ixgbe: Add support for GET_QUEUES message to get DCB configuration
This patch addresses several issues in regards to the combination of DCB
and SR-IOV. Specifically it allows us to send information to the VF on
which queues it should be using.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index b330a1c..8bf467b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -751,6 +751,45 @@
return -1;
}
+static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
+ u32 *msgbuf, u32 vf)
+{
+ struct net_device *dev = adapter->netdev;
+ struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+ unsigned int default_tc = 0;
+ u8 num_tcs = netdev_get_num_tc(dev);
+
+ /* verify the PF is supporting the correct APIs */
+ switch (adapter->vfinfo[vf].vf_api) {
+ case ixgbe_mbox_api_20:
+ case ixgbe_mbox_api_11:
+ break;
+ default:
+ return -1;
+ }
+
+ /* only allow 1 Tx queue for bandwidth limiting */
+ msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
+ msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
+
+ /* if TCs > 1 determine which TC belongs to default user priority */
+ if (num_tcs > 1)
+ default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
+
+ /* notify VF of need for VLAN tag stripping, and correct queue */
+ if (num_tcs)
+ msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
+ else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
+ msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
+ else
+ msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
+
+ /* notify VF of default queue */
+ msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
+
+ return 0;
+}
+
static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
{
u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
@@ -804,6 +843,9 @@
case IXGBE_VF_API_NEGOTIATE:
retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
break;
+ case IXGBE_VF_GET_QUEUES:
+ retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
+ break;
default:
e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
retval = IXGBE_ERR_MBX;