i2c-designware: Push all register reads/writes into the core code.
Move all register manipulation code into the core, also move register
offset definitions to i2c-designware-core.c since the bus specific
portions of the driver no longer need/use them.
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 2938621..dc016e2 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -26,40 +26,6 @@
*
*/
-/*
- * Registers offset
- */
-#define DW_IC_CON 0x0
-#define DW_IC_TAR 0x4
-#define DW_IC_DATA_CMD 0x10
-#define DW_IC_SS_SCL_HCNT 0x14
-#define DW_IC_SS_SCL_LCNT 0x18
-#define DW_IC_FS_SCL_HCNT 0x1c
-#define DW_IC_FS_SCL_LCNT 0x20
-#define DW_IC_INTR_STAT 0x2c
-#define DW_IC_INTR_MASK 0x30
-#define DW_IC_RAW_INTR_STAT 0x34
-#define DW_IC_RX_TL 0x38
-#define DW_IC_TX_TL 0x3c
-#define DW_IC_CLR_INTR 0x40
-#define DW_IC_CLR_RX_UNDER 0x44
-#define DW_IC_CLR_RX_OVER 0x48
-#define DW_IC_CLR_TX_OVER 0x4c
-#define DW_IC_CLR_RD_REQ 0x50
-#define DW_IC_CLR_TX_ABRT 0x54
-#define DW_IC_CLR_RX_DONE 0x58
-#define DW_IC_CLR_ACTIVITY 0x5c
-#define DW_IC_CLR_STOP_DET 0x60
-#define DW_IC_CLR_START_DET 0x64
-#define DW_IC_CLR_GEN_CALL 0x68
-#define DW_IC_ENABLE 0x6c
-#define DW_IC_STATUS 0x70
-#define DW_IC_TXFLR 0x74
-#define DW_IC_RXFLR 0x78
-#define DW_IC_TX_ABRT_SOURCE 0x80
-#define DW_IC_COMP_PARAM_1 0xf4
-#define DW_IC_COMP_TYPE 0xfc
-#define DW_IC_COMP_TYPE_VALUE 0x44570140
#define DW_IC_CON_MASTER 0x1
#define DW_IC_CON_SPEED_STD 0x2
@@ -68,72 +34,7 @@
#define DW_IC_CON_RESTART_EN 0x20
#define DW_IC_CON_SLAVE_DISABLE 0x40
-#define DW_IC_INTR_RX_UNDER 0x001
-#define DW_IC_INTR_RX_OVER 0x002
-#define DW_IC_INTR_RX_FULL 0x004
-#define DW_IC_INTR_TX_OVER 0x008
-#define DW_IC_INTR_TX_EMPTY 0x010
-#define DW_IC_INTR_RD_REQ 0x020
-#define DW_IC_INTR_TX_ABRT 0x040
-#define DW_IC_INTR_RX_DONE 0x080
-#define DW_IC_INTR_ACTIVITY 0x100
-#define DW_IC_INTR_STOP_DET 0x200
-#define DW_IC_INTR_START_DET 0x400
-#define DW_IC_INTR_GEN_CALL 0x800
-#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
- DW_IC_INTR_TX_EMPTY | \
- DW_IC_INTR_TX_ABRT | \
- DW_IC_INTR_STOP_DET)
-
-#define DW_IC_STATUS_ACTIVITY 0x1
-
-#define DW_IC_ERR_TX_ABRT 0x1
-
-/*
- * status codes
- */
-#define STATUS_IDLE 0x0
-#define STATUS_WRITE_IN_PROGRESS 0x1
-#define STATUS_READ_IN_PROGRESS 0x2
-
-#define TIMEOUT 20 /* ms */
-
-/*
- * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
- *
- * only expected abort codes are listed here
- * refer to the datasheet for the full list
- */
-#define ABRT_7B_ADDR_NOACK 0
-#define ABRT_10ADDR1_NOACK 1
-#define ABRT_10ADDR2_NOACK 2
-#define ABRT_TXDATA_NOACK 3
-#define ABRT_GCALL_NOACK 4
-#define ABRT_GCALL_READ 5
-#define ABRT_SBYTE_ACKDET 7
-#define ABRT_SBYTE_NORSTRT 9
-#define ABRT_10B_RD_NORSTRT 10
-#define ABRT_MASTER_DIS 11
-#define ARB_LOST 12
-
-#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
-#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
-#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
-#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
-#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
-#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
-#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
-#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
-#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
-#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
-#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
-
-#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
- DW_IC_TX_ABRT_10ADDR1_NOACK | \
- DW_IC_TX_ABRT_10ADDR2_NOACK | \
- DW_IC_TX_ABRT_TXDATA_NOACK | \
- DW_IC_TX_ABRT_GCALL_NOACK)
/**
* struct dw_i2c_dev - private i2c-designware data
* @dev: driver model device node
@@ -195,3 +96,8 @@
int num);
extern u32 i2c_dw_func(struct i2c_adapter *adap);
extern irqreturn_t i2c_dw_isr(int this_irq, void *dev_id);
+extern void i2c_dw_enable(struct dw_i2c_dev *dev);
+extern void i2c_dw_disable(struct dw_i2c_dev *dev);
+extern void i2c_dw_clear_int(struct dw_i2c_dev *dev);
+extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);