Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (39 commits)
Revert "p54: Use SKB list handling helpers instead of by-hand code."
sctp: fix warning at inet_sock_destruct() while release sctp socket
tun/tap: Fix crashes if open() /dev/net/tun and then poll() it.
dsa: fix 88e6xxx statistics counter snapshotting
forcedeth: Fix NAPI race.
drivers/net/smsc911x.c: Fix resource size off by 1 error
pcnet_cs: add new id
bnx2x: Fix the maximal values of coalescing timeouts.
bnx2x: Disable HC coalescing when setting timeout to zero.
tun: Fix device unregister race
be2net: fix spurious interrupt handling in intx mode
e1000e: disable K1 at 1000Mbps for 82577/82578
e1000e: delay second read of PHY_STATUS register on failure of first read
e1000e: prevent NVM corruption on sectors larger than 4K
e1000e: do not write SmartSpeed register bits on parts without support
e1000e: delay after LCD reset and proper checks for PHY configuration done
e1000e: PHY loopback broken on 82578
ixgbe: Not allow 8259x unsupported wol options change from ethtool
ixgbe: fix inconsistent SFP/SFP+ failure results.
ixgbe: fix regression on some 82598 adapters
...
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index ec51696..2d91049 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -294,32 +294,33 @@
{RSP_OK, 604,604, -1, 605, 5, {ACT_CMD+AT_MSN}},
{RSP_OK, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}},
{RSP_NULL, 605,605, -1, 606, 5, {ACT_CMD+AT_ISO}},
- {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"}, /* set "Endgeraetemodus" */
+ {RSP_OK, 606,606, -1, 607, 5, {0}, "+VLS=17\r"},
{RSP_OK, 607,607, -1, 608,-1},
- //{RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 608, 0, {ACT_ERROR}},//DELETE
{RSP_ZSAU, 608,608,ZSAU_PROCEEDING, 609, 5, {ACT_CMD+AT_DIAL}},
{RSP_OK, 609,609, -1, 650, 0, {ACT_DIALING}},
- {RSP_ZVLS, 608,608, 17, -1,-1, {ACT_DEBUG}},
- {RSP_ZCTP, 609,609, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZCPN, 609,609, -1, -1,-1, {ACT_DEBUG}},
{RSP_ERROR, 601,609, -1, 0, 0, {ACT_ABORTDIAL}},
{EV_TIMEOUT, 601,609, -1, 0, 0, {ACT_ABORTDIAL}},
- /* dialing */
- {RSP_ZCTP, 650,650, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZCPN, 650,650, -1, -1,-1, {ACT_DEBUG}},
- {RSP_ZSAU, 650,650,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}}, /* some devices don't send this */
+ /* optional dialing responses */
+ {EV_BC_OPEN, 650,650, -1, 651,-1},
+ {RSP_ZVLS, 608,651, 17, -1,-1, {ACT_DEBUG}},
+ {RSP_ZCTP, 609,651, -1, -1,-1, {ACT_DEBUG}},
+ {RSP_ZCPN, 609,651, -1, -1,-1, {ACT_DEBUG}},
+ {RSP_ZSAU, 650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}},
- /* connection established */
- {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
- {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}}, //FIXME -> DLE1
-
- {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}}, //FIXME new constate + timeout
+ /* connect */
+ {RSP_ZSAU, 650,650,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}},
+ {RSP_ZSAU, 651,651,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT,
+ ACT_NOTIFY_BC_UP}},
+ {RSP_ZSAU, 750,750,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT}},
+ {RSP_ZSAU, 751,751,ZSAU_ACTIVE, 800,-1, {ACT_CONNECT,
+ ACT_NOTIFY_BC_UP}},
+ {EV_BC_OPEN, 800,800, -1, 800,-1, {ACT_NOTIFY_BC_UP}},
/* remote hangup */
- {RSP_ZSAU, 650,650,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}},
- {RSP_ZSAU, 750,750,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
+ {RSP_ZSAU, 650,651,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT}},
+ {RSP_ZSAU, 750,751,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
{RSP_ZSAU, 800,800,ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP}},
/* hangup */
@@ -358,7 +359,8 @@
{RSP_ZSAU, 700,729,ZSAU_ACTIVE, 0, 0, {ACT_ABORTACCEPT}},
{RSP_ZSAU, 700,729,ZSAU_DISCONNECT_IND, 0, 0, {ACT_ABORTACCEPT}},
- {EV_TIMEOUT, 750,750, -1, 0, 0, {ACT_CONNTIMEOUT}},
+ {EV_BC_OPEN, 750,750, -1, 751,-1},
+ {EV_TIMEOUT, 750,751, -1, 0, 0, {ACT_CONNTIMEOUT}},
/* B channel closed (general case) */
{EV_BC_CLOSED, -1, -1, -1, -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
@@ -876,12 +878,6 @@
static void bchannel_up(struct bc_state *bcs)
{
- if (!(bcs->chstate & CHS_D_UP)) {
- dev_notice(bcs->cs->dev, "%s: D channel not up\n", __func__);
- bcs->chstate |= CHS_D_UP;
- gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
- }
-
if (bcs->chstate & CHS_B_UP) {
dev_notice(bcs->cs->dev, "%s: B channel already up\n",
__func__);
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index db3a1e4..bed38fc 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -174,12 +174,6 @@
pr_err("invalid size %d\n", size);
return -EINVAL;
}
- src = iwb->read;
- if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
- (read < src && limit >= src))) {
- pr_err("isoc write buffer frame reservation violated\n");
- return -EFAULT;
- }
#endif
if (read < write) {
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index b02e805..29c33c7 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -55,6 +55,10 @@
#define MEMBAR_CTRL_INT_CTRL_PFUNC_MASK 0x7 /* bits 26 - 28 */
#define MEMBAR_CTRL_INT_CTRL_PFUNC_SHIFT 26
+/********* ISR0 Register offset **********/
+#define CEV_ISR0_OFFSET 0xC18
+#define CEV_ISR_SIZE 4
+
/********* Event Q door bell *************/
#define DB_EQ_OFFSET DB_CQ_OFFSET
#define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 308eb09..c43f6a1 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1274,15 +1274,17 @@
{
struct be_adapter *adapter = dev;
struct be_ctrl_info *ctrl = &adapter->ctrl;
- int rx, tx;
+ int isr;
- tx = event_handle(ctrl, &adapter->tx_eq);
- rx = event_handle(ctrl, &adapter->rx_eq);
+ isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+ ctrl->pci_func * CEV_ISR_SIZE);
+ if (!isr)
+ return IRQ_NONE;
- if (rx || tx)
- return IRQ_HANDLED;
- else
- return IRQ_NONE;
+ event_handle(ctrl, &adapter->tx_eq);
+ event_handle(ctrl, &adapter->rx_eq);
+
+ return IRQ_HANDLED;
}
static irqreturn_t be_msix_rx(int irq, void *dev)
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 8678457..85a737c 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -902,6 +902,8 @@
u16 rx_quick_cons_trip;
u16 rx_ticks_int;
u16 rx_ticks;
+/* Maximal coalescing timeout in us */
+#define BNX2X_MAX_COALESCE_TOUT (0xf0*12)
u32 lin_cnt;
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 951714a..6c67be6 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -4434,7 +4434,7 @@
REG_WR16(bp, BAR_USTRORM_INTMEM +
USTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
U_SB_ETH_RX_CQ_INDEX),
- bp->rx_ticks ? 0 : 1);
+ (bp->rx_ticks/12) ? 0 : 1);
/* HC_INDEX_C_ETH_TX_CQ_CONS */
REG_WR8(bp, BAR_CSTRORM_INTMEM +
@@ -4444,7 +4444,7 @@
REG_WR16(bp, BAR_CSTRORM_INTMEM +
CSTORM_SB_HC_DISABLE_OFFSET(port, sb_id,
C_SB_ETH_TX_CQ_INDEX),
- bp->tx_ticks ? 0 : 1);
+ (bp->tx_ticks/12) ? 0 : 1);
}
}
@@ -9069,12 +9069,12 @@
struct bnx2x *bp = netdev_priv(dev);
bp->rx_ticks = (u16) coal->rx_coalesce_usecs;
- if (bp->rx_ticks > 3000)
- bp->rx_ticks = 3000;
+ if (bp->rx_ticks > BNX2X_MAX_COALESCE_TOUT)
+ bp->rx_ticks = BNX2X_MAX_COALESCE_TOUT;
bp->tx_ticks = (u16) coal->tx_coalesce_usecs;
- if (bp->tx_ticks > 0x3000)
- bp->tx_ticks = 0x3000;
+ if (bp->tx_ticks > BNX2X_MAX_COALESCE_TOUT)
+ bp->tx_ticks = BNX2X_MAX_COALESCE_TOUT;
if (netif_running(dev))
bnx2x_update_coalesce(bp);
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 8890c97..c0f185b 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -238,6 +238,7 @@
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
+#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
/* Constants used to interpret the masked PCI-X bus speed. */
@@ -575,6 +576,8 @@
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
+
/* NVM Control */
#define E1000_EECD_SK 0x00000001 /* NVM Clock */
#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 163c1c0..fd44d9f 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -215,6 +215,7 @@
E1000_SWSM = 0x05B50, /* SW Semaphore */
E1000_FWSM = 0x05B54, /* FW Semaphore */
E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */
+ E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
E1000_HICR = 0x08F00, /* Host Interface Control */
};
@@ -302,6 +303,9 @@
#define E1000_KMRNCTRLSTA_REN 0x00200000
#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE 0x140E
+#define E1000_KMRNCTRLSTA_K1_DISABLE 0x1400
#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 9e23f50f..d56c747 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,6 +338,7 @@
{
struct e1000_nvm_info *nvm = &hw->nvm;
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ union ich8_hws_flash_status hsfsts;
u32 gfpreg;
u32 sector_base_addr;
u32 sector_end_addr;
@@ -374,6 +375,20 @@
/* Adjust to word count */
nvm->flash_bank_size /= sizeof(u16);
+ /*
+ * Make sure the flash bank size does not overwrite the 4k
+ * sector ranges. We may have 64k allotted to us but we only care
+ * about the first 2 4k sectors. Therefore, if we have anything less
+ * than 64k set in the HSFSTS register, we will reduce the bank size
+ * down to 4k and let the rest remain unused. If berasesz == 3, then
+ * we are working in 64k mode. Otherwise we are not.
+ */
+ if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) {
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.berasesz != 3)
+ nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS;
+ }
+
nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
/* Clear shadow ram */
@@ -446,6 +461,95 @@
return 0;
}
+/**
+ * e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status) {
+ ret_val = 0;
+ goto out;
+ }
+
+ if (hw->mac.type == e1000_pchlan) {
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ E1000_KMRNCTRLSTA_K1_ENABLE);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ goto out; /* No link detected */
+
+ mac->get_link_status = false;
+
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = e1000_link_stall_workaround_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ e1000e_check_downshift(hw);
+
+ /*
+ * If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ /*
+ * Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ e1000e_config_collision_dist(hw);
+
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg(hw, "Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@@ -694,6 +798,38 @@
}
/**
+ * e1000_lan_init_done_ich8lan - Check for PHY config completion
+ * @hw: pointer to the HW structure
+ *
+ * Check the appropriate indication the MAC has finished configuring the
+ * PHY after a software reset.
+ **/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+ u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
+ /* Wait for basic configuration completes before proceeding */
+ do {
+ data = er32(STATUS);
+ data &= E1000_STATUS_LAN_INIT_DONE;
+ udelay(100);
+ } while ((!data) && --loop);
+
+ /*
+ * If basic configuration is incomplete before the above loop
+ * count reaches 0, loading the configuration from NVM will
+ * leave the PHY in a bad state possibly resulting in no link.
+ */
+ if (loop == 0)
+ hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+
+ /* Clear the Init Done bit for the next init event */
+ data = er32(STATUS);
+ data &= ~E1000_STATUS_LAN_INIT_DONE;
+ ew32(STATUS, data);
+}
+
+/**
* e1000_phy_hw_reset_ich8lan - Performs a PHY reset
* @hw: pointer to the HW structure
*
@@ -707,13 +843,15 @@
u32 i;
u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
s32 ret_val;
- u16 loop = E1000_ICH8_LAN_INIT_TIMEOUT;
u16 word_addr, reg_data, reg_addr, phy_page = 0;
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
return ret_val;
+ /* Allow time for h/w to get to a quiescent state after reset */
+ mdelay(10);
+
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
if (ret_val)
@@ -741,26 +879,8 @@
if (!(data & sw_cfg_mask))
return 0;
- /* Wait for basic configuration completes before proceeding*/
- do {
- data = er32(STATUS);
- data &= E1000_STATUS_LAN_INIT_DONE;
- udelay(100);
- } while ((!data) && --loop);
-
- /*
- * If basic configuration is incomplete before the above loop
- * count reaches 0, loading the configuration from NVM will
- * leave the PHY in a bad state possibly resulting in no link.
- */
- if (loop == 0) {
- hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
- }
-
- /* Clear the Init Done bit for the next init event */
- data = er32(STATUS);
- data &= ~E1000_STATUS_LAN_INIT_DONE;
- ew32(STATUS, data);
+ /* Wait for basic configuration completes before proceeding */
+ e1000_lan_init_done_ich8lan(hw);
/*
* Make sure HW does not configure LCD from PHY
@@ -961,12 +1081,14 @@
phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* Call gig speed drop workaround on LPLU before accessing
* any PHY registers
*/
- if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3))
+ if (hw->mac.type == e1000_ich8lan)
e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
@@ -979,6 +1101,9 @@
phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
@@ -1038,6 +1163,10 @@
if (!active) {
phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* LPLU and SmartSpeed are mutually exclusive. LPLU is used
* during Dx states where the power conservation is most
@@ -1073,12 +1202,14 @@
phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
ew32(PHY_CTRL, phy_ctrl);
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
/*
* Call gig speed drop workaround on LPLU before accessing
* any PHY registers
*/
- if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3))
+ if (hw->mac.type == e1000_ich8lan)
e1000e_gig_downshift_workaround_ich8lan(hw);
/* When LPLU is enabled, we should disable SmartSpeed */
@@ -1905,7 +2036,7 @@
break;
case 1:
sector_size = ICH_FLASH_SEG_SIZE_4K;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_4K;
+ iteration = 1;
break;
case 2:
if (hw->mac.type == e1000_ich9lan) {
@@ -1917,7 +2048,7 @@
break;
case 3:
sector_size = ICH_FLASH_SEG_SIZE_64K;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_64K;
+ iteration = 1;
break;
default:
return -E1000_ERR_NVM;
@@ -2143,6 +2274,12 @@
ctrl = er32(CTRL);
if (!e1000_check_reset_block(hw)) {
+ /* Clear PHY Reset Asserted bit */
+ if (hw->mac.type >= e1000_pchlan) {
+ u32 status = er32(STATUS);
+ ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+ }
+
/*
* PHY HW reset requires MAC CORE reset at the same
* time to make sure the interface between MAC and the
@@ -2156,22 +2293,33 @@
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
- if (!ret_val) {
- /* release the swflag because it is not reset by
- * hardware reset
- */
+ if (!ret_val)
e1000_release_swflag_ich8lan(hw);
+
+ if (ctrl & E1000_CTRL_PHY_RST)
+ ret_val = hw->phy.ops.get_cfg_done(hw);
+
+ if (hw->mac.type >= e1000_ich10lan) {
+ e1000_lan_init_done_ich8lan(hw);
+ } else {
+ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val) {
+ /*
+ * When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg(hw, "Auto Read Done did not complete\n");
+ }
}
- ret_val = e1000e_get_auto_rd_done(hw);
- if (ret_val) {
- /*
- * When auto config read does not complete, do not
- * return with an error. This can happen in situations
- * where there is no eeprom and prevents getting link.
- */
- hw_dbg(hw, "Auto Read Done did not complete\n");
- }
+ /*
+ * For PCH, this write will make sure that any noise
+ * will be detected as a CRC error and be dropped rather than show up
+ * as a bad packet to the DMA engine.
+ */
+ if (hw->mac.type == e1000_pchlan)
+ ew32(CRC_OFFSET, 0x65656565);
ew32(IMC, 0xffffffff);
icr = er32(ICR);
@@ -2222,6 +2370,18 @@
for (i = 0; i < mac->mta_reg_count; i++)
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+ /*
+ * The 82578 Rx buffer will stall if wakeup is enabled in host and
+ * the ME. Reading the BM_WUC register will clear the host wakeup bit.
+ * Reset the phy after disabling host wakeup to reset the Rx buffer.
+ */
+ if (hw->phy.type == e1000_phy_82578) {
+ hw->phy.ops.read_phy_reg(hw, BM_WUC, &i);
+ ret_val = e1000_phy_hw_reset_ich8lan(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Setup link and flow control */
ret_val = e1000_setup_link_ich8lan(hw);
@@ -2254,16 +2414,6 @@
ew32(CTRL_EXT, ctrl_ext);
/*
- * The 82578 Rx buffer will stall if wakeup is enabled in host and
- * the ME. Reading the BM_WUC register will clear the host wakeup bit.
- * Reset the phy after disabling host wakeup to reset the Rx buffer.
- */
- if (hw->phy.type == e1000_phy_82578) {
- e1e_rphy(hw, BM_WUC, &i);
- e1000e_phy_hw_reset_generic(hw);
- }
-
- /*
* Clear all of the statistics registers (clear on read). It is
* important that we do this after we have tried to establish link
* because the symbol error count will increment wildly if there
@@ -2485,6 +2635,14 @@
if (ret_val)
return ret_val;
+ if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ E1000_KMRNCTRLSTA_K1_DISABLE);
+ if (ret_val)
+ return ret_val;
+ }
+
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3) &&
(*speed == SPEED_1000)) {
@@ -2850,6 +3008,16 @@
{
u32 bank = 0;
+ if (hw->mac.type >= e1000_pchlan) {
+ u32 status = er32(STATUS);
+
+ if (status & E1000_STATUS_PHYRA)
+ ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+ else
+ hw_dbg(hw,
+ "PHY Reset Asserted not set - needs delay\n");
+ }
+
e1000e_get_cfg_done(hw);
/* If EEPROM is not marked present, init the IGP 3 PHY manually */
@@ -2921,7 +3089,7 @@
static struct e1000_mac_operations ich8_mac_ops = {
.id_led_init = e1000e_id_led_init,
.check_mng_mode = e1000_check_mng_mode_ich8lan,
- .check_for_link = e1000e_check_for_copper_link,
+ .check_for_link = e1000_check_for_copper_link_ich8lan,
/* cleanup_led dependent on mac type */
.clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
.get_bus_info = e1000_get_bus_info_ich8lan,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index be6d9e9..99ba2b8 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -378,12 +378,6 @@
mac->get_link_status = 0;
- if (hw->phy.type == e1000_phy_82578) {
- ret_val = e1000_link_stall_workaround_hv(hw);
- if (ret_val)
- return ret_val;
- }
-
/*
* Check if there was DownShift, must be checked
* immediately after link-up
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index e23459c..994401fd 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1531,7 +1531,12 @@
*/
ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
if (ret_val)
- break;
+ /*
+ * If the first read fails, another entity may have
+ * ownership of the resources, wait and try again to
+ * see if they have relinquished the resources yet.
+ */
+ udelay(usec_interval);
ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
if (ret_val)
break;
@@ -2737,6 +2742,11 @@
if (hw->phy.type != e1000_phy_82578)
goto out;
+ /* Do not apply workaround if in PHY loopback bit 14 set */
+ hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+ if (data & PHY_CONTROL_LB)
+ goto out;
+
/* check if link is up and at 1Gbps */
ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
if (ret_val)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 1094d29..3b4e076 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3514,11 +3514,13 @@
nv_msi_workaround(np);
#ifdef CONFIG_FORCEDETH_NAPI
- napi_schedule(&np->napi);
-
- /* Disable furthur irq's
- (msix not enabled with napi) */
- writel(0, base + NvRegIrqMask);
+ if (napi_schedule_prep(&np->napi)) {
+ /*
+ * Disable further irq's (msix not enabled with napi)
+ */
+ writel(0, base + NvRegIrqMask);
+ __napi_schedule(&np->napi);
+ }
#else
do
@@ -3615,12 +3617,13 @@
nv_msi_workaround(np);
#ifdef CONFIG_FORCEDETH_NAPI
- napi_schedule(&np->napi);
-
- /* Disable furthur irq's
- (msix not enabled with napi) */
- writel(0, base + NvRegIrqMask);
-
+ if (napi_schedule_prep(&np->napi)) {
+ /*
+ * Disable further irq's (msix not enabled with napi)
+ */
+ writel(0, base + NvRegIrqMask);
+ __napi_schedule(&np->napi);
+ }
#else
do
{
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 0f7b6a3..2a97800 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1830,7 +1830,6 @@
break;
default:
wol->supported = 0;
- retval = 0;
}
return retval;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 5588ef4..a3061aa 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2697,19 +2697,23 @@
/*
* For hot-pluggable SFP+ devices, a new SFP+ module may have
- * arrived before interrupts were enabled. We need to kick off
- * the SFP+ module setup first, then try to bring up link.
+ * arrived before interrupts were enabled but after probe. Such
+ * devices wouldn't have their type identified yet. We need to
+ * kick off the SFP+ module setup first, then try to bring up link.
* If we're not hot-pluggable SFP+, we just need to configure link
* and bring it up.
*/
- err = hw->phy.ops.identify(hw);
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- dev_err(&adapter->pdev->dev, "failed to initialize because "
- "an unsupported SFP+ module type was detected.\n"
- "Reload the driver after installing a supported "
- "module.\n");
- ixgbe_down(adapter);
- return err;
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ err = hw->phy.ops.identify(hw);
+ if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ /*
+ * Take the device down and schedule the sfp tasklet
+ * which will unregister_netdev and log it.
+ */
+ ixgbe_down(adapter);
+ schedule_work(&adapter->sfp_config_module_task);
+ return err;
+ }
}
if (ixgbe_is_sfp(hw)) {
@@ -3724,7 +3728,7 @@
if ((hw->phy.type == ixgbe_phy_nl) &&
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
s32 ret = hw->phy.ops.identify_sfp(hw);
- if (ret)
+ if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
goto reschedule;
ret = hw->phy.ops.reset(hw);
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
@@ -4534,13 +4538,17 @@
u32 err;
adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+ /* Time for electrical oscillations to settle down */
+ msleep(100);
err = hw->phy.ops.identify_sfp(hw);
+
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
dev_err(&adapter->pdev->dev, "failed to initialize because "
"an unsupported SFP+ module type was detected.\n"
"Reload the driver after installing a supported "
"module.\n");
- ixgbe_down(adapter);
+ unregister_netdev(adapter->netdev);
return;
}
hw->mac.ops.setup_sfp(hw);
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 453e966..9ecad17 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -60,6 +60,7 @@
if (hw->phy.type == ixgbe_phy_unknown) {
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ hw->phy.mdio.prtad = phy_addr;
if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
ixgbe_get_phy_id(hw);
hw->phy.type =
@@ -68,6 +69,8 @@
break;
}
}
+ /* clear value if nothing found */
+ hw->phy.mdio.prtad = 0;
} else {
status = 0;
}
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 970cede..e1cdba7 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -60,7 +60,18 @@
#define _NETXEN_NIC_LINUX_SUBVERSION 30
#define NETXEN_NIC_LINUX_VERSIONID "4.0.30"
-#define NETXEN_VERSION_CODE(a, b, c) (((a) << 16) + ((b) << 8) + (c))
+#define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
+#define _major(v) (((v) >> 24) & 0xff)
+#define _minor(v) (((v) >> 16) & 0xff)
+#define _build(v) ((v) & 0xffff)
+
+/* version in image has weird encoding:
+ * 7:0 - major
+ * 15:8 - minor
+ * 31:16 - build (little endian)
+ */
+#define NETXEN_DECODE_VERSION(v) \
+ NETXEN_VERSION_CODE(((v) & 0xff), (((v) >> 8) & 0xff), ((v) >> 16))
#define NETXEN_NUM_FLASH_SECTORS (64)
#define NETXEN_FLASH_SECTOR_SIZE (64 * 1024)
@@ -614,6 +625,7 @@
#define NX_P2_MN_ROMIMAGE 0
#define NX_P3_CT_ROMIMAGE 1
#define NX_P3_MN_ROMIMAGE 2
+#define NX_FLASH_ROMIMAGE 3
#define NETXEN_USER_START_OLD NETXEN_PXE_START /* for backward compatibility */
@@ -1243,7 +1255,7 @@
u32 resv3;
u8 has_link_events;
- u8 resv1;
+ u8 fw_type;
u16 tx_context_id;
u16 mtu;
u16 is_up;
@@ -1387,6 +1399,7 @@
int netxen_initialize_adapter_offload(struct netxen_adapter *adapter);
int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val);
int netxen_load_firmware(struct netxen_adapter *adapter);
+int netxen_need_fw_reset(struct netxen_adapter *adapter);
void netxen_request_firmware(struct netxen_adapter *adapter);
void netxen_release_firmware(struct netxen_adapter *adapter);
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 3cc0478..8241036 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -853,6 +853,7 @@
#define NX_PEG_TUNE_CAPABILITY (NETXEN_CAM_RAM(0x02c))
#define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14)
+#define NETXEN_PEG_ALIVE_COUNTER (NETXEN_CAM_RAM(0xb0))
#define ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC)))
#define ISR_LEGACY_INT_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200)
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 055bb61..b899bd5 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -684,11 +684,84 @@
}
int
+netxen_need_fw_reset(struct netxen_adapter *adapter)
+{
+ u32 count, old_count;
+ u32 val, version, major, minor, build;
+ int i, timeout;
+ u8 fw_type;
+
+ /* NX2031 firmware doesn't support heartbit */
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+ return 1;
+
+ /* last attempt had failed */
+ if (NXRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
+ return 1;
+
+ old_count = count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+
+ for (i = 0; i < 10; i++) {
+
+ timeout = msleep_interruptible(200);
+ if (timeout) {
+ NXWR32(adapter, CRB_CMDPEG_STATE,
+ PHAN_INITIALIZE_FAILED);
+ return -EINTR;
+ }
+
+ count = NXRD32(adapter, NETXEN_PEG_ALIVE_COUNTER);
+ if (count != old_count)
+ break;
+ }
+
+ /* firmware is dead */
+ if (count == old_count)
+ return 1;
+
+ /* check if we have got newer or different file firmware */
+ if (adapter->fw) {
+
+ const struct firmware *fw = adapter->fw;
+
+ val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+ version = NETXEN_DECODE_VERSION(val);
+
+ major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
+ minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
+ build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
+
+ if (version > NETXEN_VERSION_CODE(major, minor, build))
+ return 1;
+
+ if (version == NETXEN_VERSION_CODE(major, minor, build)) {
+
+ val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
+ fw_type = (val & 0x4) ?
+ NX_P3_CT_ROMIMAGE : NX_P3_MN_ROMIMAGE;
+
+ if (adapter->fw_type != fw_type)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static char *fw_name[] = {
+ "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+};
+
+int
netxen_load_firmware(struct netxen_adapter *adapter)
{
u64 *ptr64;
u32 i, flashaddr, size;
const struct firmware *fw = adapter->fw;
+ struct pci_dev *pdev = adapter->pdev;
+
+ dev_info(&pdev->dev, "loading firmware from %s\n",
+ fw_name[adapter->fw_type]);
if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
NXWR32(adapter, NETXEN_ROMUSB_GLB_CAS_RST, 1);
@@ -756,7 +829,7 @@
netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
{
__le32 val;
- u32 major, minor, build, ver, min_ver, bios;
+ u32 ver, min_ver, bios;
struct pci_dev *pdev = adapter->pdev;
const struct firmware *fw = adapter->fw;
@@ -768,21 +841,18 @@
return -EINVAL;
val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
- major = (__force u32)val & 0xff;
- minor = ((__force u32)val >> 8) & 0xff;
- build = (__force u32)val >> 16;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
min_ver = NETXEN_VERSION_CODE(4, 0, 216);
else
min_ver = NETXEN_VERSION_CODE(3, 4, 216);
- ver = NETXEN_VERSION_CODE(major, minor, build);
+ ver = NETXEN_DECODE_VERSION(val);
- if ((major > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
+ if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
dev_err(&pdev->dev,
"%s: firmware version %d.%d.%d unsupported\n",
- fwname, major, minor, build);
+ fwname, _major(ver), _minor(ver), _build(ver));
return -EINVAL;
}
@@ -798,22 +868,21 @@
if (netxen_rom_fast_read(adapter,
NX_FW_VERSION_OFFSET, (int *)&val))
return -EIO;
- major = (__force u32)val & 0xff;
- minor = ((__force u32)val >> 8) & 0xff;
- build = (__force u32)val >> 16;
- if (NETXEN_VERSION_CODE(major, minor, build) > ver)
+ val = NETXEN_DECODE_VERSION(val);
+ if (val > ver) {
+ dev_info(&pdev->dev, "%s: firmware is older than flash\n",
+ fwname);
return -EINVAL;
+ }
NXWR32(adapter, NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
return 0;
}
-static char *fw_name[] = { "nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin" };
-
void netxen_request_firmware(struct netxen_adapter *adapter)
{
u32 capability, flashed_ver;
- int fw_type;
+ u8 fw_type;
struct pci_dev *pdev = adapter->pdev;
int rc = 0;
@@ -830,6 +899,8 @@
netxen_rom_fast_read(adapter,
NX_FW_VERSION_OFFSET, (int *)&flashed_ver);
+ flashed_ver = NETXEN_DECODE_VERSION(flashed_ver);
+
if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
if (capability & NX_PEG_TUNE_MN_PRESENT) {
@@ -838,6 +909,10 @@
}
}
+ fw_type = NX_FLASH_ROMIMAGE;
+ adapter->fw = NULL;
+ goto done;
+
request_fw:
rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
if (rc != 0) {
@@ -846,6 +921,7 @@
goto request_mn;
}
+ fw_type = NX_FLASH_ROMIMAGE;
adapter->fw = NULL;
goto done;
}
@@ -859,16 +935,13 @@
goto request_mn;
}
+ fw_type = NX_FLASH_ROMIMAGE;
adapter->fw = NULL;
goto done;
}
done:
- if (adapter->fw)
- dev_info(&pdev->dev, "loading firmware from file %s\n",
- fw_name[fw_type]);
- else
- dev_info(&pdev->dev, "loading firmware from flash\n");
+ adapter->fw_type = fw_type;
}
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 2919a2d..27539dd 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -718,6 +718,10 @@
if (request_fw)
netxen_request_firmware(adapter);
+ err = netxen_need_fw_reset(adapter);
+ if (err <= 0)
+ return err;
+
if (first_boot != 0x55555555) {
NXWR32(adapter, CRB_CMDPEG_STATE, 0);
netxen_pinit_from_rom(adapter, 0);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 652a368..9ef1c1b 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1727,6 +1727,7 @@
PCMCIA_DEVICE_PROD_ID12("PRETEC", "Ethernet CompactLAN 10BaseT 3.3V", 0xebf91155, 0x7f5a4f50),
PCMCIA_DEVICE_PROD_ID12("Psion Dacom", "Gold Card Ethernet", 0xf5f025c2, 0x3a30e110),
PCMCIA_DEVICE_PROD_ID12("=RELIA==", "Ethernet", 0xcdd0644a, 0x00b2e941),
+ PCMCIA_DEVICE_PROD_ID12("RIOS Systems Co.", "PC CARD3 ETHERNET", 0x7dd33481, 0x10b41826),
PCMCIA_DEVICE_PROD_ID12("RP", "1625B Ethernet NE2000 Compatible", 0xe3e66e22, 0xb96150df),
PCMCIA_DEVICE_PROD_ID12("RPTI", "EP400 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4a7e2ae0),
PCMCIA_DEVICE_PROD_ID12("RPTI", "EP401 Ethernet NE2000 Compatible", 0xdc6f88fd, 0x4bcbd7fd),
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 61755cb..eda94fc 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -928,13 +928,32 @@
* Otherwise, it's 0, and we're
* still waiting for AN */
if (err > 0) {
- phydev->state = PHY_RUNNING;
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else
+ phydev->state = PHY_NOLINK;
+ phydev->adjust_link(phydev->attached_dev);
} else {
phydev->state = PHY_AN;
phydev->link_timeout = PHY_AN_TIMEOUT;
}
- } else
- phydev->state = PHY_RUNNING;
+ } else {
+ err = phy_read_status(phydev);
+ if (err)
+ break;
+
+ if (phydev->link) {
+ phydev->state = PHY_RUNNING;
+ netif_carrier_on(phydev->attached_dev);
+ } else
+ phydev->state = PHY_NOLINK;
+ phydev->adjust_link(phydev->attached_dev);
+ }
break;
}
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 156e02e..6ed5317 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1607,6 +1607,8 @@
int ql_cam_route_initialize(struct ql_adapter *qdev);
int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
int ql_mb_about_fw(struct ql_adapter *qdev);
+void ql_link_on(struct ql_adapter *qdev);
+void ql_link_off(struct ql_adapter *qdev);
#if 1
#define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 37c99fe..eb6a9ee 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -59,7 +59,7 @@
cqicb->pkt_delay =
cpu_to_le16(qdev->tx_max_coalesced_frames);
cqicb->flags = FLAGS_LI;
- status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+ status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
CFG_LCQ, rx_ring->cq_id);
if (status) {
QPRINTK(qdev, IFUP, ERR,
@@ -82,7 +82,7 @@
cqicb->pkt_delay =
cpu_to_le16(qdev->rx_max_coalesced_frames);
cqicb->flags = FLAGS_LI;
- status = ql_write_cfg(qdev, cqicb, sizeof(cqicb),
+ status = ql_write_cfg(qdev, cqicb, sizeof(*cqicb),
CFG_LCQ, rx_ring->cq_id);
if (status) {
QPRINTK(qdev, IFUP, ERR,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 90d1f76..5768af1 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -214,6 +214,10 @@
return -ENOMEM;
}
+ status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
+ if (status)
+ return status;
+
status = ql_wait_cfg(qdev, bit);
if (status) {
QPRINTK(qdev, IFUP, ERR,
@@ -221,12 +225,8 @@
goto exit;
}
- status = ql_sem_spinlock(qdev, SEM_ICB_MASK);
- if (status)
- goto exit;
ql_write32(qdev, ICB_L, (u32) map);
ql_write32(qdev, ICB_H, (u32) (map >> 32));
- ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */
mask = CFG_Q_MASK | (bit << 16);
value = bit | (q_id << CFG_Q_SHIFT);
@@ -237,6 +237,7 @@
*/
status = ql_wait_cfg(qdev, bit);
exit:
+ ql_sem_unlock(qdev, SEM_ICB_MASK); /* does flush too */
pci_unmap_single(qdev->pdev, map, size, direction);
return status;
}
@@ -412,6 +413,57 @@
return status;
}
+/* Set or clear MAC address in hardware. We sometimes
+ * have to clear it to prevent wrong frame routing
+ * especially in a bonding environment.
+ */
+static int ql_set_mac_addr(struct ql_adapter *qdev, int set)
+{
+ int status;
+ char zero_mac_addr[ETH_ALEN];
+ char *addr;
+
+ if (set) {
+ addr = &qdev->ndev->dev_addr[0];
+ QPRINTK(qdev, IFUP, DEBUG,
+ "Set Mac addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+ addr[0], addr[1], addr[2], addr[3],
+ addr[4], addr[5]);
+ } else {
+ memset(zero_mac_addr, 0, ETH_ALEN);
+ addr = &zero_mac_addr[0];
+ QPRINTK(qdev, IFUP, DEBUG,
+ "Clearing MAC address on %s\n",
+ qdev->ndev->name);
+ }
+ status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+ if (status)
+ return status;
+ status = ql_set_mac_addr_reg(qdev, (u8 *) addr,
+ MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
+ ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+ if (status)
+ QPRINTK(qdev, IFUP, ERR, "Failed to init mac "
+ "address.\n");
+ return status;
+}
+
+void ql_link_on(struct ql_adapter *qdev)
+{
+ QPRINTK(qdev, LINK, ERR, "%s: Link is up.\n",
+ qdev->ndev->name);
+ netif_carrier_on(qdev->ndev);
+ ql_set_mac_addr(qdev, 1);
+}
+
+void ql_link_off(struct ql_adapter *qdev)
+{
+ QPRINTK(qdev, LINK, ERR, "%s: Link is down.\n",
+ qdev->ndev->name);
+ netif_carrier_off(qdev->ndev);
+ ql_set_mac_addr(qdev, 0);
+}
+
/* Get a specific frame routing value from the CAM.
* Used for debug and reg dump.
*/
@@ -1628,7 +1680,7 @@
tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
tx_ring_desc = &tx_ring->q[mac_rsp->tid];
ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
- qdev->stats.tx_bytes += tx_ring_desc->map_cnt;
+ qdev->stats.tx_bytes += (tx_ring_desc->skb)->len;
qdev->stats.tx_packets++;
dev_kfree_skb(tx_ring_desc->skb);
tx_ring_desc->skb = NULL;
@@ -1660,13 +1712,13 @@
/* Fire up a handler to reset the MPI processor. */
void ql_queue_fw_error(struct ql_adapter *qdev)
{
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
}
void ql_queue_asic_error(struct ql_adapter *qdev)
{
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
ql_disable_interrupts(qdev);
/* Clear adapter up bit to signal the recovery
* process that it shouldn't kill the reset worker
@@ -2104,7 +2156,7 @@
}
tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
mac_iocb_ptr = tx_ring_desc->queue_entry;
- memset((void *)mac_iocb_ptr, 0, sizeof(mac_iocb_ptr));
+ memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr));
mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
mac_iocb_ptr->tid = tx_ring_desc->index;
@@ -2743,7 +2795,7 @@
ql_init_tx_ring(qdev, tx_ring);
- err = ql_write_cfg(qdev, wqicb, sizeof(wqicb), CFG_LRQ,
+ err = ql_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
(u16) tx_ring->wq_id);
if (err) {
QPRINTK(qdev, IFUP, ERR, "Failed to load tx_ring.\n");
@@ -3008,7 +3060,7 @@
int i;
u8 *hash_id = (u8 *) ricb->hash_cq_id;
- memset((void *)ricb, 0, sizeof(ricb));
+ memset((void *)ricb, 0, sizeof(*ricb));
ricb->base_cq = qdev->rss_ring_first_cq_id | RSS_L4K;
ricb->flags =
@@ -3030,7 +3082,7 @@
QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
- status = ql_write_cfg(qdev, ricb, sizeof(ricb), CFG_LR, 0);
+ status = ql_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
if (status) {
QPRINTK(qdev, IFUP, ERR, "Failed to load RICB.\n");
return status;
@@ -3039,25 +3091,40 @@
return status;
}
+static int ql_clear_routing_entries(struct ql_adapter *qdev)
+{
+ int i, status = 0;
+
+ status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+ if (status)
+ return status;
+ /* Clear all the entries in the routing table. */
+ for (i = 0; i < 16; i++) {
+ status = ql_set_routing_reg(qdev, i, 0, 0);
+ if (status) {
+ QPRINTK(qdev, IFUP, ERR,
+ "Failed to init routing register for CAM "
+ "packets.\n");
+ break;
+ }
+ }
+ ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+ return status;
+}
+
/* Initialize the frame-to-queue routing. */
static int ql_route_initialize(struct ql_adapter *qdev)
{
int status = 0;
- int i;
status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
if (status)
return status;
/* Clear all the entries in the routing table. */
- for (i = 0; i < 16; i++) {
- status = ql_set_routing_reg(qdev, i, 0, 0);
- if (status) {
- QPRINTK(qdev, IFUP, ERR,
- "Failed to init routing register for CAM packets.\n");
- goto exit;
- }
- }
+ status = ql_clear_routing_entries(qdev);
+ if (status)
+ goto exit;
status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
if (status) {
@@ -3096,14 +3163,15 @@
int ql_cam_route_initialize(struct ql_adapter *qdev)
{
- int status;
+ int status, set;
- status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
- if (status)
- return status;
- status = ql_set_mac_addr_reg(qdev, (u8 *) qdev->ndev->perm_addr,
- MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
- ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+ /* If check if the link is up and use to
+ * determine if we are setting or clearing
+ * the MAC address in the CAM.
+ */
+ set = ql_read32(qdev, STS);
+ set &= qdev->port_link_up;
+ status = ql_set_mac_addr(qdev, set);
if (status) {
QPRINTK(qdev, IFUP, ERR, "Failed to init mac address.\n");
return status;
@@ -3210,9 +3278,17 @@
{
u32 value;
int status = 0;
- unsigned long end_jiffies = jiffies +
- max((unsigned long)1, usecs_to_jiffies(30));
+ unsigned long end_jiffies;
+ /* Clear all the entries in the routing table. */
+ status = ql_clear_routing_entries(qdev);
+ if (status) {
+ QPRINTK(qdev, IFUP, ERR, "Failed to clear routing bits.\n");
+ return status;
+ }
+
+ end_jiffies = jiffies +
+ max((unsigned long)1, usecs_to_jiffies(30));
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
do {
@@ -3252,7 +3328,7 @@
int i, status = 0;
struct rx_ring *rx_ring;
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
/* Don't kill the reset worker thread if we
* are in the process of recovery.
@@ -3319,8 +3395,12 @@
}
set_bit(QL_ADAPTER_UP, &qdev->flags);
ql_alloc_rx_buffers(qdev);
- if ((ql_read32(qdev, STS) & qdev->port_init))
- netif_carrier_on(qdev->ndev);
+ /* If the port is initialized and the
+ * link is up the turn on the carrier.
+ */
+ if ((ql_read32(qdev, STS) & qdev->port_init) &&
+ (ql_read32(qdev, STS) & qdev->port_link_up))
+ ql_link_on(qdev);
ql_enable_interrupts(qdev);
ql_enable_all_completion_interrupts(qdev);
netif_tx_start_all_queues(qdev->ndev);
@@ -3346,11 +3426,6 @@
return -ENOMEM;
}
status = ql_request_irq(qdev);
- if (status)
- goto err_irq;
- return status;
-err_irq:
- ql_free_mem_resources(qdev);
return status;
}
@@ -3414,7 +3489,7 @@
for (i = 0; i < qdev->tx_ring_count; i++) {
tx_ring = &qdev->tx_ring[i];
- memset((void *)tx_ring, 0, sizeof(tx_ring));
+ memset((void *)tx_ring, 0, sizeof(*tx_ring));
tx_ring->qdev = qdev;
tx_ring->wq_id = i;
tx_ring->wq_len = qdev->tx_ring_size;
@@ -3430,7 +3505,7 @@
for (i = 0; i < qdev->rx_ring_count; i++) {
rx_ring = &qdev->rx_ring[i];
- memset((void *)rx_ring, 0, sizeof(rx_ring));
+ memset((void *)rx_ring, 0, sizeof(*rx_ring));
rx_ring->qdev = qdev;
rx_ring->cq_id = i;
rx_ring->cpu = i % cpu_cnt; /* CPU to run handler on. */
@@ -3789,7 +3864,7 @@
int pos, err = 0;
u16 val16;
- memset((void *)qdev, 0, sizeof(qdev));
+ memset((void *)qdev, 0, sizeof(*qdev));
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "PCI device enable failed.\n");
@@ -3976,7 +4051,7 @@
pci_disable_device(pdev);
return err;
}
- netif_carrier_off(ndev);
+ ql_link_off(qdev);
ql_display_dev_info(ndev);
cards_found++;
return 0;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 71afbf8..6685bd9 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -238,7 +238,7 @@
&qdev->mpi_port_cfg_work, 0);
}
- netif_carrier_on(qdev->ndev);
+ ql_link_on(qdev);
}
static void ql_link_down(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -251,7 +251,7 @@
if (status)
QPRINTK(qdev, DRV, ERR, "Link down AEN broken!\n");
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
}
static int ql_sfp_in(struct ql_adapter *qdev, struct mbox_params *mbcp)
@@ -849,7 +849,7 @@
case MB_CMD_PORT_RESET:
case MB_CMD_SET_PORT_CFG:
case MB_CMD_STOP_FW:
- netif_carrier_off(qdev->ndev);
+ ql_link_off(qdev);
/* Signal the resulting link up AEN
* that the frame routing and mac addr
* needs to be set.
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index b60639b..66067f9 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1938,7 +1938,7 @@
if (!res)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, resource_size(res));
iounmap(pdata->ioaddr);
@@ -1976,7 +1976,7 @@
retval = -ENODEV;
goto out_0;
}
- res_size = res->end - res->start + 1;
+ res_size = resource_size(res);
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
@@ -2104,7 +2104,7 @@
out_free_netdev_2:
free_netdev(dev);
out_release_io_1:
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, resource_size(res));
out_0:
return retval;
}
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 11a0ba4..027f7ab 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -486,12 +486,14 @@
{
struct tun_file *tfile = file->private_data;
struct tun_struct *tun = __tun_get(tfile);
- struct sock *sk = tun->sk;
+ struct sock *sk;
unsigned int mask = 0;
if (!tun)
return POLLERR;
+ sk = tun->sk;
+
DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
poll_wait(file, &tun->socket.wait, wait);
@@ -1324,20 +1326,22 @@
struct tun_file *tfile = file->private_data;
struct tun_struct *tun;
-
- rtnl_lock();
tun = __tun_get(tfile);
if (tun) {
- DBG(KERN_INFO "%s: tun_chr_close\n", tun->dev->name);
+ struct net_device *dev = tun->dev;
+
+ DBG(KERN_INFO "%s: tun_chr_close\n", dev->name);
__tun_detach(tun);
/* If desireable, unregister the netdevice. */
- if (!(tun->flags & TUN_PERSIST))
- unregister_netdevice(tun->dev);
-
+ if (!(tun->flags & TUN_PERSIST)) {
+ rtnl_lock();
+ if (dev->reg_state == NETREG_REGISTERED)
+ unregister_netdevice(dev);
+ rtnl_unlock();
+ }
}
- rtnl_unlock();
tun = tfile->tun;
if (tun)
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index b618bd1..48d81d9 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -823,30 +823,30 @@
struct p54_tx_info *range;
unsigned long flags;
- if (unlikely(!skb || !dev || skb_queue_empty(&priv->tx_queue)))
+ if (unlikely(!skb || !dev || !skb_queue_len(&priv->tx_queue)))
return;
- /* There used to be a check here to see if the SKB was on the
- * TX queue or not. This can never happen because all SKBs we
- * see here successfully went through p54_assign_address()
- * which means the SKB is on the ->tx_queue.
+ /*
+ * don't try to free an already unlinked skb
*/
+ if (unlikely((!skb->next) || (!skb->prev)))
+ return;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
info = IEEE80211_SKB_CB(skb);
range = (void *)info->rate_driver_data;
- if (!skb_queue_is_first(&priv->tx_queue, skb)) {
+ if (skb->prev != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_prev(&priv->tx_queue, skb));
+ ni = IEEE80211_SKB_CB(skb->prev);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
- if (!skb_queue_is_last(&priv->tx_queue, skb)) {
+ if (skb->next != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue, skb));
+ ni = IEEE80211_SKB_CB(skb->next);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
__skb_unlink(skb, &priv->tx_queue);
@@ -864,13 +864,15 @@
unsigned long flags;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = priv->tx_queue.next;
+ while (entry != (struct sk_buff *)&priv->tx_queue) {
struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
if (hdr->req_id == req_id) {
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
return entry;
}
+ entry = entry->next;
}
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
return NULL;
@@ -888,22 +890,24 @@
int count, idx;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = (struct sk_buff *) priv->tx_queue.next;
+ while (entry != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
struct p54_hdr *entry_hdr;
struct p54_tx_data *entry_data;
unsigned int pad = 0, frame_len;
range = (void *)info->rate_driver_data;
- if (range->start_addr != addr)
+ if (range->start_addr != addr) {
+ entry = entry->next;
continue;
+ }
- if (!skb_queue_is_last(&priv->tx_queue, entry)) {
+ if (entry->next != (struct sk_buff *)&priv->tx_queue) {
struct ieee80211_tx_info *ni;
struct p54_tx_info *mr;
- ni = IEEE80211_SKB_CB(skb_queue_next(&priv->tx_queue,
- entry));
+ ni = IEEE80211_SKB_CB(entry->next);
mr = (struct p54_tx_info *)ni->rate_driver_data;
}
@@ -1164,21 +1168,23 @@
}
}
- skb_queue_walk(&priv->tx_queue, entry) {
+ entry = priv->tx_queue.next;
+ while (left--) {
u32 hole_size;
info = IEEE80211_SKB_CB(entry);
range = (void *)info->rate_driver_data;
hole_size = range->start_addr - last_addr;
if (!target_skb && hole_size >= len) {
- target_skb = skb_queue_prev(&priv->tx_queue, entry);
+ target_skb = entry->prev;
hole_size -= len;
target_addr = last_addr;
}
largest_hole = max(largest_hole, hole_size);
last_addr = range->end_addr;
+ entry = entry->next;
}
if (!target_skb && priv->rx_end - last_addr >= len) {
- target_skb = skb_peek_tail(&priv->tx_queue);
+ target_skb = priv->tx_queue.prev;
largest_hole = max(largest_hole, priv->rx_end - last_addr - len);
if (!skb_queue_empty(&priv->tx_queue)) {
info = IEEE80211_SKB_CB(target_skb);
@@ -2084,6 +2090,7 @@
static void p54_stop(struct ieee80211_hw *dev)
{
struct p54_common *priv = dev->priv;
+ struct sk_buff *skb;
mutex_lock(&priv->conf_mutex);
priv->mode = NL80211_IFTYPE_UNSPECIFIED;
@@ -2098,7 +2105,8 @@
p54_tx_cancel(dev, priv->cached_beacon);
priv->stop(dev);
- skb_queue_purge(&priv->tx_queue);
+ while ((skb = skb_dequeue(&priv->tx_queue)))
+ kfree_skb(skb);
priv->cached_beacon = NULL;
priv->tsf_high32 = priv->tsf_low32 = 0;
mutex_unlock(&priv->conf_mutex);
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index ae3a187..70fdba2 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -78,6 +78,7 @@
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
#define ETH_P_TIPC 0x88CA /* TIPC */
+#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index a2a1814..8c2588e 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -735,12 +735,14 @@
if (!*p)
continue;
token = match_token(p, tokens, args);
- r = match_int(&args[0], &option);
- if (r < 0) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "integer field, but no integer?\n");
- ret = r;
- continue;
+ if (token != Opt_err) {
+ r = match_int(&args[0], &option);
+ if (r < 0) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "integer field, but no integer?\n");
+ ret = r;
+ continue;
+ }
}
switch (token) {
case Opt_port:
diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c
index 4e4d8b5..efe661a 100644
--- a/net/dsa/mv88e6xxx.c
+++ b/net/dsa/mv88e6xxx.c
@@ -418,7 +418,7 @@
int i;
for (i = 0; i < 10; i++) {
- ret = REG_READ(REG_GLOBAL2, 0x1d);
+ ret = REG_READ(REG_GLOBAL, 0x1d);
if ((ret & 0x8000) == 0)
return 0;
}
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 60d918c..0071ee6 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -136,7 +136,8 @@
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
- if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
+ if (xprth + 4 < skb->data ||
+ pskb_may_pull(skb, xprth + 4 - skb->data)) {
__be16 *ports = (__be16 *)xprth;
fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 3883b40..43b3c9f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1916,8 +1916,32 @@
update_lft = 1;
else if (stored_lft <= MIN_VALID_LIFETIME) {
/* valid_lft <= stored_lft is always true */
- /* XXX: IPsec */
- update_lft = 0;
+ /*
+ * RFC 4862 Section 5.5.3e:
+ * "Note that the preferred lifetime of
+ * the corresponding address is always
+ * reset to the Preferred Lifetime in
+ * the received Prefix Information
+ * option, regardless of whether the
+ * valid lifetime is also reset or
+ * ignored."
+ *
+ * So if the preferred lifetime in
+ * this advertisement is different
+ * than what we have stored, but the
+ * valid lifetime is invalid, just
+ * reset prefered_lft.
+ *
+ * We must set the valid lifetime
+ * to the stored lifetime since we'll
+ * be updating the timestamp below,
+ * else we'll set it back to the
+ * minumum.
+ */
+ if (prefered_lft != ifp->prefered_lft) {
+ valid_lft = stored_lft;
+ update_lft = 1;
+ }
} else {
valid_lft = MIN_VALID_LIFETIME;
if (valid_lft < prefered_lft)
@@ -3085,7 +3109,7 @@
spin_unlock(&ifp->lock);
continue;
} else if (age >= ifp->prefered_lft) {
- /* jiffies - ifp->tsamp > age >= ifp->prefered_lft */
+ /* jiffies - ifp->tstamp > age >= ifp->prefered_lft */
int deprecate = 0;
if (!(ifp->flags&IFA_F_DEPRECATED)) {
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index b4b16a4..3a3c677 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -157,7 +157,8 @@
ipv6_addr_copy(&fl->fl6_dst, reverse ? &hdr->saddr : &hdr->daddr);
ipv6_addr_copy(&fl->fl6_src, reverse ? &hdr->daddr : &hdr->saddr);
- while (pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
+ while (nh + offset + 1 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 1 - skb->data)) {
nh = skb_network_header(skb);
exthdr = (struct ipv6_opt_hdr *)(nh + offset);
@@ -177,7 +178,8 @@
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
- if (!onlyproto && pskb_may_pull(skb, nh + offset + 4 - skb->data)) {
+ if (!onlyproto && (nh + offset + 4 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
__be16 *ports = (__be16 *)exthdr;
fl->fl_ip_sport = ports[!!reverse];
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 35ba035..971890d 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -6652,21 +6652,6 @@
finish_wait(sk->sk_sleep, &wait);
}
-static void sctp_sock_rfree_frag(struct sk_buff *skb)
-{
- struct sk_buff *frag;
-
- if (!skb->data_len)
- goto done;
-
- /* Don't forget the fragments. */
- skb_walk_frags(skb, frag)
- sctp_sock_rfree_frag(frag);
-
-done:
- sctp_sock_rfree(skb);
-}
-
static void sctp_skb_set_owner_r_frag(struct sk_buff *skb, struct sock *sk)
{
struct sk_buff *frag;
@@ -6776,7 +6761,6 @@
sctp_skb_for_each(skb, &oldsk->sk_receive_queue, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
- sctp_sock_rfree_frag(skb);
__skb_unlink(skb, &oldsk->sk_receive_queue);
__skb_queue_tail(&newsk->sk_receive_queue, skb);
sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6807,7 +6791,6 @@
sctp_skb_for_each(skb, &oldsp->pd_lobby, tmp) {
event = sctp_skb2event(skb);
if (event->asoc == assoc) {
- sctp_sock_rfree_frag(skb);
__skb_unlink(skb, &oldsp->pd_lobby);
__skb_queue_tail(queue, skb);
sctp_skb_set_owner_r_frag(skb, newsk);
@@ -6822,15 +6805,11 @@
}
- sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp) {
- sctp_sock_rfree_frag(skb);
+ sctp_skb_for_each(skb, &assoc->ulpq.reasm, tmp)
sctp_skb_set_owner_r_frag(skb, newsk);
- }
- sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp) {
- sctp_sock_rfree_frag(skb);
+ sctp_skb_for_each(skb, &assoc->ulpq.lobby, tmp)
sctp_skb_set_owner_r_frag(skb, newsk);
- }
/* Set the type of socket to indicate that it is peeled off from the
* original UDP-style socket or created with the accept() call on a