ixgbe: Add support for another X550 device.
This patch adds support for another 10baseT X550 device.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 4b681c4..3bf2f3c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -133,6 +133,7 @@
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550T), board_X550},
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KX4), board_X550EM_x},
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KR), board_X550EM_x},
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_10G_T), board_X550EM_x},
/* required last entry */
{0, }
};
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 22646c3..ac6c0af 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -347,6 +347,7 @@
case TN1010_PHY_ID:
phy_type = ixgbe_phy_tn;
break;
+ case X550_PHY_ID:
case X540_PHY_ID:
phy_type = ixgbe_phy_aq;
break;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index b9eee32..b6f424f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1353,6 +1353,7 @@
#define TN1010_PHY_ID 0x00A19410
#define TNX_FW_REV 0xB
#define X540_PHY_ID 0x01540200
+#define X550_PHY_ID 0x01540220
#define X557_PHY_ID 0x01540240
#define QT2022_PHY_ID 0x0043A400
#define ATH_PHY_ID 0x03429050
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index fee3d07..886bef5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1561,6 +1561,7 @@
s32 status;
u32 ctrl = 0;
u32 i;
+ u32 hlreg0;
bool link_up = false;
/* Call adapter stop to disable Tx/Rx and clear interrupts */
@@ -1645,6 +1646,12 @@
hw->mac.num_rar_entries = 128;
hw->mac.ops.init_rx_addrs(hw);
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
+ hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ hlreg0 &= ~IXGBE_HLREG0_MDCSPD;
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+ }
+
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
ixgbe_setup_mux_ctl(hw);