pata: cable methods
Versus upstream as requested
Last of the trivial switches to cable_detect methods.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 1838176..5a77e4e 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.8"
+#define DRV_VERSION "0.3.8"
/**
* timing_setup - shared timing computation and load
@@ -119,32 +119,25 @@
}
/**
- * amd_probe_init - cable detection
+ * amd_probe_init - perform reset handling
* @ap: ATA port
*
- * Perform cable detection. The BIOS stores this in PCI config
- * space for us.
+ * Reset sequence checking enable bits to see which ports are
+ * active.
*/
static int amd_pre_reset(struct ata_port *ap)
{
- static const u32 bitmask[2] = {0x03, 0x0C};
static const struct pci_bits amd_enable_bits[] = {
{ 0x40, 1, 0x02, 0x02 },
{ 0x40, 1, 0x01, 0x01 }
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 ata66;
if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
return -ENOENT;
- pci_read_config_byte(pdev, 0x42, &ata66);
- if (ata66 & bitmask[ap->port_no])
- ap->cbl = ATA_CBL_PATA80;
- else
- ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -156,28 +149,16 @@
ata_std_postreset);
}
-static int amd_early_pre_reset(struct ata_port *ap)
+static int amd_cable_detect(struct ata_port *ap)
{
+ static const u32 bitmask[2] = {0x03, 0x0C};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- static struct pci_bits amd_enable_bits[] = {
- { 0x40, 1, 0x02, 0x02 },
- { 0x40, 1, 0x01, 0x01 }
- };
+ u8 ata66;
- if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
- return -ENOENT;
-
- /* No host side cable detection */
- ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(ap);
-
-}
-
-static void amd_early_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, amd_early_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
+ pci_read_config_byte(pdev, 0x42, &ata66);
+ if (ata66 & bitmask[ap->port_no])
+ return ATA_CBL_PATA80;
+ return ATA_CBL_PATA40;
}
/**
@@ -247,31 +228,16 @@
*/
static int nv_pre_reset(struct ata_port *ap) {
- static const u8 bitmask[2] = {0x03, 0x0C};
static const struct pci_bits nv_enable_bits[] = {
{ 0x50, 1, 0x02, 0x02 },
{ 0x50, 1, 0x01, 0x01 }
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 ata66;
- u16 udma;
if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
return -ENOENT;
- pci_read_config_byte(pdev, 0x52, &ata66);
- if (ata66 & bitmask[ap->port_no])
- ap->cbl = ATA_CBL_PATA80;
- else
- ap->cbl = ATA_CBL_PATA40;
-
- /* We now have to double check because the Nvidia boxes BIOS
- doesn't always set the cable bits but does set mode bits */
-
- pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
- if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
- ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(ap);
}
@@ -281,6 +247,29 @@
ata_std_softreset, NULL,
ata_std_postreset);
}
+
+static int nv_cable_detect(struct ata_port *ap)
+{
+ static const u8 bitmask[2] = {0x03, 0x0C};
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 ata66;
+ u16 udma;
+ int cbl;
+
+ pci_read_config_byte(pdev, 0x52, &ata66);
+ if (ata66 & bitmask[ap->port_no])
+ cbl = ATA_CBL_PATA80;
+ else
+ cbl = ATA_CBL_PATA40;
+
+ /* We now have to double check because the Nvidia boxes BIOS
+ doesn't always set the cable bits but does set mode bits */
+ pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
+ if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
+ cbl = ATA_CBL_PATA80;
+ return cbl;
+}
+
/**
* nv100_set_piomode - set initial PIO mode data
* @ap: ATA interface
@@ -353,8 +342,9 @@
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = amd_early_error_handler,
+ .error_handler = amd_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -387,8 +377,9 @@
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = amd_early_error_handler,
+ .error_handler = amd_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_unknown,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -423,6 +414,7 @@
.thaw = ata_bmdma_thaw,
.error_handler = amd_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_unknown,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -457,6 +449,7 @@
.thaw = ata_bmdma_thaw,
.error_handler = amd_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = amd_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -491,6 +484,7 @@
.thaw = ata_bmdma_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = nv_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -525,6 +519,7 @@
.thaw = ata_bmdma_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = nv_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -644,6 +639,11 @@
if (type == 1 && rev > 0x7)
type = 2;
+#if defined(CONFIG_ATA_ACPI)
+ /* Prefer the ACPI driver for Nvidia hardware */
+ if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && ata_pata_acpi_present(pdev))
+ return -ENODEV;
+#endif
/* Check for AMD7411 */
if (type == 3)
/* FIFO is broken */