iwlwifi: set hw parameters based on device type
Separate the hw_set_hw_params() function to per device based; different
devices can have different hardware parameters set, when separate the
function based on device type can avoid mistakes, give more flexibilities and
easier to read.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 7da23d3..c492650 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -176,24 +176,56 @@
/* Set initial sensitivity parameters */
/* Set initial calibration set */
priv->hw_params.sens = &iwl6000_sensitivity;
- switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
- case CSR_HW_REV_TYPE_6x50:
- priv->hw_params.calib_init_cfg =
- BIT(IWL_CALIB_XTAL) |
- BIT(IWL_CALIB_DC) |
- BIT(IWL_CALIB_LO) |
- BIT(IWL_CALIB_TX_IQ) |
- BIT(IWL_CALIB_BASE_BAND);
+ priv->hw_params.calib_init_cfg =
+ BIT(IWL_CALIB_XTAL) |
+ BIT(IWL_CALIB_LO) |
+ BIT(IWL_CALIB_TX_IQ) |
+ BIT(IWL_CALIB_BASE_BAND);
- break;
- default:
- priv->hw_params.calib_init_cfg =
- BIT(IWL_CALIB_XTAL) |
- BIT(IWL_CALIB_LO) |
- BIT(IWL_CALIB_TX_IQ) |
- BIT(IWL_CALIB_BASE_BAND);
- break;
- }
+ return 0;
+}
+
+static int iwl6050_hw_set_hw_params(struct iwl_priv *priv)
+{
+ if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+ priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+ priv->cfg->num_of_queues =
+ priv->cfg->mod_params->num_of_queues;
+
+ priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
+ priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
+ priv->hw_params.scd_bc_tbls_size =
+ priv->cfg->num_of_queues *
+ sizeof(struct iwlagn_scd_bc_tbl);
+ priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
+ priv->hw_params.max_stations = IWL5000_STATION_COUNT;
+ priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
+
+ priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
+ priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
+
+ priv->hw_params.max_bsm_size = 0;
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ BIT(IEEE80211_BAND_5GHZ);
+ priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+ priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+ priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+ priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+ priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
+
+ if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+ priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
+
+ /* Set initial sensitivity parameters */
+ /* Set initial calibration set */
+ priv->hw_params.sens = &iwl6000_sensitivity;
+ priv->hw_params.calib_init_cfg =
+ BIT(IWL_CALIB_XTAL) |
+ BIT(IWL_CALIB_DC) |
+ BIT(IWL_CALIB_LO) |
+ BIT(IWL_CALIB_TX_IQ) |
+ BIT(IWL_CALIB_BASE_BAND);
return 0;
}
@@ -304,7 +336,7 @@
};
static struct iwl_lib_ops iwl6050_lib = {
- .set_hw_params = iwl6000_hw_set_hw_params,
+ .set_hw_params = iwl6050_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwlagn_txq_set_sched,