ARM: OMAP2+: raw read and write endian fix
All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.
Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 44bb4d5..751f354 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -151,32 +151,32 @@
u8 omap_ctrl_readb(u16 offset)
{
- return __raw_readb(OMAP_CTRL_REGADDR(offset));
+ return readb_relaxed(OMAP_CTRL_REGADDR(offset));
}
u16 omap_ctrl_readw(u16 offset)
{
- return __raw_readw(OMAP_CTRL_REGADDR(offset));
+ return readw_relaxed(OMAP_CTRL_REGADDR(offset));
}
u32 omap_ctrl_readl(u16 offset)
{
- return __raw_readl(OMAP_CTRL_REGADDR(offset));
+ return readl_relaxed(OMAP_CTRL_REGADDR(offset));
}
void omap_ctrl_writeb(u8 val, u16 offset)
{
- __raw_writeb(val, OMAP_CTRL_REGADDR(offset));
+ writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
}
void omap_ctrl_writew(u16 val, u16 offset)
{
- __raw_writew(val, OMAP_CTRL_REGADDR(offset));
+ writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
}
void omap_ctrl_writel(u32 val, u16 offset)
{
- __raw_writel(val, OMAP_CTRL_REGADDR(offset));
+ writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
}
/*
@@ -188,12 +188,12 @@
u32 omap4_ctrl_pad_readl(u16 offset)
{
- return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
+ return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
}
void omap4_ctrl_pad_writel(u32 val, u16 offset)
{
- __raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
+ writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
}
#ifdef CONFIG_ARCH_OMAP3
@@ -222,7 +222,7 @@
*
* XXX This should use some omap_ctrl_writel()-type function
*/
- __raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
+ writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
}
#endif
@@ -285,7 +285,7 @@
if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
OMAP3430_GLOBAL_COLD_RST_MASK) {
for ( ; offset <= max_offset; offset += 0x4)
- __raw_writel(0x0, (v_addr + offset));
+ writel_relaxed(0x0, (v_addr + offset));
omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
OMAP3430_GR_MOD,
OMAP3_PRM_RSTST_OFFSET);