ARM: DRA7: Provide proper IO map table
DRA7 uses OMAP5 IO table at the moment. This is purely spurious since
the OMAP5 and DRA7 register maps are different in many aspects.
AM57xx/DRA7 TRM Reference: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf
NOTE: Most of the drivers are already doing ioremap, so, there should'nt
be any functional improvement involved here, other than making the
initial iotable more accurate.
Fixes: a3a9384a1157 ("ARM: DRA7: Reuse io tables and add a new .init_early")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 820dde8..c10fb29 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -236,7 +236,7 @@
};
#endif
-#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
+#ifdef CONFIG_SOC_OMAP5
static struct map_desc omap54xx_io_desc[] __initdata = {
{
.virtual = L3_54XX_VIRT,
@@ -265,6 +265,53 @@
};
#endif
+#ifdef CONFIG_SOC_DRA7XX
+static struct map_desc dra7xx_io_desc[] __initdata = {
+ {
+ .virtual = L4_CFG_MPU_DRA7XX_VIRT,
+ .pfn = __phys_to_pfn(L4_CFG_MPU_DRA7XX_PHYS),
+ .length = L4_CFG_MPU_DRA7XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L3_MAIN_SN_DRA7XX_VIRT,
+ .pfn = __phys_to_pfn(L3_MAIN_SN_DRA7XX_PHYS),
+ .length = L3_MAIN_SN_DRA7XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER1_DRA7XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER1_DRA7XX_PHYS),
+ .length = L4_PER1_DRA7XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER2_DRA7XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER2_DRA7XX_PHYS),
+ .length = L4_PER2_DRA7XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER3_DRA7XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER3_DRA7XX_PHYS),
+ .length = L4_PER3_DRA7XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_CFG_DRA7XX_VIRT,
+ .pfn = __phys_to_pfn(L4_CFG_DRA7XX_PHYS),
+ .length = L4_CFG_DRA7XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_WKUP_DRA7XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WKUP_DRA7XX_PHYS),
+ .length = L4_WKUP_DRA7XX_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+#endif
+
#ifdef CONFIG_SOC_OMAP2420
void __init omap242x_map_io(void)
{
@@ -309,12 +356,19 @@
}
#endif
-#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
+#ifdef CONFIG_SOC_OMAP5
void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
}
#endif
+
+#ifdef CONFIG_SOC_DRA7XX
+void __init dra7xx_map_io(void)
+{
+ iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
+}
+#endif
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*