net: bcmgenet: set RBUF_SKIP_FCS based on UniMAC CRC forwarding
When the UniMAC block is configured to forward the CRC as part of the
Ethernet frame (priv->crc_fwd_en, set by default), enabling the hardware
RX checksum block unveiled that the dma_rxchk_bit was never set in the
per-packet status bits (dma_flag in bcmgenet_desc_rx). This would make
the chksum_ok variable to be never set to 1, and the networking stack
would have to compute the packet checksums, which takes a substantial
amount of time.
In order for the RXCHK block to properly compute the packet checksum in
hardware, we also need to set the RBUF_SKIP_FCS bit accordingly.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 8f87fe0..adf8acb 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -416,6 +416,15 @@
else
rbuf_chk_ctrl &= ~RBUF_RXCHK_EN;
priv->desc_rxchk_en = rx_csum_en;
+
+ /* If UniMAC forwards CRC, we need to skip over it to get
+ * a valid CHK bit to be set in the per-packet status word
+ */
+ if (rx_csum_en && priv->crc_fwd_en)
+ rbuf_chk_ctrl |= RBUF_SKIP_FCS;
+ else
+ rbuf_chk_ctrl &= ~RBUF_SKIP_FCS;
+
bcmgenet_rbuf_writel(priv, rbuf_chk_ctrl, RBUF_CHK_CTRL);
return 0;