[media] cx231xx: Don't let an interface number to go past the array
On some newer boards, like HVR-930C HD, the information at
the PCB tables are sometimes higher than the ones actually
available on the device. That causes the probing code to
go past the interfaces array.
Add checks to the interface number before going past the
array.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index 6d785db..38d8510f 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -1135,6 +1135,7 @@
int nr = 0, ifnum;
int i, isoc_pipe = 0;
char *speed;
+ u8 idx;
struct usb_interface_assoc_descriptor *assoc_desc;
ifnum = interface->altsetting[0].desc.bInterfaceNumber;
@@ -1254,8 +1255,13 @@
goto err_init;
/* compute alternate max packet sizes for video */
- uif = udev->actconfig->interface[dev->current_pcb_config.
- hs_config_info[0].interface_info.video_index + 1];
+ idx = dev->current_pcb_config.hs_config_info[0].interface_info.video_index + 1;
+ if (idx >= dev->max_iad_interface_count) {
+ cx231xx_errdev("Video PCB interface #%d doesn't exist\n", idx);
+ retval = -ENODEV;
+ goto err_init;
+ }
+ uif = udev->actconfig->interface[idx];
dev->video_mode.end_point_addr = uif->altsetting[0].
endpoint[isoc_pipe].desc.bEndpointAddress;
@@ -1283,9 +1289,14 @@
}
/* compute alternate max packet sizes for vbi */
- uif = udev->actconfig->interface[dev->current_pcb_config.
- hs_config_info[0].interface_info.
- vanc_index + 1];
+
+ idx = dev->current_pcb_config.hs_config_info[0].interface_info.vanc_index + 1;
+ if (idx >= dev->max_iad_interface_count) {
+ cx231xx_errdev("VBI PCB interface #%d doesn't exist\n", idx);
+ retval = -ENODEV;
+ goto err_vbi_alt;
+ }
+ uif = udev->actconfig->interface[idx];
dev->vbi_mode.end_point_addr =
uif->altsetting[0].endpoint[isoc_pipe].desc.
@@ -1315,9 +1326,13 @@
}
/* compute alternate max packet sizes for sliced CC */
- uif = udev->actconfig->interface[dev->current_pcb_config.
- hs_config_info[0].interface_info.
- hanc_index + 1];
+ idx = dev->current_pcb_config.hs_config_info[0].interface_info.hanc_index + 1;
+ if (idx >= dev->max_iad_interface_count) {
+ cx231xx_errdev("Sliced CC PCB interface #%d doesn't exist\n", idx);
+ retval = -ENODEV;
+ goto err_sliced_cc_alt;
+ }
+ uif = udev->actconfig->interface[idx];
dev->sliced_cc_mode.end_point_addr =
uif->altsetting[0].endpoint[isoc_pipe].desc.
@@ -1347,10 +1362,13 @@
if (dev->current_pcb_config.ts1_source != 0xff) {
/* compute alternate max packet sizes for TS1 */
- uif = udev->actconfig->interface[dev->current_pcb_config.
- hs_config_info[0].
- interface_info.
- ts1_index + 1];
+ idx = dev->current_pcb_config.hs_config_info[0].interface_info.ts1_index + 1;
+ if (idx >= dev->max_iad_interface_count) {
+ cx231xx_errdev("TS1 PCB interface #%d doesn't exist\n", idx);
+ retval = -ENODEV;
+ goto err_ts1_alt;
+ }
+ uif = udev->actconfig->interface[idx];
dev->ts1_mode.end_point_addr =
uif->altsetting[0].endpoint[isoc_pipe].