USB: rio500.c: remove dbg() usage
dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.
CC: Cesar Miquel <miquel@df.uba.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index cb55dc5..1084124 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -153,10 +153,10 @@
requesttype = rio_cmd.requesttype | USB_DIR_IN |
USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- dbg
- ("sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x",
- requesttype, rio_cmd.request, rio_cmd.value,
- rio_cmd.index, rio_cmd.length);
+ dev_dbg(&rio->rio_dev->dev,
+ "sending command:reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
+ requesttype, rio_cmd.request, rio_cmd.value,
+ rio_cmd.index, rio_cmd.length);
/* Send rio control message */
retries = 3;
while (retries) {
@@ -176,8 +176,9 @@
result);
retries = 0;
} else {
- dbg("Executed ioctl. Result = %d (data=%02x)",
- result, buffer[0]);
+ dev_dbg(&rio->rio_dev->dev,
+ "Executed ioctl. Result = %d (data=%02x)\n",
+ result, buffer[0]);
if (copy_to_user(rio_cmd.buffer, buffer,
rio_cmd.length)) {
free_page((unsigned long) buffer);
@@ -223,9 +224,10 @@
requesttype = rio_cmd.requesttype | USB_DIR_OUT |
USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- dbg("sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x",
- requesttype, rio_cmd.request, rio_cmd.value,
- rio_cmd.index, rio_cmd.length);
+ dev_dbg(&rio->rio_dev->dev,
+ "sending command: reqtype=%0x req=%0x value=%0x index=%0x len=%0x\n",
+ requesttype, rio_cmd.request, rio_cmd.value,
+ rio_cmd.index, rio_cmd.length);
/* Send rio control message */
retries = 3;
while (retries) {
@@ -245,7 +247,8 @@
result);
retries = 0;
} else {
- dbg("Executed ioctl. Result = %d", result);
+ dev_dbg(&rio->rio_dev->dev,
+ "Executed ioctl. Result = %d\n", result);
retries = 0;
}
@@ -317,8 +320,9 @@
usb_sndbulkpipe(rio->rio_dev, 2),
obuf, thistime, &partial, 5000);
- dbg("write stats: result:%d thistime:%lu partial:%u",
- result, thistime, partial);
+ dev_dbg(&rio->rio_dev->dev,
+ "write stats: result:%d thistime:%lu partial:%u\n",
+ result, thistime, partial);
if (result == -ETIMEDOUT) { /* NAK - so hold for a while */
if (!maxretry--) {
@@ -398,8 +402,9 @@
ibuf, this_read, &partial,
8000);
- dbg("read stats: result:%d this_read:%u partial:%u",
- result, this_read, partial);
+ dev_dbg(&rio->rio_dev->dev,
+ "read stats: result:%d this_read:%u partial:%u\n",
+ result, this_read, partial);
if (partial) {
count = this_read = partial;
@@ -479,7 +484,7 @@
usb_deregister_dev(intf, &usb_rio_class);
return -ENOMEM;
}
- dbg("probe_rio: obuf address:%p", rio->obuf);
+ dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
if (!(rio->ibuf = kmalloc(IBUF_SIZE, GFP_KERNEL))) {
dev_err(&dev->dev,
@@ -488,7 +493,7 @@
kfree(rio->obuf);
return -ENOMEM;
}
- dbg("probe_rio: ibuf address:%p", rio->ibuf);
+ dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
mutex_init(&(rio->lock));