usb: move the OTG state from the USB PHY to the OTG structure
Before using the PHY framework instead of the USB PHY one, we need to
move the OTG state into another place, since it won't be available when
USB PHY isn't used. This patch moves the OTG state into the OTG
structure, and makes all the needed modifications in the drivers
using the OTG state.
[ balbi@ti.com : fix build regressions with phy-tahvo.c, musb_dsps.c,
phy-isp1301-omap, and chipidea's debug.c ]
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index 795d653..f038804 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -220,7 +220,7 @@
/* ------ State ----- */
seq_printf(s, "OTG state: %s\n\n",
- usb_otg_state_string(ci->transceiver->state));
+ usb_otg_state_string(ci->transceiver->otg->state));
/* ------ State Machine Variables ----- */
seq_printf(s, "a_bus_drop: %d\n", fsm->a_bus_drop);
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index caaabc5..8cb2508 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -328,7 +328,7 @@
set_tmout(ci, indicator);
/* only vbus fall below B_sess_vld in b_idle state */
- if (ci->transceiver->state == OTG_STATE_B_IDLE)
+ if (ci->fsm.otg->state == OTG_STATE_B_IDLE)
ci_otg_queue_work(ci);
}
@@ -582,11 +582,11 @@
* when there is no gadget class driver
*/
if (ci->fsm.id && !(ci->driver) &&
- ci->transceiver->state < OTG_STATE_A_IDLE)
+ ci->fsm.otg->state < OTG_STATE_A_IDLE)
return 0;
if (otg_statemachine(&ci->fsm)) {
- if (ci->transceiver->state == OTG_STATE_A_IDLE) {
+ if (ci->fsm.otg->state == OTG_STATE_A_IDLE) {
/*
* Further state change for cases:
* a_idle to b_idle; or
@@ -600,7 +600,7 @@
ci_otg_queue_work(ci);
if (ci->id_event)
ci->id_event = false;
- } else if (ci->transceiver->state == OTG_STATE_B_IDLE) {
+ } else if (ci->fsm.otg->state == OTG_STATE_B_IDLE) {
if (ci->fsm.b_sess_vld) {
ci->fsm.power_up = 0;
/*
@@ -627,7 +627,7 @@
otg_bsess_vld = hw_read_otgsc(ci, OTGSC_BSV);
port_conn = hw_read(ci, OP_PORTSC, PORTSC_CCS);
- switch (ci->transceiver->state) {
+ switch (ci->fsm.otg->state) {
case OTG_STATE_A_WAIT_BCON:
if (port_conn) {
fsm->b_conn = 1;
@@ -794,7 +794,7 @@
ci->transceiver->otg = ci->fsm.otg;
ci->fsm.power_up = 1;
ci->fsm.id = hw_read_otgsc(ci, OTGSC_ID) ? 1 : 0;
- ci->transceiver->state = OTG_STATE_UNDEFINED;
+ ci->fsm.otg->state = OTG_STATE_UNDEFINED;
ci->fsm.ops = &ci_otg_ops;
mutex_init(&ci->fsm.lock);
diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
index 98e8340..c6b35b7 100644
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -124,10 +124,10 @@
static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
{
state_changed = 1;
- if (fsm->otg->phy->state == new_state)
+ if (fsm->otg->state == new_state)
return 0;
VDBG("Set state: %s\n", usb_otg_state_string(new_state));
- otg_leave_state(fsm, fsm->otg->phy->state);
+ otg_leave_state(fsm, fsm->otg->state);
switch (new_state) {
case OTG_STATE_B_IDLE:
otg_drv_vbus(fsm, 0);
@@ -236,7 +236,7 @@
break;
}
- fsm->otg->phy->state = new_state;
+ fsm->otg->state = new_state;
return 0;
}
@@ -247,7 +247,7 @@
mutex_lock(&fsm->lock);
- state = fsm->otg->phy->state;
+ state = fsm->otg->state;
state_changed = 0;
/* State machine state change judgement */
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 0231606d..cf89b4b1 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -183,7 +183,7 @@
otg_start_hnp(hcd->usb_phy->otg);
local_irq_save(flags);
- hcd->usb_phy->state = OTG_STATE_A_SUSPEND;
+ hcd->usb_phy->otg.state = OTG_STATE_A_SUSPEND;
writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]);
l = omap_readl(OTG_CTRL);
l &= ~OTG_A_BUSREQ;
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index a2735df..d836a3e 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -149,25 +149,25 @@
*/
devctl = musb_readb(mregs, MUSB_DEVCTL);
dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_BCON:
devctl &= ~MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
} else {
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
musb_writel(musb->ctrl_base, CORE_INTR_SRC_SET_REG,
MUSB_INTR_VBUSERROR << AM35X_INTR_USB_SHIFT);
break;
@@ -176,7 +176,7 @@
if (devctl & MUSB_DEVCTL_BDEVICE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
else
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
break;
default:
break;
@@ -193,9 +193,9 @@
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || (musb->a_wait_bcon == 0 &&
- musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+ musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
del_timer(&otg_workaround);
last_timer = jiffies;
return;
@@ -208,7 +208,7 @@
last_timer = timeout;
dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
jiffies_to_msecs(timeout - jiffies));
mod_timer(&otg_workaround, timeout);
}
@@ -278,27 +278,27 @@
* devctl.
*/
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
- musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
otg->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&otg_workaround);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
/* NOTE: this must complete power-on within 100 ms. */
dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
err ? " ERROR" : "",
devctl);
ret = IRQ_HANDLED;
@@ -324,7 +324,7 @@
}
/* Poll for ID change */
- if (musb->xceiv->state == OTG_STATE_B_IDLE)
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
spin_unlock_irqrestore(&musb->lock, flags);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 8554c6f..f23ce40b 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -185,8 +185,8 @@
}
/* Start sampling ID pin, when plug is removed from MUSB */
- if ((musb->xceiv->state == OTG_STATE_B_IDLE
- || musb->xceiv->state == OTG_STATE_A_WAIT_BCON) ||
+ if ((musb->xceiv->otg->state == OTG_STATE_B_IDLE
+ || musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON) ||
(musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
musb->a_wait_bcon = TIMER_DELAY;
@@ -205,7 +205,7 @@
static u8 toggle;
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_IDLE:
case OTG_STATE_A_WAIT_BCON:
/* Start a new session */
@@ -219,7 +219,7 @@
if (!(val & MUSB_DEVCTL_BDEVICE)) {
gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
} else {
gpio_set_value(musb->config->gpio_vrsel, 0);
/* Ignore VBUSERROR and SUSPEND IRQ */
@@ -229,7 +229,7 @@
val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
musb_writeb(musb->mregs, MUSB_INTRUSB, val);
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
}
mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
break;
@@ -245,7 +245,7 @@
if (!(val & MUSB_DEVCTL_BDEVICE)) {
gpio_set_value(musb->config->gpio_vrsel, 1);
- musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
} else {
gpio_set_value(musb->config->gpio_vrsel, 0);
@@ -280,13 +280,13 @@
break;
default:
dev_dbg(musb->controller, "%s state not handled\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
break;
}
spin_unlock_irqrestore(&musb->lock, flags);
dev_dbg(musb->controller, "state is %s\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
static void bfin_musb_enable(struct musb *musb)
@@ -307,7 +307,7 @@
dev_dbg(musb->controller, "VBUS %s, devctl %02x "
/* otg %3x conf %08x prcm %08x */ "\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 058775e..527c7fe 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -198,20 +198,20 @@
*/
devctl = musb_readb(mregs, MUSB_DEVCTL);
dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_BCON:
devctl &= ~MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
} else {
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
break;
@@ -226,7 +226,7 @@
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
break;
}
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG,
MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT);
break;
@@ -248,7 +248,7 @@
if (devctl & MUSB_DEVCTL_BDEVICE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
else
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
break;
default:
break;
@@ -265,9 +265,9 @@
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || (musb->a_wait_bcon == 0 &&
- musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+ musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
del_timer(&otg_workaround);
last_timer = jiffies;
return;
@@ -280,7 +280,7 @@
last_timer = timeout;
dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
jiffies_to_msecs(timeout - jiffies));
mod_timer(&otg_workaround, timeout);
}
@@ -341,26 +341,26 @@
* devctl.
*/
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
- musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
otg->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&otg_workaround);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
err ? " ERROR" : "",
devctl);
ret = IRQ_HANDLED;
@@ -375,7 +375,7 @@
musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
/* Poll for ID change */
- if (musb->xceiv->state == OTG_STATE_B_IDLE)
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
spin_unlock_irqrestore(&musb->lock, flags);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 04de3ac..3c1d9b2 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -214,10 +214,10 @@
*/
devctl = musb_readb(mregs, MUSB_DEVCTL);
dev_dbg(musb->controller, "poll devctl %02x (%s)\n", devctl,
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_VFALL:
/* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL
* seems to mis-handle session "start" otherwise (or in our
@@ -228,7 +228,7 @@
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
break;
}
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG,
MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT);
break;
@@ -251,7 +251,7 @@
if (devctl & MUSB_DEVCTL_BDEVICE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
else
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
break;
default:
break;
@@ -325,20 +325,20 @@
* to stop registering in devctl.
*/
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
- musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
otg->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
del_timer(&otg_workaround);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
otg->default_a = 0;
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
@@ -348,7 +348,7 @@
davinci_musb_source_power(musb, drvvbus, 0);
dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
err ? " ERROR" : "",
devctl);
retval = IRQ_HANDLED;
@@ -361,7 +361,7 @@
musb_writel(tibase, DAVINCI_USB_EOI_REG, 0);
/* poll for ID change */
- if (musb->xceiv->state == OTG_STATE_B_IDLE)
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
spin_unlock_irqrestore(&musb->lock, flags);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e46e295..df9c5fa 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -360,23 +360,23 @@
unsigned long flags;
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_B_WAIT_ACON:
dev_dbg(musb->controller, "HNP: b_wait_acon timeout; back to b_peripheral\n");
musb_g_disconnect(musb);
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
musb->is_active = 0;
break;
case OTG_STATE_A_SUSPEND:
case OTG_STATE_A_WAIT_BCON:
dev_dbg(musb->controller, "HNP: %s timeout\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
musb_platform_set_vbus(musb, 0);
- musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
break;
default:
dev_dbg(musb->controller, "HNP: Unhandled mode %s\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
spin_unlock_irqrestore(&musb->lock, flags);
}
@@ -391,19 +391,19 @@
u8 reg;
dev_dbg(musb->controller, "HNP: stop from %s\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_PERIPHERAL:
musb_g_disconnect(musb);
dev_dbg(musb->controller, "HNP: back to %s\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
break;
case OTG_STATE_B_HOST:
dev_dbg(musb->controller, "HNP: Disabling HR\n");
if (hcd)
hcd->self.is_b_host = 0;
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
MUSB_DEV_MODE(musb);
reg = musb_readb(mbase, MUSB_POWER);
reg |= MUSB_POWER_SUSPENDM;
@@ -412,7 +412,7 @@
break;
default:
dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
/*
@@ -449,13 +449,13 @@
*/
if (int_usb & MUSB_INTR_RESUME) {
handled = IRQ_HANDLED;
- dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->state));
+ dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->otg->state));
if (devctl & MUSB_DEVCTL_HM) {
void __iomem *mbase = musb->mregs;
u8 power;
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_SUSPEND:
/* remote wakeup? later, GetPortStatus
* will stop RESUME signaling
@@ -482,25 +482,25 @@
&musb->finish_resume_work,
msecs_to_jiffies(20));
- musb->xceiv->state = OTG_STATE_A_HOST;
+ musb->xceiv->otg->state = OTG_STATE_A_HOST;
musb->is_active = 1;
musb_host_resume_root_hub(musb);
break;
case OTG_STATE_B_WAIT_ACON:
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
musb->is_active = 1;
MUSB_DEV_MODE(musb);
break;
default:
WARNING("bogus %s RESUME (%s)\n",
"host",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
} else {
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_SUSPEND:
/* possibly DISCONNECT is upcoming */
- musb->xceiv->state = OTG_STATE_A_HOST;
+ musb->xceiv->otg->state = OTG_STATE_A_HOST;
musb_host_resume_root_hub(musb);
break;
case OTG_STATE_B_WAIT_ACON:
@@ -523,7 +523,7 @@
default:
WARNING("bogus %s RESUME (%s)\n",
"peripheral",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
}
}
@@ -539,7 +539,7 @@
}
dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
/* IRQ arrives from ID pin sense or (later, if VBUS power
* is removed) SRP. responses are time critical:
@@ -550,7 +550,7 @@
*/
musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
musb->ep0_stage = MUSB_EP0_START;
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
musb_platform_set_vbus(musb, 1);
@@ -576,7 +576,7 @@
* REVISIT: do delays from lots of DEBUG_KERNEL checks
* make trouble here, keeping VBUS < 4.4V ?
*/
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
/* recovery is dicey once we've gotten past the
* initial stages of enumeration, but if VBUS
@@ -605,7 +605,7 @@
dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller,
"VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
devctl,
({ char *s;
switch (devctl & MUSB_DEVCTL_VBUS) {
@@ -630,10 +630,10 @@
if (int_usb & MUSB_INTR_SUSPEND) {
dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n",
- usb_otg_state_string(musb->xceiv->state), devctl);
+ usb_otg_state_string(musb->xceiv->otg->state), devctl);
handled = IRQ_HANDLED;
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_PERIPHERAL:
/* We also come here if the cable is removed, since
* this silicon doesn't report ID-no-longer-grounded.
@@ -657,7 +657,7 @@
musb_g_suspend(musb);
musb->is_active = musb->g.b_hnp_enable;
if (musb->is_active) {
- musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
+ musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON;
dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n");
mod_timer(&musb->otg_timer, jiffies
+ msecs_to_jiffies(
@@ -670,7 +670,7 @@
+ msecs_to_jiffies(musb->a_wait_bcon));
break;
case OTG_STATE_A_HOST:
- musb->xceiv->state = OTG_STATE_A_SUSPEND;
+ musb->xceiv->otg->state = OTG_STATE_A_SUSPEND;
musb->is_active = musb->hcd->self.b_hnp_enable;
break;
case OTG_STATE_B_HOST:
@@ -713,7 +713,7 @@
musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
/* indicate new connection to OTG machine */
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_B_PERIPHERAL:
if (int_usb & MUSB_INTR_SUSPEND) {
dev_dbg(musb->controller, "HNP: SUSPEND+CONNECT, now b_host\n");
@@ -725,7 +725,7 @@
case OTG_STATE_B_WAIT_ACON:
dev_dbg(musb->controller, "HNP: CONNECT, now b_host\n");
b_host:
- musb->xceiv->state = OTG_STATE_B_HOST;
+ musb->xceiv->otg->state = OTG_STATE_B_HOST;
if (musb->hcd)
musb->hcd->self.is_b_host = 1;
del_timer(&musb->otg_timer);
@@ -733,7 +733,7 @@
default:
if ((devctl & MUSB_DEVCTL_VBUS)
== (3 << MUSB_DEVCTL_VBUS_SHIFT)) {
- musb->xceiv->state = OTG_STATE_A_HOST;
+ musb->xceiv->otg->state = OTG_STATE_A_HOST;
if (hcd)
hcd->self.is_b_host = 0;
}
@@ -743,16 +743,16 @@
musb_host_poke_root_hub(musb);
dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n",
- usb_otg_state_string(musb->xceiv->state), devctl);
+ usb_otg_state_string(musb->xceiv->otg->state), devctl);
}
if (int_usb & MUSB_INTR_DISCONNECT) {
dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
MUSB_MODE(musb), devctl);
handled = IRQ_HANDLED;
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
case OTG_STATE_A_SUSPEND:
musb_host_resume_root_hub(musb);
@@ -770,7 +770,7 @@
musb_root_disconnect(musb);
if (musb->hcd)
musb->hcd->self.is_b_host = 0;
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
MUSB_DEV_MODE(musb);
musb_g_disconnect(musb);
break;
@@ -786,7 +786,7 @@
break;
default:
WARNING("unhandled DISCONNECT transition (%s)\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
break;
}
}
@@ -812,15 +812,15 @@
}
} else {
dev_dbg(musb->controller, "BUS RESET as %s\n",
- usb_otg_state_string(musb->xceiv->state));
- switch (musb->xceiv->state) {
+ usb_otg_state_string(musb->xceiv->otg->state));
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_SUSPEND:
musb_g_reset(musb);
/* FALLTHROUGH */
case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */
/* never use invalid T(a_wait_bcon) */
dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
TA_WAIT_BCON(musb));
mod_timer(&musb->otg_timer, jiffies
+ msecs_to_jiffies(TA_WAIT_BCON(musb)));
@@ -831,19 +831,19 @@
break;
case OTG_STATE_B_WAIT_ACON:
dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n",
- usb_otg_state_string(musb->xceiv->state));
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ usb_otg_state_string(musb->xceiv->otg->state));
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
musb_g_reset(musb);
break;
case OTG_STATE_B_IDLE:
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
/* FALLTHROUGH */
case OTG_STATE_B_PERIPHERAL:
musb_g_reset(musb);
break;
default:
dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
}
}
@@ -1630,7 +1630,7 @@
int ret = -EINVAL;
spin_lock_irqsave(&musb->lock, flags);
- ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->state));
+ ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->otg->state));
spin_unlock_irqrestore(&musb->lock, flags);
return ret;
@@ -1675,7 +1675,7 @@
spin_lock_irqsave(&musb->lock, flags);
/* force T(a_wait_bcon) to be zero/unlimited *OR* valid */
musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ;
- if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON)
+ if (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)
musb->is_active = 0;
musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val));
spin_unlock_irqrestore(&musb->lock, flags);
@@ -1743,8 +1743,8 @@
{
struct musb *musb = container_of(data, struct musb, irq_work);
- if (musb->xceiv->state != musb->xceiv_old_state) {
- musb->xceiv_old_state = musb->xceiv->state;
+ if (musb->xceiv->otg->state != musb->xceiv_old_state) {
+ musb->xceiv_old_state = musb->xceiv->otg->state;
sysfs_notify(&musb->controller->kobj, NULL, "mode");
}
}
@@ -1983,10 +1983,10 @@
if (musb->xceiv->otg->default_a) {
MUSB_HST_MODE(musb);
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
} else {
MUSB_DEV_MODE(musb);
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
}
switch (musb->port_mode) {
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 759ef1d..440333f 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -179,9 +179,9 @@
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || (musb->a_wait_bcon == 0 &&
- musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+ musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON)) {
dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
del_timer(&glue->timer);
glue->last_timer = jiffies;
return;
@@ -201,7 +201,7 @@
glue->last_timer = timeout;
dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
jiffies_to_msecs(timeout - jiffies));
mod_timer(&glue->timer, timeout);
}
@@ -265,10 +265,10 @@
*/
devctl = dsps_readb(mregs, MUSB_DEVCTL);
dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_BCON:
dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
skip_session = 1;
@@ -277,10 +277,10 @@
case OTG_STATE_A_IDLE:
case OTG_STATE_B_IDLE:
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
} else {
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
@@ -288,7 +288,7 @@
mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
dsps_writel(musb->ctrl_base, wrp->coreintr_set,
MUSB_INTR_VBUSERROR << wrp->usb_shift);
break;
@@ -373,26 +373,26 @@
* devctl.
*/
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
- musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
mod_timer(&glue->timer,
jiffies + wrp->poll_seconds * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (drvvbus) {
MUSB_HST_MODE(musb);
musb->xceiv->otg->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
del_timer(&glue->timer);
} else {
musb->is_active = 0;
MUSB_DEV_MODE(musb);
musb->xceiv->otg->default_a = 0;
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
}
/* NOTE: this must complete power-on within 100 ms. */
dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
err ? " ERROR" : "",
devctl);
ret = IRQ_HANDLED;
@@ -402,7 +402,7 @@
ret |= musb_interrupt(musb);
/* Poll for ID change in OTG port mode */
- if (musb->xceiv->state == OTG_STATE_B_IDLE &&
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
out:
@@ -900,7 +900,7 @@
dsps_writel(mbase, wrp->mode, glue->context.mode);
dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
- if (musb->xceiv->state == OTG_STATE_B_IDLE &&
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4ab1896..56c31b7 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1546,7 +1546,7 @@
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_B_PERIPHERAL:
/* NOTE: OTG state machine doesn't include B_SUSPENDED;
* that's part of the standard usb 1.1 state machine, and
@@ -1587,7 +1587,7 @@
goto done;
default:
dev_dbg(musb->controller, "Unhandled wake: %s\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
goto done;
}
@@ -1791,7 +1791,7 @@
MUSB_DEV_MODE(musb);
musb->xceiv->otg->default_a = 0;
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
/* this "gadget" abstracts/virtualizes the controller */
musb->g.name = musb_driver_name;
@@ -1857,7 +1857,7 @@
musb->is_active = 1;
otg_set_peripheral(otg, &musb->g);
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
spin_unlock_irqrestore(&musb->lock, flags);
musb_start(musb);
@@ -1941,7 +1941,7 @@
(void) musb_gadget_vbus_draw(&musb->g, 0);
- musb->xceiv->state = OTG_STATE_UNDEFINED;
+ musb->xceiv->otg->state = OTG_STATE_UNDEFINED;
stop_activity(musb, NULL);
otg_set_peripheral(musb->xceiv->otg, NULL);
@@ -1968,7 +1968,7 @@
void musb_g_resume(struct musb *musb)
{
musb->is_suspended = 0;
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_B_IDLE:
break;
case OTG_STATE_B_WAIT_ACON:
@@ -1982,7 +1982,7 @@
break;
default:
WARNING("unhandled RESUME transition (%s)\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
}
@@ -1994,10 +1994,10 @@
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
dev_dbg(musb->controller, "devctl %02x\n", devctl);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_B_IDLE:
if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
break;
case OTG_STATE_B_PERIPHERAL:
musb->is_suspended = 1;
@@ -2012,7 +2012,7 @@
* A_PERIPHERAL may need care too
*/
WARNING("unhandled SUSPEND transition (%s)\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
}
@@ -2043,22 +2043,22 @@
spin_lock(&musb->lock);
}
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
default:
dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n",
- usb_otg_state_string(musb->xceiv->state));
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ usb_otg_state_string(musb->xceiv->otg->state));
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
break;
case OTG_STATE_A_PERIPHERAL:
- musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
MUSB_HST_MODE(musb);
break;
case OTG_STATE_B_WAIT_ACON:
case OTG_STATE_B_HOST:
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_IDLE:
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
break;
case OTG_STATE_B_SRP_INIT:
break;
@@ -2118,13 +2118,13 @@
* In that case, do not rely on devctl for setting
* peripheral mode.
*/
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
musb->g.is_a_peripheral = 0;
} else if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
musb->g.is_a_peripheral = 0;
} else {
- musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL;
musb->g.is_a_peripheral = 1;
}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 855793d..23d474d 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2463,7 +2463,7 @@
if (!is_host_active(musb))
return 0;
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_SUSPEND:
return 0;
case OTG_STATE_A_WAIT_VRISE:
@@ -2473,7 +2473,7 @@
*/
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
- musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
break;
default:
break;
@@ -2481,7 +2481,7 @@
if (musb->is_active) {
WARNING("trying to suspend as %s while active\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
return -EBUSY;
} else
return 0;
@@ -2678,7 +2678,7 @@
MUSB_HST_MODE(musb);
musb->xceiv->otg->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
otg_set_host(musb->xceiv->otg, &hcd->self);
hcd->self.otg_port = 1;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index e2d2d8c..a133bd8c 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -69,7 +69,7 @@
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb->hcd);
/* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv->state = OTG_STATE_A_HOST;
+ musb->xceiv->otg->state = OTG_STATE_A_HOST;
spin_unlock_irqrestore(&musb->lock, flags);
}
@@ -107,9 +107,9 @@
dev_dbg(musb->controller, "Root port suspended, power %02x\n", power);
musb->port1_status |= USB_PORT_STAT_SUSPEND;
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_HOST:
- musb->xceiv->state = OTG_STATE_A_SUSPEND;
+ musb->xceiv->otg->state = OTG_STATE_A_SUSPEND;
musb->is_active = otg->host->b_hnp_enable;
if (musb->is_active)
mod_timer(&musb->otg_timer, jiffies
@@ -118,13 +118,13 @@
musb_platform_try_idle(musb, 0);
break;
case OTG_STATE_B_HOST:
- musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
+ musb->xceiv->otg->state = OTG_STATE_B_WAIT_ACON;
musb->is_active = otg->host->b_hnp_enable;
musb_platform_try_idle(musb, 0);
break;
default:
dev_dbg(musb->controller, "bogus rh suspend? %s\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
} else if (power & MUSB_POWER_SUSPENDM) {
power &= ~MUSB_POWER_SUSPENDM;
@@ -145,7 +145,7 @@
u8 power;
void __iomem *mbase = musb->mregs;
- if (musb->xceiv->state == OTG_STATE_B_IDLE) {
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) {
dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n");
musb->port1_status &= ~USB_PORT_STAT_RESET;
return;
@@ -224,24 +224,24 @@
usb_hcd_poll_rh_status(musb->hcd);
musb->is_active = 0;
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_SUSPEND:
if (otg->host->b_hnp_enable) {
- musb->xceiv->state = OTG_STATE_A_PERIPHERAL;
+ musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL;
musb->g.is_a_peripheral = 1;
break;
}
/* FALLTHROUGH */
case OTG_STATE_A_HOST:
- musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
musb->is_active = 0;
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
break;
default:
dev_dbg(musb->controller, "host disconnect (%s)\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 20fc2a5..763649e 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -65,15 +65,15 @@
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_BCON:
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE) {
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
} else {
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
MUSB_HST_MODE(musb);
}
break;
@@ -90,15 +90,15 @@
musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
usb_hcd_poll_rh_status(musb->hcd);
/* NOTE: it might really be A_WAIT_BCON ... */
- musb->xceiv->state = OTG_STATE_A_HOST;
+ musb->xceiv->otg->state = OTG_STATE_A_HOST;
}
break;
case OTG_STATE_A_HOST:
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (devctl & MUSB_DEVCTL_BDEVICE)
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
else
- musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
default:
break;
}
@@ -116,9 +116,9 @@
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
+ && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
del_timer(&musb_idle_timer);
last_timer = jiffies;
return;
@@ -135,7 +135,7 @@
last_timer = timeout;
dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
(unsigned long)jiffies_to_msecs(timeout - jiffies));
mod_timer(&musb_idle_timer, timeout);
}
@@ -153,7 +153,7 @@
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
- if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+ if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) {
int loops = 100;
/* start the session */
devctl |= MUSB_DEVCTL_SESSION;
@@ -180,7 +180,7 @@
} else {
musb->is_active = 1;
otg->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
}
@@ -192,7 +192,7 @@
*/
otg->default_a = 0;
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
devctl &= ~MUSB_DEVCTL_SESSION;
MUSB_DEV_MODE(musb);
@@ -201,7 +201,7 @@
dev_dbg(musb->controller, "VBUS %s, devctl %02x "
/* otg %3x conf %08x prcm %08x */ "\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
@@ -266,7 +266,7 @@
dev_dbg(dev, "ID GND\n");
otg->default_a = true;
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
musb->xceiv->last_event = USB_EVENT_ID;
if (musb->gadget_driver) {
pm_runtime_get_sync(dev);
@@ -280,7 +280,7 @@
dev_dbg(dev, "VBUS Connect\n");
otg->default_a = false;
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
musb->xceiv->last_event = USB_EVENT_VBUS;
if (musb->gadget_driver)
pm_runtime_get_sync(dev);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 25f02df..69ca92d6 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -415,13 +415,13 @@
spin_lock_irqsave(&musb->lock, flags);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_BCON:
if ((musb->a_wait_bcon != 0)
&& (musb->idle_timeout == 0
|| time_after(jiffies, musb->idle_timeout))) {
dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
}
/* FALLTHROUGH */
case OTG_STATE_A_IDLE:
@@ -474,9 +474,9 @@
/* Never idle if active, or when VBUS timeout is not set as host */
if (musb->is_active || ((musb->a_wait_bcon == 0)
- && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
+ && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
dev_dbg(musb->controller, "%s active, deleting timer\n",
- usb_otg_state_string(musb->xceiv->state));
+ usb_otg_state_string(musb->xceiv->otg->state));
del_timer(&musb_idle_timer);
last_timer = jiffies;
return;
@@ -493,7 +493,7 @@
last_timer = timeout;
dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
(unsigned long)jiffies_to_msecs(timeout - jiffies));
mod_timer(&musb_idle_timer, timeout);
}
@@ -524,7 +524,7 @@
if (is_on) {
timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
otg->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
conf |= TUSB_DEV_CONF_USB_HOST_MODE;
@@ -537,16 +537,16 @@
/* If ID pin is grounded, we want to be a_idle */
otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_VRISE:
case OTG_STATE_A_WAIT_BCON:
- musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
break;
case OTG_STATE_A_WAIT_VFALL:
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
break;
default:
- musb->xceiv->state = OTG_STATE_A_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
}
musb->is_active = 0;
otg->default_a = 1;
@@ -554,7 +554,7 @@
} else {
musb->is_active = 0;
otg->default_a = 0;
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
MUSB_DEV_MODE(musb);
}
@@ -569,7 +569,7 @@
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
dev_dbg(musb->controller, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
musb_readb(musb->mregs, MUSB_DEVCTL),
musb_readl(tbase, TUSB_DEV_OTG_STAT),
conf, prcm);
@@ -668,23 +668,23 @@
if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
dev_dbg(musb->controller, "Forcing disconnect (no interrupt)\n");
- if (musb->xceiv->state != OTG_STATE_B_IDLE) {
+ if (musb->xceiv->otg->state != OTG_STATE_B_IDLE) {
/* INTR_DISCONNECT can hide... */
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
musb->int_usb |= MUSB_INTR_DISCONNECT;
}
musb->is_active = 0;
}
dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
- usb_otg_state_string(musb->xceiv->state), otg_stat);
+ usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
idle_timeout = jiffies + (1 * HZ);
schedule_work(&musb->irq_work);
} else /* A-dev state machine */ {
dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
- usb_otg_state_string(musb->xceiv->state), otg_stat);
+ usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_IDLE:
dev_dbg(musb->controller, "Got SRP, turning on VBUS\n");
musb_platform_set_vbus(musb, 1);
@@ -731,9 +731,9 @@
u8 devctl;
dev_dbg(musb->controller, "%s timer, %03x\n",
- usb_otg_state_string(musb->xceiv->state), otg_stat);
+ usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
- switch (musb->xceiv->state) {
+ switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_VRISE:
/* VBUS has probably been valid for a while now,
* but may well have bounced out of range a bit
@@ -745,7 +745,7 @@
dev_dbg(musb->controller, "devctl %02x\n", devctl);
break;
}
- musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
musb->is_active = 0;
idle_timeout = jiffies
+ msecs_to_jiffies(musb->a_wait_bcon);
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index d0180a7..1d631d5 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -56,7 +56,7 @@
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
if (is_on) {
- if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+ if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) {
/* start the session */
devctl |= MUSB_DEVCTL_SESSION;
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
@@ -76,7 +76,7 @@
} else {
musb->is_active = 1;
musb->xceiv->otg->default_a = 1;
- musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
devctl |= MUSB_DEVCTL_SESSION;
MUSB_HST_MODE(musb);
}
@@ -102,7 +102,7 @@
mdelay(200);
dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
- usb_otg_state_string(musb->xceiv->state),
+ usb_otg_state_string(musb->xceiv->otg->state),
musb_readb(musb->mregs, MUSB_DEVCTL));
}
@@ -112,7 +112,7 @@
struct musb *musb = container_of(nb, struct musb, nb);
dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n",
- event, usb_otg_state_string(musb->xceiv->state));
+ event, usb_otg_state_string(musb->xceiv->otg->state));
switch (event) {
case UX500_MUSB_ID:
@@ -127,7 +127,7 @@
if (is_host_active(musb))
ux500_musb_set_vbus(musb, 0);
else
- musb->xceiv->state = OTG_STATE_B_IDLE;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
break;
default:
dev_dbg(musb->controller, "ID float\n");
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 11ab2c4..2d52501 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -446,7 +446,7 @@
if (event != UX500_MUSB_RIDB)
event = UX500_MUSB_NONE;
/* Fallback to default B_IDLE as nothing is connected. */
- ab->phy.state = OTG_STATE_B_IDLE;
+ ab->phy.otg->state = OTG_STATE_B_IDLE;
break;
case USB_LINK_ACA_RID_C_NM_9540:
@@ -584,7 +584,7 @@
* Fallback to default B_IDLE as nothing
* is connected
*/
- ab->phy.state = OTG_STATE_B_IDLE;
+ ab->phy.otg->state = OTG_STATE_B_IDLE;
break;
case USB_LINK_ACA_RID_C_NM_8540:
@@ -693,7 +693,7 @@
* Fallback to default B_IDLE as nothing
* is connected
*/
- ab->phy.state = OTG_STATE_B_IDLE;
+ ab->phy.otg->state = OTG_STATE_B_IDLE;
break;
case USB_LINK_ACA_RID_C_NM_8505:
@@ -776,7 +776,7 @@
if (event != UX500_MUSB_RIDB)
event = UX500_MUSB_NONE;
/* Fallback to default B_IDLE as nothing is connected */
- ab->phy.state = OTG_STATE_B_IDLE;
+ ab->phy.otg->state = OTG_STATE_B_IDLE;
break;
case USB_LINK_ACA_RID_C_NM_8500:
@@ -1380,7 +1380,7 @@
ab->phy.label = "ab8500";
ab->phy.set_suspend = ab8500_usb_set_suspend;
ab->phy.set_power = ab8500_usb_set_power;
- ab->phy.state = OTG_STATE_UNDEFINED;
+ ab->phy.otg->state = OTG_STATE_UNDEFINED;
otg->phy = &ab->phy;
otg->set_host = ab8500_usb_set_host;
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index f1ea599..15d7a81 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -623,7 +623,7 @@
/* Mini-A cable connected */
struct otg_fsm *fsm = &otg_dev->fsm;
- otg->phy->state = OTG_STATE_UNDEFINED;
+ otg.state = OTG_STATE_UNDEFINED;
fsm->protocol = PROTO_UNDEF;
}
}
@@ -681,7 +681,7 @@
{
if (!fsl_otg_dev)
return -ENODEV;
- if (phy->state == OTG_STATE_B_PERIPHERAL)
+ if (phy->otg.state == OTG_STATE_B_PERIPHERAL)
pr_info("FSL OTG: Draw %d mA\n", mA);
return 0;
@@ -714,7 +714,7 @@
{
struct fsl_otg *otg_dev;
- if (!otg || otg->phy->state != OTG_STATE_B_IDLE)
+ if (!otg || otg.state != OTG_STATE_B_IDLE)
return -ENODEV;
otg_dev = container_of(otg->phy, struct fsl_otg, phy);
@@ -989,10 +989,10 @@
* Also: record initial state of ID pin
*/
if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
- p_otg->phy.state = OTG_STATE_UNDEFINED;
+ p_otg->phy->otg.state = OTG_STATE_UNDEFINED;
p_otg->fsm.id = 1;
} else {
- p_otg->phy.state = OTG_STATE_A_IDLE;
+ p_otg->phy->otg.state = OTG_STATE_A_IDLE;
p_otg->fsm.id = 0;
}
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 7594e50..280a345 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -123,7 +123,7 @@
}
otg->gadget = gadget;
- otg->phy->state = OTG_STATE_B_IDLE;
+ otg->state = OTG_STATE_B_IDLE;
return 0;
}
@@ -225,9 +225,9 @@
nop->phy.dev = nop->dev;
nop->phy.label = "nop-xceiv";
nop->phy.set_suspend = nop_set_suspend;
- nop->phy.state = OTG_STATE_UNDEFINED;
nop->phy.type = type;
+ nop->phy.otg->state = OTG_STATE_UNDEFINED;
nop->phy.otg->phy = &nop->phy;
nop->phy.otg->set_host = nop_set_host;
nop->phy.otg->set_peripheral = nop_set_peripheral;
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index f4b14bd..7a6be3e 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -121,7 +121,7 @@
if (vbus) {
status = USB_EVENT_VBUS;
- gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+ gpio_vbus->phy.otg->state = OTG_STATE_B_PERIPHERAL;
gpio_vbus->phy.last_event = status;
usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
@@ -143,7 +143,7 @@
usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
status = USB_EVENT_NONE;
- gpio_vbus->phy.state = OTG_STATE_B_IDLE;
+ gpio_vbus->phy.otg->state = OTG_STATE_B_IDLE;
gpio_vbus->phy.last_event = status;
atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
@@ -196,7 +196,7 @@
set_vbus_draw(gpio_vbus, 0);
usb_gadget_vbus_disconnect(otg->gadget);
- otg->phy->state = OTG_STATE_UNDEFINED;
+ otg->state = OTG_STATE_UNDEFINED;
otg->gadget = NULL;
return 0;
@@ -218,7 +218,7 @@
gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
- if (phy->state == OTG_STATE_B_PERIPHERAL)
+ if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
set_vbus_draw(gpio_vbus, mA);
return 0;
}
@@ -269,8 +269,8 @@
gpio_vbus->phy.dev = gpio_vbus->dev;
gpio_vbus->phy.set_power = gpio_vbus_set_power;
gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
- gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
+ gpio_vbus->phy.otg->state = OTG_STATE_UNDEFINED;
gpio_vbus->phy.otg->phy = &gpio_vbus->phy;
gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 8eea56d..24f84cb 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -234,7 +234,7 @@
static inline const char *state_name(struct isp1301 *isp)
{
- return usb_otg_state_string(isp->phy.state);
+ return usb_otg_state_string(isp->phy.otg->state);
}
/*-------------------------------------------------------------------------*/
@@ -249,7 +249,7 @@
static void power_down(struct isp1301 *isp)
{
- isp->phy.state = OTG_STATE_UNDEFINED;
+ isp->phy.otg->state = OTG_STATE_UNDEFINED;
// isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
@@ -339,7 +339,7 @@
{
u32 l;
- if (isp->phy.state == OTG_STATE_A_IDLE)
+ if (isp->phy.otg->state == OTG_STATE_A_IDLE)
return;
isp->phy.otg->default_a = 1;
@@ -351,7 +351,7 @@
isp->phy.otg->gadget->is_a_peripheral = 1;
gadget_suspend(isp);
}
- isp->phy.state = OTG_STATE_A_IDLE;
+ isp->phy.otg->state = OTG_STATE_A_IDLE;
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
isp->last_otg_ctrl = l;
@@ -363,7 +363,7 @@
{
u32 l;
- if (isp->phy.state == OTG_STATE_B_IDLE)
+ if (isp->phy.otg->state == OTG_STATE_B_IDLE)
return;
isp->phy.otg->default_a = 0;
@@ -375,7 +375,7 @@
isp->phy.otg->gadget->is_a_peripheral = 0;
gadget_suspend(isp);
}
- isp->phy.state = OTG_STATE_B_IDLE;
+ isp->phy.otg->state = OTG_STATE_B_IDLE;
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
isp->last_otg_ctrl = l;
@@ -474,7 +474,7 @@
default:
break;
}
- if (isp->phy.state == state && !extra)
+ if (isp->phy.otg->state == state && !extra)
return;
pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
usb_otg_state_string(state), fsm, state_name(isp),
@@ -498,23 +498,23 @@
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
- else if (isp->phy.state == OTG_STATE_A_WAIT_VFALL) {
+ else if (isp->phy.otg->state == OTG_STATE_A_WAIT_VFALL) {
a_idle(isp, "vfall");
otg_ctrl &= ~OTG_CTRL_BITS;
}
if (int_src & INTR_VBUS_VLD)
otg_ctrl |= OTG_VBUSVLD;
if (int_src & INTR_ID_GND) { /* default-A */
- if (isp->phy.state == OTG_STATE_B_IDLE
- || isp->phy.state
+ if (isp->phy.otg->state == OTG_STATE_B_IDLE
+ || isp->phy.otg->state
== OTG_STATE_UNDEFINED) {
a_idle(isp, "init");
return;
}
} else { /* default-B */
otg_ctrl |= OTG_ID;
- if (isp->phy.state == OTG_STATE_A_IDLE
- || isp->phy.state == OTG_STATE_UNDEFINED) {
+ if (isp->phy.otg->state == OTG_STATE_A_IDLE
+ || isp->phy.otg->state == OTG_STATE_UNDEFINED) {
b_idle(isp, "init");
return;
}
@@ -548,14 +548,14 @@
isp->last_otg_ctrl = otg_ctrl;
otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_B_IDLE:
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_SRP_INIT:
if (!(otg_ctrl & OTG_PULLUP)) {
// if (otg_ctrl & OTG_B_HNPEN) {
if (isp->phy.otg->gadget->b_hnp_enable) {
- isp->phy.state = OTG_STATE_B_WAIT_ACON;
+ isp->phy.otg->state = OTG_STATE_B_WAIT_ACON;
pr_debug(" --> b_wait_acon\n");
}
goto pulldown;
@@ -585,7 +585,7 @@
if (!(isp->phy.otg->host))
otg_ctrl &= ~OTG_DRV_VBUS;
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_A_SUSPEND:
if (otg_ctrl & OTG_DRV_VBUS) {
set |= OTG1_VBUS_DRV;
@@ -596,7 +596,7 @@
/* FALLTHROUGH */
case OTG_STATE_A_VBUS_ERR:
- isp->phy.state = OTG_STATE_A_WAIT_VFALL;
+ isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
pr_debug(" --> a_wait_vfall\n");
/* FALLTHROUGH */
case OTG_STATE_A_WAIT_VFALL:
@@ -605,7 +605,7 @@
break;
case OTG_STATE_A_IDLE:
if (otg_ctrl & OTG_DRV_VBUS) {
- isp->phy.state = OTG_STATE_A_WAIT_VRISE;
+ isp->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
pr_debug(" --> a_wait_vrise\n");
}
/* FALLTHROUGH */
@@ -625,17 +625,17 @@
if (otg_change & OTG_PULLUP) {
u32 l;
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_B_IDLE:
if (clr & OTG1_DP_PULLUP)
break;
- isp->phy.state = OTG_STATE_B_PERIPHERAL;
+ isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
break;
case OTG_STATE_A_SUSPEND:
if (clr & OTG1_DP_PULLUP)
break;
- isp->phy.state = OTG_STATE_A_PERIPHERAL;
+ isp->phy.otg->state = OTG_STATE_A_PERIPHERAL;
pr_debug(" --> a_peripheral\n");
break;
default:
@@ -673,7 +673,7 @@
* remote wakeup (SRP, normal) using their own timer
* to give "check cable and A-device" messages.
*/
- if (isp->phy.state == OTG_STATE_B_SRP_INIT)
+ if (isp->phy.otg->state == OTG_STATE_B_SRP_INIT)
b_idle(isp, "srp_timeout");
omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
@@ -691,7 +691,7 @@
omap_writel(otg_ctrl, OTG_CTRL);
/* subset of b_peripheral()... */
- isp->phy.state = OTG_STATE_B_PERIPHERAL;
+ isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
@@ -703,7 +703,7 @@
state_name(isp), omap_readl(OTG_CTRL));
isp1301_defer_work(isp, WORK_UPDATE_OTG);
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_A_IDLE:
if (!otg->host)
break;
@@ -734,7 +734,7 @@
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->phy.state = OTG_STATE_A_WAIT_VFALL;
+ isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
@@ -748,7 +748,7 @@
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->phy.state = OTG_STATE_A_VBUS_ERR;
+ isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
@@ -769,7 +769,7 @@
/* role is peripheral */
if (otg_ctrl & OTG_DRIVER_SEL) {
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_A_IDLE:
b_idle(isp, __func__);
break;
@@ -786,18 +786,18 @@
}
if (otg->host) {
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_B_WAIT_ACON:
- isp->phy.state = OTG_STATE_B_HOST;
+ isp->phy.otg->state = OTG_STATE_B_HOST;
pr_debug(" --> b_host\n");
kick = 1;
break;
case OTG_STATE_A_WAIT_BCON:
- isp->phy.state = OTG_STATE_A_HOST;
+ isp->phy.otg->state = OTG_STATE_A_HOST;
pr_debug(" --> a_host\n");
break;
case OTG_STATE_A_PERIPHERAL:
- isp->phy.state = OTG_STATE_A_WAIT_BCON;
+ isp->phy.otg->state = OTG_STATE_A_WAIT_BCON;
pr_debug(" --> a_wait_bcon\n");
break;
default:
@@ -937,7 +937,7 @@
/* UDC driver just set OTG_BSESSVLD */
isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
- isp->phy.state = OTG_STATE_B_PERIPHERAL;
+ isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
dump_regs(isp, "2periph");
#endif
@@ -947,7 +947,7 @@
{
struct usb_otg *otg = isp->phy.otg;
u8 isp_stat, isp_bstat;
- enum usb_otg_state state = isp->phy.state;
+ enum usb_otg_state state = isp->phy.otg->state;
if (stat & INTR_BDIS_ACON)
pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp));
@@ -970,7 +970,7 @@
* when HNP is used.
*/
if (isp_stat & INTR_VBUS_VLD)
- isp->phy.state = OTG_STATE_A_HOST;
+ isp->phy.otg->state = OTG_STATE_A_HOST;
break;
case OTG_STATE_A_WAIT_VFALL:
if (!(isp_stat & INTR_SESS_VLD))
@@ -978,7 +978,7 @@
break;
default:
if (!(isp_stat & INTR_VBUS_VLD))
- isp->phy.state = OTG_STATE_A_VBUS_ERR;
+ isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
break;
}
isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
@@ -1007,7 +1007,7 @@
if (otg->default_a) {
switch (state) {
default:
- isp->phy.state = OTG_STATE_A_WAIT_VFALL;
+ isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
break;
case OTG_STATE_A_WAIT_VFALL:
state = OTG_STATE_A_IDLE;
@@ -1020,7 +1020,7 @@
host_suspend(isp);
isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
MC1_BDIS_ACON_EN);
- isp->phy.state = OTG_STATE_B_IDLE;
+ isp->phy.otg->state = OTG_STATE_B_IDLE;
l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
l &= ~OTG_CTRL_BITS;
omap_writel(l, OTG_CTRL);
@@ -1031,7 +1031,7 @@
}
isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_WAIT_ACON:
case OTG_STATE_B_HOST:
@@ -1071,7 +1071,7 @@
}
}
- if (state != isp->phy.state)
+ if (state != isp->phy.otg->state)
pr_debug(" isp, %s -> %s\n",
usb_otg_state_string(state), state_name(isp));
@@ -1129,10 +1129,10 @@
* skip A_WAIT_VRISE; hc transitions invisibly
* skip A_WAIT_BCON; same.
*/
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_A_WAIT_BCON:
case OTG_STATE_A_WAIT_VRISE:
- isp->phy.state = OTG_STATE_A_HOST;
+ isp->phy.otg->state = OTG_STATE_A_HOST;
pr_debug(" --> a_host\n");
otg_ctrl = omap_readl(OTG_CTRL);
otg_ctrl |= OTG_A_BUSREQ;
@@ -1141,7 +1141,7 @@
omap_writel(otg_ctrl, OTG_CTRL);
break;
case OTG_STATE_B_WAIT_ACON:
- isp->phy.state = OTG_STATE_B_HOST;
+ isp->phy.otg->state = OTG_STATE_B_HOST;
pr_debug(" --> b_host (acon)\n");
break;
case OTG_STATE_B_HOST:
@@ -1368,7 +1368,7 @@
}
power_up(isp);
- isp->phy.state = OTG_STATE_B_IDLE;
+ isp->phy.otg->state = OTG_STATE_B_IDLE;
if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
@@ -1403,7 +1403,7 @@
{
if (!the_transceiver)
return -ENODEV;
- if (dev->state == OTG_STATE_B_PERIPHERAL)
+ if (dev->otg->state == OTG_STATE_B_PERIPHERAL)
enable_vbus_draw(the_transceiver, mA);
return 0;
}
@@ -1414,7 +1414,7 @@
struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
u32 otg_ctrl;
- if (isp != the_transceiver || isp->phy.state != OTG_STATE_B_IDLE)
+ if (isp != the_transceiver || isp->phy.otg->state != OTG_STATE_B_IDLE)
return -ENODEV;
otg_ctrl = omap_readl(OTG_CTRL);
@@ -1424,7 +1424,7 @@
otg_ctrl |= OTG_B_BUSREQ;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->phy.state = OTG_STATE_B_SRP_INIT;
+ isp->phy.otg->state = OTG_STATE_B_SRP_INIT;
pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
omap_readl(OTG_CTRL));
@@ -1452,9 +1452,9 @@
/* We want hardware to manage most HNP protocol timings.
* So do this part as early as possible...
*/
- switch (isp->phy.state) {
+ switch (isp->phy.otg->state) {
case OTG_STATE_B_HOST:
- isp->phy.state = OTG_STATE_B_PERIPHERAL;
+ isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
/* caller will suspend next */
break;
case OTG_STATE_A_HOST:
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 471e69d..18015b7 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -721,11 +721,11 @@
}
if (!host) {
- if (otg->phy->state == OTG_STATE_A_HOST) {
+ if (otg->state == OTG_STATE_A_HOST) {
pm_runtime_get_sync(otg->phy->dev);
msm_otg_start_host(otg->phy, 0);
otg->host = NULL;
- otg->phy->state = OTG_STATE_UNDEFINED;
+ otg->state = OTG_STATE_UNDEFINED;
schedule_work(&motg->sm_work);
} else {
otg->host = NULL;
@@ -794,11 +794,11 @@
}
if (!gadget) {
- if (otg->phy->state == OTG_STATE_B_PERIPHERAL) {
+ if (otg->state == OTG_STATE_B_PERIPHERAL) {
pm_runtime_get_sync(otg->phy->dev);
msm_otg_start_peripheral(otg->phy, 0);
otg->gadget = NULL;
- otg->phy->state = OTG_STATE_UNDEFINED;
+ otg->state = OTG_STATE_UNDEFINED;
schedule_work(&motg->sm_work);
} else {
otg->gadget = NULL;
@@ -1170,12 +1170,12 @@
struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
struct usb_otg *otg = motg->phy.otg;
- switch (otg->phy->state) {
+ switch (otg->state) {
case OTG_STATE_UNDEFINED:
dev_dbg(otg->phy->dev, "OTG_STATE_UNDEFINED state\n");
msm_otg_reset(otg->phy);
msm_otg_init_sm(motg);
- otg->phy->state = OTG_STATE_B_IDLE;
+ otg->state = OTG_STATE_B_IDLE;
/* FALL THROUGH */
case OTG_STATE_B_IDLE:
dev_dbg(otg->phy->dev, "OTG_STATE_B_IDLE state\n");
@@ -1183,7 +1183,7 @@
/* disable BSV bit */
writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
msm_otg_start_host(otg->phy, 1);
- otg->phy->state = OTG_STATE_A_HOST;
+ otg->state = OTG_STATE_A_HOST;
} else if (test_bit(B_SESS_VLD, &motg->inputs)) {
switch (motg->chg_state) {
case USB_CHG_STATE_UNDEFINED:
@@ -1199,13 +1199,13 @@
msm_otg_notify_charger(motg,
IDEV_CHG_MAX);
msm_otg_start_peripheral(otg->phy, 1);
- otg->phy->state
+ otg->state
= OTG_STATE_B_PERIPHERAL;
break;
case USB_SDP_CHARGER:
msm_otg_notify_charger(motg, IUNIT);
msm_otg_start_peripheral(otg->phy, 1);
- otg->phy->state
+ otg->state
= OTG_STATE_B_PERIPHERAL;
break;
default:
@@ -1230,7 +1230,7 @@
motg->chg_type = USB_INVALID_CHARGER;
}
- if (otg->phy->state == OTG_STATE_B_IDLE)
+ if (otg->state == OTG_STATE_B_IDLE)
pm_runtime_put_sync(otg->phy->dev);
break;
case OTG_STATE_B_PERIPHERAL:
@@ -1241,7 +1241,7 @@
msm_otg_start_peripheral(otg->phy, 0);
motg->chg_state = USB_CHG_STATE_UNDEFINED;
motg->chg_type = USB_INVALID_CHARGER;
- otg->phy->state = OTG_STATE_B_IDLE;
+ otg->state = OTG_STATE_B_IDLE;
msm_otg_reset(otg->phy);
schedule_work(w);
}
@@ -1250,7 +1250,7 @@
dev_dbg(otg->phy->dev, "OTG_STATE_A_HOST state\n");
if (test_bit(ID, &motg->inputs)) {
msm_otg_start_host(otg->phy, 0);
- otg->phy->state = OTG_STATE_B_IDLE;
+ otg->state = OTG_STATE_B_IDLE;
msm_otg_reset(otg->phy);
schedule_work(w);
}
@@ -1303,7 +1303,7 @@
struct msm_otg *motg = s->private;
struct usb_otg *otg = motg->phy.otg;
- switch (otg->phy->state) {
+ switch (otg->state) {
case OTG_STATE_A_HOST:
seq_puts(s, "host\n");
break;
@@ -1353,7 +1353,7 @@
switch (req_mode) {
case USB_DR_MODE_UNKNOWN:
- switch (otg->phy->state) {
+ switch (otg->state) {
case OTG_STATE_A_HOST:
case OTG_STATE_B_PERIPHERAL:
set_bit(ID, &motg->inputs);
@@ -1364,7 +1364,7 @@
}
break;
case USB_DR_MODE_PERIPHERAL:
- switch (otg->phy->state) {
+ switch (otg->state) {
case OTG_STATE_B_IDLE:
case OTG_STATE_A_HOST:
set_bit(ID, &motg->inputs);
@@ -1375,7 +1375,7 @@
}
break;
case USB_DR_MODE_HOST:
- switch (otg->phy->state) {
+ switch (otg->state) {
case OTG_STATE_B_IDLE:
case OTG_STATE_B_PERIPHERAL:
clear_bit(ID, &motg->inputs);
@@ -1769,7 +1769,7 @@
* This 1 sec delay also prevents entering into LPM immediately
* after asynchronous interrupt.
*/
- if (otg->phy->state != OTG_STATE_UNDEFINED)
+ if (otg->state != OTG_STATE_UNDEFINED)
pm_schedule_suspend(dev, 1000);
return -EAGAIN;
diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c
index c9517d8..ee87aa7 100644
--- a/drivers/usb/phy/phy-mv-usb.c
+++ b/drivers/usb/phy/phy-mv-usb.c
@@ -339,68 +339,68 @@
{
struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
struct usb_phy *phy = &mvotg->phy;
- int old_state = phy->state;
+ int old_state = mvotg->phy.otg->state;
switch (old_state) {
case OTG_STATE_UNDEFINED:
- phy->state = OTG_STATE_B_IDLE;
+ mvotg->phy.otg->state = OTG_STATE_B_IDLE;
/* FALL THROUGH */
case OTG_STATE_B_IDLE:
if (otg_ctrl->id == 0)
- phy->state = OTG_STATE_A_IDLE;
+ mvotg->phy.otg->state = OTG_STATE_A_IDLE;
else if (otg_ctrl->b_sess_vld)
- phy->state = OTG_STATE_B_PERIPHERAL;
+ mvotg->phy.otg->state = OTG_STATE_B_PERIPHERAL;
break;
case OTG_STATE_B_PERIPHERAL:
if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0)
- phy->state = OTG_STATE_B_IDLE;
+ mvotg->phy.otg->state = OTG_STATE_B_IDLE;
break;
case OTG_STATE_A_IDLE:
if (otg_ctrl->id)
- phy->state = OTG_STATE_B_IDLE;
+ mvotg->phy.otg->state = OTG_STATE_B_IDLE;
else if (!(otg_ctrl->a_bus_drop) &&
(otg_ctrl->a_bus_req || otg_ctrl->a_srp_det))
- phy->state = OTG_STATE_A_WAIT_VRISE;
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
break;
case OTG_STATE_A_WAIT_VRISE:
if (otg_ctrl->a_vbus_vld)
- phy->state = OTG_STATE_A_WAIT_BCON;
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_BCON;
break;
case OTG_STATE_A_WAIT_BCON:
if (otg_ctrl->id || otg_ctrl->a_bus_drop
|| otg_ctrl->a_wait_bcon_timeout) {
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
- phy->state = OTG_STATE_A_WAIT_VFALL;
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
otg_ctrl->a_bus_req = 0;
} else if (!otg_ctrl->a_vbus_vld) {
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
- phy->state = OTG_STATE_A_VBUS_ERR;
+ mvotg->phy.otg->state = OTG_STATE_A_VBUS_ERR;
} else if (otg_ctrl->b_conn) {
mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
- phy->state = OTG_STATE_A_HOST;
+ mvotg->phy.otg->state = OTG_STATE_A_HOST;
}
break;
case OTG_STATE_A_HOST:
if (otg_ctrl->id || !otg_ctrl->b_conn
|| otg_ctrl->a_bus_drop)
- phy->state = OTG_STATE_A_WAIT_BCON;
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_BCON;
else if (!otg_ctrl->a_vbus_vld)
- phy->state = OTG_STATE_A_VBUS_ERR;
+ mvotg->phy.otg->state = OTG_STATE_A_VBUS_ERR;
break;
case OTG_STATE_A_WAIT_VFALL:
if (otg_ctrl->id
|| (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld)
|| otg_ctrl->a_bus_req)
- phy->state = OTG_STATE_A_IDLE;
+ mvotg->phy.otg->state = OTG_STATE_A_IDLE;
break;
case OTG_STATE_A_VBUS_ERR:
if (otg_ctrl->id || otg_ctrl->a_clr_err
|| otg_ctrl->a_bus_drop) {
otg_ctrl->a_clr_err = 0;
- phy->state = OTG_STATE_A_WAIT_VFALL;
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
}
break;
default:
@@ -420,8 +420,8 @@
run:
/* work queue is single thread, or we need spin_lock to protect */
phy = &mvotg->phy;
- otg = phy->otg;
- old_state = phy->state;
+ otg = mvotg->phy.otg;
+ old_state = otg->state;
if (!mvotg->active)
return;
@@ -429,12 +429,12 @@
mv_otg_update_inputs(mvotg);
mv_otg_update_state(mvotg);
- if (old_state != phy->state) {
+ if (old_state != mvotg->phy.otg->state) {
dev_info(&mvotg->pdev->dev, "change from state %s to %s\n",
state_string[old_state],
- state_string[phy->state]);
+ state_string[mvotg->phy.otg->state]);
- switch (phy->state) {
+ switch (mvotg->phy.otg->state) {
case OTG_STATE_B_IDLE:
otg->default_a = 0;
if (old_state == OTG_STATE_B_PERIPHERAL)
@@ -545,8 +545,8 @@
return -1;
/* We will use this interface to change to A device */
- if (mvotg->phy.state != OTG_STATE_B_IDLE
- && mvotg->phy.state != OTG_STATE_A_IDLE)
+ if (mvotg->phy.otg->state != OTG_STATE_B_IDLE
+ && mvotg->phy.otg->state != OTG_STATE_A_IDLE)
return -1;
/* The clock may disabled and we need to set irq for ID detected */
@@ -715,9 +715,9 @@
mvotg->phy.dev = &pdev->dev;
mvotg->phy.otg = otg;
mvotg->phy.label = driver_name;
- mvotg->phy.state = OTG_STATE_UNDEFINED;
otg->phy = &mvotg->phy;
+ otg->state = OTG_STATE_UNDEFINED;
otg->set_host = mv_otg_set_host;
otg->set_peripheral = mv_otg_set_peripheral;
otg->set_vbus = mv_otg_set_vbus;
diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index cc61ee4..04ece53 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -81,33 +81,33 @@
reg = retu_read(rdev, TAHVO_REG_IDSR);
if (reg & TAHVO_STAT_VBUS) {
- switch (tu->phy.state) {
+ switch (tu->phy.otg->state) {
case OTG_STATE_B_IDLE:
/* Enable the gadget driver */
if (tu->phy.otg->gadget)
usb_gadget_vbus_connect(tu->phy.otg->gadget);
- tu->phy.state = OTG_STATE_B_PERIPHERAL;
+ tu->phy.otg->state = OTG_STATE_B_PERIPHERAL;
break;
case OTG_STATE_A_IDLE:
/*
* Session is now valid assuming the USB hub is driving
* Vbus.
*/
- tu->phy.state = OTG_STATE_A_HOST;
+ tu->phy.otg->state = OTG_STATE_A_HOST;
break;
default:
break;
}
dev_info(&tu->pt_dev->dev, "USB cable connected\n");
} else {
- switch (tu->phy.state) {
+ switch (tu->phy.otg->state) {
case OTG_STATE_B_PERIPHERAL:
if (tu->phy.otg->gadget)
usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
- tu->phy.state = OTG_STATE_B_IDLE;
+ tu->phy.otg->state = OTG_STATE_B_IDLE;
break;
case OTG_STATE_A_HOST:
- tu->phy.state = OTG_STATE_A_IDLE;
+ tu->phy.otg->state = OTG_STATE_A_IDLE;
break;
default:
break;
@@ -132,14 +132,14 @@
/* Power up the transceiver in USB host mode */
retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
USBR_MASTER_SW2 | USBR_MASTER_SW1);
- tu->phy.state = OTG_STATE_A_IDLE;
+ tu->phy.otg->state = OTG_STATE_A_IDLE;
check_vbus_state(tu);
}
static void tahvo_usb_stop_host(struct tahvo_usb *tu)
{
- tu->phy.state = OTG_STATE_A_IDLE;
+ tu->phy.otg->state = OTG_STATE_A_IDLE;
}
static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
@@ -151,7 +151,7 @@
/* Power up transceiver and set it in USB peripheral mode */
retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
USBR_NSUSPEND | USBR_SLAVE_SW);
- tu->phy.state = OTG_STATE_B_IDLE;
+ tu->phy.otg->state = OTG_STATE_B_IDLE;
check_vbus_state(tu);
}
@@ -160,7 +160,7 @@
{
if (tu->phy.otg->gadget)
usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
- tu->phy.state = OTG_STATE_B_IDLE;
+ tu->phy.otg->state = OTG_STATE_B_IDLE;
}
static void tahvo_usb_power_off(struct tahvo_usb *tu)
@@ -173,7 +173,7 @@
/* Power off transceiver */
retu_write(rdev, TAHVO_REG_USBR, 0);
- tu->phy.state = OTG_STATE_UNDEFINED;
+ tu->phy.otg->state = OTG_STATE_UNDEFINED;
}
static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
@@ -379,7 +379,7 @@
/* Create OTG interface */
tahvo_usb_power_off(tu);
tu->phy.dev = &pdev->dev;
- tu->phy.state = OTG_STATE_UNDEFINED;
+ tu->phy.otg->state = OTG_STATE_UNDEFINED;
tu->phy.label = DRIVER_NAME;
tu->phy.set_suspend = tahvo_usb_set_suspend;