powerpc: Remove all usages of NO_IRQ
NO_IRQ has been == 0 on powerpc for just over ten years (since commit
0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change
platforms to use it")). It's also 0 on most other arches.
Although it's fairly harmless, every now and then it causes confusion
when a driver is built on powerpc and another arch which doesn't define
NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least
some of which are to work around that problem.
So we'd like to remove it. This is fairly trivial in the arch code, we
just convert:
if (irq == NO_IRQ) to if (!irq)
if (irq != NO_IRQ) to if (irq)
irq = NO_IRQ; to irq = 0;
return NO_IRQ; to return 0;
And a few other odd cases as well.
At least for now we keep the #define NO_IRQ, because there is driver
code that uses NO_IRQ and the fixes to remove those will go via other
trees.
Note we also change some occurrences in PPC sound drivers, drivers/ps3,
and drivers/macintosh.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index b6819f0..3f041b1 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -236,7 +236,7 @@
unsigned int irq;
irq = irq_create_mapping(NULL, line);
- if (irq != NO_IRQ) {
+ if (!irq) {
dev->interrupt[index].start = irq;
dev->interrupt[index].flags = IORESOURCE_IRQ;
dev->interrupt[index].name = dev_name(&dev->ofdev.dev);
@@ -299,7 +299,7 @@
break;
res = &dev->interrupt[j];
irq = irq_of_parse_and_map(np, i++);
- if (irq == NO_IRQ)
+ if (!irq)
break;
res->start = irq;
res->flags = IORESOURCE_IRQ;
diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 465c522..7755271 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -427,7 +427,7 @@
rm->irq = macio_irq(mdev, 1);
#else
rm->irq = irq_of_parse_and_map(i2s, 1);
- if (rm->irq == NO_IRQ ||
+ if (!rm->irq ||
of_address_to_resource(i2s, 0, &ri2s) ||
of_address_to_resource(i2s, 1, &rdma)) {
printk(KERN_ERR
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index d6f72c8..08edb2c 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -279,7 +279,7 @@
spin_unlock_irqrestore(&smu->lock, flags);
/* Workaround for early calls when irq isn't available */
- if (!smu_irq_inited || smu->db_irq == NO_IRQ)
+ if (!smu_irq_inited || !smu->db_irq)
smu_spinwait_cmd(cmd);
return 0;
@@ -498,8 +498,8 @@
INIT_LIST_HEAD(&smu->cmd_list);
INIT_LIST_HEAD(&smu->cmd_i2c_list);
smu->of_node = np;
- smu->db_irq = NO_IRQ;
- smu->msg_irq = NO_IRQ;
+ smu->db_irq = 0;
+ smu->msg_irq = 0;
/* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a
* 32 bits value safely
@@ -587,13 +587,13 @@
if (smu->db_node) {
smu->db_irq = irq_of_parse_and_map(smu->db_node, 0);
- if (smu->db_irq == NO_IRQ)
+ if (!smu->db_irq)
printk(KERN_ERR "smu: failed to map irq for node %s\n",
smu->db_node->full_name);
}
if (smu->msg_node) {
smu->msg_irq = irq_of_parse_and_map(smu->msg_node, 0);
- if (smu->msg_irq == NO_IRQ)
+ if (!smu->msg_irq)
printk(KERN_ERR "smu: failed to map irq for node %s\n",
smu->msg_node->full_name);
}
@@ -602,23 +602,23 @@
* Try to request the interrupts
*/
- if (smu->db_irq != NO_IRQ) {
+ if (smu->db_irq) {
if (request_irq(smu->db_irq, smu_db_intr,
IRQF_SHARED, "SMU doorbell", smu) < 0) {
printk(KERN_WARNING "SMU: can't "
"request interrupt %d\n",
smu->db_irq);
- smu->db_irq = NO_IRQ;
+ smu->db_irq = 0;
}
}
- if (smu->msg_irq != NO_IRQ) {
+ if (smu->msg_irq) {
if (request_irq(smu->msg_irq, smu_msg_intr,
IRQF_SHARED, "SMU message", smu) < 0) {
printk(KERN_WARNING "SMU: can't "
"request interrupt %d\n",
smu->msg_irq);
- smu->msg_irq = NO_IRQ;
+ smu->msg_irq = 0;
}
}
diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c
index bad1813..2088e23 100644
--- a/drivers/macintosh/via-cuda.c
+++ b/drivers/macintosh/via-cuda.c
@@ -209,7 +209,7 @@
cuda_irq = IRQ_MAC_ADB;
#else
cuda_irq = irq_of_parse_and_map(vias, 0);
- if (cuda_irq == NO_IRQ) {
+ if (!cuda_irq) {
printk(KERN_ERR "via-cuda: can't map interrupts for %s\n",
vias->full_name);
return -ENODEV;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index f8b6d14..91081dc 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -145,7 +145,7 @@
static int pmu_has_adb;
static struct device_node *gpio_node;
static unsigned char __iomem *gpio_reg;
-static int gpio_irq = NO_IRQ;
+static int gpio_irq = 0;
static int gpio_irq_enabled = -1;
static volatile int pmu_suspended;
static spinlock_t pmu_lock;
@@ -402,7 +402,7 @@
batt_req.complete = 1;
irq = irq_of_parse_and_map(vias, 0);
- if (irq == NO_IRQ) {
+ if (!irq) {
printk(KERN_ERR "via-pmu: can't map interrupt\n");
return -ENODEV;
}
@@ -424,7 +424,7 @@
if (gpio_node)
gpio_irq = irq_of_parse_and_map(gpio_node, 0);
- if (gpio_irq != NO_IRQ) {
+ if (gpio_irq) {
if (request_irq(gpio_irq, gpio1_interrupt,
IRQF_NO_SUSPEND, "GPIO1 ADB",
(void *)0))
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index 632701a..b7f300b 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -958,7 +958,7 @@
fail_request_irq:
ps3_vuart_irq_destroy(vuart_bus_priv.virq);
- vuart_bus_priv.virq = NO_IRQ;
+ vuart_bus_priv.virq = 0;
fail_alloc_irq:
kfree(vuart_bus_priv.bmp);
vuart_bus_priv.bmp = NULL;
@@ -982,7 +982,7 @@
free_irq(vuart_bus_priv.virq, &vuart_bus_priv);
ps3_vuart_irq_destroy(vuart_bus_priv.virq);
- vuart_bus_priv.virq = NO_IRQ;
+ vuart_bus_priv.virq = 0;
kfree(vuart_bus_priv.bmp);
vuart_bus_priv.bmp = NULL;