extcon: max8997: Move defined constant to header file
This patch move defined constants to header file(max77693-private.h)
because of mask/unmask selectively interrupt of MUIC device according
to attribute of H/W board.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index 6ae21bf..acf42e9 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -194,6 +194,55 @@
MAX8997_MUIC_REG_END = 0xf,
};
+/* MAX8997-MUIC STATUS1 register */
+#define STATUS1_ADC_SHIFT 0
+#define STATUS1_ADCLOW_SHIFT 5
+#define STATUS1_ADCERR_SHIFT 6
+#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT)
+#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT)
+#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT)
+
+/* MAX8997-MUIC STATUS2 register */
+#define STATUS2_CHGTYP_SHIFT 0
+#define STATUS2_CHGDETRUN_SHIFT 3
+#define STATUS2_DCDTMR_SHIFT 4
+#define STATUS2_DBCHG_SHIFT 5
+#define STATUS2_VBVOLT_SHIFT 6
+#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT)
+#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT)
+#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT)
+#define STATUS2_DBCHG_MASK (0x1 << STATUS2_DBCHG_SHIFT)
+#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT)
+
+/* MAX8997-MUIC STATUS3 register */
+#define STATUS3_OVP_SHIFT 2
+#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT)
+
+/* MAX8997-MUIC CONTROL1 register */
+#define COMN1SW_SHIFT 0
+#define COMP2SW_SHIFT 3
+#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT)
+#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT)
+#define CONTROL1_SW_MASK (COMP2SW_MASK | COMN1SW_MASK)
+
+#define CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \
+ | (1 << COMN1SW_SHIFT))
+#define CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \
+ | (2 << COMN1SW_SHIFT))
+#define CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \
+ | (3 << COMN1SW_SHIFT))
+#define CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \
+ | (0 << COMN1SW_SHIFT))
+
+#define MAX8997_ADC_GROUND 0x00
+#define MAX8997_ADC_MHL 0x01
+#define MAX8997_ADC_JIG_USB_1 0x18
+#define MAX8997_ADC_JIG_USB_2 0x19
+#define MAX8997_ADC_DESKDOCK 0x1a
+#define MAX8997_ADC_JIG_UART 0x1c
+#define MAX8997_ADC_CARDOCK 0x1d
+#define MAX8997_ADC_OPEN 0x1f
+
enum max8997_haptic_reg {
MAX8997_HAPTIC_REG_GENERAL = 0x00,
MAX8997_HAPTIC_REG_CONF1 = 0x01,