usb: dwc3: pci: add dr-mode for Intel dwc3
It's know that Intel's SoCs' dwc3 integration is
peripheral-only since Intel implements its own
portmux for role-swapping. In order to prevent dwc3
from ever registering and XHCI platform_device,
let's just set dr-mode to peripheral-only on Intel
SoCs.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 6bc4c2b..45f5a23 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -76,33 +76,45 @@
return platform_device_add_properties(dwc3, properties);
}
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
- struct gpio_desc *gpio;
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+ int ret;
- acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
- acpi_dwc3_byt_gpios);
+ struct property_entry properties[] = {
+ PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
+ { }
+ };
- /*
- * These GPIOs will turn on the USB2 PHY. Note that we have to
- * put the gpio descriptors again here because the phy driver
- * might want to grab them, too.
- */
- gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
- if (IS_ERR(gpio))
- return PTR_ERR(gpio);
+ ret = platform_device_add_properties(dwc3, properties);
+ if (ret < 0)
+ return ret;
- gpiod_set_value_cansleep(gpio, 1);
- gpiod_put(gpio);
+ if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
+ struct gpio_desc *gpio;
- gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(gpio))
- return PTR_ERR(gpio);
+ acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+ acpi_dwc3_byt_gpios);
- if (gpio) {
+ /*
+ * These GPIOs will turn on the USB2 PHY. Note that we have to
+ * put the gpio descriptors again here because the phy driver
+ * might want to grab them, too.
+ */
+ gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
- usleep_range(10000, 11000);
+
+ gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+
+ if (gpio) {
+ gpiod_set_value_cansleep(gpio, 1);
+ gpiod_put(gpio);
+ usleep_range(10000, 11000);
+ }
}
}