux/delay.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/sched.h>
#include <mach/regs-pmu.h>
#include <plat/devs.h>
@@ -83,12 +85,88 @@
}
#ifdef CONFIG_OF
+static void exynos_add_device_to_domain(struct exynos_pm_domain *pd,
+ struct device *dev)
+{
+ int ret;
+
+ dev_dbg(dev, "adding to power domain %s\n", pd->pd.name);
+
+ while (1) {
+ ret = pm_genpd_add_device(&pd->pd, dev);
+ if (ret != -EAGAIN)
+ break;
+ cond_resched();
+ }
+
+ pm_genpd_dev_need_restore(dev, true);
+}
+
+static void exynos_remove_device_from_domain(struct device *dev)
+{
+ struct generic_pm_domain *genpd = dev_to_genpd(dev);
+ int ret;
+
+ dev_dbg(dev, "removing from power domain %s\n", genpd->name);
+
+ while (1) {
+ ret = pm_genpd_remove_device(genpd, dev);
+ if (ret != -EAGAIN)
+ break;
+ cond_resched();
+ }
+}
+
+static void exynos_read_domain_from_dt(struct device *dev)
+{
+ struct platform_device *pd_pdev;
+ struct exynos_pm_domain *pd;
+ struct device_node *node;
+
+ node = of_parse_phandle(dev->of_node, "samsung,power-domain", 0);
+ if (!node)
+ return;
+ pd_pdev = of_find_device_by_node(node);
+ if (!pd_pdev)
+ return;
+ pd = platform_get_drvdata(pd_pdev);
+ exynos_add_device_to_domain(pd, dev);
+}
+
+static int exynos_pm_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct device *dev = data;
+
+ switch (event) {
+ case BUS_NOTIFY_BIND_DRIVER:
+ if (dev->of_node)
+ exynos_read_domain_from_dt(dev);
+
+ break;
+
+ case BUS_NOTIFY_UNBOUND_DRIVER:
+ exynos_remove_device_from_domain(dev);
+
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block platform_nb = {
+ .notifier_call = exynos_pm_notifier_call,
+};
+
static __init int exynos_pm_dt_parse_domains(void)
{
+ struct platform_device *pdev;
struct device_node *np;
for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
struct exynos_pm_domain *pd;
+ int on;
+
+ pdev = of_find_device_by_node(np);
pd = kzalloc(sizeof(*pd), GFP_KERNEL);
if (!pd) {
@@ -97,15 +175,22 @@
return -ENOMEM;
}
- if (of_get_property(np, "samsung,exynos4210-pd-off", NULL))
- pd->is_off = true;
- pd->name = np->name;
+ pd->pd.name = kstrdup(np->name, GFP_KERNEL);
+ pd->name = pd->pd.name;
pd->base = of_iomap(np, 0);
pd->pd.power_off = exynos_pd_power_off;
pd->pd.power_on = exynos_pd_power_on;
pd->pd.of_node = np;
- pm_genpd_init(&pd->pd, NULL, false);
+
+ platform_set_drvdata(pdev, pd);
+
+ on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+ pm_genpd_init(&pd->pd, NULL, !on);
}
+
+ bus_register_notifier(&platform_bus_type, &platform_nb);
+
return 0;
}
#else
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 4e24b8c..1ad0d76 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -272,6 +272,13 @@
endchoice
+config MACH_IMX25_DT
+ bool "Support i.MX25 platforms from device tree"
+ select SOC_IMX25
+ help
+ Include support for Freescale i.MX25 based platforms
+ using the device tree for discovery
+
comment "MX27 platforms:"
config MACH_MX27ADS
@@ -831,7 +838,14 @@
config SOC_IMX6Q
bool "i.MX6 Quad support"
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
+ select ARM_ERRATA_743622
+ select ARM_ERRATA_751472
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369 if SMP
+ select ARM_ERRATA_775420
select ARM_GIC
select COMMON_CLK
select CPU_V7
@@ -843,6 +857,10 @@
select MFD_SYSCON
select PINCTRL
select PINCTRL_IMX6Q
+ select PL310_ERRATA_588369 if CACHE_PL310
+ select PL310_ERRATA_727915 if CACHE_PL310
+ select PL310_ERRATA_769419 if CACHE_PL310
+ select PM_OPP if PM
help
This enables support for Freescale i.MX6 Quad processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index fe47b71..0634b31 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -50,6 +50,7 @@
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index bc88580..b197aa7 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -23,6 +23,9 @@
#include <linux/io.h>
#include <linux/clkdev.h>
#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include "clk.h"
#include "common.h"
@@ -55,6 +58,8 @@
#define ccm(x) (CRM_BASE + (x))
+static struct clk_onecell_data clk_data;
+
static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
static const char *per_sel_clks[] = { "ahb", "upll", };
@@ -64,24 +69,30 @@
per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
- csi_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, gpt_ipg_per, i2c_ipg_per,
- lcdc_ipg_per, nfc_ipg_per, ssi1_ipg_per, ssi2_ipg_per, uart_ipg_per,
- csi_ahb, esdhc1_ahb, esdhc2_ahb, fec_ahb, lcdc_ahb, sdma_ahb,
- usbotg_ahb, can1_ipg, can2_ipg, csi_ipg, cspi1_ipg, cspi2_ipg,
- cspi3_ipg, dryice_ipg, esdhc1_ipg, esdhc2_ipg, fec_ipg, iim_ipg,
- kpp_ipg, lcdc_ipg, pwm1_ipg, pwm2_ipg, pwm3_ipg, pwm4_ipg, sdma_ipg,
- ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg,
- uart4_ipg, uart5_ipg, wdt_ipg, clk_max
+ csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per,
+ gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per,
+ pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per,
+ uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb,
+ esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb,
+ reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg, csi_ipg,
+ cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg,
+ reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9,
+ gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12,
+ iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg,
+ pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg,
+ sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg,
+ uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17,
+ wdt_ipg, clk_max
};
static struct clk *clk[clk_max];
-int __init mx25_clocks_init(void)
+static int __init __mx25_clocks_init(unsigned long osc_rate)
{
int i;
clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[osc] = imx_clk_fixed("osc", 24000000);
+ clk[osc] = imx_clk_fixed("osc", osc_rate);
clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL));
clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL));
clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
@@ -123,22 +134,36 @@
clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
+ clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0), 1);
+ clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0), 2);
clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3);
clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7);
clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8);
+ clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0), 9);
+ clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0), 10);
+ clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0), 11);
+ clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0), 12);
clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
+ clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16);
+ /* CCM_CGCR0(17): reserved */
clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
+ clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19);
+ clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20);
clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
+ clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25);
clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
+ clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27);
clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
+ /* CCM_CGCR0(29-31): reserved */
+ /* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */
clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2);
clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3);
clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4);
@@ -146,17 +171,41 @@
clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6);
clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7);
clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8);
+ clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1), 9);
+ clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1), 10);
+ clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1), 11);
+ /* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */
clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
+ /* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */
+ /* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */
+ /* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */
+ clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19);
+ clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20);
+ clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21);
+ clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22);
+ /* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */
+ /* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */
+ /* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */
clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
+ /* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */
+ /* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */
clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
+ /* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */
clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0);
clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1);
clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2);
+ clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2), 3);
+ /* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */
+ clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2), 5);
clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6);
+ clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2), 7);
+ clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2), 8);
+ clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2), 9);
+ clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2), 10);
clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
@@ -165,6 +214,7 @@
clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
+ /* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */
clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
for (i = 0; i < ARRAY_SIZE(clk); i++)
@@ -172,6 +222,18 @@
pr_err("i.MX25 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
+ clk_prepare_enable(clk[emi_ahb]);
+
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+
+ return 0;
+}
+
+int __init mx25_clocks_init(void)
+{
+ __mx25_clocks_init(24000000);
+
/* i.mx25 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
@@ -183,8 +245,6 @@
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
- clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
@@ -242,5 +302,40 @@
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
+
+ return 0;
+}
+
+int __init mx25_clocks_init_dt(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int irq;
+ unsigned long osc_rate = 24000000;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-osc"))
+ osc_rate = rate;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm");
+ clk_data.clks = clk;
+ clk_data.clk_num = ARRAY_SIZE(clk);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ __mx25_clocks_init(osc_rate);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+
+ mxc_timer_init(base, irq);
+
return 0;
}
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4484769..7f2c10c 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -424,6 +424,7 @@
clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
+ clk_register_clkdev(clk[arm], NULL, "cpu0");
/*
* The gpmi needs 100MHz frequency in the EDO/Sync mode,
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index ef8db6b..7191ab4 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -66,6 +66,7 @@
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx25_clocks_init_dt(void);
extern int mx27_clocks_init_dt(void);
extern int mx31_clocks_init_dt(void);
extern int mx51_clocks_init_dt(void);
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
new file mode 100644
index 0000000..e17dfbc
--- /dev/null
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include "common.h"
+#include "mx25.h"
+
+static void __init imx25_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void __init imx25_timer_init(void)
+{
+ mx25_clocks_init_dt();
+}
+
+static struct sys_timer imx25_timer = {
+ .init = imx25_timer_init,
+};
+
+static const char * const imx25_dt_board_compat[] __initconst = {
+ "fsl,imx25",
+ NULL
+};
+
+DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
+ .map_io = mx25_map_io,
+ .init_early = imx25_init_early,
+ .init_irq = mx25_init_irq,
+ .handle_irq = imx25_handle_irq,
+ .timer = &imx25_timer,
+ .init_machine = imx25_dt_init,
+ .dt_compat = imx25_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index 5f15103..2fdc9bf 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -17,17 +17,25 @@
#include "hardware.h"
+#define IMX6Q_UART1_BASE_ADDR 0x02020000
+#define IMX6Q_UART2_BASE_ADDR 0x021e8000
+#define IMX6Q_UART3_BASE_ADDR 0x021ec000
+#define IMX6Q_UART4_BASE_ADDR 0x021f0000
+#define IMX6Q_UART5_BASE_ADDR 0x021f4000
+
+/*
+ * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
+ * of IMX6Q_UART##n##_BASE_ADDR.
+ */
+#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR
+#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n)
+#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
+
static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART2
- .virtual = MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR),
- .pfn = __phys_to_pfn(MX6Q_UART2_BASE_ADDR),
- .length = MX6Q_UART2_SIZE,
- .type = MT_DEVICE,
-#endif
-#ifdef CONFIG_DEBUG_IMX6Q_UART4
- .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
- .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
- .length = MX6Q_UART4_SIZE,
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+ .virtual = IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE),
+ .pfn = __phys_to_pfn(IMX6Q_DEBUG_UART_BASE),
+ .length = 0x4000,
.type = MT_DEVICE,
#endif
};
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index cce33e4..4eb1b3a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -38,6 +38,40 @@
#include "cpuidle.h"
#include "hardware.h"
+#define IMX6Q_ANALOG_DIGPROG 0x260
+
+static int imx6q_revision(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+ static u32 rev;
+
+ if (!rev) {
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ if (!np)
+ return IMX_CHIP_REVISION_UNKNOWN;
+ base = of_iomap(np, 0);
+ if (!base) {
+ of_node_put(np);
+ return IMX_CHIP_REVISION_UNKNOWN;
+ }
+ rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
+ iounmap(base);
+ of_node_put(np);
+ }
+
+ switch (rev & 0xff) {
+ case 0:
+ return IMX_CHIP_REVISION_1_0;
+ case 1:
+ return IMX_CHIP_REVISION_1_1;
+ case 2:
+ return IMX_CHIP_REVISION_1_2;
+ default:
+ return IMX_CHIP_REVISION_UNKNOWN;
+ }
+}
+
void imx6q_restart(char mode, const char *cmd)
{
struct device_node *np;
@@ -204,6 +238,7 @@
{
mx6q_clocks_init();
twd_local_timer_of_register();
+ imx_print_silicon_rev("i.MX6Q", imx6q_revision());
}
static struct sys_timer imx6q_timer = {
diff --git a/arch/arm/mach-imx/mx6q.h b/arch/arm/mach-imx/mx6q.h
index f7e7dba..19d3f54 100644
--- a/arch/arm/mach-imx/mx6q.h
+++ b/arch/arm/mach-imx/mx6q.h
@@ -27,9 +27,5 @@
#define MX6Q_CCM_SIZE 0x4000
#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
#define MX6Q_ANATOP_SIZE 0x1000
-#define MX6Q_UART2_BASE_ADDR 0x021e8000
-#define MX6Q_UART2_SIZE 0x4000
-#define MX6Q_UART4_BASE_ADDR 0x021f0000
-#define MX6Q_UART4_SIZE 0x4000
#endif /* __MACH_MX6Q_H__ */
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index d018ad4..503d7dd 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -46,6 +46,11 @@
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
+ select POWER_SUPPLY
+ select POWER_RESET
+ select POWER_RESET_GPIO
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
select USE_OF
help
Say 'Y' here if you want your kernel to support the
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 43d16d6..a1aa87f 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -17,51 +17,11 @@
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data dnskw_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int dnskw_mpp_config[] __initdata = {
- MPP13_UART1_TXD, /* Custom ... */
- MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */
- MPP20_SATA1_ACTn, /* LED: White Right HDD */
- MPP21_SATA0_ACTn, /* LED: White Left HDD */
- MPP24_GPIO,
- MPP25_GPIO,
- MPP26_GPIO, /* LED: Power */
- MPP27_GPIO, /* LED: Red Right HDD */
- MPP28_GPIO, /* LED: Red Left HDD */
- MPP29_GPIO, /* LED: Red USB (DNS-325 only) */
- MPP30_GPIO,
- MPP31_GPIO,
- MPP32_GPIO,
- MPP33_GPO,
- MPP34_GPIO, /* Button: Front power */
- MPP35_GPIO, /* LED: Red USB (DNS-320 only) */
- MPP36_GPIO, /* Power: Turn off board */
- MPP37_GPIO, /* Power: Turn back on after power failure */
- MPP38_GPIO,
- MPP39_GPIO, /* Power: SATA0 */
- MPP40_GPIO, /* Power: SATA1 */
- MPP41_GPIO, /* SATA0 present */
- MPP42_GPIO, /* SATA1 present */
- MPP43_GPIO, /* LED: White USB */
- MPP44_GPIO, /* Fan: Tachometer Pin */
- MPP45_GPIO, /* Fan: high speed */
- MPP46_GPIO, /* Fan: low speed */
- MPP47_GPIO, /* Button: Back unmount */
- MPP48_GPIO, /* Button: Back reset */
- MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
- 0
-};
-
-static void dnskw_power_off(void)
-{
- gpio_set_value(36, 1);
-}
-
/* Register any GPIO for output and set the value */
static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
{
@@ -76,22 +36,8 @@
void __init dnskw_init(void)
{
- kirkwood_mpp_conf(dnskw_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
- /* Register power-off GPIO. */
- if (gpio_request(36, "dnskw:power:off") == 0
- && gpio_direction_output(36, 0) == 0)
- pm_power_off = dnskw_power_off;
- else
- pr_err("dnskw: failed to configure power-off GPIO\n");
-
- /* Ensure power is supplied to both HDDs */
- dnskw_gpio_register(39, "dnskw:power:sata0", 1);
- dnskw_gpio_register(40, "dnskw:power:sata1", 1);
-
/* Set NAS to turn back on after a power failure */
dnskw_gpio_register(37, "dnskw:power:recover", 1);
}
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
index 6912882..d7196db 100644
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -17,32 +17,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data dockstar_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
-static unsigned int dockstar_mpp_config[] __initdata = {
- MPP29_GPIO, /* USB Power Enable */
- MPP46_GPIO, /* LED green */
- MPP47_GPIO, /* LED orange */
- 0
-};
-
void __init dockstar_dt_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(dockstar_mpp_config);
-
- if (gpio_request(29, "USB Power Enable") != 0 ||
- gpio_direction_output(29, 1) != 0)
- pr_err("can't setup GPIO 29 (USB Power Enable)\n");
- kirkwood_ehci_init();
-
kirkwood_ge00_init(&dockstar_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 8a8ebe0..08248e2 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -17,7 +17,6 @@
#include <linux/gpio.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
@@ -31,25 +30,11 @@
/* unfortunately the CD signal has not been connected */
};
-static unsigned int dreamplug_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP47_GPIO, /* Bluetooth LED */
- MPP48_GPIO, /* Wifi LED */
- MPP49_GPIO, /* Wifi AP LED */
- 0
-};
-
void __init dreamplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(dreamplug_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 5dcd0d6..9db979a 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -19,40 +19,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
-static unsigned int goflexnet_mpp_config[] __initdata = {
- MPP29_GPIO, /* USB Power Enable */
- MPP47_GPIO, /* LED Orange */
- MPP46_GPIO, /* LED Green */
- MPP45_GPIO, /* LED Left Capacity 3 */
- MPP44_GPIO, /* LED Left Capacity 2 */
- MPP43_GPIO, /* LED Left Capacity 1 */
- MPP42_GPIO, /* LED Left Capacity 0 */
- MPP41_GPIO, /* LED Right Capacity 3 */
- MPP40_GPIO, /* LED Right Capacity 2 */
- MPP39_GPIO, /* LED Right Capacity 1 */
- MPP38_GPIO, /* LED Right Capacity 0 */
- 0
-};
-
void __init goflexnet_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(goflexnet_mpp_config);
-
- if (gpio_request(29, "USB Power Enable") != 0 ||
- gpio_direction_output(29, 1) != 0)
- pr_err("can't setup GPIO 29 (USB Power Enable)\n");
- kirkwood_ehci_init();
-
kirkwood_ge00_init(&goflexnet_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 6d3a564..9f6f496 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -14,52 +14,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
#include <linux/input.h>
#include "common.h"
-#include "mpp.h"
-
-#define IB62X0_GPIO_POWER_OFF 24
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int ib62x0_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP22_GPIO, /* OS LED red */
- MPP24_GPIO, /* Power off device */
- MPP25_GPIO, /* OS LED green */
- MPP27_GPIO, /* USB transfer LED */
- MPP28_GPIO, /* Reset button */
- MPP29_GPIO, /* USB Copy button */
- 0
-};
-
-static void ib62x0_power_off(void)
-{
- gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
-}
-
void __init ib62x0_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(ib62x0_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
- if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
- gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = ib62x0_power_off;
- else
- pr_err("board-ib62x0: failed to configure power-off GPIO\n");
}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 24f5aa7..c8ebde4 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -13,31 +13,13 @@
#include <linux/of.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data iconnect_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
-static unsigned int iconnect_mpp_config[] __initdata = {
- MPP12_GPIO,
- MPP35_GPIO,
- MPP41_GPIO,
- MPP42_GPIO,
- MPP43_GPIO,
- MPP44_GPIO,
- MPP45_GPIO,
- MPP46_GPIO,
- MPP47_GPIO,
- MPP48_GPIO,
- 0
-};
-
void __init iconnect_init(void)
{
- kirkwood_mpp_conf(iconnect_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index e4ed62c..f655b26 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -13,7 +13,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
@@ -21,35 +20,10 @@
.duplex = DUPLEX_FULL,
};
-static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
- MPP12_GPIO, /* Reset Button */
- MPP14_GPIO, /* Power Button */
- MPP15_GPIO, /* Backup LED (blue) */
- MPP16_GPIO, /* Power LED (white) */
- MPP35_GPIO, /* OTB Button */
- MPP36_GPIO, /* Rebuild LED (white) */
- MPP37_GPIO, /* Health LED (red) */
- MPP38_GPIO, /* SATA LED brightness control 1 */
- MPP39_GPIO, /* SATA LED brightness control 2 */
- MPP40_GPIO, /* Backup LED brightness control 1 */
- MPP41_GPIO, /* Backup LED brightness control 2 */
- MPP42_GPIO, /* Power LED brightness control 1 */
- MPP43_GPIO, /* Power LED brightness control 2 */
- MPP44_GPIO, /* Health LED brightness control 1 */
- MPP45_GPIO, /* Health LED brightness control 2 */
- MPP46_GPIO, /* Rebuild LED brightness control 1 */
- MPP47_GPIO, /* Rebuild LED brightness control 2 */
- 0
-};
-
void __init iomega_ix2_200_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
-
- kirkwood_ehci_init();
-
kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
index f7d3283..44e4605 100644
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -18,27 +18,15 @@
#include <linux/clk.h>
#include <linux/clk-private.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
-static unsigned int km_kirkwood_mpp_config[] __initdata = {
- MPP8_GPIO, /* I2C SDA */
- MPP9_GPIO, /* I2C SCL */
- 0
-};
-
void __init km_kirkwood_init(void)
{
struct clk *sata_clk;
/*
- * Basic setup. Needs to be called early.
- */
- kirkwood_mpp_conf(km_kirkwood_mpp_config);
-
- /*
* Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
* SATA bits (14-15) of the Clock Gating Control Register. Since these
* devices are also not present in this variant, their clocks get
@@ -52,6 +40,5 @@
if (!IS_ERR(sata_clk))
sata_clk->flags |= CLK_IGNORE_UNUSED;
- kirkwood_ehci_init();
kirkwood_ge00_init(&km_kirkwood_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 7e18cad..4ec8b7a 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -15,9 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data lsxl_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
@@ -27,23 +25,6 @@
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int lsxl_mpp_config[] __initdata = {
- MPP10_GPO, /* HDD Power Enable */
- MPP11_GPIO, /* USB Vbus Enable */
- MPP18_GPO, /* FAN High Enable# */
- MPP19_GPO, /* FAN Low Enable# */
- MPP36_GPIO, /* Function Blue LED */
- MPP37_GPIO, /* Alarm LED */
- MPP38_GPIO, /* Info LED */
- MPP39_GPIO, /* Power LED */
- MPP40_GPIO, /* Fan Lock */
- MPP41_GPIO, /* Function Button */
- MPP42_GPIO, /* Power Switch */
- MPP43_GPIO, /* Power Auto Switch */
- MPP48_GPIO, /* Function Red LED */
- 0
-};
-
/*
* On the LS-XHL/LS-CHLv2, the shutdown process is following:
* - Userland monitors key events until the power switch goes to off position
@@ -57,21 +38,12 @@
kirkwood_restart('h', NULL);
}
-#define LSXL_GPIO_HDD_POWER 10
-#define LSXL_GPIO_USB_POWER 11
-
void __init lsxl_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(lsxl_mpp_config);
- /* usb and sata power on */
- gpio_set_value(LSXL_GPIO_USB_POWER, 1);
- gpio_set_value(LSXL_GPIO_HDD_POWER, 1);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&lsxl_ge00_data);
kirkwood_ge01_init(&lsxl_ge01_data);
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index e78a227..56bfe5a 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -24,52 +24,16 @@
.phy_addr = MV643XX_ETH_PHY_ADDR(2),
};
-static unsigned int mplcec4_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Status LED Green High Active */
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_SD_CLK,
- MPP13_SD_CMD, /* Alt UART1_TXD */
- MPP14_SD_D0, /* Alt UART1_RXD */
- MPP15_SD_D1,
- MPP16_SD_D2,
- MPP17_SD_D3,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP28_GPIO, /* Input SYS_POR_DET (active High) */
- MPP29_GPIO, /* Input SYS_RTC_INT (active High) */
- MPP34_SATA1_ACTn,
- MPP35_SATA0_ACTn,
- MPP40_GPIO, /* LED User1 orange */
- MPP41_GPIO, /* LED User1 green */
- MPP44_GPIO, /* LED User0 orange */
- MPP45_GPIO, /* LED User0 green */
- MPP46_GPIO, /* Status LED Yellow High Active */
- MPP47_GPIO, /* SD_CD# (in/IRQ)*/
- 0
-};
-
-
static struct mvsdio_platform_data mplcec4_mvsdio_data = {
.gpio_card_detect = 47, /* MPP47 used as SD card detect */
};
-
void __init mplcec4_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(mplcec4_mpp_config);
- kirkwood_ehci_init();
kirkwood_ge00_init(&mplcec4_ge00_data);
kirkwood_ge01_init(&mplcec4_ge01_data);
kirkwood_sdio_init(&mplcec4_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 78596c4..8821720 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -73,7 +73,6 @@
*/
kirkwood_mpp_conf(ns2_mpp_config);
- kirkwood_ehci_init();
if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index 027ce83..f58d2e1 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -85,10 +85,6 @@
nsa310_gpio_init();
- /* this can be removed once the mainline kirkwood.dtsi gets
- * the ehci configuration by default */
- kirkwood_ehci_init();
-
kirkwood_pcie_id(&dev, &rev);
i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
index e807e8c..815fc64 100644
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -55,8 +55,8 @@
MPP38_GPIO, /* INIT */
MPP39_GPIO, /* USB OC */
MPP41_GPIO, /* LED: Red */
- MPP42_GPIO, /* LED: Yellow */
- MPP43_GPIO, /* LED: Green */
+ MPP42_GPIO, /* LED: Green */
+ MPP43_GPIO, /* LED: Yellow */
0,
};
@@ -66,6 +66,5 @@
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(openblocks_a6_mpp_config);
- kirkwood_ehci_init();
kirkwood_ge00_init(&openblocks_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index f3bfeda..acb0187 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -23,47 +23,21 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
#include "tsx1x-common.h"
static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_SATA1_ACTn,
- MPP5_SATA0_ACTn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_UART1_TXD, /* PIC controller */
- MPP14_UART1_RXD, /* PIC controller */
- MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
- MPP16_GPIO, /* Reset button (on devices with 88F6281) */
- MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
- MPP37_GPIO, /* Reset button (on devices with 88F6282) */
- MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
- MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
- 0
-};
-
void __init qnap_dt_ts219_init(void)
{
u32 dev, rev;
- kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6282_DEV_ID)
qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
- kirkwood_ehci_init();
pm_power_off = qnap_tsx1x_power_off;
}
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index e2ec9d8..15e69fc 100644
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -76,7 +76,6 @@
/* SATA0 power enable */
gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
- kirkwood_ehci_init();
kirkwood_ge00_init(&topkick_ge00_data);
kirkwood_sdio_init(&topkick_mvsdio_data);
}
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 4748ec5..9807037 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -100,6 +100,25 @@
},
};
+static struct fb_videomode apf28dev_video_modes[] = {
+ {
+ .name = "LW700",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30303, /* picosecond */
+ .left_margin = 96,
+ .right_margin = 96, /* at least 3 & 1 */
+ .upper_margin = 0x14,
+ .lower_margin = 0x15,
+ .hsync_len = 64,
+ .vsync_len = 4,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
+ FB_SYNC_DATA_ENABLE_HIGH_ACT |
+ FB_SYNC_DOTCLK_FAILING_ACT,
+ },
+};
+
static struct mxsfb_platform_data mxsfb_pdata __initdata;
/*
@@ -160,6 +179,7 @@
enum mac_oui {
OUI_FSL,
OUI_DENX,
+ OUI_CRYSTALFONTZ,
};
static void __init update_fec_mac_prop(enum mac_oui oui)
@@ -175,8 +195,12 @@
np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
if (!np)
return;
+
from = np;
+ if (of_get_property(np, "local-mac-address", NULL))
+ continue;
+
newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
if (!newmac)
return;
@@ -205,6 +229,11 @@
macaddr[1] = 0xe5;
macaddr[2] = 0x4e;
break;
+ case OUI_CRYSTALFONTZ:
+ macaddr[0] = 0x58;
+ macaddr[1] = 0xb9;
+ macaddr[2] = 0xe1;
+ break;
}
val = ocotp[i];
macaddr[3] = (val >> 16) & 0xff;
@@ -261,6 +290,11 @@
mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
+static void __init sc_sps1_init(void)
+{
+ enable_clk_enet_out();
+}
+
static int apx4devkit_phy_fixup(struct phy_device *phy)
{
phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
@@ -355,6 +389,22 @@
pinctrl_put(pctl);
}
+static void __init cfa10049_init(void)
+{
+ enable_clk_enet_out();
+ update_fec_mac_prop(OUI_CRYSTALFONTZ);
+}
+
+static void __init apf28_init(void)
+{
+ enable_clk_enet_out();
+
+ mxsfb_pdata.mode_list = apf28dev_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
+ mxsfb_pdata.default_bpp = 16;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
+}
+
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
@@ -365,6 +415,12 @@
m28evk_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
+ else if (of_machine_is_compatible("crystalfontz,cfa10049"))
+ cfa10049_init();
+ else if (of_machine_is_compatible("armadeus,imx28-apf28"))
+ apf28_init();
+ else if (of_machine_is_compatible("schulercontrol,imx28-sps1"))
+ sc_sps1_init();
of_platform_populate(NULL, of_default_bus_match_table,
mxs_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 7c37926..856f4c7 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -29,6 +29,7 @@
#include <linux/of_irq.h>
#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
#include <mach/mxs.h>
#include <mach/common.h>
@@ -233,15 +234,22 @@
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static u32 notrace mxs_read_sched_clock_v2(void)
+{
+ return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
+}
+
static int __init mxs_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
if (timrot_is_v1())
clocksource_register_hz(&clocksource_mxs, c);
- else
+ else {
clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
"mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
+ setup_sched_clock(mxs_read_sched_clock_v2, 32, c);
+ }
return 0;
}
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index 33631c9..bde91a5 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -149,15 +149,6 @@
},
};
-/* Platform device for Ux500-PCM */
-static struct platform_device ux500_pcm = {
- .name = "ux500-pcm",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
-};
-
struct msp_i2s_platform_data msp2_platform_data = {
.id = MSP_I2S_2,
.msp_i2s_dma_rx = &msp2_dma_rx,
@@ -185,10 +176,3 @@
db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
&msp3_platform_data);
}
-
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_audio_init(struct device *parent)
-{
- pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
- platform_device_register(&ux500_pcm);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
index 8c97977..564f57d 100644
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ b/arch/arm/mach-ux500/board-mop500-stuib.c
@@ -162,18 +162,6 @@
.y_flip = true,
};
-static struct bu21013_platform_device tsc_plat2_device = {
- .cs_en = bu21013_gpio_board_init,
- .cs_dis = bu21013_gpio_board_exit,
- .irq_read_val = bu21013_read_pin_val,
- .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
- .touch_x_max = TOUCH_XMAX,
- .touch_y_max = TOUCH_YMAX,
- .ext_clk = false,
- .x_flip = false,
- .y_flip = true,
-};
-
static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
{
I2C_BOARD_INFO("bu21013_tp", 0x5C),
@@ -181,21 +169,17 @@
},
{
I2C_BOARD_INFO("bu21013_tp", 0x5D),
- .platform_data = &tsc_plat2_device,
+ .platform_data = &tsc_plat_device,
},
};
void __init mop500_stuib_init(void)
{
- if (machine_is_hrefv60()) {
+ if (machine_is_hrefv60())
tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
- tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
- } else {
+ else
tsc_plat_device.cs_pin = GPIO_BU21013_CS;
- tsc_plat2_device.cs_pin = GPIO_BU21013_CS;
-
- }
mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
ARRAY_SIZE(mop500_i2c0_devices_stuib));
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index e6ad1614..5b70212 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -33,8 +33,6 @@
#include <linux/smsc911x.h>
#include <linux/gpio_keys.h>
#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/pinctrl-nomadik.h>
@@ -525,7 +523,7 @@
};
#endif
-static struct pl022_ssp_controller ssp0_plat = {
+struct pl022_ssp_controller ssp0_plat = {
.bus_id = 0,
#ifdef CONFIG_STE_DMA40
.enable_dma = 1,
@@ -602,7 +600,7 @@
};
#endif
-static struct amba_pl011_data uart0_plat = {
+struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
@@ -610,7 +608,7 @@
#endif
};
-static struct amba_pl011_data uart1_plat = {
+struct amba_pl011_data uart1_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart1_dma_cfg_rx,
@@ -618,7 +616,7 @@
#endif
};
-static struct amba_pl011_data uart2_plat = {
+struct amba_pl011_data uart2_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart2_dma_cfg_rx,
@@ -681,8 +679,6 @@
/* This board has full regulator constraints */
regulator_has_full_constraints();
-
- mop500_uib_init();
}
static void __init snowball_init_machine(void)
@@ -747,8 +743,6 @@
/* This board has full regulator constraints */
regulator_has_full_constraints();
-
- mop500_uib_init();
}
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
@@ -794,135 +788,5 @@
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = snowball_init_machine,
- .init_late = ux500_init_late,
+ .init_late = NULL,
MACHINE_END
-
-#ifdef CONFIG_MACH_UX500_DT
-
-struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
- /* Requires call-back bindings. */
- OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
- /* Requires DMA and call-back bindings. */
- OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
- OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
- /* Requires DMA bindings. */
- OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
- OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
- /* Requires clock name bindings. */
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
- OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
- OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
- /* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
- /* Requires clock name and DMA bindings. */
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
- "ux500-msp-i2s.0", &msp0_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
- "ux500-msp-i2s.1", &msp1_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
- "ux500-msp-i2s.2", &msp2_platform_data),
- OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
- "ux500-msp-i2s.3", &msp3_platform_data),
- {},
-};
-
-static const struct of_device_id u8500_local_bus_nodes[] = {
- /* only create devices below soc node */
- { .compatible = "stericsson,db8500", },
- { .compatible = "stericsson,db8500-prcmu", },
- { .compatible = "simple-bus"},
- { },
-};
-
-static void __init u8500_init_machine(void)
-{
- struct device *parent = NULL;
- int i2c0_devs;
- int i;
-
- /* Pinmaps must be in place before devices register */
- if (of_machine_is_compatible("st-ericsson,mop500"))
- mop500_pinmaps_init();
- else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
- snowball_pinmaps_init();
- else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
- hrefv60_pinmaps_init();
-
- parent = u8500_of_init_devices();
-
- for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
- mop500_platform_devs[i]->dev.parent = parent;
-
- /* automatically probe child nodes of db8500 device */
- of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
-
- if (of_machine_is_compatible("st-ericsson,mop500")) {
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
-
- mop500_sdi_init(parent);
- mop500_audio_init(parent);
- i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
- i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
- i2c_register_board_info(2, mop500_i2c2_devices,
- ARRAY_SIZE(mop500_i2c2_devices));
-
- mop500_uib_init();
-
- } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
- mop500_of_audio_init(parent);
- } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
- /*
- * The HREFv60 board removed a GPIO expander and routed
- * all these GPIO pins to the internal GPIO controller
- * instead.
- */
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
-
- mop500_uib_init();
- }
-
- /* This board has full regulator constraints */
- regulator_has_full_constraints();
-}
-
-static const char * u8500_dt_board_compat[] = {
- "calaosystems,snowball-a9500",
- "st-ericsson,hrefv60+",
- "st-ericsson,u8500",
- "st-ericsson,mop500",
- NULL,
-};
-
-
-DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
- .smp = smp_ops(ux500_smp_ops),
- .map_io = u8500_map_io,
- .init_irq = ux500_init_irq,
- /* we re-use nomadik timer here */
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
- .init_machine = u8500_init_machine,
- .init_late = ux500_init_late,
- .dt_compat = u8500_dt_board_compat,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index aca39a6..eaa605f 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -89,6 +89,10 @@
extern struct msp_i2s_platform_data msp2_platform_data;
extern struct msp_i2s_platform_data msp3_platform_data;
extern struct arm_pmu_platdata db8500_pmu_platdata;
+extern struct amba_pl011_data uart0_plat;
+extern struct amba_pl011_data uart1_plat;
+extern struct amba_pl011_data uart2_plat;
+extern struct pl022_ssp_controller ssp0_plat;
extern void mop500_sdi_init(struct device *parent);
extern void snowball_sdi_init(struct device *parent);
@@ -100,14 +104,8 @@
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_audio_init(struct device *parent);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n);
-
-/* TODO: Once all pieces are DT:ed, remove completely. */
-struct device * __init u8500_of_init_devices(void);
-
#endif
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 5c5ad70..93442fc 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -17,12 +17,16 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
-#include <linux/platform_data/usb-musb-ux500.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/machine.h>
#include <linux/random.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
@@ -30,6 +34,7 @@
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
+#include "board-mop500.h"
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
@@ -227,12 +232,12 @@
return parent;
}
-/* TODO: Once all pieces are DT:ed, remove completely. */
-struct device * __init u8500_of_init_devices(void)
-{
- struct device *parent;
+#ifdef CONFIG_MACH_UX500_DT
- parent = db8500_soc_device_init();
+/* TODO: Once all pieces are DT:ed, remove completely. */
+static struct device * __init u8500_of_init_devices(void)
+{
+ struct device *parent = db8500_soc_device_init();
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
@@ -248,3 +253,95 @@
return parent;
}
+
+static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+ /* Requires call-back bindings. */
+ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
+ /* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
+ /* Requires clock name bindings. */
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
+ OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+ /* Requires clock name and DMA bindings. */
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+ "ux500-msp-i2s.0", &msp0_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+ "ux500-msp-i2s.1", &msp1_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+ "ux500-msp-i2s.2", &msp2_platform_data),
+ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+ "ux500-msp-i2s.3", &msp3_platform_data),
+ {},
+};
+
+static const struct of_device_id u8500_local_bus_nodes[] = {
+ /* only create devices below soc node */
+ { .compatible = "stericsson,db8500", },
+ { .compatible = "stericsson,db8500-prcmu", },
+ { .compatible = "simple-bus"},
+ { },
+};
+
+static void __init u8500_init_machine(void)
+{
+ struct device *parent = NULL;
+
+ /* Pinmaps must be in place before devices register */
+ if (of_machine_is_compatible("st-ericsson,mop500"))
+ mop500_pinmaps_init();
+ else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+ snowball_pinmaps_init();
+ else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+ hrefv60_pinmaps_init();
+ else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
+ /* TODO: Add pinmaps for ccu9540 board. */
+
+ /* TODO: Export SoC, USB, cpu-freq and DMA40 */
+ parent = u8500_of_init_devices();
+
+ /* automatically probe child nodes of db8500 device */
+ of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
+}
+
+static const char * stericsson_dt_platform_compat[] = {
+ "st-ericsson,u8500",
+ "st-ericsson,u8540",
+ "st-ericsson,u9500",
+ "st-ericsson,u9540",
+ NULL,
+};
+
+DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
+ .smp = smp_ops(ux500_smp_ops),
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = u8500_init_machine,
+ .init_late = NULL,
+ .dt_compat = stericsson_dt_platform_compat,
+MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 1f3fbc2..721e7b4 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -26,6 +26,8 @@
#include <mach/setup.h>
#include <mach/devices.h>
+#include "board-mop500.h"
+
void __iomem *_PRCMU_BASE;
/*
@@ -82,6 +84,7 @@
void __init ux500_init_late(void)
{
+ mop500_uib_init();
}
static const char * __init ux500_get_machine(void)
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index ba8d14f..79bf5fb 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -19,12 +19,15 @@
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/clk/zynq.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/hardware/gic.h>
@@ -84,15 +87,36 @@
#ifdef CONFIG_DEBUG_LL
{
- .virtual = UART0_VIRT,
- .pfn = __phys_to_pfn(UART0_PHYS),
- .length = UART0_SIZE,
+ .virtual = LL_UART_VADDR,
+ .pfn = __phys_to_pfn(LL_UART_PADDR),
+ .length = UART_SIZE,
.type = MT_DEVICE,
},
#endif
};
+static void __init xilinx_zynq_timer_init(void)
+{
+ struct device_node *np;
+ void __iomem *slcr;
+
+ np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
+ slcr = of_iomap(np, 0);
+ WARN_ON(!slcr);
+
+ xilinx_zynq_clocks_init(slcr);
+
+ xttcpss_timer_init();
+}
+
+/*
+ * Instantiate and initialize the system timer structure
+ */
+static struct sys_timer xttcpss_sys_timer = {
+ .init = xilinx_zynq_timer_init,
+};
+
/**
* xilinx_map_io() - Create memory mappings needed for early I/O.
*/
@@ -102,7 +126,8 @@
}
static const char *xilinx_dt_match[] = {
- "xlnx,zynq-ep107",
+ "xlnx,zynq-zc702",
+ "xlnx,zynq-7000",
NULL
};
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index a009644..954b91c 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,8 +17,6 @@
#ifndef __MACH_ZYNQ_COMMON_H__
#define __MACH_ZYNQ_COMMON_H__
-#include <asm/mach/time.h>
-
-extern struct sys_timer xttcpss_sys_timer;
+void __init xttcpss_timer_init(void);
#endif
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
index 1b8bf0e..5ebbd8e 100644
--- a/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h
@@ -25,8 +25,9 @@
* address that is known to work.
*/
#define UART0_PHYS 0xE0000000
-#define UART0_SIZE SZ_4K
-#define UART0_VIRT 0xF0001000
+#define UART1_PHYS 0xE0001000
+#define UART_SIZE SZ_4K
+#define UART_VIRT 0xF0001000
#define TTC0_PHYS 0xF8001000
#define TTC0_SIZE SZ_4K
@@ -36,12 +37,17 @@
#define SCU_PERIPH_SIZE SZ_8K
#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE)
+#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
+# define LL_UART_PADDR UART1_PHYS
+#else
+# define LL_UART_PADDR UART0_PHYS
+#endif
+
+#define LL_UART_VADDR UART_VIRT
+
/* The following are intended for the devices that are mapped early */
#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
-#define LL_UART_PADDR UART0_PHYS
-#define LL_UART_VADDR UART0_VIRT
-
#endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index c2c96cc..9662306 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -23,32 +23,15 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
-#include <asm/mach/time.h>
#include <mach/zynq_soc.h>
#include "common.h"
-#define IRQ_TIMERCOUNTER0 42
-
-/*
- * This driver configures the 2 16-bit count-up timers as follows:
- *
- * T1: Timer 1, clocksource for generic timekeeping
- * T2: Timer 2, clockevent source for hrtimers
- * T3: Timer 3, <unused>
- *
- * The input frequency to the timer module for emulation is 2.5MHz which is
- * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
- * the timers are clocked at 78.125KHz (12.8 us resolution).
- *
- * The input frequency to the timer module in silicon will be 200MHz. With the
- * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution).
- */
-#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */
-#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */
-
-#define XTTCPSS_TIMER_BASE TTC0_BASE
-#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1)
/*
* Timer Register Offset Definitions of Timer 1, Increment base address by 4
* and use same offsets for Timer 2
@@ -65,9 +48,14 @@
#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1
-/* Setup the timers to use pre-scaling */
-
-#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32)
+/* Setup the timers to use pre-scaling, using a fixed value for now that will
+ * work across most input frequency, but it may need to be more dynamic
+ */
+#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
+#define PRESCALE 2048 /* The exponent must match this */
+#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1)
+#define CLK_CNTRL_PRESCALE_EN 1
+#define CNT_CNTRL_RESET (1<<4)
/**
* struct xttcpss_timer - This definition defines local timer structure
@@ -75,11 +63,25 @@
* @base_addr: Base address of timer
**/
struct xttcpss_timer {
- void __iomem *base_addr;
+ void __iomem *base_addr;
};
-static struct xttcpss_timer timers[2];
-static struct clock_event_device xttcpss_clockevent;
+struct xttcpss_timer_clocksource {
+ struct xttcpss_timer xttc;
+ struct clocksource cs;
+};
+
+#define to_xttcpss_timer_clksrc(x) \
+ container_of(x, struct xttcpss_timer_clocksource, cs)
+
+struct xttcpss_timer_clockevent {
+ struct xttcpss_timer xttc;
+ struct clock_event_device ce;
+ struct clk *clk;
+};
+
+#define to_xttcpss_timer_clkevent(x) \
+ container_of(x, struct xttcpss_timer_clockevent, ce)
/**
* xttcpss_set_interval - Set the timer interval value
@@ -101,7 +103,7 @@
/* Reset the counter (0x10) so that it starts from 0, one-shot
mode makes this needed for timing to be right. */
- ctrl_reg |= 0x10;
+ ctrl_reg |= CNT_CNTRL_RESET;
ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
}
@@ -116,90 +118,31 @@
**/
static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = &xttcpss_clockevent;
- struct xttcpss_timer *timer = dev_id;
+ struct xttcpss_timer_clockevent *xttce = dev_id;
+ struct xttcpss_timer *timer = &xttce->xttc;
/* Acknowledge the interrupt and call event handler */
__raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
timer->base_addr + XTTCPSS_ISR_OFFSET);
- evt->event_handler(evt);
+ xttce->ce.event_handler(&xttce->ce);
return IRQ_HANDLED;
}
-static struct irqaction event_timer_irq = {
- .name = "xttcpss clockevent",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = xttcpss_clock_event_interrupt,
-};
-
/**
- * xttcpss_timer_hardware_init - Initialize the timer hardware
- *
- * Initialize the hardware to start the clock source, get the clock
- * event timer ready to use, and hook up the interrupt.
- **/
-static void __init xttcpss_timer_hardware_init(void)
-{
- /* Setup the clock source counter to be an incrementing counter
- * with no interrupt and it rolls over at 0xFFFF. Pre-scale
- it by 32 also. Let it start running now.
- */
- timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE;
-
- __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr +
- XTTCPSS_IER_OFFSET);
- __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr +
- XTTCPSS_CLK_CNTRL_OFFSET);
- __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr +
- XTTCPSS_CNT_CNTRL_OFFSET);
-
- /* Setup the clock event timer to be an interval timer which
- * is prescaled by 32 using the interval interrupt. Leave it
- * disabled for now.
- */
-
- timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4;
-
- __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr +
- XTTCPSS_CNT_CNTRL_OFFSET);
- __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr +
- XTTCPSS_CLK_CNTRL_OFFSET);
- __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr +
- XTTCPSS_IER_OFFSET);
-
- /* Setup IRQ the clock event timer */
- event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT];
- setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq);
-}
-
-/**
- * __raw_readl_cycles - Reads the timer counter register
+ * __xttc_clocksource_read - Reads the timer counter register
*
* returns: Current timer counter register value
**/
-static cycle_t __raw_readl_cycles(struct clocksource *cs)
+static cycle_t __xttc_clocksource_read(struct clocksource *cs)
{
- struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE];
+ struct xttcpss_timer *timer = &to_xttcpss_timer_clksrc(cs)->xttc;
return (cycle_t)__raw_readl(timer->base_addr +
XTTCPSS_COUNT_VAL_OFFSET);
}
-
-/*
- * Instantiate and initialize the clock source structure
- */
-static struct clocksource clocksource_xttcpss = {
- .name = "xttcpss_timer1",
- .rating = 200, /* Reasonable clock source */
- .read = __raw_readl_cycles,
- .mask = CLOCKSOURCE_MASK(16),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
/**
* xttcpss_set_next_event - Sets the time interval for next event
*
@@ -211,7 +154,8 @@
static int xttcpss_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
+ struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
+ struct xttcpss_timer *timer = &xttce->xttc;
xttcpss_set_interval(timer, cycles);
return 0;
@@ -226,12 +170,15 @@
static void xttcpss_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
+ struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
+ struct xttcpss_timer *timer = &xttce->xttc;
u32 ctrl_reg;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- xttcpss_set_interval(timer, TIMER_RATE / HZ);
+ xttcpss_set_interval(timer,
+ DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
+ PRESCALE * HZ));
break;
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_UNUSED:
@@ -252,15 +199,106 @@
}
}
-/*
- * Instantiate and initialize the clock event structure
- */
-static struct clock_event_device xttcpss_clockevent = {
- .name = "xttcpss_timer2",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = xttcpss_set_next_event,
- .set_mode = xttcpss_set_mode,
- .rating = 200,
+static void __init zynq_ttc_setup_clocksource(struct device_node *np,
+ void __iomem *base)
+{
+ struct xttcpss_timer_clocksource *ttccs;
+ struct clk *clk;
+ int err;
+ u32 reg;
+
+ ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
+ if (WARN_ON(!ttccs))
+ return;
+
+ err = of_property_read_u32(np, "reg", ®);
+ if (WARN_ON(err))
+ return;
+
+ clk = of_clk_get_by_name(np, "cpu_1x");
+ if (WARN_ON(IS_ERR(clk)))
+ return;
+
+ err = clk_prepare_enable(clk);
+ if (WARN_ON(err))
+ return;
+
+ ttccs->xttc.base_addr = base + reg * 4;
+
+ ttccs->cs.name = np->name;
+ ttccs->cs.rating = 200;
+ ttccs->cs.read = __xttc_clocksource_read;
+ ttccs->cs.mask = CLOCKSOURCE_MASK(16);
+ ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+ __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPSS_IER_OFFSET);
+ __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ ttccs->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
+ __raw_writel(CNT_CNTRL_RESET,
+ ttccs->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+
+ err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
+ if (WARN_ON(err))
+ return;
+}
+
+static void __init zynq_ttc_setup_clockevent(struct device_node *np,
+ void __iomem *base)
+{
+ struct xttcpss_timer_clockevent *ttcce;
+ int err, irq;
+ u32 reg;
+
+ ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
+ if (WARN_ON(!ttcce))
+ return;
+
+ err = of_property_read_u32(np, "reg", ®);
+ if (WARN_ON(err))
+ return;
+
+ ttcce->xttc.base_addr = base + reg * 4;
+
+ ttcce->clk = of_clk_get_by_name(np, "cpu_1x");
+ if (WARN_ON(IS_ERR(ttcce->clk)))
+ return;
+
+ err = clk_prepare_enable(ttcce->clk);
+ if (WARN_ON(err))
+ return;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (WARN_ON(!irq))
+ return;
+
+ ttcce->ce.name = np->name;
+ ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ ttcce->ce.set_next_event = xttcpss_set_next_event;
+ ttcce->ce.set_mode = xttcpss_set_mode;
+ ttcce->ce.rating = 200;
+ ttcce->ce.irq = irq;
+
+ __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+ __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
+ ttcce->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
+ __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPSS_IER_OFFSET);
+
+ err = request_irq(irq, xttcpss_clock_event_interrupt, IRQF_TIMER,
+ np->name, ttcce);
+ if (WARN_ON(err))
+ return;
+
+ clockevents_config_and_register(&ttcce->ce,
+ clk_get_rate(ttcce->clk) / PRESCALE,
+ 1, 0xfffe);
+}
+
+static const __initconst struct of_device_id zynq_ttc_match[] = {
+ { .compatible = "xlnx,ttc-counter-clocksource",
+ .data = zynq_ttc_setup_clocksource, },
+ { .compatible = "xlnx,ttc-counter-clockevent",
+ .data = zynq_ttc_setup_clockevent, },
+ {}
};
/**
@@ -269,30 +307,27 @@
* Initializes the timer hardware and register the clock source and clock event
* timers with Linux kernal timer framework
**/
-static void __init xttcpss_timer_init(void)
+void __init xttcpss_timer_init(void)
{
- xttcpss_timer_hardware_init();
- clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE);
+ struct device_node *np;
- /* Calculate the parameters to allow the clockevent to operate using
- integer math
- */
- clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4);
+ for_each_compatible_node(np, NULL, "xlnx,ttc") {
+ struct device_node *np_chld;
+ void __iomem *base;
- xttcpss_clockevent.max_delta_ns =
- clockevent_delta2ns(0xfffe, &xttcpss_clockevent);
- xttcpss_clockevent.min_delta_ns =
- clockevent_delta2ns(1, &xttcpss_clockevent);
+ base = of_iomap(np, 0);
+ if (WARN_ON(!base))
+ return;
- /* Indicate that clock event is on 1st CPU as SMP boot needs it */
+ for_each_available_child_of_node(np, np_chld) {
+ int (*cb)(struct device_node *np, void __iomem *base);
+ const struct of_device_id *match;
- xttcpss_clockevent.cpumask = cpumask_of(0);
- clockevents_register_device(&xttcpss_clockevent);
+ match = of_match_node(zynq_ttc_match, np_chld);
+ if (match) {
+ cb = match->data;
+ cb(np_chld, base);
+ }
+ }
+ }
}
-
-/*
- * Instantiate and initialize the system timer structure
- */
-struct sys_timer xttcpss_sys_timer = {
- .init = xttcpss_timer_init,
-};
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 1867944..8db0b98 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -41,7 +41,7 @@
static int __init orion_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
- int i = 0, irq_gpio;
+ int i = 0;
void __iomem *base;
do {
@@ -54,10 +54,6 @@
irq_domain_add_legacy(np, i * 32, 0, 0,
&irq_domain_simple_ops, NULL);
-
- irq_gpio = i * 32;
- orion_gpio_of_init(irq_gpio);
-
return 0;
}
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index a17d7b3..bc50b20 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -929,6 +929,7 @@
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+
#endif /* CONFIG_S5P_DEV_MFC */
/* MIPI CSIS */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index a9b8096..f53beba 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -132,8 +132,6 @@
extern struct platform_device exynos4_device_pcm2;
extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos_device_drm;
-
extern struct platform_device samsung_asoc_dma;
extern struct platform_device samsung_asoc_idma;
extern struct platform_device samsung_device_keypad;
diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h
index ac13227..e6d7c42 100644
--- a/arch/arm/plat-samsung/include/plat/mfc.h
+++ b/arch/arm/plat-samsung/include/plat/mfc.h
@@ -10,6 +10,14 @@
#ifndef __PLAT_SAMSUNG_MFC_H
#define __PLAT_SAMSUNG_MFC_H __FILE__
+struct s5p_mfc_dt_meminfo {
+ unsigned long loff;
+ unsigned long lsize;
+ unsigned long roff;
+ unsigned long rsize;
+ char *compatible;
+};
+
/**
* s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
* @rbase: base address for MFC 'right' memory interface
@@ -24,4 +32,7 @@
void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
phys_addr_t lbase, unsigned int lsize);
+int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,
+ int depth, void *data);
+
#endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
index ad60894..5ec104b 100644
--- a/arch/arm/plat-samsung/s5p-dev-mfc.c
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -14,6 +14,8 @@
#include <linux/dma-mapping.h>
#include <linux/memblock.h>
#include <linux/ioport.h>
+#include <linux/of_fdt.h>
+#include <linux/of.h>
#include <mach/map.h>
#include <plat/devs.h>
@@ -69,3 +71,35 @@
return 0;
}
device_initcall(s5p_mfc_memory_init);
+
+#ifdef CONFIG_OF
+int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ __be32 *prop;
+ unsigned long len;
+ struct s5p_mfc_dt_meminfo *mfc_mem = data;
+
+ if (!data)
+ return 0;
+
+ if (!of_flat_dt_is_compatible(node, mfc_mem->compatible))
+ return 0;
+
+ prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
+ if (!prop || (len != 2 * sizeof(unsigned long)))
+ return 0;
+
+ mfc_mem->loff = be32_to_cpu(prop[0]);
+ mfc_mem->lsize = be32_to_cpu(prop[1]);
+
+ prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
+ if (!prop || (len != 2 * sizeof(unsigned long)))
+ return 0;
+
+ mfc_mem->roff = be32_to_cpu(prop[0]);
+ mfc_mem->rsize = be32_to_cpu(prop[1]);
+
+ return 1;
+}
+#endif
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index a96bda3..4e1ccb1 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -20,6 +20,7 @@
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o
+obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c
new file mode 100644
index 0000000..37a3051
--- /dev/null
+++ b/drivers/clk/clk-zynq.c
@@ -0,0 +1,383 @@
+/*
+ * Copyright (c) 2012 National Instruments
+ *
+ * Josh Cartwright <josh.cartwright@ni.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+
+static void __iomem *slcr_base;
+
+struct zynq_pll_clk {
+ struct clk_hw hw;
+ void __iomem *pll_ctrl;
+ void __iomem *pll_cfg;
+};
+
+#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw)
+
+#define CTRL_PLL_FDIV(x) ((x) >> 12)
+
+static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct zynq_pll_clk *pll = to_zynq_pll_clk(hw);
+ return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl));
+}
+
+static const struct clk_ops zynq_pll_clk_ops = {
+ .recalc_rate = zynq_pll_recalc_rate,
+};
+
+static void __init zynq_pll_clk_setup(struct device_node *np)
+{
+ struct clk_init_data init;
+ struct zynq_pll_clk *pll;
+ const char *parent_name;
+ struct clk *clk;
+ u32 regs[2];
+ int ret;
+
+ ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs));
+ if (WARN_ON(ret))
+ return;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (WARN_ON(!pll))
+ return;
+
+ pll->pll_ctrl = slcr_base + regs[0];
+ pll->pll_cfg = slcr_base + regs[1];
+
+ of_property_read_string(np, "clock-output-names", &init.name);
+
+ init.ops = &zynq_pll_clk_ops;
+ parent_name = of_clk_get_parent_name(np, 0);
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ return;
+
+ ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ if (WARN_ON(ret))
+ return;
+}
+
+struct zynq_periph_clk {
+ struct clk_hw hw;
+ struct clk_onecell_data onecell_data;
+ struct clk *gates[2];
+ void __iomem *clk_ctrl;
+ spinlock_t clkact_lock;
+};
+
+#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw)
+
+static const u8 periph_clk_parent_map[] = {
+ 0, 0, 1, 2
+};
+#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4])
+#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
+
+static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct zynq_periph_clk *periph = to_zynq_periph_clk(hw);
+ return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl));
+}
+
+static u8 zynq_periph_get_parent(struct clk_hw *hw)
+{
+ struct zynq_periph_clk *periph = to_zynq_periph_clk(hw);
+ return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl));
+}
+
+static const struct clk_ops zynq_periph_clk_ops = {
+ .recalc_rate = zynq_periph_recalc_rate,
+ .get_parent = zynq_periph_get_parent,
+};
+
+static void __init zynq_periph_clk_setup(struct device_node *np)
+{
+ struct zynq_periph_clk *periph;
+ const char *parent_names[3];
+ struct clk_init_data init;
+ int clk_num = 0, err;
+ const char *name;
+ struct clk *clk;
+ u32 reg;
+ int i;
+
+ err = of_property_read_u32(np, "reg", ®);
+ if (WARN_ON(err))
+ return;
+
+ periph = kzalloc(sizeof(*periph), GFP_KERNEL);
+ if (WARN_ON(!periph))
+ return;
+
+ periph->clk_ctrl = slcr_base + reg;
+ spin_lock_init(&periph->clkact_lock);
+
+ init.name = np->name;
+ init.ops = &zynq_periph_clk_ops;
+ for (i = 0; i < ARRAY_SIZE(parent_names); i++)
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ init.parent_names = parent_names;
+ init.num_parents = ARRAY_SIZE(parent_names);
+
+ periph->hw.init = &init;
+
+ clk = clk_register(NULL, &periph->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ return;
+
+ err = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ if (WARN_ON(err))
+ return;
+
+ err = of_property_read_string_index(np, "clock-output-names", 0,
+ &name);
+ if (WARN_ON(err))
+ return;
+
+ periph->gates[0] = clk_register_gate(NULL, name, np->name, 0,
+ periph->clk_ctrl, 0, 0,
+ &periph->clkact_lock);
+ if (WARN_ON(IS_ERR(periph->gates[0])))
+ return;
+ clk_num++;
+
+ /* some periph clks have 2 downstream gates */
+ err = of_property_read_string_index(np, "clock-output-names", 1,
+ &name);
+ if (err != -ENODATA) {
+ periph->gates[1] = clk_register_gate(NULL, name, np->name, 0,
+ periph->clk_ctrl, 1, 0,
+ &periph->clkact_lock);
+ if (WARN_ON(IS_ERR(periph->gates[1])))
+ return;
+ clk_num++;
+ }
+
+ periph->onecell_data.clks = periph->gates;
+ periph->onecell_data.clk_num = clk_num;
+
+ err = of_clk_add_provider(np, of_clk_src_onecell_get,
+ &periph->onecell_data);
+ if (WARN_ON(err))
+ return;
+}
+
+/* CPU Clock domain is modelled as a mux with 4 children subclks, whose
+ * derivative rates depend on CLK_621_TRUE
+ */
+
+struct zynq_cpu_clk {
+ struct clk_hw hw;
+ struct clk_onecell_data onecell_data;
+ struct clk *subclks[4];
+ void __iomem *clk_ctrl;
+ spinlock_t clkact_lock;
+};
+
+#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw)
+
+static const u8 zynq_cpu_clk_parent_map[] = {
+ 1, 1, 2, 0
+};
+#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)])
+#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
+
+static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw)
+{
+ struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw);
+ return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl));
+}
+
+static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw);
+ return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl));
+}
+
+static const struct clk_ops zynq_cpu_clk_ops = {
+ .get_parent = zynq_cpu_clk_get_parent,
+ .recalc_rate = zynq_cpu_clk_recalc_rate,
+};
+
+struct zynq_cpu_subclk {
+ struct clk_hw hw;
+ void __iomem *clk_621;
+ enum {
+ CPU_SUBCLK_6X4X,
+ CPU_SUBCLK_3X2X,
+ CPU_SUBCLK_2X,
+ CPU_SUBCLK_1X,
+ } which;
+};
+
+#define CLK_621_TRUE(x) ((x) & 1)
+
+#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw);
+
+static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned long uninitialized_var(rate);
+ struct zynq_cpu_subclk *subclk;
+ bool is_621;
+
+ subclk = to_zynq_cpu_subclk(hw)
+ is_621 = CLK_621_TRUE(ioread32(subclk->clk_621));
+
+ switch (subclk->which) {
+ case CPU_SUBCLK_6X4X:
+ rate = parent_rate;
+ break;
+ case CPU_SUBCLK_3X2X:
+ rate = parent_rate / 2;
+ break;
+ case CPU_SUBCLK_2X:
+ rate = parent_rate / (is_621 ? 3 : 2);
+ break;
+ case CPU_SUBCLK_1X:
+ rate = parent_rate / (is_621 ? 6 : 4);
+ break;
+ };
+
+ return rate;
+}
+
+static const struct clk_ops zynq_cpu_subclk_ops = {
+ .recalc_rate = zynq_cpu_subclk_recalc_rate,
+};
+
+static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which,
+ void __iomem *clk_621)
+{
+ struct zynq_cpu_subclk *subclk;
+ struct clk_init_data init;
+ struct clk *clk;
+ int err;
+
+ err = of_property_read_string_index(np, "clock-output-names",
+ which, &init.name);
+ if (WARN_ON(err))
+ goto err_read_output_name;
+
+ subclk = kzalloc(sizeof(*subclk), GFP_KERNEL);
+ if (!subclk)
+ goto err_subclk_alloc;
+
+ subclk->clk_621 = clk_621;
+ subclk->which = which;
+
+ init.ops = &zynq_cpu_subclk_ops;
+ init.parent_names = &np->name;
+ init.num_parents = 1;
+
+ subclk->hw.init = &init;
+
+ clk = clk_register(NULL, &subclk->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ goto err_clk_register;
+
+ return clk;
+
+err_clk_register:
+ kfree(subclk);
+err_subclk_alloc:
+err_read_output_name:
+ return ERR_PTR(-EINVAL);
+}
+
+static void __init zynq_cpu_clk_setup(struct device_node *np)
+{
+ struct zynq_cpu_clk *cpuclk;
+ const char *parent_names[3];
+ struct clk_init_data init;
+ void __iomem *clk_621;
+ struct clk *clk;
+ u32 reg[2];
+ int err;
+ int i;
+
+ err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
+ if (WARN_ON(err))
+ return;
+
+ cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
+ if (WARN_ON(!cpuclk))
+ return;
+
+ cpuclk->clk_ctrl = slcr_base + reg[0];
+ clk_621 = slcr_base + reg[1];
+ spin_lock_init(&cpuclk->clkact_lock);
+
+ init.name = np->name;
+ init.ops = &zynq_cpu_clk_ops;
+ for (i = 0; i < ARRAY_SIZE(parent_names); i++)
+ parent_names[i] = of_clk_get_parent_name(np, i);
+ init.parent_names = parent_names;
+ init.num_parents = ARRAY_SIZE(parent_names);
+
+ cpuclk->hw.init = &init;
+
+ clk = clk_register(NULL, &cpuclk->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ return;
+
+ err = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ if (WARN_ON(err))
+ return;
+
+ for (i = 0; i < 4; i++) {
+ cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621);
+ if (WARN_ON(IS_ERR(cpuclk->subclks[i])))
+ return;
+ }
+
+ cpuclk->onecell_data.clks = cpuclk->subclks;
+ cpuclk->onecell_data.clk_num = i;
+
+ err = of_clk_add_provider(np, of_clk_src_onecell_get,
+ &cpuclk->onecell_data);
+ if (WARN_ON(err))
+ return;
+}
+
+static const __initconst struct of_device_id zynq_clk_match[] = {
+ { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+ { .compatible = "xlnx,zynq-pll", .data = zynq_pll_clk_setup, },
+ { .compatible = "xlnx,zynq-periph-clock",
+ .data = zynq_periph_clk_setup, },
+ { .compatible = "xlnx,zynq-cpu-clock", .data = zynq_cpu_clk_setup, },
+ {}
+};
+
+void __init xilinx_zynq_clocks_init(void __iomem *slcr)
+{
+ slcr_base = slcr;
+ of_clk_init(zynq_clk_match);
+}
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 14a6c29..a5cbeec 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -171,7 +171,7 @@
config GPIO_MVEBU
def_bool y
- depends on ARCH_MVEBU
+ depends on PLAT_ORION
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index a006f0d..88f41e5 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2797,27 +2797,6 @@
int group = 0;
void __iomem *gpx_base;
-#ifdef CONFIG_PINCTRL_SAMSUNG
- /*
- * This gpio driver includes support for device tree support and
- * there are platforms using it. In order to maintain
- * compatibility with those platforms, and to allow non-dt
- * Exynos4210 platforms to use this gpiolib support, a check
- * is added to find out if there is a active pin-controller
- * driver support available. If it is available, this gpiolib
- * support is ignored and the gpiolib support available in
- * pin-controller driver is used. This is a temporary check and
- * will go away when all of the Exynos4210 platforms have
- * switched to using device tree and the pin-ctrl driver.
- */
- struct device_node *pctrl_np;
- const char *pctrl_compat = "samsung,pinctrl-exynos4210";
- pctrl_np = of_find_compatible_node(NULL, NULL, pctrl_compat);
- if (pctrl_np)
- if (of_device_is_available(pctrl_np))
- return;
-#endif
-
/* gpio part1 */
gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
if (gpio_base1 == NULL) {
@@ -3032,6 +3011,28 @@
int i, nr_chips;
int group = 0;
+#ifdef CONFIG_PINCTRL_SAMSUNG
+ /*
+ * This gpio driver includes support for device tree support and there
+ * are platforms using it. In order to maintain compatibility with those
+ * platforms, and to allow non-dt Exynos4210 platforms to use this
+ * gpiolib support, a check is added to find out if there is a active
+ * pin-controller driver support available. If it is available, this
+ * gpiolib support is ignored and the gpiolib support available in
+ * pin-controller driver is used. This is a temporary check and will go
+ * away when all of the Exynos4210 platforms have switched to using
+ * device tree and the pin-ctrl driver.
+ */
+ struct device_node *pctrl_np;
+ static const struct of_device_id exynos_pinctrl_ids[] = {
+ { .compatible = "samsung,pinctrl-exynos4210", },
+ { .compatible = "samsung,pinctrl-exynos4x12", },
+ };
+ for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
+ if (pctrl_np && of_device_is_available(pctrl_np))
+ return -ENODEV;
+#endif
+
samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
if (soc_is_s3c24xx()) {
diff --git a/drivers/pinctrl/mvebu/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c
index ffe74b2..40c9c3e 100644
--- a/drivers/pinctrl/mvebu/pinctrl-dove.c
+++ b/drivers/pinctrl/mvebu/pinctrl-dove.c
@@ -22,22 +22,22 @@
#include "pinctrl-mvebu.h"
-#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
-#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000)
+#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200)
#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
#define DOVE_AU0_AC97_SEL BIT(16)
-#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C)
#define DOVE_TWSI_ENABLE_OPTION1 BIT(7)
-#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030)
#define DOVE_TWSI_ENABLE_OPTION2 BIT(20)
#define DOVE_TWSI_ENABLE_OPTION3 BIT(21)
#define DOVE_TWSI_OPTION3_GPIO BIT(22)
-#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034)
#define DOVE_SSP_ON_AU1 BIT(0)
-#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN BIT(1)
#define DOVE_NAND_GPIO_EN BIT(0)
-#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40)
#define DOVE_SPI_GPIO_SEL BIT(5)
#define DOVE_UART1_GPIO_SEL BIT(4)
@@ -234,6 +234,14 @@
unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
+ /*
+ * clear all audio1 related bits before configure
+ */
+ gcfg2 &= ~DOVE_TWSI_OPTION3_GPIO;
+ gmpp &= ~DOVE_AU1_SPDIFO_GPIO_EN;
+ sspc1 &= ~DOVE_SSP_ON_AU1;
+ mpp4 &= ~DOVE_AU1_GPIO_SEL;
+
if (config & BIT(0))
gcfg2 |= DOVE_TWSI_OPTION3_GPIO;
if (config & BIT(1))
diff --git a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
index 9a74ef6..fa6ce31 100644
--- a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
+++ b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
@@ -21,340 +21,341 @@
#include "pinctrl-mvebu.h"
-#define V(f6180, f6190, f6192, f6281, f6282) \
+#define V(f6180, f6190, f6192, f6281, f6282, dx4122) \
((f6180 << 0) | (f6190 << 1) | (f6192 << 2) | \
- (f6281 << 3) | (f6282 << 4))
+ (f6281 << 3) | (f6282 << 4) | (dx4122 << 5))
enum kirkwood_variant {
- VARIANT_MV88F6180 = V(1, 0, 0, 0, 0),
- VARIANT_MV88F6190 = V(0, 1, 0, 0, 0),
- VARIANT_MV88F6192 = V(0, 0, 1, 0, 0),
- VARIANT_MV88F6281 = V(0, 0, 0, 1, 0),
- VARIANT_MV88F6282 = V(0, 0, 0, 0, 1),
+ VARIANT_MV88F6180 = V(1, 0, 0, 0, 0, 0),
+ VARIANT_MV88F6190 = V(0, 1, 0, 0, 0, 0),
+ VARIANT_MV88F6192 = V(0, 0, 1, 0, 0, 0),
+ VARIANT_MV88F6281 = V(0, 0, 0, 1, 0, 0),
+ VARIANT_MV88F6282 = V(0, 0, 0, 0, 1, 0),
+ VARIANT_MV98DX4122 = V(0, 0, 0, 0, 0, 1),
};
static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = {
MPP_MODE(0,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "nand", "io2", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io2", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1, 1))),
MPP_MODE(1,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "nand", "io3", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io3", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "mosi", V(1, 1, 1, 1, 1, 1))),
MPP_MODE(2,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "nand", "io4", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io4", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1, 1))),
MPP_MODE(3,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "nand", "io5", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io5", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1, 1))),
MPP_MODE(4,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "nand", "io6", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "uart0", "rxd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io6", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "rxd", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0, 0))),
MPP_MODE(5,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "nand", "io7", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "uart0", "txd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "ptp", "trig", V(1, 1, 1, 1, 0)),
- MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io7", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "txd", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "ptp", "trig", V(1, 1, 1, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(6,
- MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0))),
+ MPP_VAR_FUNCTION(0x0, "sysrst", "out", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "spi", "mosi", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "ptp", "trig", V(1, 1, 1, 1, 0, 0))),
MPP_MODE(7,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0)),
- MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0)),
- MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "pex", "rsto", V(1, 1, 1, 1, 0, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "cs", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "ptp", "trig", V(1, 1, 1, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(8,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "twsi0", "sda", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "uart1", "rts", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xc, "ptp", "clk", V(1, 1, 1, 1, 0)),
- MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "twsi0", "sda", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "rts", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "mii-1", "rxerr", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xc, "ptp", "clk", V(1, 1, 1, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1, 0))),
MPP_MODE(9,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "twsi0", "sck", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "uart1", "cts", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xc, "ptp", "evreq", V(1, 1, 1, 1, 0)),
- MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "twsi0", "sck", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "cts", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xc, "ptp", "evreq", V(1, 1, 1, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1, 0))),
MPP_MODE(10,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0X3, "uart0", "txd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xc, "ptp", "trig", V(1, 1, 1, 1, 0))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "sck", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0X3, "uart0", "txd", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xc, "ptp", "trig", V(1, 1, 1, 1, 0, 0))),
MPP_MODE(11,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "uart0", "rxd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq", V(1, 1, 1, 1, 0)),
- MPP_VAR_FUNCTION(0xc, "ptp-2", "trig", V(1, 1, 1, 1, 0)),
- MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0)),
- MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "spi", "miso", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart0", "rxd", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "ptp-1", "evreq", V(1, 1, 1, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0xc, "ptp-2", "trig", V(1, 1, 1, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0xd, "ptp", "clk", V(1, 1, 1, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0))),
MPP_MODE(12,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 0, 1)),
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)),
- MPP_VAR_FUNCTION(0x1, "sdio", "clk", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xb, "spi", "mosi", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xd, "twsi1", "sda", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "clk", V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xa, "audio", "spdifo", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "spi", "mosi", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xd, "twsi1", "sda", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(13,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "sdio", "cmd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xa, "audio", "rmclk", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "cmd", V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0xa, "audio", "rmclk", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "pwm", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(14,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "sdio", "d0", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xb, "audio-1", "sdi", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "d0", V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x4, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xa, "audio", "spdifi", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "audio-1", "sdi", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xd, "mii", "col", V(1, 1, 1, 1, 1, 0))),
MPP_MODE(15,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "sdio", "d1", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "sata0", "act", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "spi", "cs", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "d1", V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "rts", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "txd", V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "sata0", "act", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "spi", "cs", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(16,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "sdio", "d2", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "sata1", "act", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "extclk", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "d2", V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "uart0", "cts", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "sata1", "act", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "extclk", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xd, "mii", "crs", V(1, 1, 1, 1, 1, 0))),
MPP_MODE(17,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "sdio", "d3", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xa, "sata1", "act", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xd, "twsi1", "sck", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "sdio", "d3", V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xa, "sata1", "act", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xd, "twsi1", "sck", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(18,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "nand", "io0", V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "pex", "clkreq", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io0", V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "pex", "clkreq", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(19,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "nand", "io1", V(1, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(1, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "nand", "io1", V(1, 1, 1, 1, 1, 1))),
MPP_MODE(20,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "txd0", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d0", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(1, 0, 0, 0, 0))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txd0", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d0", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(1, 0, 0, 0, 0, 0))),
MPP_MODE(21,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "txd1", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d1", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txd1", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d1", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(22,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "txd2", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d2", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txd2", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "prsnt", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d2", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(23,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "txd3", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d3", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txd3", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "prsnt", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d3", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(24,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "rxd0", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d4", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxd0", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d4", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(25,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "rxd1", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d5", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxd1", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d5", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(26,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "rxd2", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d6", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxd2", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d6", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(27,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "rxd3", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d7", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxd3", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d7", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(28,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "col", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d8", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "col", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d8", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(29,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "txclk", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d9", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(1, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txclk", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(1, 0, 0, 0, 0, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d9", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(30,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "rxctl", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d10", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxctl", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d10", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(31,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "rxclk", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d11", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxclk", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d11", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(32,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "txclko", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d12", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txclko", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d12", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(33,
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "txctl", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d13", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txctl", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d13", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(34,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "txen", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d14", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "txen", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata1", "act", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d14", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(35,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x3, "ge1", "rxerr", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d15", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(0, 1, 1, 1, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 1, 1, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "tx0ql", V(0, 0, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x3, "ge1", "rxerr", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "sata0", "act", V(0, 1, 1, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d15", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xc, "mii", "rxerr", V(0, 1, 1, 1, 1, 0))),
MPP_MODE(36,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "twsi1", "sda", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp0", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs1", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifi", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "twsi1", "sda", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(37,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "twsi1", "sck", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp1", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "tx2ql", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "spdifo", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "twsi1", "sck", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(38,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d18", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp2", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rx2ql", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "rmclk", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d18", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(39,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d19", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp3", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-cs0", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "bclk", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d19", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(40,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d20", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp4", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-sck", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdo", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d20", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(41,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d21", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp5", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-miso", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "lrclk", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d21", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(42,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d22", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp6", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "spi-mosi", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "mclk", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d22", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(43,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d23", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp7", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "int", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "sdi", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d23", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(44,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "clk", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp8", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rst", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x4, "audio", "extclk", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "clk", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(45,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "e", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 1)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "pclk", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "e", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(46,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp10", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "fs", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "hsync", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(47,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp11", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "drx", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "vsync", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(48,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d16", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp12", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "dtx", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d16", V(0, 0, 0, 0, 1, 0))),
MPP_MODE(49,
- MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0)),
- MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 0)),
- MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 0, 1, 1)),
- MPP_VAR_FUNCTION(0x5, "ptp", "clk", V(0, 0, 0, 1, 0)),
- MPP_VAR_FUNCTION(0xa, "pex", "clkreq", V(0, 0, 0, 0, 1)),
- MPP_VAR_FUNCTION(0xb, "lcd", "d17", V(0, 0, 0, 0, 1))),
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V(0, 0, 0, 1, 0, 1)),
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0x1, "ts", "mp9", V(0, 0, 0, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0x2, "tdm", "rx0ql", V(0, 0, 0, 1, 1, 0)),
+ MPP_VAR_FUNCTION(0x5, "ptp", "clk", V(0, 0, 0, 1, 0, 0)),
+ MPP_VAR_FUNCTION(0xa, "pex", "clkreq", V(0, 0, 0, 0, 1, 0)),
+ MPP_VAR_FUNCTION(0xb, "lcd", "d17", V(0, 0, 0, 0, 1, 0))),
};
static struct mvebu_mpp_ctrl mv88f6180_mpp_controls[] = {
@@ -433,12 +434,23 @@
.ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges),
};
+static struct mvebu_pinctrl_soc_info mv98dx4122_info = {
+ .variant = VARIANT_MV98DX4122,
+ .controls = mv88f628x_mpp_controls,
+ .ncontrols = ARRAY_SIZE(mv88f628x_mpp_controls),
+ .modes = mv88f6xxx_mpp_modes,
+ .nmodes = ARRAY_SIZE(mv88f6xxx_mpp_modes),
+ .gpioranges = mv88f628x_gpio_ranges,
+ .ngpioranges = ARRAY_SIZE(mv88f628x_gpio_ranges),
+};
+
static struct of_device_id kirkwood_pinctrl_of_match[] __devinitdata = {
{ .compatible = "marvell,88f6180-pinctrl", .data = &mv88f6180_info },
{ .compatible = "marvell,88f6190-pinctrl", .data = &mv88f6190_info },
{ .compatible = "marvell,88f6192-pinctrl", .data = &mv88f6192_info },
{ .compatible = "marvell,88f6281-pinctrl", .data = &mv88f6281_info },
{ .compatible = "marvell,88f6282-pinctrl", .data = &mv88f6282_info },
+ { .compatible = "marvell,98dx4122-pinctrl", .data = &mv98dx4122_info },
{ }
};
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 49a8939..b1d956d 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -335,6 +335,9 @@
help
Say Y to enable battery temperature measurements using
thermistor connected on BATCTRL ADC.
+
+source "drivers/power/reset/Kconfig"
+
endif # POWER_SUPPLY
source "drivers/power/avs/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b949cf8..f1d99f4 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -49,3 +49,4 @@
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_POWER_AVS) += avs/
obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
+obj-$(CONFIG_POWER_RESET) += reset/
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
new file mode 100644
index 0000000..6461b48
--- /dev/null
+++ b/drivers/power/reset/Kconfig
@@ -0,0 +1,15 @@
+menuconfig POWER_RESET
+ bool "Board level reset or power off"
+ help
+ Provides a number of drivers which either reset a complete board
+ or shut it down, by manipulating the main power supply on the board.
+
+ Say Y here to enable board reset and power off
+
+config POWER_RESET_GPIO
+ bool "GPIO power-off driver"
+ depends on OF_GPIO && POWER_RESET
+ help
+ This driver supports turning off your board via a GPIO line.
+ If your board needs a GPIO high/low to power down, say Y and
+ create a binding in your devicetree.
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
new file mode 100644
index 0000000..751488a
--- /dev/null
+++ b/drivers/power/reset/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
new file mode 100644
index 0000000..0491e53
--- /dev/null
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -0,0 +1,129 @@
+/*
+ * Toggles a GPIO pin to power down a device
+ *
+ * Jamie Lentin <jm@lentin.co.uk>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Jamie Lentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/module.h>
+
+/*
+ * Hold configuration here, cannot be more than one instance of the driver
+ * since pm_power_off itself is global.
+ */
+static int gpio_num = -1;
+static int gpio_active_low;
+
+static void gpio_poweroff_do_poweroff(void)
+{
+ BUG_ON(gpio_num == -1);
+
+ /* drive it active */
+ gpio_direction_output(gpio_num, !gpio_active_low);
+ mdelay(100);
+ /* rising edge or drive inactive */
+ gpio_set_value(gpio_num, gpio_active_low);
+ mdelay(100);
+ /* falling edge */
+ gpio_set_value(gpio_num, !gpio_active_low);
+
+ /* give it some time */
+ mdelay(3000);
+
+ WARN_ON(1);
+}
+
+static int __devinit gpio_poweroff_probe(struct platform_device *pdev)
+{
+ enum of_gpio_flags flags;
+ bool input = false;
+ int ret;
+
+ /* If a pm_power_off function has already been added, leave it alone */
+ if (pm_power_off != NULL) {
+ pr_err("%s: pm_power_off function already registered",
+ __func__);
+ return -EBUSY;
+ }
+
+ gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
+ if (gpio_num < 0) {
+ pr_err("%s: Could not get GPIO configuration: %d",
+ __func__, gpio_num);
+ return -ENODEV;
+ }
+ gpio_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ if (of_get_property(pdev->dev.of_node, "input", NULL))
+ input = true;
+
+ ret = gpio_request(gpio_num, "poweroff-gpio");
+ if (ret) {
+ pr_err("%s: Could not get GPIO %d", __func__, gpio_num);
+ return ret;
+ }
+ if (input) {
+ if (gpio_direction_input(gpio_num)) {
+ pr_err("Could not set direction of GPIO %d to input",
+ gpio_num);
+ goto err;
+ }
+ } else {
+ if (gpio_direction_output(gpio_num, gpio_active_low)) {
+ pr_err("Could not set direction of GPIO %d", gpio_num);
+ goto err;
+ }
+ }
+
+ pm_power_off = &gpio_poweroff_do_poweroff;
+ return 0;
+
+err:
+ gpio_free(gpio_num);
+ return -ENODEV;
+}
+
+static int __devexit gpio_poweroff_remove(struct platform_device *pdev)
+{
+ if (gpio_num != -1)
+ gpio_free(gpio_num);
+ if (pm_power_off == &gpio_poweroff_do_poweroff)
+ pm_power_off = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id of_gpio_poweroff_match[] = {
+ { .compatible = "gpio-poweroff", },
+ {},
+};
+
+static struct platform_driver gpio_poweroff_driver = {
+ .probe = gpio_poweroff_probe,
+ .remove = __devexit_p(gpio_poweroff_remove),
+ .driver = {
+ .name = "poweroff-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = of_gpio_poweroff_match,
+ },
+};
+
+module_platform_driver(gpio_poweroff_driver);
+
+MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>");
+MODULE_DESCRIPTION("GPIO poweroff driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:poweroff-gpio");
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index f74794c..a7d1f5b 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -14,6 +14,9 @@
#include <linux/mbus.h>
#include <linux/clk.h>
#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
@@ -167,6 +170,8 @@
}
}
+static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
+
static int ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
@@ -177,13 +182,17 @@
struct clk *clk;
void __iomem *regs;
int irq, err;
+ enum orion_ehci_phy_ver phy_version;
if (usb_disabled())
return -ENODEV;
pr_debug("Initializing Orion-SoC USB Host Controller\n");
- irq = platform_get_irq(pdev, 0);
+ if (pdev->dev.of_node)
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ else
+ irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev,
"Found HC with no IRQ. Check %s setup!\n",
@@ -201,6 +210,14 @@
goto err1;
}
+ /*
+ * Right now device-tree probed devices don't get dma_mask
+ * set. Since shared usb code relies on it, set it here for
+ * now. Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &ehci_orion_dma_mask;
+
if (!request_mem_region(res->start, resource_size(res),
ehci_orion_hc_driver.description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
@@ -248,7 +265,12 @@
/*
* setup Orion USB controller.
*/
- switch (pd->phy_version) {
+ if (pdev->dev.of_node)
+ phy_version = EHCI_PHY_NA;
+ else
+ phy_version = pd->phy_version;
+
+ switch (phy_version) {
case EHCI_PHY_NA: /* dont change USB phy settings */
break;
case EHCI_PHY_ORION:
@@ -303,9 +325,19 @@
MODULE_ALIAS("platform:orion-ehci");
+static const struct of_device_id ehci_orion_dt_ids[] __devinitdata = {
+ { .compatible = "marvell,orion-ehci", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
+
static struct platform_driver ehci_orion_driver = {
.probe = ehci_orion_drv_probe,
.remove = __exit_p(ehci_orion_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
- .driver.name = "orion-ehci",
+ .driver = {
+ .name = "orion-ehci",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ehci_orion_dt_ids),
+ },
};
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index 05e1be8..dc42e44 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -32,6 +32,7 @@
#include <linux/timer.h>
#include <linux/bitops.h>
#include <linux/uaccess.h>
+#include <linux/of.h>
#include "at91sam9_wdt.h"
@@ -302,11 +303,21 @@
return res;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id at91_wdt_dt_ids[] __initconst = {
+ { .compatible = "atmel,at91sam9260-wdt" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_wdt_dt_ids);
+#endif
+
static struct platform_driver at91wdt_driver = {
.remove = __exit_p(at91wdt_remove),
.driver = {
.name = "at91_wdt",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(at91_wdt_dt_ids),
},
};
diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h
new file mode 100644
index 0000000..56be7cd
--- /dev/null
+++ b/include/linux/clk/zynq.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 National Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_CLK_ZYNQ_H_
+#define __LINUX_CLK_ZYNQ_H_
+
+void __init xilinx_zynq_clocks_init(void __iomem *slcr);
+
+#endif