drm/i915: Fix product names and #defines
IGD* isn't a useful name. Replace with the codenames, as sourced from
pci.ids.
Signed-off-by: Adam Jackson <ajax@redhat.com>
[anholt: Fixed up for merge with pineview/ironlake changes]
Signed-off-by: Eric Anholt <eric@anholt.net>
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ca1ba42..e28d6c9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -209,7 +209,7 @@
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
u32 pipestat[2];
- /** splitted irq regs for graphics and display engine on IGDNG,
+ /** splitted irq regs for graphics and display engine on Ironlake,
irq_mask_reg is still used for display irq. */
u32 gt_irq_mask_reg;
u32 gt_irq_enable_reg;
@@ -1010,51 +1010,51 @@
(dev)->pci_device == 0x2E42 || \
IS_GM45(dev))
-#define IS_IGDG(dev) ((dev)->pci_device == 0xa001)
-#define IS_IGDGM(dev) ((dev)->pci_device == 0xa011)
-#define IS_IGD(dev) (IS_IGDG(dev) || IS_IGDGM(dev))
+#define IS_PINEVIEW_G(dev) ((dev)->pci_device == 0xa001)
+#define IS_PINEVIEW_M(dev) ((dev)->pci_device == 0xa011)
+#define IS_PINEVIEW(dev) (IS_PINEVIEW_G(dev) || IS_PINEVIEW_M(dev))
#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \
(dev)->pci_device == 0x29B2 || \
(dev)->pci_device == 0x29D2 || \
- (IS_IGD(dev)))
+ (IS_PINEVIEW(dev)))
-#define IS_IGDNG_D(dev) ((dev)->pci_device == 0x0042)
-#define IS_IGDNG_M(dev) ((dev)->pci_device == 0x0046)
-#define IS_IGDNG(dev) (IS_IGDNG_D(dev) || IS_IGDNG_M(dev))
+#define IS_IRONLAKE_D(dev) ((dev)->pci_device == 0x0042)
+#define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046)
+#define IS_IRONLAKE(dev) (IS_IRONLAKE_D(dev) || IS_IRONLAKE_M(dev))
#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \
IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev) || \
- IS_IGDNG(dev))
+ IS_IRONLAKE(dev))
#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev) || \
- IS_IGD(dev) || IS_IGDNG_M(dev))
+ IS_PINEVIEW(dev) || IS_IRONLAKE_M(dev))
#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev) || \
- IS_IGDNG(dev))
+ IS_IRONLAKE(dev))
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
* rows, which changed the alignment requirements and fence programming.
*/
#define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
IS_I915GM(dev)))
-#define SUPPORTS_DIGITAL_OUTPUTS(dev) (IS_I9XX(dev) && !IS_IGD(dev))
-#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev))
-#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev))
-#define SUPPORTS_EDP(dev) (IS_IGDNG_M(dev))
+#define SUPPORTS_DIGITAL_OUTPUTS(dev) (IS_I9XX(dev) && !IS_PINEVIEW(dev))
+#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
+#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
+#define SUPPORTS_EDP(dev) (IS_IRONLAKE_M(dev))
#define SUPPORTS_TV(dev) (IS_I9XX(dev) && IS_MOBILE(dev) && \
- !IS_IGDNG(dev) && !IS_IGD(dev))
+ !IS_IRONLAKE(dev) && !IS_PINEVIEW(dev))
#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev))
/* dsparb controlled by hw only */
-#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
-#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev))
-#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IRONLAKE(dev))
+#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IRONLAKE(dev))
#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \
(IS_I9XX(dev) || IS_GM45(dev)) && \
- !IS_IGD(dev) && \
- !IS_IGDNG(dev))
-#define I915_HAS_RC6(dev) (IS_I965GM(dev) || IS_GM45(dev) || IS_IGDNG_M(dev))
+ !IS_PINEVIEW(dev) && \
+ !IS_IRONLAKE(dev))
+#define I915_HAS_RC6(dev) (IS_I965GM(dev) || IS_GM45(dev) || IS_IRONLAKE_M(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)