[POWERPC] Replace remaining __FUNCTION__ occurrences

__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 3223acb..bcf88e6 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -148,57 +148,57 @@
 
 	/* check if the UCC port number is in range. */
 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
 		return -EINVAL;
 	}
 
 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
 		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
-			__FUNCTION__);
+			__func__);
 		return -EINVAL;
 	}
 
 	/* Validate Virtual Fifo register values */
 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
-		printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfs is too small\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
 	if (!uccf) {
 		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__FUNCTION__);
+			__func__);
 		return -ENOMEM;
 	}
 
@@ -207,7 +207,7 @@
 	/* Set the PHY base address */
 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -230,7 +230,7 @@
 	/* Set UCC to fast type */
 	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
 	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
 		ucc_fast_free(uccf);
 		return ret;
 	}
@@ -270,7 +270,7 @@
 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
-			__FUNCTION__);
+			__func__);
 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -283,7 +283,7 @@
 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
-			__FUNCTION__);
+			__func__);
 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -314,7 +314,7 @@
 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
 					COMM_DIR_RX)) {
 			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_fast_free(uccf);
 			return -EINVAL;
 		}
@@ -323,7 +323,7 @@
 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
 					COMM_DIR_TX)) {
 			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_fast_free(uccf);
 			return -EINVAL;
 		}