arm: at91: dt: at91sam9 add serial pinctrl support
Set the dbgu pinctrl config by default as we have only one possible config
For other uart set the rxd/txd by default.
For at91sam9x5ek create soc based dts as we need to include specific soc dtsi.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
new file mode 100644
index 0000000..cc9730c
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -0,0 +1,59 @@
+/*
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "at91sam9x5cm.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9X5-EK";
+ compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@f801c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ i2c0: i2c@f8010000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f8014000 {
+ status = "okay";
+ };
+
+ i2c2: i2c@f8018000 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00600000 {
+ status = "okay";
+ num-ports = <2>;
+ atmel,vbus-gpio = <&pioD 19 1
+ &pioD 20 1
+ >;
+ };
+
+ usb1: ehci@00700000 {
+ status = "okay";
+ };
+ };
+};