net: dsa: bcm_sf2: Configure traffic classes to queue mapping
By default, all traffic goes to queue 0, re-configure the traffic
classes to quality of service mapping such that priority X maps to queue
X, where X is from 0 through 7.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8eecfd2..637072d 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -229,6 +229,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
s8 cpu_port = ds->dst[ds->index].cpu_port;
+ unsigned int i;
u32 reg;
/* Clear the memory power down */
@@ -240,6 +241,14 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
if (priv->brcm_tag_mask & BIT(port))
bcm_sf2_brcm_hdr_setup(priv, port);
+ /* Configure Traffic Class to QoS mapping, allow each priority to map
+ * to a different queue number
+ */
+ reg = core_readl(priv, CORE_PORT_TC2_QOS_MAP_PORT(port));
+ for (i = 0; i < 8; i++)
+ reg |= i << (PRT_TO_QID_SHIFT * i);
+ core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
+
/* Clear the Rx and Tx disable bits and set to no spanning tree */
core_writel(priv, 0, CORE_G_PCTL_PORT(port));