rtlwifi: rtl8192c: rtl8192ce: rtl8192cu: rtl8192de: rtl8723ae: Add changes required by adding rtl81988ee
This patch combines the remaining changes in the rtlwifi family to handle
the addition of rtl8188ee. A number of these changes eliminate some CamelCase
variable names, and other shorten common variable names so that long lines
in the new driver could be shortened.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: jcheung@suse.com
Cc: machen@suse.com
Cc: mmarek@suse.cz
Cc: zhiyuan_yang@realsil.com.cn
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/dm.c b/drivers/net/wireless/rtlwifi/rtl8192se/dm.c
index e2a0faa..b3a2d5e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/dm.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/dm.c
@@ -472,13 +472,13 @@
digtable->back_val = DM_DIG_BACKOFF;
if ((digtable->rssi_val + 10 - digtable->back_val) >
- digtable->rx_gain_range_max)
+ digtable->rx_gain_max)
digtable->cur_igvalue =
- digtable->rx_gain_range_max;
+ digtable->rx_gain_max;
else if ((digtable->rssi_val + 10 - digtable->back_val)
- < digtable->rx_gain_range_min)
+ < digtable->rx_gain_min)
digtable->cur_igvalue =
- digtable->rx_gain_range_min;
+ digtable->rx_gain_min;
else
digtable->cur_igvalue = digtable->rssi_val + 10
- digtable->back_val;
@@ -490,7 +490,7 @@
if (falsealm_cnt->cnt_all > 16000)
digtable->cur_igvalue =
- digtable->rx_gain_range_max;
+ digtable->rx_gain_max;
/* connected -> connected or disconnected -> disconnected */
} else {
/* Firmware control DIG, do nothing in driver dm */
@@ -692,9 +692,9 @@
/* for dig debug rssi value */
digtable->rssi_val = 50;
digtable->back_val = DM_DIG_BACKOFF;
- digtable->rx_gain_range_max = DM_DIG_MAX;
+ digtable->rx_gain_max = DM_DIG_MAX;
- digtable->rx_gain_range_min = DM_DIG_MIN;
+ digtable->rx_gain_min = DM_DIG_MIN;
digtable->backoffval_range_max = DM_DIG_BACKOFF_MAX;
digtable->backoffval_range_min = DM_DIG_BACKOFF_MIN;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index a4f41b1..4f46178 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -1791,7 +1791,7 @@
}
for (i = 0; i < 14; i++) {
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n",
rf_path, i,
rtlefuse->txpwrlevel_cck[rf_path][i],
@@ -1828,11 +1828,11 @@
((rtlefuse->eeprom_pwrgroup[rf_path][index] &
0xf0) >> 4);
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-%d pwrgroup_ht20[%d] = 0x%x\n",
rf_path, i,
rtlefuse->pwrgroup_ht20[rf_path][i]);
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-%d pwrgroup_ht40[%d] = 0x%x\n",
rf_path, i,
rtlefuse->pwrgroup_ht40[rf_path][i]);
@@ -1887,27 +1887,27 @@
rtlefuse->eeprom_regulatory =
(hwinfo[EEPROM_REGULATORY] & 0x1);
}
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory);
for (i = 0; i < 14; i++)
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-A Ht20 to HT40 Diff[%d] = 0x%x\n",
i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]);
for (i = 0; i < 14; i++)
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-A Legacy to Ht40 Diff[%d] = 0x%x\n",
i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]);
for (i = 0; i < 14; i++)
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-B Ht20 to HT40 Diff[%d] = 0x%x\n",
i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]);
for (i = 0; i < 14; i++)
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"RF-B Legacy to HT40 Diff[%d] = 0x%x\n",
i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]);
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"TxPwrSafetyFlag = %d\n", rtlefuse->txpwr_safetyflag);
/* Read RF-indication and Tx Power gain
@@ -1917,7 +1917,7 @@
rtlefuse->legacy_httxpowerdiff =
rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][0];
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"TxPowerDiff = %#x\n", rtlefuse->eeprom_txpowerdiff);
/* Get TSSI value for each path. */
@@ -1926,7 +1926,7 @@
usvalue = hwinfo[EEPROM_TSSI_B];
rtlefuse->eeprom_tssi[RF90_PATH_B] = (u8)(usvalue & 0xff);
- RTPRINT(rtlpriv, FINIT, INIT_TxPower, "TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, "TSSI_A = 0x%x, TSSI_B = 0x%x\n",
rtlefuse->eeprom_tssi[RF90_PATH_A],
rtlefuse->eeprom_tssi[RF90_PATH_B]);
@@ -1934,7 +1934,7 @@
/* and read ThermalMeter from EEPROM */
tempval = hwinfo[EEPROM_THERMALMETER];
rtlefuse->eeprom_thermalmeter = tempval;
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter);
/* ThermalMeter, BIT(0)~3 for RFIC1, BIT(4)~7 for RFIC2 */
@@ -1951,7 +1951,7 @@
/* Version ID, Channel plan */
rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
rtlefuse->txpwr_fromeprom = true;
- RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+ RTPRINT(rtlpriv, FINIT, INIT_TXPOWER,
"EEPROM ChannelPlan = 0x%4x\n", rtlefuse->eeprom_channelplan);
/* Read Customer ID or Board Type!!! */
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index 2c115b0..2e8e6f8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -367,7 +367,7 @@
.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
- .maps[RTL_IMR_BcnInt] = IMR_BCNINT,
+ .maps[RTL_IMR_BCNINT] = IMR_BCNINT,
.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
.maps[RTL_IMR_RDU] = IMR_RDU,
.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,