[SCSI] mpt2sas: print level KERN_DEBUG is replaced by KERN_INFO
Converting print level from MPT2SAS_DEBUG_FMT to MPT2SAS_INFO_FMT.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 87c6865..82c2d4c 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -435,7 +435,7 @@
(ioc->bios_pg2.ReqBootDeviceForm &
MPI2_BIOSPAGE2_FORM_MASK),
&ioc->bios_pg2.RequestedBootDevice)) {
- dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
"%s: req_boot_device(0x%016llx)\n",
ioc->name, __func__,
(unsigned long long)sas_address));
@@ -450,7 +450,7 @@
(ioc->bios_pg2.ReqAltBootDeviceForm &
MPI2_BIOSPAGE2_FORM_MASK),
&ioc->bios_pg2.RequestedAltBootDevice)) {
- dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
"%s: req_alt_boot_device(0x%016llx)\n",
ioc->name, __func__,
(unsigned long long)sas_address));
@@ -465,7 +465,7 @@
(ioc->bios_pg2.CurrentBootDeviceForm &
MPI2_BIOSPAGE2_FORM_MASK),
&ioc->bios_pg2.CurrentBootDevice)) {
- dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
"%s: current_boot_device(0x%016llx)\n",
ioc->name, __func__,
(unsigned long long)sas_address));
@@ -566,7 +566,7 @@
{
unsigned long flags;
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle"
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
"(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
sas_device->handle, (unsigned long long)sas_device->sas_address));
@@ -593,7 +593,7 @@
{
unsigned long flags;
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle"
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
"(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
sas_device->handle, (unsigned long long)sas_device->sas_address));
@@ -695,7 +695,7 @@
{
unsigned long flags;
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle"
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
"(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
raid_device->handle, (unsigned long long)raid_device->wwid));
@@ -2002,7 +2002,7 @@
ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
if (ioc_state & MPI2_DOORBELL_USED) {
- dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell "
+ dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
"active!\n", ioc->name));
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
@@ -2806,7 +2806,7 @@
MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
expander_handle) {
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
"setting ignoring flag\n", ioc->name));
fw_event->ignore = 1;
}
@@ -4347,9 +4347,9 @@
status_str = "unknown status";
break;
}
- printk(MPT2SAS_DEBUG_FMT "sas topology change: (%s)\n",
+ printk(MPT2SAS_INFO_FMT "sas topology change: (%s)\n",
ioc->name, status_str);
- printk(KERN_DEBUG "\thandle(0x%04x), enclosure_handle(0x%04x) "
+ printk(KERN_INFO "\thandle(0x%04x), enclosure_handle(0x%04x) "
"start_phy(%02d), count(%d)\n",
le16_to_cpu(event_data->ExpanderDevHandle),
le16_to_cpu(event_data->EnclosureHandle),
@@ -4383,7 +4383,7 @@
}
link_rate = event_data->PHY[i].LinkRate >> 4;
prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
- printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x): %s:"
+ printk(KERN_INFO "\tphy(%02d), attached_handle(0x%04x): %s:"
" link rate: new(0x%02x), old(0x%02x)\n", phy_number,
handle, status_str, link_rate, prev_link_rate);
@@ -4427,7 +4427,7 @@
_scsih_sas_host_refresh(ioc);
if (fw_event->ignore) {
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring expander "
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring expander "
"event\n", ioc->name));
return;
}
@@ -4453,7 +4453,7 @@
/* handle siblings events */
for (i = 0; i < event_data->NumEntries; i++) {
if (fw_event->ignore) {
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring "
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring "
"expander event\n", ioc->name));
return;
}
@@ -4573,12 +4573,12 @@
reason_str = "unknown reason";
break;
}
- printk(MPT2SAS_DEBUG_FMT "device status change: (%s)\n"
+ printk(MPT2SAS_INFO_FMT "device status change: (%s)\n"
"\thandle(0x%04x), sas address(0x%016llx)", ioc->name,
reason_str, le16_to_cpu(event_data->DevHandle),
(unsigned long long)le64_to_cpu(event_data->SASAddress));
if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
- printk(MPT2SAS_DEBUG_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
+ printk(MPT2SAS_INFO_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
event_data->ASC, event_data->ASCQ);
printk(KERN_INFO "\n");
}
@@ -4662,7 +4662,7 @@
break;
}
- printk(MPT2SAS_DEBUG_FMT "enclosure status change: (%s)\n"
+ printk(MPT2SAS_INFO_FMT "enclosure status change: (%s)\n"
"\thandle(0x%04x), enclosure logical id(0x%016llx)"
" number slots(%d)\n", ioc->name, reason_str,
le16_to_cpu(event_data->EnclosureHandle),
@@ -4713,10 +4713,10 @@
Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
#endif
u16 ioc_status;
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: "
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: "
"phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
event_data->PortWidth));
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
termination_count = 0;
@@ -4760,7 +4760,7 @@
}
ioc->broadcast_aen_busy = 0;
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
"%s - exit, query_count = %d termination_count = %d\n",
ioc->name, __func__, query_count, termination_count));
}
@@ -4781,7 +4781,7 @@
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
- printk(MPT2SAS_DEBUG_FMT "discovery event: (%s)", ioc->name,
+ printk(MPT2SAS_INFO_FMT "discovery event: (%s)", ioc->name,
(event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
"start" : "stop");
if (event_data->DiscoveryStatus)
@@ -5075,7 +5075,7 @@
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
- printk(MPT2SAS_DEBUG_FMT "raid config change: (%s), elements(%d)\n",
+ printk(MPT2SAS_INFO_FMT "raid config change: (%s), elements(%d)\n",
ioc->name, (le32_to_cpu(event_data->Flags) &
MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
"foreign" : "native", event_data->NumElements);
@@ -5128,7 +5128,7 @@
element_str = "unknown element";
break;
}
- printk(KERN_DEBUG "\t(%s:%s), vol handle(0x%04x), "
+ printk(KERN_INFO "\t(%s:%s), vol handle(0x%04x), "
"pd handle(0x%04x), pd num(0x%02x)\n", element_str,
reason_str, le16_to_cpu(element->VolDevHandle),
le16_to_cpu(element->PhysDiskDevHandle),
@@ -5218,7 +5218,7 @@
handle = le16_to_cpu(event_data->VolDevHandle);
state = le32_to_cpu(event_data->NewValue);
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), "
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
"old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
le32_to_cpu(event_data->PreviousValue), state));
@@ -5306,7 +5306,7 @@
handle = le16_to_cpu(event_data->PhysDiskDevHandle);
state = le32_to_cpu(event_data->NewValue);
- dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), "
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
"old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
le32_to_cpu(event_data->PreviousValue), state));
@@ -5494,7 +5494,7 @@
}
if (ioc->logging_level & MPT_DEBUG_TASK_SET_FULL)
- starget_printk(KERN_DEBUG, sas_device->starget, "task set "
+ starget_printk(KERN_INFO, sas_device->starget, "task set "
"full: handle(0x%04x), sas_addr(0x%016llx), depth(%d)\n",
handle, (unsigned long long)sas_address, current_depth);
@@ -5885,11 +5885,11 @@
{
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
break;
case MPT2_IOC_AFTER_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
if (ioc->scsih_cmds.status & MPT2_CMD_PENDING) {
ioc->scsih_cmds.status |= MPT2_CMD_RESET;
@@ -5906,7 +5906,7 @@
_scsih_queue_rescan(ioc);
break;
case MPT2_IOC_DONE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
_scsih_sas_host_refresh(ioc);
_scsih_prep_device_scan(ioc);