USB: musb: fix the nop registration for OMAP3EVM
OMAP3EVM uses ISP1504 phy which doesn't require any programming and
thus has to use NOP otg transceiver.
Cleanups being done:
- Remove unwanted code in usb-musb.c file
- Register NOP in OMAP3EVM board file using
usb_nop_xceiv_register().
- Select NOP_USB_XCEIV for OMAP3EVM boards.
- Don't enable TWL4030_USB in omap3_evm_defconfig
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index 28be17f..d5ff477 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -1107,7 +1107,7 @@
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_TWL4030_USB is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d3cc145..cf3dd77 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -25,6 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
+#include <linux/usb/otg.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -307,6 +308,10 @@
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
+#ifdef CONFIG_NOP_USB_XCEIV
+ /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
+ usb_nop_xceiv_register();
+#endif
usb_musb_init();
ads7846_dev_init();
}
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index d85296d..739e59e 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -155,20 +155,6 @@
.resource = musb_resources,
};
-#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
- .name = "nop_usb_xceiv",
- .id = -1,
- .dev = {
- .dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = NULL,
- },
-};
-#endif
-
void __init usb_musb_init(void)
{
if (cpu_is_omap243x())
@@ -183,13 +169,6 @@
*/
musb_plat.clock = "ick";
-#ifdef CONFIG_NOP_USB_XCEIV
- if (platform_device_register(&nop_xceiv_device) < 0) {
- printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
- return;
- }
-#endif
-
if (platform_device_register(&musb_device) < 0) {
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;