regulator: s5m8767: Add symbols for hard-coded DVS_RAMP register
Add symbols for hard-coded values of BUCK_RAMP field in DVS_RAMP
register. This simplifies a little the code as register update is called
only once.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 9b14faa..27741df 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -881,31 +881,29 @@
if (s5m8767->buck2_ramp || s5m8767->buck3_ramp
|| s5m8767->buck4_ramp) {
+ unsigned int val;
switch (s5m8767->ramp_delay) {
case 5:
- sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
- 0x40, 0xf0);
+ val = S5M8767_DVS_BUCK_RAMP_5;
break;
case 10:
- sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
- 0x90, 0xf0);
+ val = S5M8767_DVS_BUCK_RAMP_10;
break;
case 25:
- sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
- 0xd0, 0xf0);
+ val = S5M8767_DVS_BUCK_RAMP_25;
break;
case 50:
- sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
- 0xe0, 0xf0);
+ val = S5M8767_DVS_BUCK_RAMP_50;
break;
case 100:
- sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
- 0xf0, 0xf0);
+ val = S5M8767_DVS_BUCK_RAMP_100;
break;
default:
- sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
- 0x90, 0xf0);
+ val = S5M8767_DVS_BUCK_RAMP_10;
}
+ sec_reg_update(s5m8767->iodev, S5M8767_REG_DVSRAMP,
+ val << S5M8767_DVS_BUCK_RAMP_SHIFT,
+ S5M8767_DVS_BUCK_RAMP_MASK);
}
for (i = 0; i < pdata->num_regulators; i++) {