pcmcia: use dev_printk in module rsrc_nonstatic
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index d0c1d63..00aacbe 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -194,13 +194,14 @@
int any;
u_char *b, hole, most;
- printk(KERN_INFO "cs: IO port probe %#x-%#x:",
- base, base+num-1);
+ dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
+ base, base+num-1);
/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
- printk(KERN_ERR "do_io_probe: unable to kmalloc 256 bytes");
+ dev_printk(KERN_ERR, &s->dev,
+ "do_io_probe: unable to kmalloc 256 bytes");
return;
}
for (i = base, most = 0; i < base+num; i += 8) {
@@ -366,8 +367,8 @@
struct socket_data *s_data = s->resource_data;
u_long i, j, bad, fail, step;
- printk(KERN_INFO "cs: memory probe 0x%06lx-0x%06lx:",
- base, base+num-1);
+ dev_printk(KERN_INFO, &s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
+ base, base+num-1);
bad = fail = 0;
step = (num < 0x20000) ? 0x2000 : ((num>>4) & ~0x1fff);
/* don't allow too large steps */
@@ -431,8 +432,8 @@
if (probe_mask & MEM_PROBE_HIGH) {
if (inv_probe(s_data->mem_db.next, s) > 0)
return 0;
- printk(KERN_NOTICE "cs: warning: no high memory space "
- "available!\n");
+ dev_printk(KERN_NOTICE, &s->dev,
+ "cs: warning: no high memory space available!\n");
return -ENODEV;
}
@@ -794,10 +795,11 @@
if (res->flags & IORESOURCE_IO) {
if (res == &ioport_resource)
continue;
- printk(KERN_INFO "pcmcia: parent PCI bridge I/O "
- "window: 0x%llx - 0x%llx\n",
- (unsigned long long)res->start,
- (unsigned long long)res->end);
+ dev_printk(KERN_INFO, &s->cb_dev->dev,
+ "pcmcia: parent PCI bridge I/O "
+ "window: 0x%llx - 0x%llx\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_IO;
@@ -806,10 +808,11 @@
if (res->flags & IORESOURCE_MEM) {
if (res == &iomem_resource)
continue;
- printk(KERN_INFO "pcmcia: parent PCI bridge Memory "
- "window: 0x%llx - 0x%llx\n",
- (unsigned long long)res->start,
- (unsigned long long)res->end);
+ dev_printk(KERN_INFO, &s->cb_dev->dev,
+ "pcmcia: parent PCI bridge Memory "
+ "window: 0x%llx - 0x%llx\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end);
if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_MEM;
}