8250/16?50: Add support for Broadcom TruManage redirected serial port
Add support for the UART device present in Broadcom TruManage capable
NetXtreme chips (ie: 5761m 5762, and 5725).
This implementation has a hidden transmit FIFO, so running in single-byte
interrupt mode results in too many interrupts. The UART_CAP_HFIFO
capability was added to track this. It continues to reload the THR as long
as the THRE and TSRE bits are set in the LSR up to a specified limit (1024
is used here).
Signed-off-by: Stephen Hurd <shurd@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index d085e3a..f932043 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -300,6 +300,12 @@
UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
.flags = UART_CAP_FIFO,
},
+ [PORT_BRCM_TRUMANAGE] = {
+ .name = "TruManage",
+ .fifo_size = 1,
+ .tx_loadsz = 1024,
+ .flags = UART_CAP_HFIFO,
+ },
[PORT_8250_CIR] = {
.name = "CIR port"
}
@@ -1490,6 +1496,11 @@
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
+ if (up->capabilities & UART_CAP_HFIFO) {
+ if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+ BOTH_EMPTY)
+ break;
+ }
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 3b4ea84..12caa12 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -40,6 +40,7 @@
#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 8a2c3d9..a27a98e 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1085,6 +1085,18 @@
return setup_port(priv, port, 2, idx * 8, 0);
}
+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ int ret = pci_default_setup(priv, board, port, idx);
+
+ port->port.type = PORT_BRCM_TRUMANAGE;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ return ret;
+}
+
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
@@ -1304,6 +1316,7 @@
#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020
#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021
#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
+#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
@@ -1954,6 +1967,17 @@
.setup = pci_xr17v35x_setup,
},
/*
+ * Broadcom TruManage (NetXtreme)
+ */
+ {
+ .vendor = PCI_VENDOR_ID_BROADCOM,
+ .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_brcm_trumanage_setup,
+ },
+
+ /*
* Default "match everything" terminator entry
*/
{
@@ -2148,6 +2172,7 @@
pbn_ce4100_1_115200,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
+ pbn_brcm_trumanage,
};
/*
@@ -2892,6 +2917,12 @@
.num_ports = 2,
.base_baud = 115200,
},
+ [pbn_brcm_trumanage] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .reg_shift = 2,
+ .base_baud = 115200,
+ },
};
static const struct pci_device_id blacklist[] = {
@@ -4471,6 +4502,13 @@
pbn_omegapci },
/*
+ * Broadcom TruManage
+ */
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_brcm_trumanage },
+
+ /*
* AgeStar as-prs2-009
*/
{ PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 78f99d9..2c6c85f 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -50,7 +50,8 @@
#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */
-#define PORT_MAX_8250 24 /* max port ID */
+#define PORT_BRCM_TRUMANAGE 24
+#define PORT_MAX_8250 25 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed