ath9k_hw: Setup MCI calibration using a helper
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 8e70f0b..63089cc 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -925,7 +925,6 @@
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_cal_data *caldata = ah->caldata;
- struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
bool txiqcal_done = false, txclcal_done = false;
bool is_reusable = true, status = true;
bool run_rtt_cal = false, run_agc_cal;
@@ -998,30 +997,8 @@
} else if (caldata && !caldata->done_txiqcal_once)
run_agc_cal = true;
- if (mci && IS_CHAN_2GHZ(chan) &&
- (mci_hw->bt_state == MCI_BT_AWAKE) &&
- run_agc_cal &&
- !(mci_hw->config & ATH_MCI_CONFIG_DISABLE_MCI_CAL)) {
-
- u32 pld[4] = {0, 0, 0, 0};
-
- /* send CAL_REQ only when BT is AWAKE. */
- ath_dbg(common, MCI, "MCI send WLAN_CAL_REQ 0x%x\n",
- mci_hw->wlan_cal_seq);
- MCI_GPM_SET_CAL_TYPE(pld, MCI_GPM_WLAN_CAL_REQ);
- pld[MCI_GPM_WLAN_CAL_W_SEQUENCE] = mci_hw->wlan_cal_seq++;
- ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16, true, false);
-
- /* Wait BT_CAL_GRANT for 50ms */
- ath_dbg(common, MCI, "MCI wait for BT_CAL_GRANT\n");
-
- if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_GRANT, 0, 50000))
- ath_dbg(common, MCI, "MCI got BT_CAL_GRANT\n");
- else {
- is_reusable = false;
- ath_dbg(common, MCI, "\nMCI BT is not responding\n");
- }
- }
+ if (mci && IS_CHAN_2GHZ(chan) && run_agc_cal)
+ ar9003_mci_init_cal_req(ah, &is_reusable);
txiqcal_done = ar9003_hw_tx_iq_cal_run(ah);
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
@@ -1041,19 +1018,8 @@
0, AH_WAIT_TIMEOUT);
}
- if (mci && IS_CHAN_2GHZ(chan) &&
- (mci_hw->bt_state == MCI_BT_AWAKE) &&
- run_agc_cal &&
- !(mci_hw->config & ATH_MCI_CONFIG_DISABLE_MCI_CAL)) {
-
- u32 pld[4] = {0, 0, 0, 0};
-
- ath_dbg(common, MCI, "MCI Send WLAN_CAL_DONE 0x%x\n",
- mci_hw->wlan_cal_done);
- MCI_GPM_SET_CAL_TYPE(pld, MCI_GPM_WLAN_CAL_DONE);
- pld[MCI_GPM_WLAN_CAL_W_SEQUENCE] = mci_hw->wlan_cal_done++;
- ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16, true, false);
- }
+ if (mci && IS_CHAN_2GHZ(chan) && run_agc_cal)
+ ar9003_mci_init_cal_done(ah);
if (rtt && !run_rtt_cal) {
agc_ctrl |= agc_supp_cals;