drm/i915/kbl: Introduce Kabylake platform defition.
Kabylake is a Intel® Processor containing Intel® HD Graphics
following Skylake.
It is Gen9p5, so it inherits everything from Skylake.
Let's start by adding the platform separated from Skylake
but reusing most of all features, functions etc. Later we
rebase the PCI-ID patch without is_skylake=1
so we don't replace what original Author did there.
Few IS_SKYLAKEs if statements are not being covered by this patch
on purpose:
- Workarounds: Kabylake is derivated from Skylake H0 so no
W/As apply here.
- GuC: A following patch removes Kabylake support with an
explanation: No firmware available yet.
- DMC/CSR: Done in a separated patch since we need to be carefull
and load the version for revision 7 since
Kabylake is Skylake H0.
v2: relative cleaner commit message and added the missed
IS_KABYLAKE to intel_i2c.c as pointed out by Jani.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 3f8c15c..a484d8d 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1253,18 +1253,21 @@
max_freq = (IS_BROXTON(dev) ? rp_state_cap >> 0 :
rp_state_cap >> 16) & 0xff;
- max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
+ max_freq *= (IS_SKYLAKE(dev) || IS_KABYLAKE(dev) ?
+ GEN9_FREQ_SCALER : 1);
seq_printf(m, "Lowest (RPN) frequency: %dMHz\n",
intel_gpu_freq(dev_priv, max_freq));
max_freq = (rp_state_cap & 0xff00) >> 8;
- max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
+ max_freq *= (IS_SKYLAKE(dev) || IS_KABYLAKE(dev) ?
+ GEN9_FREQ_SCALER : 1);
seq_printf(m, "Nominal (RP1) frequency: %dMHz\n",
intel_gpu_freq(dev_priv, max_freq));
max_freq = (IS_BROXTON(dev) ? rp_state_cap >> 16 :
rp_state_cap >> 0) & 0xff;
- max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
+ max_freq *= (IS_SKYLAKE(dev) || IS_KABYLAKE(dev) ?
+ GEN9_FREQ_SCALER : 1);
seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n",
intel_gpu_freq(dev_priv, max_freq));
seq_printf(m, "Max overclocked frequency: %dMHz\n",
@@ -1802,7 +1805,7 @@
if (ret)
goto out;
- if (IS_SKYLAKE(dev)) {
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
/* Convert GT frequency to 50 HZ units */
min_gpu_freq =
dev_priv->rps.min_freq_softlimit / GEN9_FREQ_SCALER;
@@ -1822,7 +1825,8 @@
&ia_freq);
seq_printf(m, "%d\t\t%d\t\t\t\t%d\n",
intel_gpu_freq(dev_priv, (gpu_freq *
- (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1))),
+ (IS_SKYLAKE(dev) || IS_KABYLAKE(dev) ?
+ GEN9_FREQ_SCALER : 1))),
((ia_freq >> 0) & 0xff) * 100,
((ia_freq >> 8) & 0xff) * 100);
}
@@ -5030,7 +5034,7 @@
stat->slice_total++;
- if (IS_SKYLAKE(dev))
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
ss_cnt = INTEL_INFO(dev)->subslice_per_slice;
for (ss = 0; ss < ss_max; ss++) {
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 499060a..55d1064 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -697,7 +697,8 @@
* supports EU power gating on devices with more than one EU
* pair per subslice.
*/
- info->has_slice_pg = (IS_SKYLAKE(dev) && (info->slice_total > 1));
+ info->has_slice_pg = ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
+ (info->slice_total > 1));
info->has_subslice_pg = (IS_BROXTON(dev) && (info->subslice_total > 1));
info->has_eu_pg = (info->eu_per_subslice > 2);
}
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 64b3fa8..7b29aee 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -395,6 +395,36 @@
IVB_CURSOR_OFFSETS,
};
+static const struct intel_device_info intel_kabylake_info = {
+ .is_preliminary = 1,
+ .is_kabylake = 1,
+ .gen = 9,
+ .num_pipes = 3,
+ .need_gfx_hws = 1, .has_hotplug = 1,
+ .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+ .has_llc = 1,
+ .has_ddi = 1,
+ .has_fpga_dbg = 1,
+ .has_fbc = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
+ IVB_CURSOR_OFFSETS,
+};
+
+static const struct intel_device_info intel_kabylake_gt3_info = {
+ .is_preliminary = 1,
+ .is_kabylake = 1,
+ .gen = 9,
+ .num_pipes = 3,
+ .need_gfx_hws = 1, .has_hotplug = 1,
+ .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+ .has_llc = 1,
+ .has_ddi = 1,
+ .has_fpga_dbg = 1,
+ .has_fbc = 1,
+ GEN_DEFAULT_PIPEOFFSETS,
+ IVB_CURSOR_OFFSETS,
+};
+
/*
* Make sure any device matches here are from most specific to most
* general. For example, since the Quanta match is based on the subsystem
@@ -461,7 +491,7 @@
} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
ret = PCH_LPT;
DRM_DEBUG_KMS("Assuming LynxPoint PCH\n");
- } else if (IS_SKYLAKE(dev)) {
+ } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
ret = PCH_SPT;
DRM_DEBUG_KMS("Assuming SunrisePoint PCH\n");
}
@@ -524,11 +554,13 @@
} else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_SPT;
DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
- WARN_ON(!IS_SKYLAKE(dev));
+ WARN_ON(!IS_SKYLAKE(dev) &&
+ !IS_KABYLAKE(dev));
} else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
dev_priv->pch_type = PCH_SPT;
DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
- WARN_ON(!IS_SKYLAKE(dev));
+ WARN_ON(!IS_SKYLAKE(dev) &&
+ !IS_KABYLAKE(dev));
} else if (id == INTEL_PCH_P2X_DEVICE_ID_TYPE) {
dev_priv->pch_type = intel_virt_detect_pch(dev);
} else
@@ -836,7 +868,7 @@
if (IS_BROXTON(dev))
ret = bxt_resume_prepare(dev_priv);
- else if (IS_SKYLAKE(dev_priv))
+ else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
ret = skl_resume_prepare(dev_priv);
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
hsw_disable_pc8(dev_priv);
@@ -1583,7 +1615,7 @@
if (IS_BROXTON(dev))
ret = bxt_resume_prepare(dev_priv);
- else if (IS_SKYLAKE(dev))
+ else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
ret = skl_resume_prepare(dev_priv);
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
hsw_disable_pc8(dev_priv);
@@ -1627,7 +1659,7 @@
if (IS_BROXTON(dev_priv))
ret = bxt_suspend_complete(dev_priv);
- else if (IS_SKYLAKE(dev_priv))
+ else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
ret = skl_suspend_complete(dev_priv);
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
ret = hsw_suspend_complete(dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 1f8ae09..6eaf1e6 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -766,6 +766,7 @@
func(is_haswell) sep \
func(is_skylake) sep \
func(is_broxton) sep \
+ func(is_kabylake) sep \
func(is_preliminary) sep \
func(has_fbc) sep \
func(has_pipe_cxsr) sep \
@@ -2478,6 +2479,7 @@
#define IS_BROADWELL(dev) (!INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev))
#define IS_SKYLAKE(dev) (INTEL_INFO(dev)->is_skylake)
#define IS_BROXTON(dev) (INTEL_INFO(dev)->is_broxton)
+#define IS_KABYLAKE(dev) (INTEL_INFO(dev)->is_kabylake)
#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
#define IS_HSW_EARLY_SDV(dev) (IS_HASWELL(dev) && \
(INTEL_DEVID(dev) & 0xFF00) == 0x0C00)
@@ -2598,10 +2600,10 @@
#define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg)
#define HAS_PSR(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev) || \
IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || \
- IS_SKYLAKE(dev))
+ IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
#define HAS_RUNTIME_PM(dev) (IS_GEN6(dev) || IS_HASWELL(dev) || \
IS_BROADWELL(dev) || IS_VALLEYVIEW(dev) || \
- IS_SKYLAKE(dev))
+ IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
#define HAS_RC6(dev) (INTEL_INFO(dev)->gen >= 6)
#define HAS_RC6p(dev) (INTEL_INFO(dev)->gen == 6 || IS_IVYBRIDGE(dev))
diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index cdacf3f..598ed2f 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -433,7 +433,8 @@
&reserved_size);
break;
default:
- if (IS_BROADWELL(dev_priv) || IS_SKYLAKE(dev_priv))
+ if (IS_BROADWELL(dev_priv) ||
+ IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev))
bdw_get_stolen_reserved(dev_priv, &reserved_base,
&reserved_size);
else
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index 56c2f54..7ee91fd 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -591,7 +591,7 @@
struct drm_i915_private *dev_priv = dev_to_i915(dev);
u32 tmp;
- if (!IS_SKYLAKE(dev_priv))
+ if (!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv))
return;
/*
@@ -642,10 +642,11 @@
u32 tmp;
int n;
- /* HSW, BDW SKL need this fix */
+ /* HSW, BDW, SKL, KBL need this fix */
if (!IS_SKYLAKE(dev_priv) &&
- !IS_BROADWELL(dev_priv) &&
- !IS_HASWELL(dev_priv))
+ !IS_KABYLAKE(dev_priv) &&
+ !IS_BROADWELL(dev_priv) &&
+ !IS_HASWELL(dev_priv))
return 0;
mutex_lock(&dev_priv->av_mutex);
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index a65bf81..b164122 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -448,7 +448,7 @@
bxt_ddi_vswing_sequence(dev, hdmi_level, port,
INTEL_OUTPUT_HDMI);
return;
- } else if (IS_SKYLAKE(dev)) {
+ } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
ddi_translations_fdi = NULL;
ddi_translations_dp =
skl_get_buf_trans_dp(dev, &n_dp_entries);
@@ -1184,7 +1184,7 @@
if (INTEL_INFO(dev)->gen <= 8)
hsw_ddi_clock_get(encoder, pipe_config);
- else if (IS_SKYLAKE(dev))
+ else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
skl_ddi_clock_get(encoder, pipe_config);
else if (IS_BROXTON(dev))
bxt_ddi_clock_get(encoder, pipe_config);
@@ -1768,7 +1768,7 @@
struct intel_encoder *intel_encoder =
intel_ddi_get_crtc_new_encoder(crtc_state);
- if (IS_SKYLAKE(dev))
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
return skl_ddi_pll_select(intel_crtc, crtc_state,
intel_encoder);
else if (IS_BROXTON(dev))
@@ -2251,7 +2251,7 @@
level = translate_signal_level(signal_levels);
- if (IS_SKYLAKE(dev))
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
skl_ddi_set_iboost(dev, level, port, encoder->type);
else if (IS_BROXTON(dev))
bxt_ddi_vswing_sequence(dev, level, port, encoder->type);
@@ -2274,7 +2274,7 @@
intel_edp_panel_on(intel_dp);
}
- if (IS_SKYLAKE(dev)) {
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
uint32_t dpll = crtc->config->ddi_pll_sel;
uint32_t val;
@@ -2369,7 +2369,7 @@
intel_edp_panel_off(intel_dp);
}
- if (IS_SKYLAKE(dev))
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
I915_WRITE(DPLL_CTRL2, (I915_READ(DPLL_CTRL2) |
DPLL_CTRL2_DDI_CLK_OFF(port)));
else if (INTEL_INFO(dev)->gen < 9)
@@ -2937,14 +2937,14 @@
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t val = I915_READ(LCPLL_CTL);
- if (IS_SKYLAKE(dev))
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
skl_shared_dplls_init(dev_priv);
else if (IS_BROXTON(dev))
bxt_shared_dplls_init(dev_priv);
else
hsw_shared_dplls_init(dev_priv);
- if (IS_SKYLAKE(dev)) {
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
int cdclk_freq;
cdclk_freq = dev_priv->display.get_display_clock_speed(dev);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index db66dae..103cacb 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5292,7 +5292,7 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
- if (IS_SKYLAKE(dev)) {
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
if (limit == SKL_DFSM_CDCLK_LIMIT_675)
@@ -9738,7 +9738,7 @@
port = (tmp & TRANS_DDI_PORT_MASK) >> TRANS_DDI_PORT_SHIFT;
- if (IS_SKYLAKE(dev))
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
skylake_get_ddi_pll(dev_priv, port, pipe_config);
else if (IS_BROXTON(dev))
bxt_get_ddi_pll(dev_priv, port, pipe_config);
@@ -12022,7 +12022,7 @@
pipe_config->dpll_hw_state.pll9,
pipe_config->dpll_hw_state.pll10,
pipe_config->dpll_hw_state.pcsdw12);
- } else if (IS_SKYLAKE(dev)) {
+ } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: "
"ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
pipe_config->ddi_pll_sel,
@@ -14081,7 +14081,7 @@
*/
found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
/* WaIgnoreDDIAStrap: skl */
- if (found || IS_SKYLAKE(dev))
+ if (found || IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
intel_ddi_init(dev, PORT_A);
/* DDI B, C and D detection is indicated by the SFUSE_STRAP
@@ -14097,7 +14097,7 @@
/*
* On SKL we don't have a way to detect DDI-E so we rely on VBT.
*/
- if (IS_SKYLAKE(dev) &&
+ if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) &&
(dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi))
@@ -14537,7 +14537,7 @@
}
/* Returns the core display clock speed */
- if (IS_SKYLAKE(dev))
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
dev_priv->display.get_display_clock_speed =
skylake_get_display_clock_speed;
else if (IS_BROXTON(dev))
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8287df4..1cb1f3f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1023,7 +1023,7 @@
/* On SKL we don't have Aux for port E so we rely on VBT to set
* a proper alternate aux channel.
*/
- if (IS_SKYLAKE(dev) && port == PORT_E) {
+ if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) && port == PORT_E) {
switch (info->alternate_aux_channel) {
case DP_AUX_B:
porte_aux_ctl_reg = DPB_AUX_CH_CTL;
@@ -1210,7 +1210,7 @@
if (IS_BROXTON(dev)) {
*source_rates = bxt_rates;
size = ARRAY_SIZE(bxt_rates);
- } else if (IS_SKYLAKE(dev)) {
+ } else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
*source_rates = skl_rates;
size = ARRAY_SIZE(skl_rates);
} else {
@@ -1530,7 +1530,7 @@
&pipe_config->dp_m2_n2);
}
- if (IS_SKYLAKE(dev) && is_edp(intel_dp))
+ if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) && is_edp(intel_dp))
skl_edp_set_pll_config(pipe_config);
else if (IS_BROXTON(dev))
/* handled in ddi */;
diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c
index cf47352..fda5fc5 100644
--- a/drivers/gpu/drm/i915/intel_fbc.c
+++ b/drivers/gpu/drm/i915/intel_fbc.c
@@ -581,7 +581,8 @@
* reserved range size, so it always assumes the maximum (8mb) is used.
* If we enable FBC using a CFB on that memory range we'll get FIFO
* underruns, even if that range is not reserved by the BIOS. */
- if (IS_BROADWELL(dev_priv) || IS_SKYLAKE(dev_priv))
+ if (IS_BROADWELL(dev_priv) ||
+ IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
end = dev_priv->gtt.stolen_size - 8 * 1024 * 1024;
else
end = dev_priv->gtt.stolen_usable_size;
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 1369fc4..bd58da0 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -74,7 +74,7 @@
{
if (IS_BROXTON(dev_priv))
return &gmbus_pins_bxt[pin];
- else if (IS_SKYLAKE(dev_priv))
+ else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
return &gmbus_pins_skl[pin];
else if (IS_BROADWELL(dev_priv))
return &gmbus_pins_bdw[pin];
@@ -89,7 +89,7 @@
if (IS_BROXTON(dev_priv))
size = ARRAY_SIZE(gmbus_pins_bxt);
- else if (IS_SKYLAKE(dev_priv))
+ else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
size = ARRAY_SIZE(gmbus_pins_skl);
else if (IS_BROADWELL(dev_priv))
size = ARRAY_SIZE(gmbus_pins_bdw);
diff --git a/drivers/gpu/drm/i915/intel_mocs.c b/drivers/gpu/drm/i915/intel_mocs.c
index 6d3c6c0..b258a2a 100644
--- a/drivers/gpu/drm/i915/intel_mocs.c
+++ b/drivers/gpu/drm/i915/intel_mocs.c
@@ -143,7 +143,7 @@
{
bool result = false;
- if (IS_SKYLAKE(dev)) {
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
table->size = ARRAY_SIZE(skylake_mocs_table);
table->table = skylake_mocs_table;
result = true;
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 7b110cd..dd63bba 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4567,7 +4567,8 @@
dev_priv->rps.max_freq = dev_priv->rps.rp0_freq;
dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq;
- if (IS_HASWELL(dev) || IS_BROADWELL(dev) || IS_SKYLAKE(dev)) {
+ if (IS_HASWELL(dev) || IS_BROADWELL(dev) ||
+ IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
ret = sandybridge_pcode_read(dev_priv,
HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
&ddcc_status);
@@ -4579,7 +4580,7 @@
dev_priv->rps.max_freq);
}
- if (IS_SKYLAKE(dev)) {
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
/* Store the frequency values in 16.66 MHZ units, which is
the natural hardware unit for SKL */
dev_priv->rps.rp0_freq *= GEN9_FREQ_SCALER;
@@ -4935,7 +4936,7 @@
/* convert DDR frequency from units of 266.6MHz to bandwidth */
min_ring_freq = mult_frac(min_ring_freq, 8, 3);
- if (IS_SKYLAKE(dev)) {
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
/* Convert GT frequency to 50 HZ units */
min_gpu_freq = dev_priv->rps.min_freq / GEN9_FREQ_SCALER;
max_gpu_freq = dev_priv->rps.max_freq / GEN9_FREQ_SCALER;
@@ -4953,7 +4954,7 @@
int diff = max_gpu_freq - gpu_freq;
unsigned int ia_freq = 0, ring_freq = 0;
- if (IS_SKYLAKE(dev)) {
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
/*
* ring_freq = 2 * GT. ring_freq is in 100MHz units
* No floor required for ring frequency on SKL.
@@ -6081,7 +6082,7 @@
} else if (INTEL_INFO(dev)->gen >= 9) {
gen9_enable_rc6(dev);
gen9_enable_rps(dev);
- if (IS_SKYLAKE(dev))
+ if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
__gen6_update_ring_freq(dev);
} else if (IS_BROADWELL(dev)) {
gen8_enable_rps(dev);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 5892c00..70f7632 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -1831,7 +1831,7 @@
set_power_wells(power_domains, hsw_power_wells);
} else if (IS_BROADWELL(dev_priv->dev)) {
set_power_wells(power_domains, bdw_power_wells);
- } else if (IS_SKYLAKE(dev_priv->dev)) {
+ } else if (IS_SKYLAKE(dev_priv->dev) || IS_KABYLAKE(dev_priv->dev)) {
set_power_wells(power_domains, skl_power_wells);
} else if (IS_BROXTON(dev_priv->dev)) {
set_power_wells(power_domains, bxt_power_wells);