rt2x00: rt2800pci: use separate ops for the SoC driver
This makes it possible to use different callback
functions for PCI and SoC devices which will allow
to move the SoC driver into a separate module.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 5ae90df6..344a73d 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -356,6 +356,7 @@
return retval;
}
+#ifdef CONFIG_PCI
static const struct ieee80211_ops rt2800pci_mac80211_ops = {
.tx = rt2x00mac_tx,
.start = rt2x00mac_start,
@@ -459,7 +460,6 @@
/*
* RT2800pci module information.
*/
-#ifdef CONFIG_PCI
static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
{ PCI_DEVICE(0x1814, 0x0601) },
{ PCI_DEVICE(0x1814, 0x0681) },
@@ -517,9 +517,109 @@
MODULE_LICENSE("GPL");
#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
+static const struct ieee80211_ops rt2800soc_mac80211_ops = {
+ .tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
+ .add_interface = rt2x00mac_add_interface,
+ .remove_interface = rt2x00mac_remove_interface,
+ .config = rt2x00mac_config,
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
+ .get_stats = rt2x00mac_get_stats,
+ .get_tkip_seq = rt2800_get_tkip_seq,
+ .set_rts_threshold = rt2800_set_rts_threshold,
+ .sta_add = rt2x00mac_sta_add,
+ .sta_remove = rt2x00mac_sta_remove,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2800_conf_tx,
+ .get_tsf = rt2800_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
+ .ampdu_action = rt2800_ampdu_action,
+ .flush = rt2x00mac_flush,
+ .get_survey = rt2800_get_survey,
+ .get_ringparam = rt2x00mac_get_ringparam,
+ .tx_frames_pending = rt2x00mac_tx_frames_pending,
+};
+
+static const struct rt2800_ops rt2800soc_rt2800_ops = {
+ .register_read = rt2x00mmio_register_read,
+ .register_read_lock = rt2x00mmio_register_read, /* same for SoCs */
+ .register_write = rt2x00mmio_register_write,
+ .register_write_lock = rt2x00mmio_register_write, /* same for SoCs */
+ .register_multiread = rt2x00mmio_register_multiread,
+ .register_multiwrite = rt2x00mmio_register_multiwrite,
+ .regbusy_read = rt2x00mmio_regbusy_read,
+ .read_eeprom = rt2800pci_read_eeprom,
+ .hwcrypt_disabled = rt2800pci_hwcrypt_disabled,
+ .drv_write_firmware = rt2800pci_write_firmware,
+ .drv_init_registers = rt2800mmio_init_registers,
+ .drv_get_txwi = rt2800mmio_get_txwi,
+};
+
+static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
+ .irq_handler = rt2800mmio_interrupt,
+ .txstatus_tasklet = rt2800mmio_txstatus_tasklet,
+ .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet,
+ .tbtt_tasklet = rt2800mmio_tbtt_tasklet,
+ .rxdone_tasklet = rt2800mmio_rxdone_tasklet,
+ .autowake_tasklet = rt2800mmio_autowake_tasklet,
+ .probe_hw = rt2800_probe_hw,
+ .get_firmware_name = rt2800pci_get_firmware_name,
+ .check_firmware = rt2800_check_firmware,
+ .load_firmware = rt2800_load_firmware,
+ .initialize = rt2x00mmio_initialize,
+ .uninitialize = rt2x00mmio_uninitialize,
+ .get_entry_state = rt2800mmio_get_entry_state,
+ .clear_entry = rt2800mmio_clear_entry,
+ .set_device_state = rt2800pci_set_device_state,
+ .rfkill_poll = rt2800_rfkill_poll,
+ .link_stats = rt2800_link_stats,
+ .reset_tuner = rt2800_reset_tuner,
+ .link_tuner = rt2800_link_tuner,
+ .gain_calibration = rt2800_gain_calibration,
+ .vco_calibration = rt2800_vco_calibration,
+ .start_queue = rt2800mmio_start_queue,
+ .kick_queue = rt2800mmio_kick_queue,
+ .stop_queue = rt2800mmio_stop_queue,
+ .flush_queue = rt2x00mmio_flush_queue,
+ .write_tx_desc = rt2800mmio_write_tx_desc,
+ .write_tx_data = rt2800_write_tx_data,
+ .write_beacon = rt2800_write_beacon,
+ .clear_beacon = rt2800_clear_beacon,
+ .fill_rxdone = rt2800mmio_fill_rxdone,
+ .config_shared_key = rt2800_config_shared_key,
+ .config_pairwise_key = rt2800_config_pairwise_key,
+ .config_filter = rt2800_config_filter,
+ .config_intf = rt2800_config_intf,
+ .config_erp = rt2800_config_erp,
+ .config_ant = rt2800_config_ant,
+ .config = rt2800_config,
+ .sta_add = rt2800_sta_add,
+ .sta_remove = rt2800_sta_remove,
+};
+
+static const struct rt2x00_ops rt2800soc_ops = {
+ .name = KBUILD_MODNAME,
+ .drv_data_size = sizeof(struct rt2800_drv_data),
+ .max_ap_intf = 8,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .queue_init = rt2800mmio_queue_init,
+ .lib = &rt2800soc_rt2x00_ops,
+ .drv = &rt2800soc_rt2800_ops,
+ .hw = &rt2800soc_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+ .debugfs = &rt2800_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
static int rt2800soc_probe(struct platform_device *pdev)
{
- return rt2x00soc_probe(pdev, &rt2800pci_ops);
+ return rt2x00soc_probe(pdev, &rt2800soc_ops);
}
static struct platform_driver rt2800soc_driver = {