net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*
Rename the hardware VLAN acceleration features to include "CTAG" to indicate
that they only support CTAGs. Follow up patches will introduce 802.1ad
server provider tagging (STAGs) and require the distinction for hardware not
supporting acclerating both.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
index 20d2085..9624cfe 100644
--- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
+++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
@@ -856,10 +856,10 @@
* Since there is no support for separate rx/tx vlan accel
* enable/disable make sure tx flag is always in same state as rx.
*/
- if (features & NETIF_F_HW_VLAN_RX)
- features |= NETIF_F_HW_VLAN_TX;
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ features |= NETIF_F_HW_VLAN_CTAG_TX;
else
- features &= ~NETIF_F_HW_VLAN_TX;
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
return features;
}
@@ -869,7 +869,7 @@
netdev_features_t changed = dev->features ^ features;
struct adapter *adapter = dev->ml_priv;
- if (changed & NETIF_F_HW_VLAN_RX)
+ if (changed & NETIF_F_HW_VLAN_CTAG_RX)
t1_vlan_mode(adapter, features);
return 0;
@@ -1085,8 +1085,9 @@
netdev->features |= NETIF_F_HIGHDMA;
if (vlan_tso_capable(adapter)) {
netdev->features |=
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- netdev->hw_features |= NETIF_F_HW_VLAN_RX;
+ NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX;
+ netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
/* T204: disable TSO */
if (!(is_T2(adapter)) || bi->port_number != 4) {
diff --git a/drivers/net/ethernet/chelsio/cxgb/sge.c b/drivers/net/ethernet/chelsio/cxgb/sge.c
index 55fe8c9..f85e065 100644
--- a/drivers/net/ethernet/chelsio/cxgb/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb/sge.c
@@ -734,7 +734,7 @@
{
struct sge *sge = adapter->sge;
- if (features & NETIF_F_HW_VLAN_RX)
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
sge->sge_control |= F_VLAN_XTRACT;
else
sge->sge_control &= ~F_VLAN_XTRACT;
diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index 2b5e621..71497e8 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -1181,14 +1181,15 @@
if (adapter->params.rev > 0) {
t3_set_vlan_accel(adapter, 1 << pi->port_id,
- features & NETIF_F_HW_VLAN_RX);
+ features & NETIF_F_HW_VLAN_CTAG_RX);
} else {
/* single control for all ports */
- unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX;
+ unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_CTAG_RX;
for_each_port(adapter, i)
have_vlans |=
- adapter->port[i]->features & NETIF_F_HW_VLAN_RX;
+ adapter->port[i]->features &
+ NETIF_F_HW_VLAN_CTAG_RX;
t3_set_vlan_accel(adapter, 1, have_vlans);
}
@@ -2563,10 +2564,10 @@
* Since there is no support for separate rx/tx vlan accel
* enable/disable make sure tx flag is always in same state as rx.
*/
- if (features & NETIF_F_HW_VLAN_RX)
- features |= NETIF_F_HW_VLAN_TX;
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ features |= NETIF_F_HW_VLAN_CTAG_TX;
else
- features &= ~NETIF_F_HW_VLAN_TX;
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
return features;
}
@@ -2575,7 +2576,7 @@
{
netdev_features_t changed = dev->features ^ features;
- if (changed & NETIF_F_HW_VLAN_RX)
+ if (changed & NETIF_F_HW_VLAN_CTAG_RX)
cxgb_vlan_mode(dev, features);
return 0;
@@ -3288,8 +3289,9 @@
netdev->mem_start = mmio_start;
netdev->mem_end = mmio_start + mmio_len - 1;
netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
- NETIF_F_TSO | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_RX;
- netdev->features |= netdev->hw_features | NETIF_F_HW_VLAN_TX;
+ NETIF_F_TSO | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX;
+ netdev->features |= netdev->hw_features |
+ NETIF_F_HW_VLAN_CTAG_TX;
netdev->vlan_features |= netdev->features & VLAN_FEAT;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index e76cf03..6a6a01a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -559,7 +559,7 @@
* that step explicitly.
*/
ret = t4_set_rxmode(pi->adapter, mb, pi->viid, dev->mtu, -1, -1, -1,
- !!(dev->features & NETIF_F_HW_VLAN_RX), true);
+ !!(dev->features & NETIF_F_HW_VLAN_CTAG_RX), true);
if (ret == 0) {
ret = t4_change_mac(pi->adapter, mb, pi->viid,
pi->xact_addr_filt, dev->dev_addr, true,
@@ -2722,14 +2722,14 @@
netdev_features_t changed = dev->features ^ features;
int err;
- if (!(changed & NETIF_F_HW_VLAN_RX))
+ if (!(changed & NETIF_F_HW_VLAN_CTAG_RX))
return 0;
err = t4_set_rxmode(pi->adapter, pi->adapter->fn, pi->viid, -1,
-1, -1, -1,
- !!(features & NETIF_F_HW_VLAN_RX), true);
+ !!(features & NETIF_F_HW_VLAN_CTAG_RX), true);
if (unlikely(err))
- dev->features = features ^ NETIF_F_HW_VLAN_RX;
+ dev->features = features ^ NETIF_F_HW_VLAN_CTAG_RX;
return err;
}
@@ -5628,7 +5628,7 @@
netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_RXCSUM | NETIF_F_RXHASH |
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
if (highdma)
netdev->hw_features |= NETIF_F_HIGHDMA;
netdev->features |= netdev->hw_features;
diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 7fcac20..73aef76 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -1100,10 +1100,10 @@
* Since there is no support for separate rx/tx vlan accel
* enable/disable make sure tx flag is always in same state as rx.
*/
- if (features & NETIF_F_HW_VLAN_RX)
- features |= NETIF_F_HW_VLAN_TX;
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ features |= NETIF_F_HW_VLAN_CTAG_TX;
else
- features &= ~NETIF_F_HW_VLAN_TX;
+ features &= ~NETIF_F_HW_VLAN_CTAG_TX;
return features;
}
@@ -1114,9 +1114,9 @@
struct port_info *pi = netdev_priv(dev);
netdev_features_t changed = dev->features ^ features;
- if (changed & NETIF_F_HW_VLAN_RX)
+ if (changed & NETIF_F_HW_VLAN_CTAG_RX)
t4vf_set_rxmode(pi->adapter, pi->viid, -1, -1, -1, -1,
- features & NETIF_F_HW_VLAN_TX, 0);
+ features & NETIF_F_HW_VLAN_CTAG_TX, 0);
return 0;
}
@@ -2623,11 +2623,12 @@
netdev->hw_features = NETIF_F_SG | TSO_FLAGS |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
- NETIF_F_HW_VLAN_RX | NETIF_F_RXCSUM;
+ NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_RXCSUM;
netdev->vlan_features = NETIF_F_SG | TSO_FLAGS |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_HIGHDMA;
- netdev->features = netdev->hw_features | NETIF_F_HW_VLAN_TX;
+ netdev->features = netdev->hw_features |
+ NETIF_F_HW_VLAN_CTAG_TX;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;