[ARM] pxa: re-order platforms in Kconfig and Makefile
Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted
in the following order:
1. By category:
Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed
by end-user products (this is to ensure the commonly referenced platforms
will appear first)
2. By vendor name in alphabetic within each category
(this is to ensure code reuse and similar platforms can be grouped as
much as possible)
VENDOR BOARD
Intel/Marvell Lubbock
Intel/Marvell Mainstone
Intel/Marvell Zylonite
Intel/Marvell Littleton
Intel/Marvell TavorEVB
Intel/Marvell SAAR
Accelent IDP
Arcom/Eurotech VIPER
Community Balloon3
Cogent CSB726
CompuLab EM_X270
CompuLab EXEDA
CompuLab ARMCORE
CompuLab CM_X300
Gumstix Gumstix
Intel Research MOTE2
Intel research Stargate2
Iskratel XCEP
Keith and Koep Trizeps4
LogicPD LPD270
Phytec PCM027
Toradex Colibri
HP HX4700
HP H5000
HTC Himalaya
HTC Magician
Mitac MioA701
Motorola EZX
NEC MP900C
Palm Palm PDA
Palm Palm GSM
Sharp Zaurus
Toshiba E-Series
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 28f0260..e62572d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -31,6 +31,95 @@
endif
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+
+config ARCH_LUBBOCK
+ bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+ select PXA25x
+ select SA1111
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_MAINSTONE
+ bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+ select PXA27x
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_ZYLONITE
+ bool "PXA3xx Development Platform (aka Zylonite)"
+ select PXA3xx
+ select PXA_SSP
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_LITTLETON
+ bool "PXA3xx Form Factor Platform (aka Littleton)"
+ select PXA3xx
+ select PXA_SSP
+
+config MACH_TAVOREVB
+ bool "PXA930 Evaluation Board (aka TavorEVB)"
+ select PXA3xx
+ select CPU_PXA930
+
+config MACH_SAAR
+ bool "PXA930 Handheld Platform (aka SAAR)"
+ select PXA3xx
+ select CPU_PXA930
+
+comment "Third Party Dev Platforms (sorted by vendor name)"
+
+config ARCH_PXA_IDP
+ bool "Accelent Xscale IDP"
+ select PXA25x
+
+config ARCH_VIPER
+ bool "Arcom/Eurotech VIPER SBC"
+ select PXA25x
+ select ISA
+ select I2C_GPIO
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+ select PXA_HAVE_ISA_IRQS
+
+config MACH_BALLOON3
+ bool "Balloon 3 board"
+ select PXA27x
+ select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_CSB726
+ bool "Enable Cogent CSB726 System On a Module"
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Cogent
+ CSB726 System On Module.
+
+config CSB726_CSB701
+ bool "Enable support for CSB701 baseboard"
+ depends on MACH_CSB726
+
+config MACH_ARMCORE
+ bool "CompuLab CM-X255/CM-X270 modules"
+ select PXA27x
+ select IWMMXT
+ select PXA25x
+ select PXA_SSP
+
+config MACH_EM_X270
+ bool "CompuLab EM-x270 platform"
+ select PXA27x
+
+config MACH_EXEDA
+ bool "CompuLab eXeda platform"
+ select PXA27x
+
+config MACH_CM_X300
+ bool "CompuLab CM-X300 modules"
+ select PXA3xx
+ select CPU_PXA300
+
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
select PXA25x
@@ -62,11 +151,56 @@
select IWMMXT
select PXA_HAVE_BOARD_IRQS
-config ARCH_LUBBOCK
- bool "Intel DBPXA250 Development Platform"
+config MACH_XCEP
+ bool "Iskratel Electronics XCEP"
select PXA25x
- select SA1111
- select PXA_HAVE_BOARD_IRQS
+ select MTD
+ select MTD_PARTITIONS
+ select MTD_PHYSMAP
+ select MTD_CFI_INTELEXT
+ select MTD_CFI
+ select MTD_CHAR
+ select SMC91X
+ select PXA_SSP
+ help
+ PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+ Tuned for usage in Libera instruments for particle accelerators.
+
+config TRIZEPS_PXA
+ bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
+config MACH_TRIZEPS4
+ bool "Keith und Koep Trizeps4 DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
+ select PXA27x
+
+config MACH_TRIZEPS4WL
+ bool "Keith und Koep Trizeps4-WL DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
+ select PXA27x
+ select PXA_SSP
+
+choice
+ prompt "Select base board for Trizeps module"
+ depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
+ bool "ConXS Eval Board"
+
+config MACH_TRIZEPS_UCONXS
+ bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+ bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+ bool
+ help
+ Enable PCMCIA support for Trizeps modules
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
@@ -74,25 +208,213 @@
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
-config MACH_MAINSTONE
- bool "Intel HCDDBBVA0 Development Platform"
+config MACH_PCM027
+ bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
+ select IWMMXT
+ select PXA_SSP
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+ bool "PHYTEC PCM-990 development board"
+ select HAVE_PWM
+ depends on MACH_PCM027
+
+choice
+ prompt "display on pcm990"
+ depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+ bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+ bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+ bool "no display"
+
+endchoice
+
+config MACH_COLIBRI
+ bool "Toradex Colibri PXA270"
+ select PXA27x
+
+config MACH_COLIBRI300
+ bool "Toradex Colibri PXA300/310"
+ select PXA3xx
+ select CPU_PXA300
+
+config MACH_COLIBRI320
+ bool "Toradex Colibri PXA320"
+ select PXA3xx
+ select CPU_PXA320
+
+comment "End-user Products (sorted by vendor name)"
+
+config MACH_H4700
+ bool "HP iPAQ hx4700"
+ select PXA27x
+ select IWMMXT
+ select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_H5000
+ bool "HP iPAQ h5000"
+ select PXA25x
+
+config MACH_HIMALAYA
+ bool "HTC Himalaya Support"
+ select CPU_PXA26x
+ select FB_W100
+
+config MACH_MAGICIAN
+ bool "Enable HTC Magician Support"
+ select PXA27x
+ select IWMMXT
+ select PXA_SSP
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+ bool "Mitac Mio A701 Support"
+ select PXA27x
+ select IWMMXT
+ select HAVE_PWM
+ select GPIO_SYSFS
+ help
+ Say Y here if you intend to run this kernel on a
+ MIO A701. Currently there is only basic support
+ for this PDA.
+
+config PXA_EZX
+ bool "Motorola EZX Platform"
+ select PXA27x
+ select IWMMXT
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_EZX_A780
+ bool "Motorola EZX A780"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E680
+ bool "Motorola EZX E680"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A1200
+ bool "Motorola EZX A1200"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A910
+ bool "Motorola EZX A910"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E6
+ bool "Motorola EZX E6"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E2
+ bool "Motorola EZX E2"
+ default y
+ depends on PXA_EZX
+
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
-config MACH_BALLOON3
- bool "Balloon 3 board"
+config ARCH_PXA_PALM
+ bool "PXA based Palm PDAs"
+ select HAVE_PWM
+
+config MACH_PALMTE2
+ bool "Palm Tungsten|E2"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+ handheld computer.
+
+config MACH_PALMTC
+ bool "Palm Tungsten|C"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|C
+ handheld computer.
+
+config MACH_PALMT5
+ bool "Palm Tungsten|T5"
+ default y
+ depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
- select PXA_HAVE_BOARD_IRQS
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+ handheld computer.
-config ARCH_PXA_IDP
- bool "Accelent Xscale IDP"
- select PXA25x
+config MACH_PALMTX
+ bool "Palm T|X"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm T|X
+ handheld computer.
+
+config MACH_PALMZ72
+ bool "Palm Zire 72"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on Palm Zire 72
+ handheld computer.
+
+config MACH_PALMLD
+ bool "Palm LifeDrive"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm LifeDrive
+ handheld computer.
+
+config PALM_TREO
+ bool
+ depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+ bool "Palm Centro 685 (GSM)"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ select PALM_TREO
+ help
+ Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
+ smartphone.
+
+config MACH_TREO680
+ bool "Palm Treo 680"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ select PALM_TREO
+ help
+ Say Y here if you intend to run this kernel on Palm Treo 680
+ smartphone.
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
@@ -169,15 +491,6 @@
select PXA25x
select PXA_HAVE_BOARD_IRQS
-config ARCH_VIPER
- bool "Arcom/Eurotech VIPER SBC"
- select PXA25x
- select ISA
- select I2C_GPIO
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
- select PXA_HAVE_ISA_IRQS
-
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
@@ -234,313 +547,6 @@
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
-config TRIZEPS_PXA
- bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-
-config MACH_H5000
- bool "HP iPAQ h5000"
- select PXA25x
-
-config MACH_TRIZEPS4
- bool "Keith und Koep Trizeps4 DIMM-Module"
- depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
- select PXA27x
-
-config MACH_TRIZEPS4WL
- bool "Keith und Koep Trizeps4-WL DIMM-Module"
- depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
- select PXA27x
- select PXA_SSP
-
-choice
- prompt "Select base board for Trizeps module"
- depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
- bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
- bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
- bool "another Board"
-
-endchoice
-
-config TRIZEPS_PCMCIA
- bool
- help
- Enable PCMCIA support for Trizeps modules
-
-config MACH_EM_X270
- bool "CompuLab EM-x270 platform"
- select PXA27x
-
-config MACH_EXEDA
- bool "CompuLab eXeda platform"
- select PXA27x
-
-config MACH_COLIBRI
- bool "Toradex Colibri PXA270"
- select PXA27x
-
-config MACH_COLIBRI300
- bool "Toradex Colibri PXA300/310"
- select PXA3xx
- select CPU_PXA300
-
-config MACH_COLIBRI320
- bool "Toradex Colibri PXA320"
- select PXA3xx
- select CPU_PXA320
-
-config MACH_ZYLONITE
- bool "PXA3xx Development Platform (aka Zylonite)"
- select PXA3xx
- select PXA_SSP
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
- bool "PXA3xx Form Factor Platform (aka Littleton)"
- select PXA3xx
- select PXA_SSP
-
-config MACH_TAVOREVB
- bool "PXA930 Evaluation Board (aka TavorEVB)"
- select PXA3xx
- select CPU_PXA930
-
-config MACH_SAAR
- bool "PXA930 Handheld Platform (aka SAAR)"
- select PXA3xx
- select CPU_PXA930
-
-config MACH_ARMCORE
- bool "CompuLab CM-X255/CM-X270 modules"
- select PXA27x
- select IWMMXT
- select PXA25x
- select PXA_SSP
-
-config MACH_CM_X300
- bool "CompuLab CM-X300 modules"
- select PXA3xx
- select CPU_PXA300
-
-config MACH_H4700
- bool "HP iPAQ hx4700"
- select PXA27x
- select IWMMXT
- select PXA_SSP
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_MAGICIAN
- bool "Enable HTC Magician Support"
- select PXA27x
- select IWMMXT
- select PXA_SSP
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_HIMALAYA
- bool "HTC Himalaya Support"
- select CPU_PXA26x
- select FB_W100
-
-config MACH_MIOA701
- bool "Mitac Mio A701 Support"
- select PXA27x
- select IWMMXT
- select HAVE_PWM
- select GPIO_SYSFS
- help
- Say Y here if you intend to run this kernel on a
- MIO A701. Currently there is only basic support
- for this PDA.
-
-config MACH_PCM027
- bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
- select PXA27x
- select IWMMXT
- select PXA_SSP
- select PXA_HAVE_BOARD_IRQS
-
-config ARCH_PXA_PALM
- bool "PXA based Palm PDAs"
- select HAVE_PWM
-
-config MACH_PALMTE2
- bool "Palm Tungsten|E2"
- default y
- depends on ARCH_PXA_PALM
- select PXA25x
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|E2
- handheld computer.
-
-config MACH_PALMTC
- bool "Palm Tungsten|C"
- default y
- depends on ARCH_PXA_PALM
- select PXA25x
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|C
- handheld computer.
-
-config MACH_PALMT5
- bool "Palm Tungsten|T5"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|T5
- handheld computer.
-
-config MACH_PALMTX
- bool "Palm T|X"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Palm T|X
- handheld computer.
-
-config MACH_PALMZ72
- bool "Palm Zire 72"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on Palm Zire 72
- handheld computer.
-
-config PALM_TREO
- bool
- depends on ARCH_PXA_PALM
-
-config MACH_CENTRO
- bool "Palm Centro 685 (GSM)"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- select PALM_TREO
- help
- Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
- smartphone.
-
-config MACH_TREO680
- bool "Palm Treo 680"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- select PALM_TREO
- help
- Say Y here if you intend to run this kernel on Palm Treo 680
- smartphone.
-
-config MACH_PALMLD
- bool "Palm LifeDrive"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Palm LifeDrive
- handheld computer.
-
-config MACH_PCM990_BASEBOARD
- bool "PHYTEC PCM-990 development board"
- select HAVE_PWM
- depends on MACH_PCM027
-
-choice
- prompt "display on pcm990"
- depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
- bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
- bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
- bool "no display"
-
-endchoice
-
-config MACH_CSB726
- bool "Enable Cogent CSB726 System On a Module"
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Cogent
- CSB726 System On Module.
-
-config CSB726_CSB701
- bool "Enable supprot for CSB701 baseboard"
- depends on MACH_CSB726
-
-config PXA_EZX
- bool "Motorola EZX Platform"
- select PXA27x
- select IWMMXT
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_EZX_A780
- bool "Motorola EZX A780"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E680
- bool "Motorola EZX E680"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_A1200
- bool "Motorola EZX A1200"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_A910
- bool "Motorola EZX A910"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E6
- bool "Motorola EZX E6"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E2
- bool "Motorola EZX E2"
- default y
- depends on PXA_EZX
-
-config MACH_XCEP
- bool "Iskratel Electronics XCEP"
- select PXA25x
- select MTD
- select MTD_PARTITIONS
- select MTD_PHYSMAP
- select MTD_CFI_INTELEXT
- select MTD_CFI
- select MTD_CHAR
- select SMC91X
- select PXA_SSP
- help
- PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
- Tuned for usage in Libera instruments for particle accelerators.
-
endmenu
config PXA25x