Base Au1200 2.6 support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index adfc317..cf10dc2 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -29,6 +29,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
+
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -42,6 +43,8 @@
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/system.h>
+/* #include <linux/module.h> */
+
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
/*
@@ -55,43 +58,16 @@
* functions. The drivers allocate the data buffers and assign them
* to the descriptors.
*/
-static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
+static spinlock_t au1xxx_dbdma_spin_lock = SPIN_LOCK_UNLOCKED;
/* I couldn't find a macro that did this......
*/
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
-static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized;
+static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static int dbdma_initialized=0;
static void au1xxx_dbdma_init(void);
-typedef struct dbdma_device_table {
- u32 dev_id;
- u32 dev_flags;
- u32 dev_tsize;
- u32 dev_devwidth;
- u32 dev_physaddr; /* If FIFO */
- u32 dev_intlevel;
- u32 dev_intpolarity;
-} dbdev_tab_t;
-
-typedef struct dbdma_chan_config {
- u32 chan_flags;
- u32 chan_index;
- dbdev_tab_t *chan_src;
- dbdev_tab_t *chan_dest;
- au1x_dma_chan_t *chan_ptr;
- au1x_ddma_desc_t *chan_desc_base;
- au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
- void *chan_callparam;
- void (*chan_callback)(int, void *, struct pt_regs *);
-} chan_tab_t;
-
-#define DEV_FLAGS_INUSE (1 << 0)
-#define DEV_FLAGS_ANYUSE (1 << 1)
-#define DEV_FLAGS_OUT (1 << 2)
-#define DEV_FLAGS_IN (1 << 3)
-
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
/* UARTS */
@@ -157,13 +133,13 @@
{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+ { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
+ { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+ { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
- { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+ { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
@@ -173,9 +149,9 @@
{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+ { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+ { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
@@ -184,6 +160,24 @@
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+ /* Provide 16 user definable device types */
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
};
#define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
@@ -203,6 +197,30 @@
return NULL;
}
+u32
+au1xxx_ddma_add_device(dbdev_tab_t *dev)
+{
+ u32 ret = 0;
+ dbdev_tab_t *p=NULL;
+ static u16 new_id=0x1000;
+
+ p = find_dbdev_id(0);
+ if ( NULL != p )
+ {
+ memcpy(p, dev, sizeof(dbdev_tab_t));
+ p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+ ret = p->dev_id;
+ new_id++;
+#if 0
+ printk("add_device: id:%x flags:%x padd:%x\n",
+ p->dev_id, p->dev_flags, p->dev_physaddr );
+#endif
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(au1xxx_ddma_add_device);
+
/* Allocate a channel and return a non-zero descriptor if successful.
*/
u32
@@ -215,7 +233,7 @@
int i;
dbdev_tab_t *stp, *dtp;
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
/* We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
@@ -225,9 +243,6 @@
au1xxx_dbdma_init();
dbdma_initialized = 1;
- if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS))
- return 0;
-
if ((stp = find_dbdev_id(srcid)) == NULL) return 0;
if ((dtp = find_dbdev_id(destid)) == NULL) return 0;
@@ -269,9 +284,9 @@
/* If kmalloc fails, it is caught below same
* as a channel not available.
*/
- ctp = kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
+ ctp = (chan_tab_t *)
+ kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
chan_tab_ptr[i] = ctp;
- ctp->chan_index = chan = i;
break;
}
}
@@ -279,10 +294,11 @@
if (ctp != NULL) {
memset(ctp, 0, sizeof(chan_tab_t));
+ ctp->chan_index = chan = i;
dcp = DDMA_CHANNEL_BASE;
dcp += (0x0100 * chan);
ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
- cp = (volatile au1x_dma_chan_t *)dcp;
+ cp = (au1x_dma_chan_t *)dcp;
ctp->chan_src = stp;
ctp->chan_dest = dtp;
ctp->chan_callback = callback;
@@ -299,6 +315,9 @@
i |= DDMA_CFG_DED;
if (dtp->dev_intpolarity)
i |= DDMA_CFG_DP;
+ if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+ (dtp->dev_flags & DEV_FLAGS_SYNC))
+ i |= DDMA_CFG_SYNC;
cp->ddma_cfg = i;
au_sync();
@@ -309,14 +328,14 @@
rv = (u32)(&chan_tab_ptr[chan]);
}
else {
- /* Release devices.
- */
+ /* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
}
}
return rv;
}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
/* Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
@@ -344,6 +363,7 @@
return rv;
}
+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
/* Allocate a descriptor ring, initializing as much as possible.
*/
@@ -370,7 +390,8 @@
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
- desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
+ desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
+ GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
@@ -381,7 +402,7 @@
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
+ if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
@@ -461,9 +482,14 @@
/* If source input is fifo, set static address.
*/
if (stp->dev_flags & DEV_FLAGS_IN) {
- src0 = stp->dev_physaddr;
+ if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
+ else
src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+
}
+ if (stp->dev_physaddr)
+ src0 = stp->dev_physaddr;
/* Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
@@ -487,10 +513,18 @@
/* If destination output is fifo, set static address.
*/
if (dtp->dev_flags & DEV_FLAGS_OUT) {
- dest0 = dtp->dev_physaddr;
+ if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+ else
dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
+ if (dtp->dev_physaddr)
+ dest0 = dtp->dev_physaddr;
+#if 0
+ printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+#endif
for (i=0; i<entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
@@ -499,6 +533,7 @@
dp->dscr_dest0 = dest0;
dp->dscr_dest1 = dest1;
dp->dscr_stat = 0;
+ dp->sw_context = dp->sw_status = 0;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
dp++;
}
@@ -511,13 +546,14 @@
return (u32)(ctp->chan_desc_base);
}
+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
/* Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
u32
-au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -544,24 +580,40 @@
*/
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
- ctp->chan_ptr->ddma_dbell = 0xffffffff; /* Make it go */
-
+ /* Check flags */
+ if (flags & DDMA_FLAGS_IE)
+ dp->dscr_cmd0 |= DSCR_CMD0_IE;
+ if (flags & DDMA_FLAGS_NOIE)
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
/* Get next descriptor pointer.
*/
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+ /*
+ * There is an errata on the Au1200/Au1550 parts that could result
+ * in "stale" data being DMA'd. It has to do with the snoop logic on
+ * the dache eviction buffer. NONCOHERENT_IO is on by default for
+ * these parts. If it is fixedin the future, these dma_cache_inv will
+ * just be nothing more than empty macros. See io.h.
+ * */
+ dma_cache_wback_inv(buf,nbytes);
+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ au_sync();
+ dma_cache_wback_inv(dp, sizeof(dp));
+ ctp->chan_ptr->ddma_dbell = 0;
+
/* return something not zero.
*/
return nbytes;
}
+EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
/* Put a destination buffer into the DMA ring.
* This updates the destination pointer and byte count. Normally used
* to place an empty buffer into the ring for fifo to memory transfers.
*/
u32
-au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -583,11 +635,33 @@
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Load up buffer address and byte count.
- */
+ /* Load up buffer address and byte count */
+
+ /* Check flags */
+ if (flags & DDMA_FLAGS_IE)
+ dp->dscr_cmd0 |= DSCR_CMD0_IE;
+ if (flags & DDMA_FLAGS_NOIE)
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
+#if 0
+ printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+#endif
+ /*
+ * There is an errata on the Au1200/Au1550 parts that could result in
+ * "stale" data being DMA'd. It has to do with the snoop logic on the
+ * dache eviction buffer. NONCOHERENT_IO is on by default for these
+ * parts. If it is fixedin the future, these dma_cache_inv will just
+ * be nothing more than empty macros. See io.h.
+ * */
+ dma_cache_inv(buf,nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ au_sync();
+ dma_cache_wback_inv(dp, sizeof(dp));
+ ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer.
*/
@@ -597,6 +671,7 @@
*/
return nbytes;
}
+EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
/* Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
@@ -646,7 +721,7 @@
au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
int halt_timeout = 0;
ctp = *((chan_tab_t **)chanid);
@@ -666,6 +741,7 @@
cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
au_sync();
}
+EXPORT_SYMBOL(au1xxx_dbdma_stop);
/* Start using the current descriptor pointer. If the dbdma encounters
* a not valid descriptor, it will stop. In this case, we can just
@@ -675,17 +751,17 @@
au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
ctp = *((chan_tab_t **)chanid);
-
cp = ctp->chan_ptr;
cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
au_sync();
- cp->ddma_dbell = 0xffffffff; /* Make it go */
+ cp->ddma_dbell = 0;
au_sync();
}
+EXPORT_SYMBOL(au1xxx_dbdma_start);
void
au1xxx_dbdma_reset(u32 chanid)
@@ -704,15 +780,21 @@
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
+ /* reset our SW status -- this is used to determine
+ * if a descriptor is in use by upper level SW. Since
+ * posting can reset 'V' bit.
+ */
+ dp->sw_status = 0;
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
+EXPORT_SYMBOL(au1xxx_dbdma_reset);
u32
au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
u32 rv;
ctp = *((chan_tab_t **)chanid);
@@ -747,15 +829,16 @@
kfree(ctp);
}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
-static irqreturn_t
+static void
dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- u32 intstat;
+ u32 intstat, flags;
u32 chan_index;
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
intstat = dbdma_gptr->ddma_intstat;
au_sync();
@@ -774,19 +857,26 @@
(ctp->chan_callback)(irq, ctp->chan_callparam, regs);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
-
- return IRQ_HANDLED;
}
-static void
-au1xxx_dbdma_init(void)
+static void au1xxx_dbdma_init(void)
{
+ int irq_nr;
+
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
- if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT,
+#if defined(CONFIG_SOC_AU1550)
+ irq_nr = AU1550_DDMA_INT;
+#elif defined(CONFIG_SOC_AU1200)
+ irq_nr = AU1200_DDMA_INT;
+#else
+ #error Unknown Au1x00 SOC
+#endif
+
+ if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
"Au1xxx dbdma", (void *)dbdma_gptr))
printk("Can't get 1550 dbdma irq");
}
@@ -797,7 +887,8 @@
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
dbdev_tab_t *stp, *dtp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
+ u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
@@ -822,15 +913,64 @@
dp = ctp->chan_desc_base;
do {
- printk("dp %08x, cmd0 %08x, cmd1 %08x\n",
- (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
- printk("src0 %08x, src1 %08x, dest0 %08x\n",
- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0);
- printk("dest1 %08x, stat %08x, nxtptr %08x\n",
- dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr);
+ printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+ printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+ dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
+ printk("stat %08x, nxtptr %08x\n",
+ dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
+/* Put a descriptor into the DMA ring.
+ * This updates the source/destination pointers and byte count.
+ */
+u32
+au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+{
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+ u32 nbytes=0;
+
+ /* I guess we could check this to be within the
+ * range of the table......
+ */
+ ctp = *((chan_tab_t **)chanid);
+
+ /* We should have multiple callers for a particular channel,
+ * an interrupt doesn't affect this pointer nor the descriptor,
+ * so no locking should be needed.
+ */
+ dp = ctp->put_ptr;
+
+ /* If the descriptor is valid, we are way ahead of the DMA
+ * engine, so just return an error condition.
+ */
+ if (dp->dscr_cmd0 & DSCR_CMD0_V)
+ return 0;
+
+ /* Load up buffer addresses and byte count.
+ */
+ dp->dscr_dest0 = dscr->dscr_dest0;
+ dp->dscr_source0 = dscr->dscr_source0;
+ dp->dscr_dest1 = dscr->dscr_dest1;
+ dp->dscr_source1 = dscr->dscr_source1;
+ dp->dscr_cmd1 = dscr->dscr_cmd1;
+ nbytes = dscr->dscr_cmd1;
+ /* Allow the caller to specifiy if an interrupt is generated */
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+ dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
+ ctp->chan_ptr->ddma_dbell = 0;
+
+ /* Get next descriptor pointer.
+ */
+ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+ /* return something not zero.
+ */
+ return nbytes;
+}
+
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */