ethernet/arc/arc_emac - Add new driver
Driver for non-standard on-chip ethernet device ARC EMAC 10/100,
instantiated in some legacy ARC (Synopsys) FPGA Boards such as
ARCAngel4/ML50x.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Joe Perches <joe@perches.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Mischa Jonker <mjonker@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Florian Fainelli <florian@openwrt.org>
Cc: David Laight <david.laight@aculab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h
new file mode 100644
index 0000000..dc08678
--- /dev/null
+++ b/drivers/net/ethernet/arc/emac.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2004-2013 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Registers and bits definitions of ARC EMAC
+ */
+
+#ifndef ARC_EMAC_H
+#define ARC_EMAC_H
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+/* STATUS and ENABLE Register bit masks */
+#define TXINT_MASK (1<<0) /* Transmit interrupt */
+#define RXINT_MASK (1<<1) /* Receive interrupt */
+#define ERR_MASK (1<<2) /* Error interrupt */
+#define TXCH_MASK (1<<3) /* Transmit chaining error interrupt */
+#define MSER_MASK (1<<4) /* Missed packet counter error */
+#define RXCR_MASK (1<<8) /* RXCRCERR counter rolled over */
+#define RXFR_MASK (1<<9) /* RXFRAMEERR counter rolled over */
+#define RXFL_MASK (1<<10) /* RXOFLOWERR counter rolled over */
+#define MDIO_MASK (1<<12) /* MDIO complete interrupt */
+#define TXPL_MASK (1<<31) /* Force polling of BD by EMAC */
+
+/* CONTROL Register bit masks */
+#define EN_MASK (1<<0) /* VMAC enable */
+#define TXRN_MASK (1<<3) /* TX enable */
+#define RXRN_MASK (1<<4) /* RX enable */
+#define DSBC_MASK (1<<8) /* Disable receive broadcast */
+#define ENFL_MASK (1<<10) /* Enable Full-duplex */
+#define PROM_MASK (1<<11) /* Promiscuous mode */
+
+/* Buffer descriptor INFO bit masks */
+#define OWN_MASK (1<<31) /* 0-CPU owns buffer, 1-EMAC owns buffer */
+#define FIRST_MASK (1<<16) /* First buffer in chain */
+#define LAST_MASK (1<<17) /* Last buffer in chain */
+#define LEN_MASK 0x000007FF /* last 11 bits */
+#define CRLS (1<<21)
+#define DEFR (1<<22)
+#define DROP (1<<23)
+#define RTRY (1<<24)
+#define LTCL (1<<28)
+#define UFLO (1<<29)
+
+#define FOR_EMAC OWN_MASK
+#define FOR_CPU 0
+
+/* ARC EMAC register set combines entries for MAC and MDIO */
+enum {
+ R_ID = 0,
+ R_STATUS,
+ R_ENABLE,
+ R_CTRL,
+ R_POLLRATE,
+ R_RXERR,
+ R_MISS,
+ R_TX_RING,
+ R_RX_RING,
+ R_ADDRL,
+ R_ADDRH,
+ R_LAFL,
+ R_LAFH,
+ R_MDIO,
+};
+
+#define TX_TIMEOUT (400*HZ/1000) /* Transmission timeout */
+
+#define ARC_EMAC_NAPI_WEIGHT 40 /* Workload for NAPI */
+
+#define EMAC_BUFFER_SIZE 1536 /* EMAC buffer size */
+
+/**
+ * struct arc_emac_bd - EMAC buffer descriptor (BD).
+ *
+ * @info: Contains status information on the buffer itself.
+ * @data: 32-bit byte addressable pointer to the packet data.
+ */
+struct arc_emac_bd {
+ __le32 info;
+ dma_addr_t data;
+};
+
+/* Number of Rx/Tx BD's */
+#define RX_BD_NUM 128
+#define TX_BD_NUM 128
+
+#define RX_RING_SZ (RX_BD_NUM * sizeof(struct arc_emac_bd))
+#define TX_RING_SZ (TX_BD_NUM * sizeof(struct arc_emac_bd))
+
+/**
+ * struct buffer_state - Stores Rx/Tx buffer state.
+ * @sk_buff: Pointer to socket buffer.
+ * @addr: Start address of DMA-mapped memory region.
+ * @len: Length of DMA-mapped memory region.
+ */
+struct buffer_state {
+ struct sk_buff *skb;
+ DEFINE_DMA_UNMAP_ADDR(addr);
+ DEFINE_DMA_UNMAP_LEN(len);
+};
+
+/**
+ * struct arc_emac_priv - Storage of EMAC's private information.
+ * @dev: Pointer to the current device.
+ * @ndev: Pointer to the current network device.
+ * @phy_dev: Pointer to attached PHY device.
+ * @bus: Pointer to the current MII bus.
+ * @regs: Base address of EMAC memory-mapped control registers.
+ * @napi: Structure for NAPI.
+ * @stats: Network device statistics.
+ * @rxbd: Pointer to Rx BD ring.
+ * @txbd: Pointer to Tx BD ring.
+ * @rxbd_dma: DMA handle for Rx BD ring.
+ * @txbd_dma: DMA handle for Tx BD ring.
+ * @rx_buff: Storage for Rx buffers states.
+ * @tx_buff: Storage for Tx buffers states.
+ * @txbd_curr: Index of Tx BD to use on the next "ndo_start_xmit".
+ * @txbd_dirty: Index of Tx BD to free on the next Tx interrupt.
+ * @last_rx_bd: Index of the last Rx BD we've got from EMAC.
+ * @link: PHY's last seen link state.
+ * @duplex: PHY's last set duplex mode.
+ * @speed: PHY's last set speed.
+ * @max_speed: Maximum supported by current system network data-rate.
+ */
+struct arc_emac_priv {
+ /* Devices */
+ struct device *dev;
+ struct net_device *ndev;
+ struct phy_device *phy_dev;
+ struct mii_bus *bus;
+
+ void __iomem *regs;
+
+ struct napi_struct napi;
+ struct net_device_stats stats;
+
+ struct arc_emac_bd *rxbd;
+ struct arc_emac_bd *txbd;
+
+ dma_addr_t rxbd_dma;
+ dma_addr_t txbd_dma;
+
+ struct buffer_state rx_buff[RX_BD_NUM];
+ struct buffer_state tx_buff[TX_BD_NUM];
+ unsigned int txbd_curr;
+ unsigned int txbd_dirty;
+
+ unsigned int last_rx_bd;
+
+ unsigned int link;
+ unsigned int duplex;
+ unsigned int speed;
+ unsigned int max_speed;
+};
+
+/**
+ * arc_reg_set - Sets EMAC register with provided value.
+ * @priv: Pointer to ARC EMAC private data structure.
+ * @reg: Register offset from base address.
+ * @value: Value to set in register.
+ */
+static inline void arc_reg_set(struct arc_emac_priv *priv, int reg, int value)
+{
+ iowrite32(value, priv->regs + reg * sizeof(int));
+}
+
+/**
+ * arc_reg_get - Gets value of specified EMAC register.
+ * @priv: Pointer to ARC EMAC private data structure.
+ * @reg: Register offset from base address.
+ *
+ * returns: Value of requested register.
+ */
+static inline unsigned int arc_reg_get(struct arc_emac_priv *priv, int reg)
+{
+ return ioread32(priv->regs + reg * sizeof(int));
+}
+
+/**
+ * arc_reg_or - Applies mask to specified EMAC register - ("reg" | "mask").
+ * @priv: Pointer to ARC EMAC private data structure.
+ * @reg: Register offset from base address.
+ * @mask: Mask to apply to specified register.
+ *
+ * This function reads initial register value, then applies provided mask
+ * to it and then writes register back.
+ */
+static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
+{
+ unsigned int value = arc_reg_get(priv, reg);
+ arc_reg_set(priv, reg, value | mask);
+}
+
+/**
+ * arc_reg_clr - Applies mask to specified EMAC register - ("reg" & ~"mask").
+ * @priv: Pointer to ARC EMAC private data structure.
+ * @reg: Register offset from base address.
+ * @mask: Mask to apply to specified register.
+ *
+ * This function reads initial register value, then applies provided mask
+ * to it and then writes register back.
+ */
+static inline void arc_reg_clr(struct arc_emac_priv *priv, int reg, int mask)
+{
+ unsigned int value = arc_reg_get(priv, reg);
+ arc_reg_set(priv, reg, value & ~mask);
+}
+
+int arc_mdio_probe(struct platform_device *pdev, struct arc_emac_priv *priv);
+int arc_mdio_remove(struct arc_emac_priv *priv);
+
+#endif /* ARC_EMAC_H */