[S390] Kconfig: add machine type number to code generation options
Add machine type number to code generation options. Also clean up and
shorten quite a lot of help texts with respect to machine type and
architecture terminology.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index fabb40b..97146ab 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -144,7 +144,7 @@
config 64BIT
bool "64 bit kernel"
help
- Select this option if you have a 64 bit IBM zSeries machine
+ Select this option if you have an IBM z/Architecture machine
and want to use the 64 bit addressing mode.
config 32BIT
@@ -208,7 +208,7 @@
depends on MARCH_G5
help
This option is required for IEEE compliant floating point arithmetic
- on older S/390 machines. Say Y unless you know your machine doesn't
+ on older ESA/390 machines. Say Y unless you know your machine doesn't
need this.
config COMPAT
@@ -237,8 +237,8 @@
space programs and it also selects the addressing mode option above.
The kernel parameter noexec=on will enable this feature and also
switch the addressing modes, default is disabled. Enabling this (via
- kernel parameter) on machines earlier than IBM System z9-109 EC/BC
- will reduce system performance.
+ kernel parameter) on machines earlier than IBM System z9 this will
+ reduce system performance.
comment "Code generation options"
@@ -247,49 +247,46 @@
default MARCH_G5
config MARCH_G5
- bool "S/390 model G5 and G6"
+ bool "System/390 model G5 and G6"
depends on !64BIT
help
Select this to build a 31 bit kernel that works
- on all S/390 and zSeries machines.
+ on all ESA/390 and z/Architecture machines.
config MARCH_Z900
- bool "IBM eServer zSeries model z800 and z900"
+ bool "IBM zSeries model z800 and z900"
help
- Select this to optimize for zSeries machines. This
- will enable some optimizations that are not available
- on older 31 bit only CPUs.
+ Select this to enable optimizations for model z800/z900 (2064 and
+ 2066 series). This will enable some optimizations that are not
+ available on older ESA/390 (31 Bit) only CPUs.
config MARCH_Z990
- bool "IBM eServer zSeries model z890 and z990"
+ bool "IBM zSeries model z890 and z990"
help
- Select this enable optimizations for model z890/z990.
- This will be slightly faster but does not work on
- older machines such as the z900.
+ Select this to enable optimizations for model z890/z990 (2084 and
+ 2086 series). The kernel will be slightly faster but will not work
+ on older machines.
config MARCH_Z9_109
bool "IBM System z9"
help
- Select this to enable optimizations for IBM System z9-109, IBM
- System z9 Enterprise Class (z9 EC), and IBM System z9 Business
- Class (z9 BC). The kernel will be slightly faster but will not
- work on older machines such as the z990, z890, z900, and z800.
+ Select this to enable optimizations for IBM System z9 (2094 and
+ 2096 series). The kernel will be slightly faster but will not work
+ on older machines.
config MARCH_Z10
bool "IBM System z10"
help
- Select this to enable optimizations for IBM System z10. The
- kernel will be slightly faster but will not work on older
- machines such as the z990, z890, z900, z800, z9-109, z9-ec
- and z9-bc.
+ Select this to enable optimizations for IBM System z10 (2097 and
+ 2098 series). The kernel will be slightly faster but will not work
+ on older machines.
config MARCH_Z196
bool "IBM zEnterprise 196"
help
- Select this to enable optimizations for IBM zEnterprise 196.
- The kernel will be slightly faster but will not work on older
- machines such as the z990, z890, z900, z800, z9-109, z9-ec,
- z9-bc, z10-ec and z10-bc.
+ Select this to enable optimizations for IBM zEnterprise 196
+ (2817 series). The kernel will be slightly faster but will not work
+ on older machines.
endchoice