| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2010 John Crispin <john@phrozen.org> |
| * Based on EP93xx wdt driver |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/of_platform.h> |
| #include <linux/uaccess.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| |
| #include <lantiq_soc.h> |
| |
| /* |
| * Section 3.4 of the datasheet |
| * The password sequence protects the WDT control register from unintended |
| * write actions, which might cause malfunction of the WDT. |
| * |
| * essentially the following two magic passwords need to be written to allow |
| * IO access to the WDT core |
| */ |
| #define LTQ_WDT_PW1 0x00BE0000 |
| #define LTQ_WDT_PW2 0x00DC0000 |
| |
| #define LTQ_WDT_CR 0x0 /* watchdog control register */ |
| #define LTQ_WDT_SR 0x8 /* watchdog status register */ |
| |
| #define LTQ_WDT_SR_EN (0x1 << 31) /* enable bit */ |
| #define LTQ_WDT_SR_PWD (0x3 << 26) /* turn on power */ |
| #define LTQ_WDT_SR_CLKDIV (0x3 << 24) /* turn on clock and set */ |
| /* divider to 0x40000 */ |
| #define LTQ_WDT_DIVIDER 0x40000 |
| #define LTQ_MAX_TIMEOUT ((1 << 16) - 1) /* the reload field is 16 bit */ |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| |
| static void __iomem *ltq_wdt_membase; |
| static unsigned long ltq_io_region_clk_rate; |
| |
| static unsigned long ltq_wdt_bootstatus; |
| static unsigned long ltq_wdt_in_use; |
| static int ltq_wdt_timeout = 30; |
| static int ltq_wdt_ok_to_close; |
| |
| static void |
| ltq_wdt_enable(void) |
| { |
| unsigned long int timeout = ltq_wdt_timeout * |
| (ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000; |
| if (timeout > LTQ_MAX_TIMEOUT) |
| timeout = LTQ_MAX_TIMEOUT; |
| |
| /* write the first password magic */ |
| ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); |
| /* write the second magic plus the configuration and new timeout */ |
| ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV | |
| LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR); |
| } |
| |
| static void |
| ltq_wdt_disable(void) |
| { |
| /* write the first password magic */ |
| ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); |
| /* |
| * write the second password magic with no config |
| * this turns the watchdog off |
| */ |
| ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR); |
| } |
| |
| static ssize_t |
| ltq_wdt_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| ltq_wdt_ok_to_close = 0; |
| for (i = 0; i != len; i++) { |
| char c; |
| |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') |
| ltq_wdt_ok_to_close = 1; |
| else |
| ltq_wdt_ok_to_close = 0; |
| } |
| } |
| ltq_wdt_enable(); |
| } |
| |
| return len; |
| } |
| |
| static struct watchdog_info ident = { |
| .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | |
| WDIOF_CARDRESET, |
| .identity = "ltq_wdt", |
| }; |
| |
| static long |
| ltq_wdt_ioctl(struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int ret = -ENOTTY; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| ret = copy_to_user((struct watchdog_info __user *)arg, &ident, |
| sizeof(ident)) ? -EFAULT : 0; |
| break; |
| |
| case WDIOC_GETBOOTSTATUS: |
| ret = put_user(ltq_wdt_bootstatus, (int __user *)arg); |
| break; |
| |
| case WDIOC_GETSTATUS: |
| ret = put_user(0, (int __user *)arg); |
| break; |
| |
| case WDIOC_SETTIMEOUT: |
| ret = get_user(ltq_wdt_timeout, (int __user *)arg); |
| if (!ret) |
| ltq_wdt_enable(); |
| /* intentional drop through */ |
| case WDIOC_GETTIMEOUT: |
| ret = put_user(ltq_wdt_timeout, (int __user *)arg); |
| break; |
| |
| case WDIOC_KEEPALIVE: |
| ltq_wdt_enable(); |
| ret = 0; |
| break; |
| } |
| return ret; |
| } |
| |
| static int |
| ltq_wdt_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(0, <q_wdt_in_use)) |
| return -EBUSY; |
| ltq_wdt_in_use = 1; |
| ltq_wdt_enable(); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int |
| ltq_wdt_release(struct inode *inode, struct file *file) |
| { |
| if (ltq_wdt_ok_to_close) |
| ltq_wdt_disable(); |
| else |
| pr_err("watchdog closed without warning\n"); |
| ltq_wdt_ok_to_close = 0; |
| clear_bit(0, <q_wdt_in_use); |
| |
| return 0; |
| } |
| |
| static const struct file_operations ltq_wdt_fops = { |
| .owner = THIS_MODULE, |
| .write = ltq_wdt_write, |
| .unlocked_ioctl = ltq_wdt_ioctl, |
| .open = ltq_wdt_open, |
| .release = ltq_wdt_release, |
| .llseek = no_llseek, |
| }; |
| |
| static struct miscdevice ltq_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = <q_wdt_fops, |
| }; |
| |
| static int |
| ltq_wdt_probe(struct platform_device *pdev) |
| { |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| struct clk *clk; |
| |
| ltq_wdt_membase = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(ltq_wdt_membase)) |
| return PTR_ERR(ltq_wdt_membase); |
| |
| /* we do not need to enable the clock as it is always running */ |
| clk = clk_get_io(); |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "Failed to get clock\n"); |
| return -ENOENT; |
| } |
| ltq_io_region_clk_rate = clk_get_rate(clk); |
| clk_put(clk); |
| |
| /* find out if the watchdog caused the last reboot */ |
| if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST) |
| ltq_wdt_bootstatus = WDIOF_CARDRESET; |
| |
| dev_info(&pdev->dev, "Init done\n"); |
| return misc_register(<q_wdt_miscdev); |
| } |
| |
| static int |
| ltq_wdt_remove(struct platform_device *pdev) |
| { |
| misc_deregister(<q_wdt_miscdev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ltq_wdt_match[] = { |
| { .compatible = "lantiq,wdt" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ltq_wdt_match); |
| |
| static struct platform_driver ltq_wdt_driver = { |
| .probe = ltq_wdt_probe, |
| .remove = ltq_wdt_remove, |
| .driver = { |
| .name = "wdt", |
| .of_match_table = ltq_wdt_match, |
| }, |
| }; |
| |
| module_platform_driver(ltq_wdt_driver); |
| |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); |
| MODULE_AUTHOR("John Crispin <john@phrozen.org>"); |
| MODULE_DESCRIPTION("Lantiq SoC Watchdog"); |
| MODULE_LICENSE("GPL"); |