Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
net/dsa/slave.c
net/dsa/slave.c simply had overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/Changes b/Documentation/Changes
index 6d88630..f447f05 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -43,7 +43,7 @@
o grub 0.93 # grub --version || grub-install --version
o mcelog 0.6 # mcelog --version
o iptables 1.4.2 # iptables -V
-o openssl & libcrypto 1.0.1k # openssl version
+o openssl & libcrypto 1.0.0 # openssl version
Kernel compilation
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
index 391717a..ec96b1f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -4,8 +4,8 @@
interrupt.
Required Properties:
-- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc"
- as fallback
+- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
+ "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
- reg: Base address and size of the controllers memory area
- interrupt-parent: phandle of the parent interrupt controller.
- interrupts: Interrupt specifier for the controllers interrupt.
@@ -13,6 +13,9 @@
- #interrupt-cells : Specifies the number of cells needed to encode interrupt
source, should be 1
+Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
+use ar7240 for all other SoCs.
+
Please refer to interrupts.txt in this directory for details of the common
Interrupt Controllers bindings used by client devices.
@@ -28,3 +31,16 @@
interrupt-controller;
#interrupt-cells = <1>;
};
+
+Another example:
+
+ interrupt-controller@18060010 {
+ compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
+ reg = <0x18060010 0x4>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index d71ef07..a057b75 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -6,6 +6,7 @@
"lsi,zevio-usb"
"qcom,ci-hdrc"
"chipidea,usb2"
+ "xlnx,zynq-usb-2.20a"
- reg: base address and length of the registers
- interrupts: interrupt for the USB controller
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt
index 62328d7..b0e911e 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.txt
@@ -979,20 +979,45 @@
(alternatively, the runtime_suspend() callback will have to check if the
device should really be suspended and return -EAGAIN if that is not the case).
-The runtime PM of PCI devices is disabled by default. It is also blocked by
-pci_pm_init() that runs the pm_runtime_forbid() helper function. If a PCI
-driver implements the runtime PM callbacks and intends to use the runtime PM
-framework provided by the PM core and the PCI subsystem, it should enable this
-feature by executing the pm_runtime_enable() helper function. However, the
-driver should not call the pm_runtime_allow() helper function unblocking
-the runtime PM of the device. Instead, it should allow user space or some
-platform-specific code to do that (user space can do it via sysfs), although
-once it has called pm_runtime_enable(), it must be prepared to handle the
+The runtime PM of PCI devices is enabled by default by the PCI core. PCI
+device drivers do not need to enable it and should not attempt to do so.
+However, it is blocked by pci_pm_init() that runs the pm_runtime_forbid()
+helper function. In addition to that, the runtime PM usage counter of
+each PCI device is incremented by local_pci_probe() before executing the
+probe callback provided by the device's driver.
+
+If a PCI driver implements the runtime PM callbacks and intends to use the
+runtime PM framework provided by the PM core and the PCI subsystem, it needs
+to decrement the device's runtime PM usage counter in its probe callback
+function. If it doesn't do that, the counter will always be different from
+zero for the device and it will never be runtime-suspended. The simplest
+way to do that is by calling pm_runtime_put_noidle(), but if the driver
+wants to schedule an autosuspend right away, for example, it may call
+pm_runtime_put_autosuspend() instead for this purpose. Generally, it
+just needs to call a function that decrements the devices usage counter
+from its probe routine to make runtime PM work for the device.
+
+It is important to remember that the driver's runtime_suspend() callback
+may be executed right after the usage counter has been decremented, because
+user space may already have cuased the pm_runtime_allow() helper function
+unblocking the runtime PM of the device to run via sysfs, so the driver must
+be prepared to cope with that.
+
+The driver itself should not call pm_runtime_allow(), though. Instead, it
+should let user space or some platform-specific code do that (user space can
+do it via sysfs as stated above), but it must be prepared to handle the
runtime PM of the device correctly as soon as pm_runtime_allow() is called
-(which may happen at any time). [It also is possible that user space causes
-pm_runtime_allow() to be called via sysfs before the driver is loaded, so in
-fact the driver has to be prepared to handle the runtime PM of the device as
-soon as it calls pm_runtime_enable().]
+(which may happen at any time, even before the driver is loaded).
+
+When the driver's remove callback runs, it has to balance the decrementation
+of the device's runtime PM usage counter at the probe time. For this reason,
+if it has decremented the counter in its probe callback, it must run
+pm_runtime_get_noresume() in its remove callback. [Since the core carries
+out a runtime resume of the device and bumps up the device's usage counter
+before running the driver's remove callback, the runtime PM of the device
+is effectively disabled for the duration of the remove execution and all
+runtime PM helper functions incrementing the device's usage counter are
+then effectively equivalent to pm_runtime_get_noresume().]
The runtime PM framework works by processing requests to suspend or resume
devices, or to check if they are idle (in which cases it is reasonable to
diff --git a/Documentation/ptp/testptp.c b/Documentation/ptp/testptp.c
index 2bc8abc..6c6247a 100644
--- a/Documentation/ptp/testptp.c
+++ b/Documentation/ptp/testptp.c
@@ -18,6 +18,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define _GNU_SOURCE
+#define __SANE_USERSPACE_TYPES__ /* For PPC64, to get LL64 types */
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>
diff --git a/MAINTAINERS b/MAINTAINERS
index fa43fa2..c22e13e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -615,9 +615,8 @@
F: drivers/hwmon/fam15h_power.c
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-M: Thomas Dahlmann <dahlmann.thomas@arcor.de>
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
-S: Supported
+S: Orphan
F: drivers/usb/gadget/udc/amd5536udc.*
AMD GEODE PROCESSOR/CHIPSET SUPPORT
@@ -3401,7 +3400,6 @@
DIGI EPCA PCI PRODUCTS
M: Lidza Louina <lidza.louina@gmail.com>
-M: Mark Hounschell <markh@compro.net>
M: Daeseok Youn <daeseok.youn@gmail.com>
L: driverdev-devel@linuxdriverproject.org
S: Maintained
@@ -5959,7 +5957,7 @@
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
M: Joerg Roedel <joro@8bytes.org>
L: kvm@vger.kernel.org
-W: http://kvm.qumranet.com
+W: http://www.linux-kvm.org/
S: Maintained
F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
@@ -5967,7 +5965,7 @@
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
M: Alexander Graf <agraf@suse.com>
L: kvm-ppc@vger.kernel.org
-W: http://kvm.qumranet.com
+W: http://www.linux-kvm.org/
T: git git://github.com/agraf/linux-2.6.git
S: Supported
F: arch/powerpc/include/asm/kvm*
@@ -9916,8 +9914,8 @@
STAGING - LUSTRE PARALLEL FILESYSTEM
M: Oleg Drokin <oleg.drokin@intel.com>
M: Andreas Dilger <andreas.dilger@intel.com>
-L: HPDD-discuss@lists.01.org (moderated for non-subscribers)
-W: http://lustre.opensfs.org/
+L: lustre-devel@lists.lustre.org (moderated for non-subscribers)
+W: http://wiki.lustre.org/
S: Maintained
F: drivers/staging/lustre
@@ -11209,7 +11207,7 @@
F: include/linux/vlynq.h
VME SUBSYSTEM
-M: Martyn Welch <martyn.welch@ge.com>
+M: Martyn Welch <martyn@welchs.me.uk>
M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
diff --git a/Makefile b/Makefile
index 84f4b31..1d341eb 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 4d28fc3..5dd084f 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -252,10 +252,10 @@
};
vdd1_reg: regulator@2 {
- /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+ /* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1312500>;
+ regulator-max-microvolt = <1378000>;
regulator-boot-on;
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 3a05b94..568adf5 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -98,13 +98,6 @@
pinctrl-0 = <&extcon_usb1_pins>;
};
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&extcon_usb2_pins>;
- };
-
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
@@ -326,12 +319,6 @@
>;
};
- extcon_usb2_pins: extcon_usb2_pins {
- pinctrl-single,pins = <
- 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
- >;
- };
-
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
@@ -432,7 +419,7 @@
};
ldo3_reg: ldo3 {
- /* VDDA_1V8_PHY */
+ /* VDDA_1V8_PHYA */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -440,6 +427,15 @@
regulator-boot-on;
};
+ ldo4_reg: ldo4 {
+ /* VDDA_1V8_PHYB */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
ldo9_reg: ldo9 {
/* VDD_RTC */
regulator-name = "ldo9";
@@ -495,6 +491,14 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ extcon_usb2: tps659038_usb {
+ compatible = "ti,palmas-usb-vid";
+ ti,enable-vbus-detection;
+ ti,enable-id-detection;
+ id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+ };
+
};
tmp102: tmp102@48 {
@@ -517,7 +521,8 @@
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
+ interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+ <&dra7_pmx_core 0x424>;
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
@@ -579,7 +584,6 @@
pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&ldo1_reg>;
- vmmc_aux-supply = <&vdd_3v3>;
bus-width = <4>;
cd-gpios = <&gpio6 27 0>; /* gpio 219 */
};
@@ -623,6 +627,14 @@
};
&usb2 {
+ /*
+ * Stand alone usage is peripheral only.
+ * However, with some resistor modifications
+ * this port can be used via expansion connectors
+ * as "host" or "dual-role". If so, provide
+ * the necessary dr_mode override in the expansion
+ * board's DT.
+ */
dr_mode = "peripheral";
};
@@ -681,7 +693,7 @@
&hdmi {
status = "ok";
- vdda-supply = <&ldo3_reg>;
+ vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 92bacd3..109fd47 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -19,10 +19,10 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
- phy-mode = "mii";
+ phy-mode = "rgmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
- phy-mode = "mii";
+ phy-mode = "rgmii";
};
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 8c4bbc7..79838dd 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -8,7 +8,7 @@
#include "dm814x.dtsi"
/ {
- model = "DM8148 EVM";
+ model = "HP t410 Smart Zero Client";
compatible = "hp,t410", "ti,dm8148";
memory {
@@ -19,10 +19,10 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
- phy-mode = "mii";
+ phy-mode = "rgmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
- phy-mode = "mii";
+ phy-mode = "rgmii";
};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 972c9c9..7988b42 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -181,9 +181,9 @@
ti,hwmods = "timer3";
};
- control: control@160000 {
+ control: control@140000 {
compatible = "ti,dm814-scm", "simple-bus";
- reg = <0x160000 0x16d000>;
+ reg = <0x140000 0x16d000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x160000 0x16d000>;
@@ -321,9 +321,9 @@
mac-address = [ 00 00 00 00 00 00 ];
};
- phy_sel: cpsw-phy-sel@0x48160650 {
+ phy_sel: cpsw-phy-sel@48140650 {
compatible = "ti,am3352-cpsw-phy-sel";
- reg= <0x48160650 0x4>;
+ reg= <0x48140650 0x4>;
reg-names = "gmii-sel";
};
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 76c739d..8fedddc 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -120,9 +120,10 @@
reg = <0x0 0x1400>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x0 0x1400>;
pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
+ compatible = "ti,pbias-dra7", "ti,pbias-omap";
reg = <0xe00 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap5 {
@@ -1417,7 +1418,7 @@
ti,irqs-safe-map = <0>;
};
- mac: ethernet@4a100000 {
+ mac: ethernet@48484000 {
compatible = "ti,dra7-cpsw","ti,cpsw";
ti,hwmods = "gmac";
clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 2390f38..798dda0 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -56,6 +56,7 @@
reg = <0x270 0x240>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x270 0x240>;
scm_clocks: clocks {
#address-cells = <1>;
@@ -63,7 +64,7 @@
};
pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
+ compatible = "ti,pbias-omap2", "ti,pbias-omap";
reg = <0x230 0x4>;
syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index a547411..67659a0 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -202,7 +202,7 @@
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
- 0x194 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index d5e5cd4..2230e1c 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -78,12 +78,6 @@
>;
};
- smsc9221_pins: pinmux_smsc9221_pins {
- pinctrl-single,pins = <
- 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
- >;
- };
-
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index e458c21..5ad688c 100644
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -156,6 +156,12 @@
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
>;
};
+
+ smsc9221_pins: pinmux_smsc9221_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
+ >;
+ };
};
&omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 69a40cf..8a2b253 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -113,10 +113,22 @@
};
scm_conf: scm_conf@270 {
- compatible = "syscon";
+ compatible = "syscon", "simple-bus";
reg = <0x270 0x330>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x270 0x330>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap3", "ti,pbias-omap";
+ reg = <0x2b0 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
scm_clocks: clocks {
#address-cells = <1>;
@@ -202,17 +214,6 @@
dma-requests = <96>;
};
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0x2b0 0x4>;
- syscon = <&scm_conf>;
- pbias_mmc_reg: pbias_mmc_omap2430 {
- regulator-name = "pbias_mmc_omap2430";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
reg = <0x48310000 0x200>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index abc4473..5a206c1 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -196,9 +196,10 @@
reg = <0x5a0 0x170>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x5a0 0x170>;
pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
+ compatible = "ti,pbias-omap4", "ti,pbias-omap";
reg = <0x60 0x4>;
syscon = <&omap4_padconf_global>;
pbias_mmc_reg: pbias_mmc_omap4 {
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3cc8f35..3cb030f 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -174,8 +174,8 @@
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 4205a8a..4c04389 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -185,9 +185,10 @@
reg = <0x5a0 0xec>;
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0x5a0 0xec>;
pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
+ compatible = "ti,pbias-omap5", "ti,pbias-omap";
reg = <0x60 0x4>;
syscon = <&omap5_padconf_global>;
pbias_mmc_reg: pbias_mmc_omap5 {
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 2fa7a0d..275c78c 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -158,6 +158,7 @@
};
&hdmi {
+ ddc-i2c-bus = <&i2c5>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 3efa3b2..6b914e4 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -103,48 +103,46 @@
<&clk_s_d0_quadfs 0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 0>;
- ranges;
+ };
- sti-hdmi@8d04000 {
- compatible = "st,stih407-hdmi";
- reg = <0x8d04000 0x1000>;
- reg-names = "hdmi-reg";
- interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
- interrupt-names = "irq";
- clock-names = "pix",
- "tmds",
- "phy",
- "audio",
- "main_parent",
- "aux_parent";
+ sti-hdmi@8d04000 {
+ compatible = "st,stih407-hdmi";
+ reg = <0x8d04000 0x1000>;
+ reg-names = "hdmi-reg";
+ interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix",
+ "tmds",
+ "phy",
+ "audio",
+ "main_parent",
+ "aux_parent";
- clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
- <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
- <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
- <&clk_s_d0_flexgen CLK_PCM_0>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>;
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
- reset-names = "hdmi";
- resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
- ddc = <&hdmiddc>;
+ hdmi,hpd-gpio = <&pio5 3>;
+ reset-names = "hdmi";
+ resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+ ddc = <&hdmiddc>;
+ };
- };
-
- sti-hda@8d02000 {
- compatible = "st,stih407-hda";
- reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
- reg-names = "hda-reg", "video-dacs-ctrl";
- clock-names = "pix",
- "hddac",
- "main_parent",
- "aux_parent";
- clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
- <&clk_s_d2_flexgen CLK_HDDAC>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>;
- };
+ sti-hda@8d02000 {
+ compatible = "st,stih407-hda";
+ reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix",
+ "hddac",
+ "main_parent",
+ "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
};
};
};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 6f40bc9..8c6e61a 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -178,48 +178,46 @@
<&clk_s_d0_quadfs 0>,
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 0>;
- ranges;
+ };
- sti-hdmi@8d04000 {
- compatible = "st,stih407-hdmi";
- reg = <0x8d04000 0x1000>;
- reg-names = "hdmi-reg";
- interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
- interrupt-names = "irq";
- clock-names = "pix",
- "tmds",
- "phy",
- "audio",
- "main_parent",
- "aux_parent";
+ sti-hdmi@8d04000 {
+ compatible = "st,stih407-hdmi";
+ reg = <0x8d04000 0x1000>;
+ reg-names = "hdmi-reg";
+ interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix",
+ "tmds",
+ "phy",
+ "audio",
+ "main_parent",
+ "aux_parent";
- clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
- <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
- <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
- <&clk_s_d0_flexgen CLK_PCM_0>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>;
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+ <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+ <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+ <&clk_s_d0_flexgen CLK_PCM_0>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
- reset-names = "hdmi";
- resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
- ddc = <&hdmiddc>;
+ hdmi,hpd-gpio = <&pio5 3>;
+ reset-names = "hdmi";
+ resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+ ddc = <&hdmiddc>;
+ };
- };
-
- sti-hda@8d02000 {
- compatible = "st,stih407-hda";
- reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
- reg-names = "hda-reg", "video-dacs-ctrl";
- clock-names = "pix",
- "hddac",
- "main_parent",
- "aux_parent";
- clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
- <&clk_s_d2_flexgen CLK_HDDAC>,
- <&clk_s_d2_quadfs 0>,
- <&clk_s_d2_quadfs 1>;
- };
+ sti-hda@8d02000 {
+ compatible = "st,stih407-hda";
+ reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix",
+ "hddac",
+ "main_parent",
+ "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+ <&clk_s_d2_flexgen CLK_HDDAC>,
+ <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>;
};
};
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 50c84e1..3f15a5c 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -240,7 +240,8 @@
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_PALMAS=y
CONFIG_W1=m
@@ -350,6 +351,8 @@
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_USB_TI_CPPI41_DMA=y
CONFIG_USB_DWC3=m
CONFIG_USB_TEST=m
CONFIG_AM335X_PHY_USB=y
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 32640c4..7cba573 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -19,7 +19,7 @@
* This may need to be greater than __NR_last_syscall+1 in order to
* account for the padding in the syscall table
*/
-#define __NR_syscalls (388)
+#define __NR_syscalls (392)
/*
* *NOTE*: This is a ghost syscall private to the kernel. Only the
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index 0c3f5a0..7a2a32a1 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -414,6 +414,8 @@
#define __NR_memfd_create (__NR_SYSCALL_BASE+385)
#define __NR_bpf (__NR_SYSCALL_BASE+386)
#define __NR_execveat (__NR_SYSCALL_BASE+387)
+#define __NR_userfaultfd (__NR_SYSCALL_BASE+388)
+#define __NR_membarrier (__NR_SYSCALL_BASE+389)
/*
* The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 05745eb..fde6c88 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -397,6 +397,8 @@
/* 385 */ CALL(sys_memfd_create)
CALL(sys_bpf)
CALL(sys_execveat)
+ CALL(sys_userfaultfd)
+ CALL(sys_membarrier)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 07d2e10..b3a0dff 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -44,10 +44,11 @@
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
+ select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
+ select PM_OPP if PM
config SOC_AM33XX
bool "TI AM33XX"
@@ -70,10 +71,13 @@
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
select ARM_ERRATA_798181 if SMP
+ select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
+ select PM_OPP if PM
config ARCH_OMAP2PLUS
bool
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 24c9afc..6133eaa 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,13 +20,6 @@
#include "common.h"
-#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
-#define intc_of_init NULL
-#endif
-#ifndef CONFIG_ARCH_OMAP4
-#define gic_of_init NULL
-#endif
-
static const struct of_device_id omap_dt_match_table[] __initconst = {
{ .compatible = "simple-bus", },
{ .compatible = "ti,omap-infra", },
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index e3f713f..54a5ba5 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -653,8 +653,12 @@
omap_revision = DRA752_REV_ES1_0;
break;
case 1:
- default:
omap_revision = DRA752_REV_ES1_1;
+ break;
+ case 2:
+ default:
+ omap_revision = DRA752_REV_ES2_0;
+ break;
}
break;
@@ -674,7 +678,7 @@
/* Unknown default to latest silicon rev as default*/
pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",
__func__, idcode, hawkeye, rev);
- omap_revision = DRA752_REV_ES1_1;
+ omap_revision = DRA752_REV_ES2_0;
}
sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 980c937..3eaeaca 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -676,6 +676,7 @@
void __init am43xx_init_late(void)
{
omap_common_late_init();
+ omap2_clk_enable_autoidle_all();
}
#endif
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 4cb8fd9..72ebc4c 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -901,7 +901,8 @@
if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
return 0;
- if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+ if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER &&
+ od->_driver_status != BUS_NOTIFY_BIND_DRIVER) {
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
dev_warn(dev, "%s: enabled but no driver. Idling\n",
__func__);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 425bfcd..b668719 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -103,7 +103,8 @@
#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0)
#define PM_OMAP4_CPU_OSWR_DISABLE (1 << 1)
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) ||\
+ defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX))
extern u16 pm44xx_errata;
#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id))
#else
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index f97654d..2d1d384 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -469,6 +469,8 @@
#define DRA7XX_CLASS 0x07000000
#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
+#define DRA752_REV_ES2_0 (DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
+#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
#define DRA722_REV_ES1_0 (DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
void omap2xxx_check_revision(void);
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e4d8701..a556551 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -297,12 +297,8 @@
if (IS_ERR(src))
return PTR_ERR(src);
- r = clk_set_parent(timer->fclk, src);
- if (r < 0) {
- pr_warn("%s: %s cannot set source\n", __func__, oh->name);
- clk_put(src);
- return r;
- }
+ WARN(clk_set_parent(timer->fclk, src) < 0,
+ "Cannot set timer parent clock, no PLL clock driver?");
clk_put(src);
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index e5a35f6..d44d311 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -300,7 +300,7 @@
val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET);
if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) ||
- (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) {
+ (val & OMAP3430_PRM_POLCTRL_OFFMODE_POL)) {
val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL;
val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL;
pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n",
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index a3ebb51..a727282 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -502,7 +502,7 @@
balloon3_irq_enabled;
do {
struct irq_data *d = irq_desc_get_irq_data(desc);
- struct irq_chip *chip = irq_data_get_chip(d);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned int irq;
/* clear useless edge notification */
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
index d28fe29..07b93fd 100644
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -44,6 +44,13 @@
*/
/*
+ * DFI Bus for NAND, PXA3xx only
+ */
+#define NAND_PHYS 0x43100000
+#define NAND_VIRT IOMEM(0xf6300000)
+#define NAND_SIZE 0x00100000
+
+/*
* Internal Memory Controller (PXA27x and later)
*/
#define IMEMC_PHYS 0x58000000
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index ce0f8d6..06005d3 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -47,6 +47,13 @@
#define ISRAM_START 0x5c000000
#define ISRAM_SIZE SZ_256K
+/*
+ * NAND NFC: DFI bus arbitration subset
+ */
+#define NDCR (*(volatile u32 __iomem*)(NAND_VIRT + 0))
+#define NDCR_ND_ARB_EN (1 << 12)
+#define NDCR_ND_ARB_CNTL (1 << 19)
+
static void __iomem *sram;
static unsigned long wakeup_src;
@@ -362,7 +369,12 @@
.pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
.length = SMEMC_SIZE,
.type = MT_DEVICE
- }
+ }, {
+ .virtual = (unsigned long)NAND_VIRT,
+ .pfn = __phys_to_pfn(NAND_PHYS),
+ .length = NAND_SIZE,
+ .type = MT_DEVICE
+ },
};
void __init pxa3xx_map_io(void)
@@ -419,6 +431,13 @@
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+ /*
+ * Disable DFI bus arbitration, to prevent a system bus lock if
+ * somebody disables the NAND clock (unused clock) while this
+ * bit remains set.
+ */
+ NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;
+
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 9769f1e..00b7f7d 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -365,15 +365,21 @@
user:
if (LDST_L_BIT(instr)) {
unsigned long val;
+ unsigned int __ua_flags = uaccess_save_and_enable();
+
get16t_unaligned_check(val, addr);
+ uaccess_restore(__ua_flags);
/* signed half-word? */
if (instr & 0x40)
val = (signed long)((signed short) val);
regs->uregs[rd] = val;
- } else
+ } else {
+ unsigned int __ua_flags = uaccess_save_and_enable();
put16t_unaligned_check(regs->uregs[rd], addr);
+ uaccess_restore(__ua_flags);
+ }
return TYPE_LDST;
@@ -420,14 +426,21 @@
user:
if (load) {
- unsigned long val;
+ unsigned long val, val2;
+ unsigned int __ua_flags = uaccess_save_and_enable();
+
get32t_unaligned_check(val, addr);
+ get32t_unaligned_check(val2, addr + 4);
+
+ uaccess_restore(__ua_flags);
+
regs->uregs[rd] = val;
- get32t_unaligned_check(val, addr + 4);
- regs->uregs[rd2] = val;
+ regs->uregs[rd2] = val2;
} else {
+ unsigned int __ua_flags = uaccess_save_and_enable();
put32t_unaligned_check(regs->uregs[rd], addr);
put32t_unaligned_check(regs->uregs[rd2], addr + 4);
+ uaccess_restore(__ua_flags);
}
return TYPE_LDST;
@@ -458,10 +471,15 @@
trans:
if (LDST_L_BIT(instr)) {
unsigned int val;
+ unsigned int __ua_flags = uaccess_save_and_enable();
get32t_unaligned_check(val, addr);
+ uaccess_restore(__ua_flags);
regs->uregs[rd] = val;
- } else
+ } else {
+ unsigned int __ua_flags = uaccess_save_and_enable();
put32t_unaligned_check(regs->uregs[rd], addr);
+ uaccess_restore(__ua_flags);
+ }
return TYPE_LDST;
fault:
@@ -531,6 +549,7 @@
#endif
if (user_mode(regs)) {
+ unsigned int __ua_flags = uaccess_save_and_enable();
for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
regbits >>= 1, rd += 1)
if (regbits & 1) {
@@ -542,6 +561,7 @@
put32t_unaligned_check(regs->uregs[rd], eaddr);
eaddr += 4;
}
+ uaccess_restore(__ua_flags);
} else {
for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
regbits >>= 1, rd += 1)
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ad9529c..daa1a65 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -107,7 +107,6 @@
{ .compatible = "mvrl,pxa168-ssp", .data = (void *) PXA168_SSP },
{ .compatible = "mrvl,pxa910-ssp", .data = (void *) PXA910_SSP },
{ .compatible = "mrvl,ce4100-ssp", .data = (void *) CE4100_SSP },
- { .compatible = "mrvl,lpss-ssp", .data = (void *) LPSS_SSP },
{ },
};
MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index 15ecb48..eeb3953 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -293,8 +293,26 @@
return 0;
}
-IRQCHIP_DECLARE(ath79_misc_intc, "qca,ar7100-misc-intc",
- ath79_misc_intc_of_init);
+
+static int __init ar7100_misc_intc_of_init(
+ struct device_node *node, struct device_node *parent)
+{
+ ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
+ return ath79_misc_intc_of_init(node, parent);
+}
+
+IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
+ ar7100_misc_intc_of_init);
+
+static int __init ar7240_misc_intc_of_init(
+ struct device_node *node, struct device_node *parent)
+{
+ ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+ return ath79_misc_intc_of_init(node, parent);
+}
+
+IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
+ ar7240_misc_intc_of_init);
static int __init ar79_cpu_intc_of_init(
struct device_node *node, struct device_node *parent)
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 9801ac9..fe67f12 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -20,6 +20,9 @@
#ifndef cpu_has_tlb
#define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB)
#endif
+#ifndef cpu_has_ftlb
+#define cpu_has_ftlb (cpu_data[0].options & MIPS_CPU_FTLB)
+#endif
#ifndef cpu_has_tlbinv
#define cpu_has_tlbinv (cpu_data[0].options & MIPS_CPU_TLBINV)
#endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index cd89e98..82ad15f 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -385,6 +385,7 @@
#define MIPS_CPU_CDMM 0x4000000000ull /* CPU has Common Device Memory Map */
#define MIPS_CPU_BP_GHIST 0x8000000000ull /* R12K+ Branch Prediction Global History */
#define MIPS_CPU_SP 0x10000000000ull /* Small (1KB) page support */
+#define MIPS_CPU_FTLB 0x20000000000ull /* CPU has Fixed-page-size TLB */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/maar.h b/arch/mips/include/asm/maar.h
index b02891f..21d9607 100644
--- a/arch/mips/include/asm/maar.h
+++ b/arch/mips/include/asm/maar.h
@@ -66,6 +66,15 @@
}
/**
+ * maar_init() - initialise MAARs
+ *
+ * Performs initialisation of MAARs for the current CPU, making use of the
+ * platforms implementation of platform_maar_init where necessary and
+ * duplicating the setup it provides on secondary CPUs.
+ */
+extern void maar_init(void);
+
+/**
* struct maar_config - MAAR configuration data
* @lower: The lowest address that the MAAR pair will affect. Must be
* aligned to a 2^16 byte boundary.
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index d75b75e..1f1927a 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -194,6 +194,7 @@
BUILD_CM_R_(gic_status, MIPS_CM_GCB_OFS + 0xd0)
BUILD_CM_R_(cpc_status, MIPS_CM_GCB_OFS + 0xf0)
BUILD_CM_RW(l2_config, MIPS_CM_GCB_OFS + 0x130)
+BUILD_CM_RW(sys_config2, MIPS_CM_GCB_OFS + 0x150)
/* Core Local & Core Other register accessor functions */
BUILD_CM_Cx_RW(reset_release, 0x00)
@@ -316,6 +317,10 @@
#define CM_GCR_L2_CONFIG_ASSOC_SHF 0
#define CM_GCR_L2_CONFIG_ASSOC_MSK (_ULCAST_(0xff) << 0)
+/* GCR_SYS_CONFIG2 register fields */
+#define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0
+#define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0)
+
/* GCR_Cx_COHERENCE register fields */
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0
#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0)
@@ -405,4 +410,38 @@
return read_gcr_rev();
}
+/**
+ * mips_cm_max_vp_width() - return the width in bits of VP indices
+ *
+ * Return: the width, in bits, of VP indices in fields that combine core & VP
+ * indices.
+ */
+static inline unsigned int mips_cm_max_vp_width(void)
+{
+ extern int smp_num_siblings;
+
+ if (mips_cm_revision() >= CM_REV_CM3)
+ return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK;
+
+ return smp_num_siblings;
+}
+
+/**
+ * mips_cm_vp_id() - calculate the hardware VP ID for a CPU
+ * @cpu: the CPU whose VP ID to calculate
+ *
+ * Hardware such as the GIC uses identifiers for VPs which may not match the
+ * CPU numbers used by Linux. This function calculates the hardware VP
+ * identifier corresponding to a given CPU.
+ *
+ * Return: the VP ID for the CPU.
+ */
+static inline unsigned int mips_cm_vp_id(unsigned int cpu)
+{
+ unsigned int core = cpu_data[cpu].core;
+ unsigned int vp = cpu_vpe_id(&cpu_data[cpu]);
+
+ return (core * mips_cm_max_vp_width()) + vp;
+}
+
#endif /* __MIPS_ASM_MIPS_CM_H__ */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index d3cd8ea..c64781c 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -487,6 +487,8 @@
/* Bits specific to the MIPS32/64 PRA. */
#define MIPS_CONF_MT (_ULCAST_(7) << 7)
+#define MIPS_CONF_MT_TLB (_ULCAST_(1) << 7)
+#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7)
#define MIPS_CONF_AR (_ULCAST_(7) << 10)
#define MIPS_CONF_AT (_ULCAST_(3) << 13)
#define MIPS_CONF_M (_ULCAST_(1) << 31)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 571a8e6..09a51d0 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -410,16 +410,18 @@
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
- int isa;
+ int isa, mt;
config0 = read_c0_config();
/*
* Look for Standard TLB or Dual VTLB and FTLB
*/
- if ((((config0 & MIPS_CONF_MT) >> 7) == 1) ||
- (((config0 & MIPS_CONF_MT) >> 7) == 4))
+ mt = config0 & MIPS_CONF_MT;
+ if (mt == MIPS_CONF_MT_TLB)
c->options |= MIPS_CPU_TLB;
+ else if (mt == MIPS_CONF_MT_FTLB)
+ c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB;
isa = (config0 & MIPS_CONF_AT) >> 13;
switch (isa) {
@@ -559,15 +561,18 @@
if (cpu_has_tlb) {
if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
c->options |= MIPS_CPU_TLBINV;
+
/*
- * This is a bit ugly. R6 has dropped that field from
- * config4 and the only valid configuration is VTLB+FTLB so
- * set a good value for mmuextdef for that case.
+ * R6 has dropped the MMUExtDef field from config4.
+ * On R6 the fields always describe the FTLB, and only if it is
+ * present according to Config.MT.
*/
- if (cpu_has_mips_r6)
+ if (!cpu_has_mips_r6)
+ mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+ else if (cpu_has_ftlb)
mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT;
else
- mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
+ mmuextdef = 0;
switch (mmuextdef) {
case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 35b8316..4795151 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -338,7 +338,7 @@
if (end <= reserved_end)
continue;
#ifdef CONFIG_BLK_DEV_INITRD
- /* mapstart should be after initrd_end */
+ /* Skip zones before initrd and initrd itself */
if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end)))
continue;
#endif
@@ -371,6 +371,14 @@
max_low_pfn = PFN_DOWN(HIGHMEM_START);
}
+#ifdef CONFIG_BLK_DEV_INITRD
+ /*
+ * mapstart should be after initrd_end
+ */
+ if (initrd_end)
+ mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end)));
+#endif
+
/*
* Initialize the boot-time allocator with low memory only.
*/
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index a31896c..bd4385a 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -42,6 +42,7 @@
#include <asm/mmu_context.h>
#include <asm/time.h>
#include <asm/setup.h>
+#include <asm/maar.h>
cpumask_t cpu_callin_map; /* Bitmask of started secondaries */
@@ -157,6 +158,7 @@
mips_clockevent_init();
mp_ops->init_secondary();
cpu_report();
+ maar_init();
/*
* XXX parity protection should be folded in here when it's converted
diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/common/env.c
index f6c44dd..d6d07ad 100644
--- a/arch/mips/loongson64/common/env.c
+++ b/arch/mips/loongson64/common/env.c
@@ -64,6 +64,9 @@
}
if (memsize == 0)
memsize = 256;
+
+ loongson_sysconf.nr_uarts = 1;
+
pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
#else
struct boot_params *boot_p;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 66d0f49..8770e61 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -44,6 +44,7 @@
#include <asm/pgalloc.h>
#include <asm/tlb.h>
#include <asm/fixmap.h>
+#include <asm/maar.h>
/*
* We have up to 8 empty zeroed pages so we can map one of the right colour
@@ -252,6 +253,119 @@
#endif
}
+unsigned __weak platform_maar_init(unsigned num_pairs)
+{
+ struct maar_config cfg[BOOT_MEM_MAP_MAX];
+ unsigned i, num_configured, num_cfg = 0;
+ phys_addr_t skip;
+
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ switch (boot_mem_map.map[i].type) {
+ case BOOT_MEM_RAM:
+ case BOOT_MEM_INIT_RAM:
+ break;
+ default:
+ continue;
+ }
+
+ skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
+
+ cfg[num_cfg].lower = boot_mem_map.map[i].addr;
+ cfg[num_cfg].lower += skip;
+
+ cfg[num_cfg].upper = cfg[num_cfg].lower;
+ cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
+ cfg[num_cfg].upper -= skip;
+
+ cfg[num_cfg].attrs = MIPS_MAAR_S;
+ num_cfg++;
+ }
+
+ num_configured = maar_config(cfg, num_cfg, num_pairs);
+ if (num_configured < num_cfg)
+ pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
+ num_pairs, num_cfg);
+
+ return num_configured;
+}
+
+void maar_init(void)
+{
+ unsigned num_maars, used, i;
+ phys_addr_t lower, upper, attr;
+ static struct {
+ struct maar_config cfgs[3];
+ unsigned used;
+ } recorded = { { { 0 } }, 0 };
+
+ if (!cpu_has_maar)
+ return;
+
+ /* Detect the number of MAARs */
+ write_c0_maari(~0);
+ back_to_back_c0_hazard();
+ num_maars = read_c0_maari() + 1;
+
+ /* MAARs should be in pairs */
+ WARN_ON(num_maars % 2);
+
+ /* Set MAARs using values we recorded already */
+ if (recorded.used) {
+ used = maar_config(recorded.cfgs, recorded.used, num_maars / 2);
+ BUG_ON(used != recorded.used);
+ } else {
+ /* Configure the required MAARs */
+ used = platform_maar_init(num_maars / 2);
+ }
+
+ /* Disable any further MAARs */
+ for (i = (used * 2); i < num_maars; i++) {
+ write_c0_maari(i);
+ back_to_back_c0_hazard();
+ write_c0_maar(0);
+ back_to_back_c0_hazard();
+ }
+
+ if (recorded.used)
+ return;
+
+ pr_info("MAAR configuration:\n");
+ for (i = 0; i < num_maars; i += 2) {
+ write_c0_maari(i);
+ back_to_back_c0_hazard();
+ upper = read_c0_maar();
+
+ write_c0_maari(i + 1);
+ back_to_back_c0_hazard();
+ lower = read_c0_maar();
+
+ attr = lower & upper;
+ lower = (lower & MIPS_MAAR_ADDR) << 4;
+ upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff;
+
+ pr_info(" [%d]: ", i / 2);
+ if (!(attr & MIPS_MAAR_V)) {
+ pr_cont("disabled\n");
+ continue;
+ }
+
+ pr_cont("%pa-%pa", &lower, &upper);
+
+ if (attr & MIPS_MAAR_S)
+ pr_cont(" speculate");
+
+ pr_cont("\n");
+
+ /* Record the setup for use on secondary CPUs */
+ if (used <= ARRAY_SIZE(recorded.cfgs)) {
+ recorded.cfgs[recorded.used].lower = lower;
+ recorded.cfgs[recorded.used].upper = upper;
+ recorded.cfgs[recorded.used].attrs = attr;
+ recorded.used++;
+ }
+ }
+}
+
#ifndef CONFIG_NEED_MULTIPLE_NODES
int page_is_ram(unsigned long pagenr)
{
@@ -334,69 +448,6 @@
#endif
}
-unsigned __weak platform_maar_init(unsigned num_pairs)
-{
- struct maar_config cfg[BOOT_MEM_MAP_MAX];
- unsigned i, num_configured, num_cfg = 0;
- phys_addr_t skip;
-
- for (i = 0; i < boot_mem_map.nr_map; i++) {
- switch (boot_mem_map.map[i].type) {
- case BOOT_MEM_RAM:
- case BOOT_MEM_INIT_RAM:
- break;
- default:
- continue;
- }
-
- skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
-
- cfg[num_cfg].lower = boot_mem_map.map[i].addr;
- cfg[num_cfg].lower += skip;
-
- cfg[num_cfg].upper = cfg[num_cfg].lower;
- cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
- cfg[num_cfg].upper -= skip;
-
- cfg[num_cfg].attrs = MIPS_MAAR_S;
- num_cfg++;
- }
-
- num_configured = maar_config(cfg, num_cfg, num_pairs);
- if (num_configured < num_cfg)
- pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
- num_pairs, num_cfg);
-
- return num_configured;
-}
-
-static void maar_init(void)
-{
- unsigned num_maars, used, i;
-
- if (!cpu_has_maar)
- return;
-
- /* Detect the number of MAARs */
- write_c0_maari(~0);
- back_to_back_c0_hazard();
- num_maars = read_c0_maari() + 1;
-
- /* MAARs should be in pairs */
- WARN_ON(num_maars % 2);
-
- /* Configure the required MAARs */
- used = platform_maar_init(num_maars / 2);
-
- /* Disable any further MAARs */
- for (i = (used * 2); i < num_maars; i++) {
- write_c0_maari(i);
- back_to_back_c0_hazard();
- write_c0_maar(0);
- back_to_back_c0_hazard();
- }
-}
-
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S
index e927260..dabf417 100644
--- a/arch/mips/net/bpf_jit_asm.S
+++ b/arch/mips/net/bpf_jit_asm.S
@@ -64,8 +64,20 @@
PTR_ADDU t1, $r_skb_data, offset
lw $r_A, 0(t1)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
rotr $r_A, t0, 16
+# else
+ sll t0, $r_A, 24
+ srl t1, $r_A, 24
+ srl t2, $r_A, 8
+ or t0, t0, t1
+ andi t2, t2, 0xff00
+ andi t1, $r_A, 0xff00
+ or t0, t0, t2
+ sll t1, t1, 8
+ or $r_A, t0, t1
+# endif
#endif
jr $r_ra
move $r_ret, zero
@@ -80,8 +92,16 @@
PTR_ADDU t1, $r_skb_data, offset
lh $r_A, 0(t1)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_A
seh $r_A, t0
+# else
+ sll t0, $r_A, 24
+ andi t1, $r_A, 0xff00
+ sra t0, t0, 16
+ srl t1, t1, 8
+ or $r_A, t0, t1
+# endif
#endif
jr $r_ra
move $r_ret, zero
@@ -148,23 +168,47 @@
NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
bpf_slow_path_common(4)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
wsbh t0, $r_s0
jr $r_ra
rotr $r_A, t0, 16
-#endif
+# else
+ sll t0, $r_s0, 24
+ srl t1, $r_s0, 24
+ srl t2, $r_s0, 8
+ or t0, t0, t1
+ andi t2, t2, 0xff00
+ andi t1, $r_s0, 0xff00
+ or t0, t0, t2
+ sll t1, t1, 8
jr $r_ra
- move $r_A, $r_s0
+ or $r_A, t0, t1
+# endif
+#else
+ jr $r_ra
+ move $r_A, $r_s0
+#endif
END(bpf_slow_path_word)
NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
bpf_slow_path_common(2)
#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
jr $r_ra
wsbh $r_A, $r_s0
-#endif
+# else
+ sll t0, $r_s0, 8
+ andi t1, $r_s0, 0xff00
+ andi t0, t0, 0xff00
+ srl t1, t1, 8
+ jr $r_ra
+ or $r_A, t0, t1
+# endif
+#else
jr $r_ra
move $r_A, $r_s0
+#endif
END(bpf_slow_path_half)
diff --git a/arch/tile/kernel/usb.c b/arch/tile/kernel/usb.c
index f0da5a2..9f1e05e 100644
--- a/arch/tile/kernel/usb.c
+++ b/arch/tile/kernel/usb.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/usb/tilegx.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <linux/types.h>
static u64 ehci_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index d303318..055a01d 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1128,7 +1128,18 @@
/* Runs on exception stack */
ENTRY(nmi)
+ /*
+ * Fix up the exception frame if we're on Xen.
+ * PARAVIRT_ADJUST_EXCEPTION_FRAME is guaranteed to push at most
+ * one value to the stack on native, so it may clobber the rdx
+ * scratch slot, but it won't clobber any of the important
+ * slots past it.
+ *
+ * Xen is a different story, because the Xen frame itself overlaps
+ * the "NMI executing" variable.
+ */
PARAVIRT_ADJUST_EXCEPTION_FRAME
+
/*
* We allow breakpoints in NMIs. If a breakpoint occurs, then
* the iretq it performs will take us out of NMI context.
@@ -1179,9 +1190,12 @@
* we don't want to enable interrupts, because then we'll end
* up in an awkward situation in which IRQs are on but NMIs
* are off.
+ *
+ * We also must not push anything to the stack before switching
+ * stacks lest we corrupt the "NMI executing" variable.
*/
- SWAPGS
+ SWAPGS_UNSAFE_STACK
cld
movq %rsp, %rdx
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index ab5f1d4..ae68be9 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -86,6 +86,7 @@
extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
u32 type, u64 attribute);
+#ifdef CONFIG_KASAN
/*
* CONFIG_KASAN may redefine memset to __memset. __memset function is present
* only in kernel binary. Since the EFI stub linked into a separate binary it
@@ -95,6 +96,7 @@
#undef memcpy
#undef memset
#undef memmove
+#endif
#endif /* CONFIG_X86_32 */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index b98b471..b8c14bb 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -141,6 +141,8 @@
#define DEBUGCTLMSR_BTS_OFF_USR (1UL << 10)
#define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI (1UL << 11)
+#define MSR_PEBS_FRONTEND 0x000003f7
+
#define MSR_IA32_POWER_CTL 0x000001fc
#define MSR_IA32_MC0_CTL 0x00000400
diff --git a/arch/x86/include/asm/pvclock-abi.h b/arch/x86/include/asm/pvclock-abi.h
index 655e07a..67f0823 100644
--- a/arch/x86/include/asm/pvclock-abi.h
+++ b/arch/x86/include/asm/pvclock-abi.h
@@ -41,6 +41,7 @@
#define PVCLOCK_TSC_STABLE_BIT (1 << 0)
#define PVCLOCK_GUEST_STOPPED (1 << 1)
+/* PVCLOCK_COUNTS_FROM_ZERO broke ABI and can't be used anymore. */
#define PVCLOCK_COUNTS_FROM_ZERO (1 << 2)
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_PVCLOCK_ABI_H */
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 5edf6d8..165be83 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -47,6 +47,7 @@
EXTRA_REG_RSP_1 = 1, /* offcore_response_1 */
EXTRA_REG_LBR = 2, /* lbr_select */
EXTRA_REG_LDLAT = 3, /* ld_lat_threshold */
+ EXTRA_REG_FE = 4, /* fe_* */
EXTRA_REG_MAX /* number of entries needed */
};
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 3fefebf..f63360b 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -205,6 +205,11 @@
INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
+ /*
+ * Note the low 8 bits eventsel code is not a continuous field, containing
+ * some #GPing bits. These are masked out.
+ */
+ INTEL_UEVENT_EXTRA_REG(0x01c6, MSR_PEBS_FRONTEND, 0x7fff17, FE),
EVENT_EXTRA_END
};
@@ -250,7 +255,7 @@
FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
INTEL_UEVENT_CONSTRAINT(0x148, 0x4), /* L1D_PEND_MISS.PENDING */
- INTEL_EVENT_CONSTRAINT(0xa3, 0x4), /* CYCLE_ACTIVITY.* */
+ INTEL_UEVENT_CONSTRAINT(0x8a3, 0x4), /* CYCLE_ACTIVITY.CYCLES_L1D_MISS */
EVENT_CONSTRAINT_END
};
@@ -2891,6 +2896,8 @@
PMU_FORMAT_ATTR(ldlat, "config1:0-15");
+PMU_FORMAT_ATTR(frontend, "config1:0-23");
+
static struct attribute *intel_arch3_formats_attr[] = {
&format_attr_event.attr,
&format_attr_umask.attr,
@@ -2907,6 +2914,11 @@
NULL,
};
+static struct attribute *skl_format_attr[] = {
+ &format_attr_frontend.attr,
+ NULL,
+};
+
static __initconst const struct x86_pmu core_pmu = {
.name = "core",
.handle_irq = x86_pmu_handle_irq,
@@ -3516,7 +3528,8 @@
x86_pmu.hw_config = hsw_hw_config;
x86_pmu.get_event_constraints = hsw_get_event_constraints;
- x86_pmu.cpu_events = hsw_events_attrs;
+ x86_pmu.format_attrs = merge_attr(intel_arch3_formats_attr,
+ skl_format_attr);
WARN_ON(!x86_pmu.format_attrs);
x86_pmu.cpu_events = hsw_events_attrs;
pr_cont("Skylake events, ");
diff --git a/arch/x86/kernel/cpu/perf_event_msr.c b/arch/x86/kernel/cpu/perf_event_msr.c
index 086b12e..f32ac13 100644
--- a/arch/x86/kernel/cpu/perf_event_msr.c
+++ b/arch/x86/kernel/cpu/perf_event_msr.c
@@ -10,12 +10,12 @@
PERF_MSR_EVENT_MAX,
};
-bool test_aperfmperf(int idx)
+static bool test_aperfmperf(int idx)
{
return boot_cpu_has(X86_FEATURE_APERFMPERF);
}
-bool test_intel(int idx)
+static bool test_intel(int idx)
{
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
boot_cpu_data.x86 != 6)
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index f68e48f..c2130ae 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -41,10 +41,18 @@
#include <asm/timer.h>
#include <asm/special_insns.h>
-/* nop stub */
-void _paravirt_nop(void)
-{
-}
+/*
+ * nop stub, which must not clobber anything *including the stack* to
+ * avoid confusing the entry prologues.
+ */
+extern void _paravirt_nop(void);
+asm (".pushsection .entry.text, \"ax\"\n"
+ ".global _paravirt_nop\n"
+ "_paravirt_nop:\n\t"
+ "ret\n\t"
+ ".size _paravirt_nop, . - _paravirt_nop\n\t"
+ ".type _paravirt_nop, @function\n\t"
+ ".popsection");
/* identity function, which can be inlined */
u32 _paravirt_ident_32(u32 x)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 94b7d15..2f9ed1f 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -514,7 +514,7 @@
struct vcpu_svm *svm = to_svm(vcpu);
if (svm->vmcb->control.next_rip != 0) {
- WARN_ON(!static_cpu_has(X86_FEATURE_NRIPS));
+ WARN_ON_ONCE(!static_cpu_has(X86_FEATURE_NRIPS));
svm->next_rip = svm->vmcb->control.next_rip;
}
@@ -866,64 +866,6 @@
set_msr_interception(msrpm, MSR_IA32_LASTINTTOIP, 0, 0);
}
-#define MTRR_TYPE_UC_MINUS 7
-#define MTRR2PROTVAL_INVALID 0xff
-
-static u8 mtrr2protval[8];
-
-static u8 fallback_mtrr_type(int mtrr)
-{
- /*
- * WT and WP aren't always available in the host PAT. Treat
- * them as UC and UC- respectively. Everything else should be
- * there.
- */
- switch (mtrr)
- {
- case MTRR_TYPE_WRTHROUGH:
- return MTRR_TYPE_UNCACHABLE;
- case MTRR_TYPE_WRPROT:
- return MTRR_TYPE_UC_MINUS;
- default:
- BUG();
- }
-}
-
-static void build_mtrr2protval(void)
-{
- int i;
- u64 pat;
-
- for (i = 0; i < 8; i++)
- mtrr2protval[i] = MTRR2PROTVAL_INVALID;
-
- /* Ignore the invalid MTRR types. */
- mtrr2protval[2] = 0;
- mtrr2protval[3] = 0;
-
- /*
- * Use host PAT value to figure out the mapping from guest MTRR
- * values to nested page table PAT/PCD/PWT values. We do not
- * want to change the host PAT value every time we enter the
- * guest.
- */
- rdmsrl(MSR_IA32_CR_PAT, pat);
- for (i = 0; i < 8; i++) {
- u8 mtrr = pat >> (8 * i);
-
- if (mtrr2protval[mtrr] == MTRR2PROTVAL_INVALID)
- mtrr2protval[mtrr] = __cm_idx2pte(i);
- }
-
- for (i = 0; i < 8; i++) {
- if (mtrr2protval[i] == MTRR2PROTVAL_INVALID) {
- u8 fallback = fallback_mtrr_type(i);
- mtrr2protval[i] = mtrr2protval[fallback];
- BUG_ON(mtrr2protval[i] == MTRR2PROTVAL_INVALID);
- }
- }
-}
-
static __init int svm_hardware_setup(void)
{
int cpu;
@@ -990,7 +932,6 @@
} else
kvm_disable_tdp();
- build_mtrr2protval();
return 0;
err:
@@ -1145,43 +1086,6 @@
return target_tsc - tsc;
}
-static void svm_set_guest_pat(struct vcpu_svm *svm, u64 *g_pat)
-{
- struct kvm_vcpu *vcpu = &svm->vcpu;
-
- /* Unlike Intel, AMD takes the guest's CR0.CD into account.
- *
- * AMD does not have IPAT. To emulate it for the case of guests
- * with no assigned devices, just set everything to WB. If guests
- * have assigned devices, however, we cannot force WB for RAM
- * pages only, so use the guest PAT directly.
- */
- if (!kvm_arch_has_assigned_device(vcpu->kvm))
- *g_pat = 0x0606060606060606;
- else
- *g_pat = vcpu->arch.pat;
-}
-
-static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
-{
- u8 mtrr;
-
- /*
- * 1. MMIO: trust guest MTRR, so same as item 3.
- * 2. No passthrough: always map as WB, and force guest PAT to WB as well
- * 3. Passthrough: can't guarantee the result, try to trust guest.
- */
- if (!is_mmio && !kvm_arch_has_assigned_device(vcpu->kvm))
- return 0;
-
- if (!kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED) &&
- kvm_read_cr0(vcpu) & X86_CR0_CD)
- return _PAGE_NOCACHE;
-
- mtrr = kvm_mtrr_get_guest_memory_type(vcpu, gfn);
- return mtrr2protval[mtrr];
-}
-
static void init_vmcb(struct vcpu_svm *svm, bool init_event)
{
struct vmcb_control_area *control = &svm->vmcb->control;
@@ -1278,7 +1182,6 @@
clr_cr_intercept(svm, INTERCEPT_CR3_READ);
clr_cr_intercept(svm, INTERCEPT_CR3_WRITE);
save->g_pat = svm->vcpu.arch.pat;
- svm_set_guest_pat(svm, &save->g_pat);
save->cr3 = 0;
save->cr4 = 0;
}
@@ -1673,10 +1576,13 @@
if (!vcpu->fpu_active)
cr0 |= X86_CR0_TS;
-
- /* These are emulated via page tables. */
- cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
-
+ /*
+ * re-enable caching here because the QEMU bios
+ * does not do it - this results in some delay at
+ * reboot
+ */
+ if (kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_CD_NW_CLEARED))
+ cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
svm->vmcb->save.cr0 = cr0;
mark_dirty(svm->vmcb, VMCB_CR);
update_cr0_intercept(svm);
@@ -3351,16 +3257,6 @@
case MSR_VM_IGNNE:
vcpu_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
break;
- case MSR_IA32_CR_PAT:
- if (npt_enabled) {
- if (!kvm_mtrr_valid(vcpu, MSR_IA32_CR_PAT, data))
- return 1;
- vcpu->arch.pat = data;
- svm_set_guest_pat(svm, &svm->vmcb->save.g_pat);
- mark_dirty(svm->vmcb, VMCB_NPT);
- break;
- }
- /* fall through */
default:
return kvm_set_msr_common(vcpu, msr);
}
@@ -4195,6 +4091,11 @@
return true;
}
+static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
+{
+ return 0;
+}
+
static void svm_cpuid_update(struct kvm_vcpu *vcpu)
{
}
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6407674..06ef490 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -8617,17 +8617,22 @@
u64 ipat = 0;
/* For VT-d and EPT combination
- * 1. MMIO: guest may want to apply WC, trust it.
+ * 1. MMIO: always map as UC
* 2. EPT with VT-d:
* a. VT-d without snooping control feature: can't guarantee the
- * result, try to trust guest. So the same as item 1.
+ * result, try to trust guest.
* b. VT-d with snooping control feature: snooping control feature of
* VT-d engine can guarantee the cache correctness. Just set it
* to WB to keep consistent with host. So the same as item 3.
* 3. EPT without VT-d: always map as WB and set IPAT=1 to keep
* consistent with host MTRR
*/
- if (!is_mmio && !kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
+ if (is_mmio) {
+ cache = MTRR_TYPE_UNCACHABLE;
+ goto exit;
+ }
+
+ if (!kvm_arch_has_noncoherent_dma(vcpu->kvm)) {
ipat = VMX_EPT_IPAT_BIT;
cache = MTRR_TYPE_WRBACK;
goto exit;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 991466b..92511d4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1708,8 +1708,6 @@
vcpu->pvclock_set_guest_stopped_request = false;
}
- pvclock_flags |= PVCLOCK_COUNTS_FROM_ZERO;
-
/* If the host uses TSC clocksource, then it is stable */
if (use_master_clock)
pvclock_flags |= PVCLOCK_TSC_STABLE_BIT;
@@ -2007,8 +2005,6 @@
&vcpu->requests);
ka->boot_vcpu_runs_old_kvmclock = tmp;
-
- ka->kvmclock_offset = -get_kernel_ns();
}
vcpu->arch.time = data;
diff --git a/crypto/asymmetric_keys/x509_public_key.c b/crypto/asymmetric_keys/x509_public_key.c
index 6d88dd1..1970966 100644
--- a/crypto/asymmetric_keys/x509_public_key.c
+++ b/crypto/asymmetric_keys/x509_public_key.c
@@ -332,10 +332,6 @@
srlen = cert->raw_serial_size;
q = cert->raw_serial;
}
- if (srlen > 1 && *q == 0) {
- srlen--;
- q++;
- }
ret = -ENOMEM;
desc = kmalloc(sulen + 2 + srlen * 2 + 1, GFP_KERNEL);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 2614a83..42c66b6 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1044,8 +1044,10 @@
goto err_exit;
mutex_lock(&ec->mutex);
+ result = -ENODATA;
list_for_each_entry(handler, &ec->list, node) {
if (value == handler->query_bit) {
+ result = 0;
q->handler = acpi_ec_get_query_handler(handler);
ec_dbg_evt("Query(0x%02x) scheduled",
q->handler->query_bit);
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 6da0f9b..c933675 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -372,6 +372,7 @@
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF) &&
+ acpi_isa_irq_available(dev->irq) &&
(acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
pin_name(dev->pin), dev->irq);
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 3b4ea98..7c8408b 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -498,8 +498,7 @@
PIRQ_PENALTY_PCI_POSSIBLE;
}
}
- /* Add a penalty for the SCI */
- acpi_irq_penalty[acpi_gbl_FADT.sci_interrupt] += PIRQ_PENALTY_PCI_USING;
+
return 0;
}
@@ -553,6 +552,13 @@
irq = link->irq.possible[i];
}
}
+ if (acpi_irq_penalty[irq] >= PIRQ_PENALTY_ISA_ALWAYS) {
+ printk(KERN_ERR PREFIX "No IRQ available for %s [%s]. "
+ "Try pci=noacpi or acpi=off\n",
+ acpi_device_name(link->device),
+ acpi_device_bid(link->device));
+ return -ENODEV;
+ }
/* Attempt to enable the link device at this IRQ. */
if (acpi_pci_link_set(link, irq)) {
@@ -821,6 +827,12 @@
}
}
+bool acpi_isa_irq_available(int irq)
+{
+ return irq >= 0 && (irq >= ARRAY_SIZE(acpi_irq_penalty) ||
+ acpi_irq_penalty[irq] < PIRQ_PENALTY_ISA_ALWAYS);
+}
+
/*
* Penalize IRQ used by ACPI SCI. If ACPI SCI pin attributes conflict with
* PCI IRQ attributes, mark ACPI SCI as ISA_ALWAYS so it won't be use for
diff --git a/drivers/base/cacheinfo.c b/drivers/base/cacheinfo.c
index 764280a..e9fd32e 100644
--- a/drivers/base/cacheinfo.c
+++ b/drivers/base/cacheinfo.c
@@ -148,7 +148,11 @@
if (sibling == cpu) /* skip itself */
continue;
+
sib_cpu_ci = get_cpu_cacheinfo(sibling);
+ if (!sib_cpu_ci->info_list)
+ continue;
+
sib_leaf = sib_cpu_ci->info_list + index;
cpumask_clear_cpu(cpu, &sib_leaf->shared_cpu_map);
cpumask_clear_cpu(sibling, &this_leaf->shared_cpu_map);
@@ -159,6 +163,9 @@
static void free_cache_attributes(unsigned int cpu)
{
+ if (!per_cpu_cacheinfo(cpu))
+ return;
+
cache_shared_cpu_map_remove(cpu);
kfree(per_cpu_cacheinfo(cpu));
@@ -514,8 +521,7 @@
break;
case CPU_DEAD:
cache_remove_dev(cpu);
- if (per_cpu_cacheinfo(cpu))
- free_cache_attributes(cpu);
+ free_cache_attributes(cpu);
break;
}
return notifier_from_errno(rc);
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 28cd75c..7ae7cd9 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -892,10 +892,17 @@
u32 microvolt[3] = {0};
int count, ret;
- count = of_property_count_u32_elems(opp->np, "opp-microvolt");
- if (!count)
+ /* Missing property isn't a problem, but an invalid entry is */
+ if (!of_find_property(opp->np, "opp-microvolt", NULL))
return 0;
+ count = of_property_count_u32_elems(opp->np, "opp-microvolt");
+ if (count < 0) {
+ dev_err(dev, "%s: Invalid opp-microvolt property (%d)\n",
+ __func__, count);
+ return count;
+ }
+
/* There can be one or three elements here */
if (count != 1 && count != 3) {
dev_err(dev, "%s: Invalid number of elements in opp-microvolt property (%d)\n",
@@ -1063,7 +1070,7 @@
* share a common logic which is isolated here.
*
* Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
- * copy operation, returns 0 if no modifcation was done OR modification was
+ * copy operation, returns 0 if no modification was done OR modification was
* successful.
*
* Locking: The internal device_opp and opp structures are RCU protected.
@@ -1151,7 +1158,7 @@
* mutex locking or synchronize_rcu() blocking calls cannot be used.
*
* Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
- * copy operation, returns 0 if no modifcation was done OR modification was
+ * copy operation, returns 0 if no modification was done OR modification was
* successful.
*/
int dev_pm_opp_enable(struct device *dev, unsigned long freq)
@@ -1177,7 +1184,7 @@
* mutex locking or synchronize_rcu() blocking calls cannot be used.
*
* Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
- * copy operation, returns 0 if no modifcation was done OR modification was
+ * copy operation, returns 0 if no modification was done OR modification was
* successful.
*/
int dev_pm_opp_disable(struct device *dev, unsigned long freq)
diff --git a/drivers/char/hw_random/xgene-rng.c b/drivers/char/hw_random/xgene-rng.c
index c37cf75..3c77645 100644
--- a/drivers/char/hw_random/xgene-rng.c
+++ b/drivers/char/hw_random/xgene-rng.c
@@ -344,11 +344,12 @@
if (IS_ERR(ctx->csr_base))
return PTR_ERR(ctx->csr_base);
- ctx->irq = platform_get_irq(pdev, 0);
- if (ctx->irq < 0) {
+ rc = platform_get_irq(pdev, 0);
+ if (rc < 0) {
dev_err(&pdev->dev, "No IRQ resource\n");
- return ctx->irq;
+ return rc;
}
+ ctx->irq = rc;
dev_dbg(&pdev->dev, "APM X-Gene RNG BASE %p ALARM IRQ %d",
ctx->csr_base, ctx->irq);
diff --git a/drivers/crypto/marvell/cesa.h b/drivers/crypto/marvell/cesa.h
index b60698b..bc2a55b 100644
--- a/drivers/crypto/marvell/cesa.h
+++ b/drivers/crypto/marvell/cesa.h
@@ -687,6 +687,33 @@
int mv_cesa_queue_req(struct crypto_async_request *req);
+/*
+ * Helper function that indicates whether a crypto request needs to be
+ * cleaned up or not after being enqueued using mv_cesa_queue_req().
+ */
+static inline int mv_cesa_req_needs_cleanup(struct crypto_async_request *req,
+ int ret)
+{
+ /*
+ * The queue still had some space, the request was queued
+ * normally, so there's no need to clean it up.
+ */
+ if (ret == -EINPROGRESS)
+ return false;
+
+ /*
+ * The queue had not space left, but since the request is
+ * flagged with CRYPTO_TFM_REQ_MAY_BACKLOG, it was added to
+ * the backlog and will be processed later. There's no need to
+ * clean it up.
+ */
+ if (ret == -EBUSY && req->flags & CRYPTO_TFM_REQ_MAY_BACKLOG)
+ return false;
+
+ /* Request wasn't queued, we need to clean it up */
+ return true;
+}
+
/* TDMA functions */
static inline void mv_cesa_req_dma_iter_init(struct mv_cesa_dma_iter *iter,
diff --git a/drivers/crypto/marvell/cipher.c b/drivers/crypto/marvell/cipher.c
index 0745cf3..3df2f4e 100644
--- a/drivers/crypto/marvell/cipher.c
+++ b/drivers/crypto/marvell/cipher.c
@@ -189,7 +189,6 @@
{
struct ablkcipher_request *ablkreq = ablkcipher_request_cast(req);
struct mv_cesa_ablkcipher_req *creq = ablkcipher_request_ctx(ablkreq);
-
creq->req.base.engine = engine;
if (creq->req.base.type == CESA_DMA_REQ)
@@ -431,7 +430,7 @@
return ret;
ret = mv_cesa_queue_req(&req->base);
- if (ret && ret != -EINPROGRESS)
+ if (mv_cesa_req_needs_cleanup(&req->base, ret))
mv_cesa_ablkcipher_cleanup(req);
return ret;
@@ -551,7 +550,7 @@
return ret;
ret = mv_cesa_queue_req(&req->base);
- if (ret && ret != -EINPROGRESS)
+ if (mv_cesa_req_needs_cleanup(&req->base, ret))
mv_cesa_ablkcipher_cleanup(req);
return ret;
@@ -693,7 +692,7 @@
return ret;
ret = mv_cesa_queue_req(&req->base);
- if (ret && ret != -EINPROGRESS)
+ if (mv_cesa_req_needs_cleanup(&req->base, ret))
mv_cesa_ablkcipher_cleanup(req);
return ret;
diff --git a/drivers/crypto/marvell/hash.c b/drivers/crypto/marvell/hash.c
index ae9272e..e8d0d71 100644
--- a/drivers/crypto/marvell/hash.c
+++ b/drivers/crypto/marvell/hash.c
@@ -739,10 +739,8 @@
return 0;
ret = mv_cesa_queue_req(&req->base);
- if (ret && ret != -EINPROGRESS) {
+ if (mv_cesa_req_needs_cleanup(&req->base, ret))
mv_cesa_ahash_cleanup(req);
- return ret;
- }
return ret;
}
@@ -766,7 +764,7 @@
return 0;
ret = mv_cesa_queue_req(&req->base);
- if (ret && ret != -EINPROGRESS)
+ if (mv_cesa_req_needs_cleanup(&req->base, ret))
mv_cesa_ahash_cleanup(req);
return ret;
@@ -791,7 +789,7 @@
return 0;
ret = mv_cesa_queue_req(&req->base);
- if (ret && ret != -EINPROGRESS)
+ if (mv_cesa_req_needs_cleanup(&req->base, ret))
mv_cesa_ahash_cleanup(req);
return ret;
diff --git a/drivers/crypto/qat/qat_common/adf_aer.c b/drivers/crypto/qat/qat_common/adf_aer.c
index a57b419..0a5ca0b 100644
--- a/drivers/crypto/qat/qat_common/adf_aer.c
+++ b/drivers/crypto/qat/qat_common/adf_aer.c
@@ -88,6 +88,9 @@
struct pci_dev *parent = pdev->bus->self;
uint16_t bridge_ctl = 0;
+ if (accel_dev->is_vf)
+ return;
+
dev_info(&GET_DEV(accel_dev), "Resetting device qat_dev%d\n",
accel_dev->accel_id);
diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index a07addd..8dd0af1 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -159,7 +159,7 @@
static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
{
if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
- *attached = new ? true : false;
+ *attached = ((new >> idx) & 0x1) ? true : false;
return true;
}
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index d8de6a8..665efca 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -139,6 +139,14 @@
bool
depends on ARM || ARM64
+config QCOM_SCM_32
+ def_bool y
+ depends on QCOM_SCM && ARM
+
+config QCOM_SCM_64
+ def_bool y
+ depends on QCOM_SCM && ARM64
+
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 000830f..2ee8347 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -13,7 +13,8 @@
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
-obj-$(CONFIG_QCOM_SCM) += qcom_scm-32.o
+obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o
+obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o
CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-y += broadcom/
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
new file mode 100644
index 0000000..bb6555f
--- /dev/null
+++ b/drivers/firmware/qcom_scm-64.c
@@ -0,0 +1,63 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/qcom_scm.h>
+
+/**
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
+ */
+int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+{
+ return -ENOTSUPP;
+}
+
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int __qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+{
+ return -ENOTSUPP;
+}
+
+/**
+ * qcom_scm_cpu_power_down() - Power down the cpu
+ * @flags - Flags to flush cache
+ *
+ * This is an end point to power down cpu. If there was a pending interrupt,
+ * the control would return from this function, otherwise, the cpu jumps to the
+ * warm boot entry point set for this cpu upon reset.
+ */
+void __qcom_scm_cpu_power_down(u32 flags)
+{
+}
+
+int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+{
+ return -ENOTSUPP;
+}
+
+int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ return -ENOTSUPP;
+}
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 2f9aead..652afd1 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -204,6 +204,8 @@
spin_lock_irqsave(&vmbus_connection.channel_lock, flags);
list_del(&channel->listentry);
spin_unlock_irqrestore(&vmbus_connection.channel_lock, flags);
+
+ primary_channel = channel;
} else {
primary_channel = channel->primary_channel;
spin_lock_irqsave(&primary_channel->lock, flags);
@@ -211,6 +213,14 @@
primary_channel->num_sc--;
spin_unlock_irqrestore(&primary_channel->lock, flags);
}
+
+ /*
+ * We need to free the bit for init_vp_index() to work in the case
+ * of sub-channel, when we reload drivers like hv_netvsc.
+ */
+ cpumask_clear_cpu(channel->target_cpu,
+ &primary_channel->alloced_cpus_in_node);
+
free_channel(channel);
}
@@ -458,6 +468,13 @@
continue;
}
+ /*
+ * NOTE: in the case of sub-channel, we clear the sub-channel
+ * related bit(s) in primary->alloced_cpus_in_node in
+ * hv_process_channel_removal(), so when we reload drivers
+ * like hv_netvsc in SMP guest, here we're able to re-allocate
+ * bit from primary->alloced_cpus_in_node.
+ */
if (!cpumask_test_cpu(cur_cpu,
&primary->alloced_cpus_in_node)) {
cpumask_set_cpu(cur_cpu,
diff --git a/drivers/hwmon/abx500.c b/drivers/hwmon/abx500.c
index 6cb89c0..1fd4685 100644
--- a/drivers/hwmon/abx500.c
+++ b/drivers/hwmon/abx500.c
@@ -470,6 +470,7 @@
{ .compatible = "stericsson,abx500-temp" },
{},
};
+MODULE_DEVICE_TABLE(of, abx500_temp_match);
#endif
static struct platform_driver abx500_temp_driver = {
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index a3dae6d..82de3de 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -539,6 +539,7 @@
{ .compatible = "gpio-fan", },
{},
};
+MODULE_DEVICE_TABLE(of, of_gpio_fan_match);
#endif /* CONFIG_OF_GPIO */
static int gpio_fan_probe(struct platform_device *pdev)
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 2d9a712..3e23003 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -323,6 +323,7 @@
{ .compatible = "pwm-fan", },
{},
};
+MODULE_DEVICE_TABLE(of, of_pwm_fan_match);
static struct platform_driver pwm_fan_driver = {
.probe = pwm_fan_probe,
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 3a3738f..cd4510a 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -620,7 +620,7 @@
.name = "C6-SKL",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
- .exit_latency = 75,
+ .exit_latency = 85,
.target_residency = 200,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
@@ -636,11 +636,19 @@
.name = "C8-SKL",
.desc = "MWAIT 0x40",
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
- .exit_latency = 174,
+ .exit_latency = 200,
.target_residency = 800,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze, },
{
+ .name = "C9-SKL",
+ .desc = "MWAIT 0x50",
+ .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 480,
+ .target_residency = 5000,
+ .enter = &intel_idle,
+ .enter_freeze = intel_idle_freeze, },
+ {
.name = "C10-SKL",
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 41d6911..f1ccd40 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -245,7 +245,6 @@
props->device_cap_flags |= IB_DEVICE_BAD_QKEY_CNTR;
if (MLX5_CAP_GEN(mdev, apm))
props->device_cap_flags |= IB_DEVICE_AUTO_PATH_MIG;
- props->device_cap_flags |= IB_DEVICE_LOCAL_DMA_LKEY;
if (MLX5_CAP_GEN(mdev, xrc))
props->device_cap_flags |= IB_DEVICE_XRC;
props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
@@ -795,53 +794,6 @@
return 0;
}
-static int alloc_pa_mkey(struct mlx5_ib_dev *dev, u32 *key, u32 pdn)
-{
- struct mlx5_create_mkey_mbox_in *in;
- struct mlx5_mkey_seg *seg;
- struct mlx5_core_mr mr;
- int err;
-
- in = kzalloc(sizeof(*in), GFP_KERNEL);
- if (!in)
- return -ENOMEM;
-
- seg = &in->seg;
- seg->flags = MLX5_PERM_LOCAL_READ | MLX5_ACCESS_MODE_PA;
- seg->flags_pd = cpu_to_be32(pdn | MLX5_MKEY_LEN64);
- seg->qpn_mkey7_0 = cpu_to_be32(0xffffff << 8);
- seg->start_addr = 0;
-
- err = mlx5_core_create_mkey(dev->mdev, &mr, in, sizeof(*in),
- NULL, NULL, NULL);
- if (err) {
- mlx5_ib_warn(dev, "failed to create mkey, %d\n", err);
- goto err_in;
- }
-
- kfree(in);
- *key = mr.key;
-
- return 0;
-
-err_in:
- kfree(in);
-
- return err;
-}
-
-static void free_pa_mkey(struct mlx5_ib_dev *dev, u32 key)
-{
- struct mlx5_core_mr mr;
- int err;
-
- memset(&mr, 0, sizeof(mr));
- mr.key = key;
- err = mlx5_core_destroy_mkey(dev->mdev, &mr);
- if (err)
- mlx5_ib_warn(dev, "failed to destroy mkey 0x%x\n", key);
-}
-
static struct ib_pd *mlx5_ib_alloc_pd(struct ib_device *ibdev,
struct ib_ucontext *context,
struct ib_udata *udata)
@@ -867,13 +819,6 @@
kfree(pd);
return ERR_PTR(-EFAULT);
}
- } else {
- err = alloc_pa_mkey(to_mdev(ibdev), &pd->pa_lkey, pd->pdn);
- if (err) {
- mlx5_core_dealloc_pd(to_mdev(ibdev)->mdev, pd->pdn);
- kfree(pd);
- return ERR_PTR(err);
- }
}
return &pd->ibpd;
@@ -884,9 +829,6 @@
struct mlx5_ib_dev *mdev = to_mdev(pd->device);
struct mlx5_ib_pd *mpd = to_mpd(pd);
- if (!pd->uobject)
- free_pa_mkey(mdev, mpd->pa_lkey);
-
mlx5_core_dealloc_pd(mdev->mdev, mpd->pdn);
kfree(mpd);
@@ -1245,18 +1187,10 @@
struct ib_srq_init_attr attr;
struct mlx5_ib_dev *dev;
struct ib_cq_init_attr cq_attr = {.cqe = 1};
- u32 rsvd_lkey;
int ret = 0;
dev = container_of(devr, struct mlx5_ib_dev, devr);
- ret = mlx5_core_query_special_context(dev->mdev, &rsvd_lkey);
- if (ret) {
- pr_err("Failed to query special context %d\n", ret);
- return ret;
- }
- dev->ib_dev.local_dma_lkey = rsvd_lkey;
-
devr->p0 = mlx5_ib_alloc_pd(&dev->ib_dev, NULL, NULL);
if (IS_ERR(devr->p0)) {
ret = PTR_ERR(devr->p0);
@@ -1418,6 +1352,7 @@
strlcpy(dev->ib_dev.name, "mlx5_%d", IB_DEVICE_NAME_MAX);
dev->ib_dev.owner = THIS_MODULE;
dev->ib_dev.node_type = RDMA_NODE_IB_CA;
+ dev->ib_dev.local_dma_lkey = 0 /* not supported for now */;
dev->num_ports = MLX5_CAP_GEN(mdev, num_ports);
dev->ib_dev.phys_port_cnt = dev->num_ports;
dev->ib_dev.num_comp_vectors =
diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index bb8cda7..22123b7 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -103,7 +103,6 @@
struct mlx5_ib_pd {
struct ib_pd ibpd;
u32 pdn;
- u32 pa_lkey;
};
/* Use macros here so that don't have to duplicate
@@ -213,7 +212,6 @@
int uuarn;
int create_type;
- u32 pa_lkey;
/* Store signature errors */
bool signature_en;
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index c745c6c..6f521a3 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -925,8 +925,6 @@
err = create_kernel_qp(dev, init_attr, qp, &in, &inlen);
if (err)
mlx5_ib_dbg(dev, "err %d\n", err);
- else
- qp->pa_lkey = to_mpd(pd)->pa_lkey;
}
if (err)
@@ -2045,7 +2043,7 @@
mfrpl->mapped_page_list[i] = cpu_to_be64(page_list[i] | perm);
dseg->addr = cpu_to_be64(mfrpl->map);
dseg->byte_count = cpu_to_be32(ALIGN(sizeof(u64) * wr->wr.fast_reg.page_list_len, 64));
- dseg->lkey = cpu_to_be32(pd->pa_lkey);
+ dseg->lkey = cpu_to_be32(pd->ibpd.local_dma_lkey);
}
static __be32 send_ieth(struct ib_send_wr *wr)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index ca28736..4cd5428 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -80,7 +80,7 @@
IPOIB_NUM_WC = 4,
IPOIB_MAX_PATH_REC_QUEUE = 3,
- IPOIB_MAX_MCAST_QUEUE = 3,
+ IPOIB_MAX_MCAST_QUEUE = 64,
IPOIB_FLAG_OPER_UP = 0,
IPOIB_FLAG_INITIALIZED = 1,
@@ -548,6 +548,8 @@
int ipoib_mcast_attach(struct net_device *dev, u16 mlid,
union ib_gid *mgid, int set_qkey);
+int ipoib_mcast_leave(struct net_device *dev, struct ipoib_mcast *mcast);
+struct ipoib_mcast *__ipoib_mcast_find(struct net_device *dev, void *mgid);
int ipoib_init_qp(struct net_device *dev);
int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 36536ce..f74316e 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1149,6 +1149,9 @@
unsigned long dt;
unsigned long flags;
int i;
+ LIST_HEAD(remove_list);
+ struct ipoib_mcast *mcast, *tmcast;
+ struct net_device *dev = priv->dev;
if (test_bit(IPOIB_STOP_NEIGH_GC, &priv->flags))
return;
@@ -1176,6 +1179,19 @@
lockdep_is_held(&priv->lock))) != NULL) {
/* was the neigh idle for two GC periods */
if (time_after(neigh_obsolete, neigh->alive)) {
+ u8 *mgid = neigh->daddr + 4;
+
+ /* Is this multicast ? */
+ if (*mgid == 0xff) {
+ mcast = __ipoib_mcast_find(dev, mgid);
+
+ if (mcast && test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) {
+ list_del(&mcast->list);
+ rb_erase(&mcast->rb_node, &priv->multicast_tree);
+ list_add_tail(&mcast->list, &remove_list);
+ }
+ }
+
rcu_assign_pointer(*np,
rcu_dereference_protected(neigh->hnext,
lockdep_is_held(&priv->lock)));
@@ -1191,6 +1207,8 @@
out_unlock:
spin_unlock_irqrestore(&priv->lock, flags);
+ list_for_each_entry_safe(mcast, tmcast, &remove_list, list)
+ ipoib_mcast_leave(dev, mcast);
}
static void ipoib_reap_neigh(struct work_struct *work)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 09a1748..136cbef 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -153,7 +153,7 @@
return mcast;
}
-static struct ipoib_mcast *__ipoib_mcast_find(struct net_device *dev, void *mgid)
+struct ipoib_mcast *__ipoib_mcast_find(struct net_device *dev, void *mgid)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct rb_node *n = priv->multicast_tree.rb_node;
@@ -508,17 +508,19 @@
rec.hop_limit = priv->broadcast->mcmember.hop_limit;
/*
- * Historically Linux IPoIB has never properly supported SEND
- * ONLY join. It emulated it by not providing all the required
- * attributes, which is enough to prevent group creation and
- * detect if there are full members or not. A major problem
- * with supporting SEND ONLY is detecting when the group is
- * auto-destroyed as IPoIB will cache the MLID..
+ * Send-only IB Multicast joins do not work at the core
+ * IB layer yet, so we can't use them here. However,
+ * we are emulating an Ethernet multicast send, which
+ * does not require a multicast subscription and will
+ * still send properly. The most appropriate thing to
+ * do is to create the group if it doesn't exist as that
+ * most closely emulates the behavior, from a user space
+ * application perspecitive, of Ethernet multicast
+ * operation. For now, we do a full join, maybe later
+ * when the core IB layers support send only joins we
+ * will use them.
*/
-#if 1
- if (test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags))
- comp_mask &= ~IB_SA_MCMEMBER_REC_TRAFFIC_CLASS;
-#else
+#if 0
if (test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags))
rec.join_state = 4;
#endif
@@ -675,7 +677,7 @@
return 0;
}
-static int ipoib_mcast_leave(struct net_device *dev, struct ipoib_mcast *mcast)
+int ipoib_mcast_leave(struct net_device *dev, struct ipoib_mcast *mcast)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
int ret = 0;
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 1ace5d8..f58ff96 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -97,6 +97,11 @@
module_param_named(max_sectors, iser_max_sectors, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(max_sectors, "Max number of sectors in a single scsi command (default:1024");
+bool iser_always_reg = true;
+module_param_named(always_register, iser_always_reg, bool, S_IRUGO);
+MODULE_PARM_DESC(always_register,
+ "Always register memory, even for continuous memory regions (default:true)");
+
bool iser_pi_enable = false;
module_param_named(pi_enable, iser_pi_enable, bool, S_IRUGO);
MODULE_PARM_DESC(pi_enable, "Enable T10-PI offload support (default:disabled)");
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h
index 86f6583..a5edd6e 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -611,6 +611,7 @@
extern bool iser_pi_enable;
extern int iser_pi_guard;
extern unsigned int iser_max_sectors;
+extern bool iser_always_reg;
int iser_assign_reg_ops(struct iser_device *device);
diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c
index 2493cc7..4c46d67 100644
--- a/drivers/infiniband/ulp/iser/iser_memory.c
+++ b/drivers/infiniband/ulp/iser/iser_memory.c
@@ -803,11 +803,12 @@
iser_reg_prot_sg(struct iscsi_iser_task *task,
struct iser_data_buf *mem,
struct iser_fr_desc *desc,
+ bool use_dma_key,
struct iser_mem_reg *reg)
{
struct iser_device *device = task->iser_conn->ib_conn.device;
- if (mem->dma_nents == 1)
+ if (use_dma_key)
return iser_reg_dma(device, mem, reg);
return device->reg_ops->reg_mem(task, mem, &desc->pi_ctx->rsc, reg);
@@ -817,11 +818,12 @@
iser_reg_data_sg(struct iscsi_iser_task *task,
struct iser_data_buf *mem,
struct iser_fr_desc *desc,
+ bool use_dma_key,
struct iser_mem_reg *reg)
{
struct iser_device *device = task->iser_conn->ib_conn.device;
- if (mem->dma_nents == 1)
+ if (use_dma_key)
return iser_reg_dma(device, mem, reg);
return device->reg_ops->reg_mem(task, mem, &desc->rsc, reg);
@@ -836,14 +838,17 @@
struct iser_mem_reg *reg = &task->rdma_reg[dir];
struct iser_mem_reg *data_reg;
struct iser_fr_desc *desc = NULL;
+ bool use_dma_key;
int err;
err = iser_handle_unaligned_buf(task, mem, dir);
if (unlikely(err))
return err;
- if (mem->dma_nents != 1 ||
- scsi_get_prot_op(task->sc) != SCSI_PROT_NORMAL) {
+ use_dma_key = (mem->dma_nents == 1 && !iser_always_reg &&
+ scsi_get_prot_op(task->sc) == SCSI_PROT_NORMAL);
+
+ if (!use_dma_key) {
desc = device->reg_ops->reg_desc_get(ib_conn);
reg->mem_h = desc;
}
@@ -853,7 +858,7 @@
else
data_reg = &task->desc.data_reg;
- err = iser_reg_data_sg(task, mem, desc, data_reg);
+ err = iser_reg_data_sg(task, mem, desc, use_dma_key, data_reg);
if (unlikely(err))
goto err_reg;
@@ -866,7 +871,8 @@
if (unlikely(err))
goto err_reg;
- err = iser_reg_prot_sg(task, mem, desc, prot_reg);
+ err = iser_reg_prot_sg(task, mem, desc,
+ use_dma_key, prot_reg);
if (unlikely(err))
goto err_reg;
}
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index ae70cc1..85132d8 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -133,11 +133,15 @@
(unsigned long)comp);
}
- device->mr = ib_get_dma_mr(device->pd, IB_ACCESS_LOCAL_WRITE |
- IB_ACCESS_REMOTE_WRITE |
- IB_ACCESS_REMOTE_READ);
- if (IS_ERR(device->mr))
- goto dma_mr_err;
+ if (!iser_always_reg) {
+ int access = IB_ACCESS_LOCAL_WRITE |
+ IB_ACCESS_REMOTE_WRITE |
+ IB_ACCESS_REMOTE_READ;
+
+ device->mr = ib_get_dma_mr(device->pd, access);
+ if (IS_ERR(device->mr))
+ goto dma_mr_err;
+ }
INIT_IB_EVENT_HANDLER(&device->event_handler, device->ib_device,
iser_event_handler);
@@ -147,7 +151,8 @@
return 0;
handler_err:
- ib_dereg_mr(device->mr);
+ if (device->mr)
+ ib_dereg_mr(device->mr);
dma_mr_err:
for (i = 0; i < device->comps_used; i++)
tasklet_kill(&device->comps[i].tasklet);
@@ -173,7 +178,6 @@
static void iser_free_device_ib_res(struct iser_device *device)
{
int i;
- BUG_ON(device->mr == NULL);
for (i = 0; i < device->comps_used; i++) {
struct iser_comp *comp = &device->comps[i];
@@ -184,7 +188,8 @@
}
(void)ib_unregister_event_handler(&device->event_handler);
- (void)ib_dereg_mr(device->mr);
+ if (device->mr)
+ (void)ib_dereg_mr(device->mr);
ib_dealloc_pd(device->pd);
kfree(device->comps);
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 403bd29..aa59037 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -238,8 +238,6 @@
rx_sg->lkey = device->pd->local_dma_lkey;
}
- isert_conn->rx_desc_head = 0;
-
return 0;
dma_map_fail:
@@ -634,7 +632,7 @@
isert_init_conn(struct isert_conn *isert_conn)
{
isert_conn->state = ISER_CONN_INIT;
- INIT_LIST_HEAD(&isert_conn->accept_node);
+ INIT_LIST_HEAD(&isert_conn->node);
init_completion(&isert_conn->login_comp);
init_completion(&isert_conn->login_req_comp);
init_completion(&isert_conn->wait);
@@ -762,28 +760,15 @@
ret = isert_rdma_post_recvl(isert_conn);
if (ret)
goto out_conn_dev;
- /*
- * Obtain the second reference now before isert_rdma_accept() to
- * ensure that any initiator generated REJECT CM event that occurs
- * asynchronously won't drop the last reference until the error path
- * in iscsi_target_login_sess_out() does it's ->iscsit_free_conn() ->
- * isert_free_conn() -> isert_put_conn() -> kref_put().
- */
- if (!kref_get_unless_zero(&isert_conn->kref)) {
- isert_warn("conn %p connect_release is running\n", isert_conn);
- goto out_conn_dev;
- }
ret = isert_rdma_accept(isert_conn);
if (ret)
goto out_conn_dev;
- mutex_lock(&isert_np->np_accept_mutex);
- list_add_tail(&isert_conn->accept_node, &isert_np->np_accept_list);
- mutex_unlock(&isert_np->np_accept_mutex);
+ mutex_lock(&isert_np->mutex);
+ list_add_tail(&isert_conn->node, &isert_np->accepted);
+ mutex_unlock(&isert_np->mutex);
- isert_info("np %p: Allow accept_np to continue\n", np);
- up(&isert_np->np_sem);
return 0;
out_conn_dev:
@@ -831,13 +816,21 @@
isert_connected_handler(struct rdma_cm_id *cma_id)
{
struct isert_conn *isert_conn = cma_id->qp->qp_context;
+ struct isert_np *isert_np = cma_id->context;
isert_info("conn %p\n", isert_conn);
mutex_lock(&isert_conn->mutex);
- if (isert_conn->state != ISER_CONN_FULL_FEATURE)
- isert_conn->state = ISER_CONN_UP;
+ isert_conn->state = ISER_CONN_UP;
+ kref_get(&isert_conn->kref);
mutex_unlock(&isert_conn->mutex);
+
+ mutex_lock(&isert_np->mutex);
+ list_move_tail(&isert_conn->node, &isert_np->pending);
+ mutex_unlock(&isert_np->mutex);
+
+ isert_info("np %p: Allow accept_np to continue\n", isert_np);
+ up(&isert_np->sem);
}
static void
@@ -903,14 +896,14 @@
switch (event) {
case RDMA_CM_EVENT_DEVICE_REMOVAL:
- isert_np->np_cm_id = NULL;
+ isert_np->cm_id = NULL;
break;
case RDMA_CM_EVENT_ADDR_CHANGE:
- isert_np->np_cm_id = isert_setup_id(isert_np);
- if (IS_ERR(isert_np->np_cm_id)) {
+ isert_np->cm_id = isert_setup_id(isert_np);
+ if (IS_ERR(isert_np->cm_id)) {
isert_err("isert np %p setup id failed: %ld\n",
- isert_np, PTR_ERR(isert_np->np_cm_id));
- isert_np->np_cm_id = NULL;
+ isert_np, PTR_ERR(isert_np->cm_id));
+ isert_np->cm_id = NULL;
}
break;
default:
@@ -929,7 +922,7 @@
struct isert_conn *isert_conn;
bool terminating = false;
- if (isert_np->np_cm_id == cma_id)
+ if (isert_np->cm_id == cma_id)
return isert_np_cma_handler(cma_id->context, event);
isert_conn = cma_id->qp->qp_context;
@@ -945,13 +938,13 @@
if (terminating)
goto out;
- mutex_lock(&isert_np->np_accept_mutex);
- if (!list_empty(&isert_conn->accept_node)) {
- list_del_init(&isert_conn->accept_node);
+ mutex_lock(&isert_np->mutex);
+ if (!list_empty(&isert_conn->node)) {
+ list_del_init(&isert_conn->node);
isert_put_conn(isert_conn);
queue_work(isert_release_wq, &isert_conn->release_work);
}
- mutex_unlock(&isert_np->np_accept_mutex);
+ mutex_unlock(&isert_np->mutex);
out:
return 0;
@@ -962,6 +955,7 @@
{
struct isert_conn *isert_conn = cma_id->qp->qp_context;
+ list_del_init(&isert_conn->node);
isert_conn->cm_id = NULL;
isert_put_conn(isert_conn);
@@ -1006,35 +1000,51 @@
}
static int
-isert_post_recv(struct isert_conn *isert_conn, u32 count)
+isert_post_recvm(struct isert_conn *isert_conn, u32 count)
{
struct ib_recv_wr *rx_wr, *rx_wr_failed;
int i, ret;
- unsigned int rx_head = isert_conn->rx_desc_head;
struct iser_rx_desc *rx_desc;
for (rx_wr = isert_conn->rx_wr, i = 0; i < count; i++, rx_wr++) {
- rx_desc = &isert_conn->rx_descs[rx_head];
- rx_wr->wr_id = (uintptr_t)rx_desc;
- rx_wr->sg_list = &rx_desc->rx_sg;
- rx_wr->num_sge = 1;
- rx_wr->next = rx_wr + 1;
- rx_head = (rx_head + 1) & (ISERT_QP_MAX_RECV_DTOS - 1);
+ rx_desc = &isert_conn->rx_descs[i];
+ rx_wr->wr_id = (uintptr_t)rx_desc;
+ rx_wr->sg_list = &rx_desc->rx_sg;
+ rx_wr->num_sge = 1;
+ rx_wr->next = rx_wr + 1;
}
-
rx_wr--;
rx_wr->next = NULL; /* mark end of work requests list */
isert_conn->post_recv_buf_count += count;
ret = ib_post_recv(isert_conn->qp, isert_conn->rx_wr,
- &rx_wr_failed);
+ &rx_wr_failed);
if (ret) {
isert_err("ib_post_recv() failed with ret: %d\n", ret);
isert_conn->post_recv_buf_count -= count;
- } else {
- isert_dbg("Posted %d RX buffers\n", count);
- isert_conn->rx_desc_head = rx_head;
}
+
+ return ret;
+}
+
+static int
+isert_post_recv(struct isert_conn *isert_conn, struct iser_rx_desc *rx_desc)
+{
+ struct ib_recv_wr *rx_wr_failed, rx_wr;
+ int ret;
+
+ rx_wr.wr_id = (uintptr_t)rx_desc;
+ rx_wr.sg_list = &rx_desc->rx_sg;
+ rx_wr.num_sge = 1;
+ rx_wr.next = NULL;
+
+ isert_conn->post_recv_buf_count++;
+ ret = ib_post_recv(isert_conn->qp, &rx_wr, &rx_wr_failed);
+ if (ret) {
+ isert_err("ib_post_recv() failed with ret: %d\n", ret);
+ isert_conn->post_recv_buf_count--;
+ }
+
return ret;
}
@@ -1205,7 +1215,8 @@
if (ret)
return ret;
- ret = isert_post_recv(isert_conn, ISERT_MIN_POSTED_RX);
+ ret = isert_post_recvm(isert_conn,
+ ISERT_QP_MAX_RECV_DTOS);
if (ret)
return ret;
@@ -1278,7 +1289,7 @@
}
static struct iscsi_cmd
-*isert_allocate_cmd(struct iscsi_conn *conn)
+*isert_allocate_cmd(struct iscsi_conn *conn, struct iser_rx_desc *rx_desc)
{
struct isert_conn *isert_conn = conn->context;
struct isert_cmd *isert_cmd;
@@ -1292,6 +1303,7 @@
isert_cmd = iscsit_priv_cmd(cmd);
isert_cmd->conn = isert_conn;
isert_cmd->iscsi_cmd = cmd;
+ isert_cmd->rx_desc = rx_desc;
return cmd;
}
@@ -1303,9 +1315,9 @@
{
struct iscsi_conn *conn = isert_conn->conn;
struct iscsi_scsi_req *hdr = (struct iscsi_scsi_req *)buf;
- struct scatterlist *sg;
int imm_data, imm_data_len, unsol_data, sg_nents, rc;
bool dump_payload = false;
+ unsigned int data_len;
rc = iscsit_setup_scsi_cmd(conn, cmd, buf);
if (rc < 0)
@@ -1314,7 +1326,10 @@
imm_data = cmd->immediate_data;
imm_data_len = cmd->first_burst_len;
unsol_data = cmd->unsolicited_data;
+ data_len = cmd->se_cmd.data_length;
+ if (imm_data && imm_data_len == data_len)
+ cmd->se_cmd.se_cmd_flags |= SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC;
rc = iscsit_process_scsi_cmd(conn, cmd, hdr);
if (rc < 0) {
return 0;
@@ -1326,13 +1341,20 @@
if (!imm_data)
return 0;
- sg = &cmd->se_cmd.t_data_sg[0];
- sg_nents = max(1UL, DIV_ROUND_UP(imm_data_len, PAGE_SIZE));
-
- isert_dbg("Copying Immediate SG: %p sg_nents: %u from %p imm_data_len: %d\n",
- sg, sg_nents, &rx_desc->data[0], imm_data_len);
-
- sg_copy_from_buffer(sg, sg_nents, &rx_desc->data[0], imm_data_len);
+ if (imm_data_len != data_len) {
+ sg_nents = max(1UL, DIV_ROUND_UP(imm_data_len, PAGE_SIZE));
+ sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents,
+ &rx_desc->data[0], imm_data_len);
+ isert_dbg("Copy Immediate sg_nents: %u imm_data_len: %d\n",
+ sg_nents, imm_data_len);
+ } else {
+ sg_init_table(&isert_cmd->sg, 1);
+ cmd->se_cmd.t_data_sg = &isert_cmd->sg;
+ cmd->se_cmd.t_data_nents = 1;
+ sg_set_buf(&isert_cmd->sg, &rx_desc->data[0], imm_data_len);
+ isert_dbg("Transfer Immediate imm_data_len: %d\n",
+ imm_data_len);
+ }
cmd->write_data_done += imm_data_len;
@@ -1407,6 +1429,15 @@
if (rc < 0)
return rc;
+ /*
+ * multiple data-outs on the same command can arrive -
+ * so post the buffer before hand
+ */
+ rc = isert_post_recv(isert_conn, rx_desc);
+ if (rc) {
+ isert_err("ib_post_recv failed with %d\n", rc);
+ return rc;
+ }
return 0;
}
@@ -1479,7 +1510,7 @@
switch (opcode) {
case ISCSI_OP_SCSI_CMD:
- cmd = isert_allocate_cmd(conn);
+ cmd = isert_allocate_cmd(conn, rx_desc);
if (!cmd)
break;
@@ -1493,7 +1524,7 @@
rx_desc, (unsigned char *)hdr);
break;
case ISCSI_OP_NOOP_OUT:
- cmd = isert_allocate_cmd(conn);
+ cmd = isert_allocate_cmd(conn, rx_desc);
if (!cmd)
break;
@@ -1506,7 +1537,7 @@
(unsigned char *)hdr);
break;
case ISCSI_OP_SCSI_TMFUNC:
- cmd = isert_allocate_cmd(conn);
+ cmd = isert_allocate_cmd(conn, rx_desc);
if (!cmd)
break;
@@ -1514,22 +1545,20 @@
(unsigned char *)hdr);
break;
case ISCSI_OP_LOGOUT:
- cmd = isert_allocate_cmd(conn);
+ cmd = isert_allocate_cmd(conn, rx_desc);
if (!cmd)
break;
ret = iscsit_handle_logout_cmd(conn, cmd, (unsigned char *)hdr);
break;
case ISCSI_OP_TEXT:
- if (be32_to_cpu(hdr->ttt) != 0xFFFFFFFF) {
+ if (be32_to_cpu(hdr->ttt) != 0xFFFFFFFF)
cmd = iscsit_find_cmd_from_itt(conn, hdr->itt);
- if (!cmd)
- break;
- } else {
- cmd = isert_allocate_cmd(conn);
- if (!cmd)
- break;
- }
+ else
+ cmd = isert_allocate_cmd(conn, rx_desc);
+
+ if (!cmd)
+ break;
isert_cmd = iscsit_priv_cmd(cmd);
ret = isert_handle_text_cmd(isert_conn, isert_cmd, cmd,
@@ -1589,7 +1618,7 @@
struct ib_device *ib_dev = isert_conn->cm_id->device;
struct iscsi_hdr *hdr;
u64 rx_dma;
- int rx_buflen, outstanding;
+ int rx_buflen;
if ((char *)desc == isert_conn->login_req_buf) {
rx_dma = isert_conn->login_req_dma;
@@ -1629,22 +1658,6 @@
DMA_FROM_DEVICE);
isert_conn->post_recv_buf_count--;
- isert_dbg("Decremented post_recv_buf_count: %d\n",
- isert_conn->post_recv_buf_count);
-
- if ((char *)desc == isert_conn->login_req_buf)
- return;
-
- outstanding = isert_conn->post_recv_buf_count;
- if (outstanding + ISERT_MIN_POSTED_RX <= ISERT_QP_MAX_RECV_DTOS) {
- int err, count = min(ISERT_QP_MAX_RECV_DTOS - outstanding,
- ISERT_MIN_POSTED_RX);
- err = isert_post_recv(isert_conn, count);
- if (err) {
- isert_err("isert_post_recv() count: %d failed, %d\n",
- count, err);
- }
- }
}
static int
@@ -2156,6 +2169,12 @@
struct ib_send_wr *wr_failed;
int ret;
+ ret = isert_post_recv(isert_conn, isert_cmd->rx_desc);
+ if (ret) {
+ isert_err("ib_post_recv failed with %d\n", ret);
+ return ret;
+ }
+
ret = ib_post_send(isert_conn->qp, &isert_cmd->tx_desc.send_wr,
&wr_failed);
if (ret) {
@@ -2950,6 +2969,12 @@
&isert_cmd->tx_desc.send_wr);
isert_cmd->rdma_wr.s_send_wr.next = &isert_cmd->tx_desc.send_wr;
wr->send_wr_num += 1;
+
+ rc = isert_post_recv(isert_conn, isert_cmd->rx_desc);
+ if (rc) {
+ isert_err("ib_post_recv failed with %d\n", rc);
+ return rc;
+ }
}
rc = ib_post_send(isert_conn->qp, wr->send_wr, &wr_failed);
@@ -2999,9 +3024,16 @@
static int
isert_immediate_queue(struct iscsi_conn *conn, struct iscsi_cmd *cmd, int state)
{
- int ret;
+ struct isert_cmd *isert_cmd = iscsit_priv_cmd(cmd);
+ int ret = 0;
switch (state) {
+ case ISTATE_REMOVE:
+ spin_lock_bh(&conn->cmd_lock);
+ list_del_init(&cmd->i_conn_node);
+ spin_unlock_bh(&conn->cmd_lock);
+ isert_put_cmd(isert_cmd, true);
+ break;
case ISTATE_SEND_NOPIN_WANT_RESPONSE:
ret = isert_put_nopin(cmd, conn, false);
break;
@@ -3106,10 +3138,10 @@
isert_err("Unable to allocate struct isert_np\n");
return -ENOMEM;
}
- sema_init(&isert_np->np_sem, 0);
- mutex_init(&isert_np->np_accept_mutex);
- INIT_LIST_HEAD(&isert_np->np_accept_list);
- init_completion(&isert_np->np_login_comp);
+ sema_init(&isert_np->sem, 0);
+ mutex_init(&isert_np->mutex);
+ INIT_LIST_HEAD(&isert_np->accepted);
+ INIT_LIST_HEAD(&isert_np->pending);
isert_np->np = np;
/*
@@ -3125,7 +3157,7 @@
goto out;
}
- isert_np->np_cm_id = isert_lid;
+ isert_np->cm_id = isert_lid;
np->np_context = isert_np;
return 0;
@@ -3214,7 +3246,7 @@
int ret;
accept_wait:
- ret = down_interruptible(&isert_np->np_sem);
+ ret = down_interruptible(&isert_np->sem);
if (ret)
return -ENODEV;
@@ -3231,15 +3263,15 @@
}
spin_unlock_bh(&np->np_thread_lock);
- mutex_lock(&isert_np->np_accept_mutex);
- if (list_empty(&isert_np->np_accept_list)) {
- mutex_unlock(&isert_np->np_accept_mutex);
+ mutex_lock(&isert_np->mutex);
+ if (list_empty(&isert_np->pending)) {
+ mutex_unlock(&isert_np->mutex);
goto accept_wait;
}
- isert_conn = list_first_entry(&isert_np->np_accept_list,
- struct isert_conn, accept_node);
- list_del_init(&isert_conn->accept_node);
- mutex_unlock(&isert_np->np_accept_mutex);
+ isert_conn = list_first_entry(&isert_np->pending,
+ struct isert_conn, node);
+ list_del_init(&isert_conn->node);
+ mutex_unlock(&isert_np->mutex);
conn->context = isert_conn;
isert_conn->conn = conn;
@@ -3257,28 +3289,39 @@
struct isert_np *isert_np = np->np_context;
struct isert_conn *isert_conn, *n;
- if (isert_np->np_cm_id)
- rdma_destroy_id(isert_np->np_cm_id);
+ if (isert_np->cm_id)
+ rdma_destroy_id(isert_np->cm_id);
/*
* FIXME: At this point we don't have a good way to insure
* that at this point we don't have hanging connections that
* completed RDMA establishment but didn't start iscsi login
* process. So work-around this by cleaning up what ever piled
- * up in np_accept_list.
+ * up in accepted and pending lists.
*/
- mutex_lock(&isert_np->np_accept_mutex);
- if (!list_empty(&isert_np->np_accept_list)) {
- isert_info("Still have isert connections, cleaning up...\n");
+ mutex_lock(&isert_np->mutex);
+ if (!list_empty(&isert_np->pending)) {
+ isert_info("Still have isert pending connections\n");
list_for_each_entry_safe(isert_conn, n,
- &isert_np->np_accept_list,
- accept_node) {
+ &isert_np->pending,
+ node) {
isert_info("cleaning isert_conn %p state (%d)\n",
isert_conn, isert_conn->state);
isert_connect_release(isert_conn);
}
}
- mutex_unlock(&isert_np->np_accept_mutex);
+
+ if (!list_empty(&isert_np->accepted)) {
+ isert_info("Still have isert accepted connections\n");
+ list_for_each_entry_safe(isert_conn, n,
+ &isert_np->accepted,
+ node) {
+ isert_info("cleaning isert_conn %p state (%d)\n",
+ isert_conn, isert_conn->state);
+ isert_connect_release(isert_conn);
+ }
+ }
+ mutex_unlock(&isert_np->mutex);
np->np_context = NULL;
kfree(isert_np);
@@ -3345,6 +3388,41 @@
wait_for_completion(&isert_conn->wait_comp_err);
}
+/**
+ * isert_put_unsol_pending_cmds() - Drop commands waiting for
+ * unsolicitate dataout
+ * @conn: iscsi connection
+ *
+ * We might still have commands that are waiting for unsolicited
+ * dataouts messages. We must put the extra reference on those
+ * before blocking on the target_wait_for_session_cmds
+ */
+static void
+isert_put_unsol_pending_cmds(struct iscsi_conn *conn)
+{
+ struct iscsi_cmd *cmd, *tmp;
+ static LIST_HEAD(drop_cmd_list);
+
+ spin_lock_bh(&conn->cmd_lock);
+ list_for_each_entry_safe(cmd, tmp, &conn->conn_cmd_list, i_conn_node) {
+ if ((cmd->cmd_flags & ICF_NON_IMMEDIATE_UNSOLICITED_DATA) &&
+ (cmd->write_data_done < conn->sess->sess_ops->FirstBurstLength) &&
+ (cmd->write_data_done < cmd->se_cmd.data_length))
+ list_move_tail(&cmd->i_conn_node, &drop_cmd_list);
+ }
+ spin_unlock_bh(&conn->cmd_lock);
+
+ list_for_each_entry_safe(cmd, tmp, &drop_cmd_list, i_conn_node) {
+ list_del_init(&cmd->i_conn_node);
+ if (cmd->i_state != ISTATE_REMOVE) {
+ struct isert_cmd *isert_cmd = iscsit_priv_cmd(cmd);
+
+ isert_info("conn %p dropping cmd %p\n", conn, cmd);
+ isert_put_cmd(isert_cmd, true);
+ }
+ }
+}
+
static void isert_wait_conn(struct iscsi_conn *conn)
{
struct isert_conn *isert_conn = conn->context;
@@ -3363,8 +3441,9 @@
isert_conn_terminate(isert_conn);
mutex_unlock(&isert_conn->mutex);
- isert_wait4cmds(conn);
isert_wait4flush(isert_conn);
+ isert_put_unsol_pending_cmds(conn);
+ isert_wait4cmds(conn);
isert_wait4logout(isert_conn);
queue_work(isert_release_wq, &isert_conn->release_work);
diff --git a/drivers/infiniband/ulp/isert/ib_isert.h b/drivers/infiniband/ulp/isert/ib_isert.h
index 6a04ba3..c5b99bc 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.h
+++ b/drivers/infiniband/ulp/isert/ib_isert.h
@@ -113,7 +113,6 @@
};
struct isert_rdma_wr {
- struct list_head wr_list;
struct isert_cmd *isert_cmd;
enum iser_ib_op_code iser_ib_op;
struct ib_sge *ib_sge;
@@ -134,14 +133,13 @@
uint64_t write_va;
u64 pdu_buf_dma;
u32 pdu_buf_len;
- u32 read_va_off;
- u32 write_va_off;
- u32 rdma_wr_num;
struct isert_conn *conn;
struct iscsi_cmd *iscsi_cmd;
struct iser_tx_desc tx_desc;
+ struct iser_rx_desc *rx_desc;
struct isert_rdma_wr rdma_wr;
struct work_struct comp_work;
+ struct scatterlist sg;
};
struct isert_device;
@@ -159,11 +157,10 @@
u64 login_req_dma;
int login_req_len;
u64 login_rsp_dma;
- unsigned int rx_desc_head;
struct iser_rx_desc *rx_descs;
- struct ib_recv_wr rx_wr[ISERT_MIN_POSTED_RX];
+ struct ib_recv_wr rx_wr[ISERT_QP_MAX_RECV_DTOS];
struct iscsi_conn *conn;
- struct list_head accept_node;
+ struct list_head node;
struct completion login_comp;
struct completion login_req_comp;
struct iser_tx_desc login_tx_desc;
@@ -222,9 +219,9 @@
struct isert_np {
struct iscsi_np *np;
- struct semaphore np_sem;
- struct rdma_cm_id *np_cm_id;
- struct mutex np_accept_mutex;
- struct list_head np_accept_list;
- struct completion np_login_comp;
+ struct semaphore sem;
+ struct rdma_cm_id *cm_id;
+ struct mutex mutex;
+ struct list_head accepted;
+ struct list_head pending;
};
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 56eb471..4215b53 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -196,6 +196,7 @@
config JOYSTICK_ZHENHUA
tristate "5-byte Zhenhua RC transmitter"
select SERIO
+ select BITREVERSE
help
Say Y here if you have a Zhen Hua PPM-4CH transmitter which is
supplied with a ready to fly micro electric indoor helicopters
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 4664c2a..d9da766 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -43,7 +43,7 @@
endmenu
config IOMMU_IOVA
- bool
+ tristate
config OF_IOMMU
def_bool y
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 2d7349a..041bc18 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -3215,6 +3215,8 @@
/* Restrict dma_mask to the width that the iommu can handle */
dma_mask = min_t(uint64_t, DOMAIN_MAX_ADDR(domain->gaw), dma_mask);
+ /* Ensure we reserve the whole size-aligned region */
+ nrpages = __roundup_pow_of_two(nrpages);
if (!dmar_forcedac && dma_mask > DMA_BIT_MASK(32)) {
/*
@@ -3711,7 +3713,7 @@
static int __init iommu_init_mempool(void)
{
int ret;
- ret = iommu_iova_cache_init();
+ ret = iova_cache_get();
if (ret)
return ret;
@@ -3725,7 +3727,7 @@
kmem_cache_destroy(iommu_domain_cache);
domain_error:
- iommu_iova_cache_destroy();
+ iova_cache_put();
return -ENOMEM;
}
@@ -3734,7 +3736,7 @@
{
kmem_cache_destroy(iommu_devinfo_cache);
kmem_cache_destroy(iommu_domain_cache);
- iommu_iova_cache_destroy();
+ iova_cache_put();
}
static void quirk_ioat_snb_local_iommu(struct pci_dev *pdev)
diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
index b7c3d92..fa0adef 100644
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -18,42 +18,9 @@
*/
#include <linux/iova.h>
+#include <linux/module.h>
#include <linux/slab.h>
-static struct kmem_cache *iommu_iova_cache;
-
-int iommu_iova_cache_init(void)
-{
- int ret = 0;
-
- iommu_iova_cache = kmem_cache_create("iommu_iova",
- sizeof(struct iova),
- 0,
- SLAB_HWCACHE_ALIGN,
- NULL);
- if (!iommu_iova_cache) {
- pr_err("Couldn't create iova cache\n");
- ret = -ENOMEM;
- }
-
- return ret;
-}
-
-void iommu_iova_cache_destroy(void)
-{
- kmem_cache_destroy(iommu_iova_cache);
-}
-
-struct iova *alloc_iova_mem(void)
-{
- return kmem_cache_alloc(iommu_iova_cache, GFP_ATOMIC);
-}
-
-void free_iova_mem(struct iova *iova)
-{
- kmem_cache_free(iommu_iova_cache, iova);
-}
-
void
init_iova_domain(struct iova_domain *iovad, unsigned long granule,
unsigned long start_pfn, unsigned long pfn_32bit)
@@ -72,6 +39,7 @@
iovad->start_pfn = start_pfn;
iovad->dma_32bit_pfn = pfn_32bit;
}
+EXPORT_SYMBOL_GPL(init_iova_domain);
static struct rb_node *
__get_cached_rbnode(struct iova_domain *iovad, unsigned long *limit_pfn)
@@ -120,19 +88,14 @@
}
}
-/* Computes the padding size required, to make the
- * the start address naturally aligned on its size
+/*
+ * Computes the padding size required, to make the start address
+ * naturally aligned on the power-of-two order of its size
*/
-static int
-iova_get_pad_size(int size, unsigned int limit_pfn)
+static unsigned int
+iova_get_pad_size(unsigned int size, unsigned int limit_pfn)
{
- unsigned int pad_size = 0;
- unsigned int order = ilog2(size);
-
- if (order)
- pad_size = (limit_pfn + 1) % (1 << order);
-
- return pad_size;
+ return (limit_pfn + 1 - size) & (__roundup_pow_of_two(size) - 1);
}
static int __alloc_and_insert_iova_range(struct iova_domain *iovad,
@@ -242,6 +205,57 @@
rb_insert_color(&iova->node, root);
}
+static struct kmem_cache *iova_cache;
+static unsigned int iova_cache_users;
+static DEFINE_MUTEX(iova_cache_mutex);
+
+struct iova *alloc_iova_mem(void)
+{
+ return kmem_cache_alloc(iova_cache, GFP_ATOMIC);
+}
+EXPORT_SYMBOL(alloc_iova_mem);
+
+void free_iova_mem(struct iova *iova)
+{
+ kmem_cache_free(iova_cache, iova);
+}
+EXPORT_SYMBOL(free_iova_mem);
+
+int iova_cache_get(void)
+{
+ mutex_lock(&iova_cache_mutex);
+ if (!iova_cache_users) {
+ iova_cache = kmem_cache_create(
+ "iommu_iova", sizeof(struct iova), 0,
+ SLAB_HWCACHE_ALIGN, NULL);
+ if (!iova_cache) {
+ mutex_unlock(&iova_cache_mutex);
+ printk(KERN_ERR "Couldn't create iova cache\n");
+ return -ENOMEM;
+ }
+ }
+
+ iova_cache_users++;
+ mutex_unlock(&iova_cache_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iova_cache_get);
+
+void iova_cache_put(void)
+{
+ mutex_lock(&iova_cache_mutex);
+ if (WARN_ON(!iova_cache_users)) {
+ mutex_unlock(&iova_cache_mutex);
+ return;
+ }
+ iova_cache_users--;
+ if (!iova_cache_users)
+ kmem_cache_destroy(iova_cache);
+ mutex_unlock(&iova_cache_mutex);
+}
+EXPORT_SYMBOL_GPL(iova_cache_put);
+
/**
* alloc_iova - allocates an iova
* @iovad: - iova domain in question
@@ -265,12 +279,6 @@
if (!new_iova)
return NULL;
- /* If size aligned is set then round the size to
- * to next power of two.
- */
- if (size_aligned)
- size = __roundup_pow_of_two(size);
-
ret = __alloc_and_insert_iova_range(iovad, size, limit_pfn,
new_iova, size_aligned);
@@ -281,6 +289,7 @@
return new_iova;
}
+EXPORT_SYMBOL_GPL(alloc_iova);
/**
* find_iova - find's an iova for a given pfn
@@ -321,6 +330,7 @@
spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags);
return NULL;
}
+EXPORT_SYMBOL_GPL(find_iova);
/**
* __free_iova - frees the given iova
@@ -339,6 +349,7 @@
spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags);
free_iova_mem(iova);
}
+EXPORT_SYMBOL_GPL(__free_iova);
/**
* free_iova - finds and frees the iova for a given pfn
@@ -356,6 +367,7 @@
__free_iova(iovad, iova);
}
+EXPORT_SYMBOL_GPL(free_iova);
/**
* put_iova_domain - destroys the iova doamin
@@ -378,6 +390,7 @@
}
spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags);
}
+EXPORT_SYMBOL_GPL(put_iova_domain);
static int
__is_range_overlap(struct rb_node *node,
@@ -467,6 +480,7 @@
spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags);
return iova;
}
+EXPORT_SYMBOL_GPL(reserve_iova);
/**
* copy_reserved_iova - copies the reserved between domains
@@ -493,6 +507,7 @@
}
spin_unlock_irqrestore(&from->iova_rbtree_lock, flags);
}
+EXPORT_SYMBOL_GPL(copy_reserved_iova);
struct iova *
split_and_remove_iova(struct iova_domain *iovad, struct iova *iova,
@@ -534,3 +549,6 @@
free_iova_mem(prev);
return NULL;
}
+
+MODULE_AUTHOR("Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/irqchip/irq-atmel-aic5.c b/drivers/irqchip/irq-atmel-aic5.c
index 9da9942..f6d6804 100644
--- a/drivers/irqchip/irq-atmel-aic5.c
+++ b/drivers/irqchip/irq-atmel-aic5.c
@@ -88,28 +88,36 @@
{
struct irq_domain *domain = d->domain;
struct irq_domain_chip_generic *dgc = domain->gc;
- struct irq_chip_generic *gc = dgc->gc[0];
+ struct irq_chip_generic *bgc = dgc->gc[0];
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- /* Disable interrupt on AIC5 */
- irq_gc_lock(gc);
+ /*
+ * Disable interrupt on AIC5. We always take the lock of the
+ * first irq chip as all chips share the same registers.
+ */
+ irq_gc_lock(bgc);
irq_reg_writel(gc, d->hwirq, AT91_AIC5_SSR);
irq_reg_writel(gc, 1, AT91_AIC5_IDCR);
gc->mask_cache &= ~d->mask;
- irq_gc_unlock(gc);
+ irq_gc_unlock(bgc);
}
static void aic5_unmask(struct irq_data *d)
{
struct irq_domain *domain = d->domain;
struct irq_domain_chip_generic *dgc = domain->gc;
- struct irq_chip_generic *gc = dgc->gc[0];
+ struct irq_chip_generic *bgc = dgc->gc[0];
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
- /* Enable interrupt on AIC5 */
- irq_gc_lock(gc);
+ /*
+ * Enable interrupt on AIC5. We always take the lock of the
+ * first irq chip as all chips share the same registers.
+ */
+ irq_gc_lock(bgc);
irq_reg_writel(gc, d->hwirq, AT91_AIC5_SSR);
irq_reg_writel(gc, 1, AT91_AIC5_IECR);
gc->mask_cache |= d->mask;
- irq_gc_unlock(gc);
+ irq_gc_unlock(bgc);
}
static int aic5_retrigger(struct irq_data *d)
diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c
index af2f16b..aeaa061 100644
--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -320,6 +320,14 @@
intrmask[i] = gic_read(intrmask_reg);
pending_reg += gic_reg_step;
intrmask_reg += gic_reg_step;
+
+ if (!config_enabled(CONFIG_64BIT) || mips_cm_is64)
+ continue;
+
+ pending[i] |= (u64)gic_read(pending_reg) << 32;
+ intrmask[i] |= (u64)gic_read(intrmask_reg) << 32;
+ pending_reg += gic_reg_step;
+ intrmask_reg += gic_reg_step;
}
bitmap_and(pending, pending, intrmask, gic_shared_intrs);
@@ -426,7 +434,7 @@
spin_lock_irqsave(&gic_lock, flags);
/* Re-route this IRQ */
- gic_map_to_vpe(irq, cpumask_first(&tmp));
+ gic_map_to_vpe(irq, mips_cm_vp_id(cpumask_first(&tmp)));
/* Update the pcpu_masks */
for (i = 0; i < NR_CPUS; i++)
@@ -599,7 +607,7 @@
GIC_SHARED_TO_HWIRQ(intr));
int i;
- gic_map_to_vpe(intr, cpu);
+ gic_map_to_vpe(intr, mips_cm_vp_id(cpu));
for (i = 0; i < NR_CPUS; i++)
clear_bit(intr, pcpu_masks[i].pcpu_mask);
set_bit(intr, pcpu_masks[cpu].pcpu_mask);
diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c
index 4b469cf..8504dbe 100644
--- a/drivers/misc/mei/debugfs.c
+++ b/drivers/misc/mei/debugfs.c
@@ -204,6 +204,8 @@
if (!dir)
return -ENOMEM;
+ dev->dbgfs_dir = dir;
+
f = debugfs_create_file("meclients", S_IRUSR, dir,
dev, &mei_dbgfs_fops_meclients);
if (!f) {
@@ -228,7 +230,6 @@
dev_err(dev->dev, "allow_fixed_address: registration failed\n");
goto err;
}
- dev->dbgfs_dir = dir;
return 0;
err:
mei_dbgfs_deregister(dev);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 0520064..a3eb20b 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -134,9 +134,11 @@
int err = cmd->error;
/* Flag re-tuning needed on CRC errors */
- if (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
+ if ((cmd->opcode != MMC_SEND_TUNING_BLOCK &&
+ cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+ (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
(mrq->data && mrq->data->error == -EILSEQ) ||
- (mrq->stop && mrq->stop->error == -EILSEQ))
+ (mrq->stop && mrq->stop->error == -EILSEQ)))
mmc_retune_needed(host);
if (err && cmd->retries && mmc_host_is_spi(host)) {
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index abd933b..5466f25 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -457,7 +457,7 @@
0, &cd_gpio_invert);
if (!ret)
dev_info(host->parent, "Got CD GPIO\n");
- else if (ret != -ENOENT)
+ else if (ret != -ENOENT && ret != -ENOSYS)
return ret;
/*
@@ -481,7 +481,7 @@
ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
if (!ret)
dev_info(host->parent, "Got WP GPIO\n");
- else if (ret != -ENOENT)
+ else if (ret != -ENOENT && ret != -ENOSYS)
return ret;
if (of_property_read_bool(np, "disable-wp"))
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 1420f29..8cadd74 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -28,6 +28,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/io.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio.h>
@@ -454,12 +455,8 @@
{
struct pxamci_host *host = mmc_priv(mmc);
- if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
- if (host->pdata->gpio_card_ro_invert)
- return !gpio_get_value(host->pdata->gpio_card_ro);
- else
- return gpio_get_value(host->pdata->gpio_card_ro);
- }
+ if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro))
+ return mmc_gpio_get_ro(mmc);
if (host->pdata && host->pdata->get_ro)
return !!host->pdata->get_ro(mmc_dev(mmc));
/*
@@ -551,6 +548,7 @@
static const struct mmc_host_ops pxamci_ops = {
.request = pxamci_request,
+ .get_cd = mmc_gpio_get_cd,
.get_ro = pxamci_get_ro,
.set_ios = pxamci_set_ios,
.enable_sdio_irq = pxamci_enable_sdio_irq,
@@ -790,37 +788,31 @@
gpio_power = host->pdata->gpio_power;
}
if (gpio_is_valid(gpio_power)) {
- ret = gpio_request(gpio_power, "mmc card power");
+ ret = devm_gpio_request(&pdev->dev, gpio_power,
+ "mmc card power");
if (ret) {
- dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
+ dev_err(&pdev->dev, "Failed requesting gpio_power %d\n",
+ gpio_power);
goto out;
}
gpio_direction_output(gpio_power,
host->pdata->gpio_power_invert);
}
- if (gpio_is_valid(gpio_ro)) {
- ret = gpio_request(gpio_ro, "mmc card read only");
- if (ret) {
- dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
- goto err_gpio_ro;
- }
- gpio_direction_input(gpio_ro);
+ if (gpio_is_valid(gpio_ro))
+ ret = mmc_gpio_request_ro(mmc, gpio_ro);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
+ goto out;
+ } else {
+ mmc->caps |= host->pdata->gpio_card_ro_invert ?
+ MMC_CAP2_RO_ACTIVE_HIGH : 0;
}
- if (gpio_is_valid(gpio_cd)) {
- ret = gpio_request(gpio_cd, "mmc card detect");
- if (ret) {
- dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
- goto err_gpio_cd;
- }
- gpio_direction_input(gpio_cd);
- ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "mmc card detect", mmc);
- if (ret) {
- dev_err(&pdev->dev, "failed to request card detect IRQ\n");
- goto err_request_irq;
- }
+ if (gpio_is_valid(gpio_cd))
+ ret = mmc_gpio_request_cd(mmc, gpio_cd, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
+ goto out;
}
if (host->pdata && host->pdata->init)
@@ -835,13 +827,7 @@
return 0;
-err_request_irq:
- gpio_free(gpio_cd);
-err_gpio_cd:
- gpio_free(gpio_ro);
-err_gpio_ro:
- gpio_free(gpio_power);
- out:
+out:
if (host) {
if (host->dma_chan_rx)
dma_release_channel(host->dma_chan_rx);
@@ -873,14 +859,6 @@
gpio_ro = host->pdata->gpio_card_ro;
gpio_power = host->pdata->gpio_power;
}
- if (gpio_is_valid(gpio_cd)) {
- free_irq(gpio_to_irq(gpio_cd), mmc);
- gpio_free(gpio_cd);
- }
- if (gpio_is_valid(gpio_ro))
- gpio_free(gpio_ro);
- if (gpio_is_valid(gpio_power))
- gpio_free(gpio_power);
if (host->vcc)
regulator_put(host->vcc);
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index a7b7a67..b981b85 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -210,6 +210,16 @@
#define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */
#define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */
+#define SDXC_CLK_400K 0
+#define SDXC_CLK_25M 1
+#define SDXC_CLK_50M 2
+#define SDXC_CLK_50M_DDR 3
+
+struct sunxi_mmc_clk_delay {
+ u32 output;
+ u32 sample;
+};
+
struct sunxi_idma_des {
u32 config;
u32 buf_size;
@@ -229,6 +239,7 @@
struct clk *clk_mmc;
struct clk *clk_sample;
struct clk *clk_output;
+ const struct sunxi_mmc_clk_delay *clk_delays;
/* irq */
spinlock_t lock;
@@ -654,25 +665,19 @@
/* determine delays */
if (rate <= 400000) {
- oclk_dly = 180;
- sclk_dly = 42;
+ oclk_dly = host->clk_delays[SDXC_CLK_400K].output;
+ sclk_dly = host->clk_delays[SDXC_CLK_400K].sample;
} else if (rate <= 25000000) {
- oclk_dly = 180;
- sclk_dly = 75;
+ oclk_dly = host->clk_delays[SDXC_CLK_25M].output;
+ sclk_dly = host->clk_delays[SDXC_CLK_25M].sample;
} else if (rate <= 50000000) {
if (ios->timing == MMC_TIMING_UHS_DDR50) {
- oclk_dly = 60;
- sclk_dly = 120;
+ oclk_dly = host->clk_delays[SDXC_CLK_50M_DDR].output;
+ sclk_dly = host->clk_delays[SDXC_CLK_50M_DDR].sample;
} else {
- oclk_dly = 90;
- sclk_dly = 150;
+ oclk_dly = host->clk_delays[SDXC_CLK_50M].output;
+ sclk_dly = host->clk_delays[SDXC_CLK_50M].sample;
}
- } else if (rate <= 100000000) {
- oclk_dly = 6;
- sclk_dly = 24;
- } else if (rate <= 200000000) {
- oclk_dly = 3;
- sclk_dly = 12;
} else {
return -EINVAL;
}
@@ -871,6 +876,7 @@
static const struct of_device_id sunxi_mmc_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-mmc", },
{ .compatible = "allwinner,sun5i-a13-mmc", },
+ { .compatible = "allwinner,sun9i-a80-mmc", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
@@ -884,6 +890,20 @@
.hw_reset = sunxi_mmc_hw_reset,
};
+static const struct sunxi_mmc_clk_delay sunxi_mmc_clk_delays[] = {
+ [SDXC_CLK_400K] = { .output = 180, .sample = 180 },
+ [SDXC_CLK_25M] = { .output = 180, .sample = 75 },
+ [SDXC_CLK_50M] = { .output = 90, .sample = 120 },
+ [SDXC_CLK_50M_DDR] = { .output = 60, .sample = 120 },
+};
+
+static const struct sunxi_mmc_clk_delay sun9i_mmc_clk_delays[] = {
+ [SDXC_CLK_400K] = { .output = 180, .sample = 180 },
+ [SDXC_CLK_25M] = { .output = 180, .sample = 75 },
+ [SDXC_CLK_50M] = { .output = 150, .sample = 120 },
+ [SDXC_CLK_50M_DDR] = { .output = 90, .sample = 120 },
+};
+
static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
struct platform_device *pdev)
{
@@ -895,6 +915,11 @@
else
host->idma_des_size_bits = 16;
+ if (of_device_is_compatible(np, "allwinner,sun9i-a80-mmc"))
+ host->clk_delays = sun9i_mmc_clk_delays;
+ else
+ host->clk_delays = sunxi_mmc_clk_delays;
+
ret = mmc_regulator_get_supply(host->mmc);
if (ret) {
if (ret != -EPROBE_DEFER)
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 5bbd1f0..1fc23e4 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -926,6 +926,11 @@
goto bad;
}
+ if (data_size > ubi->leb_size) {
+ ubi_err(ubi, "bad data_size");
+ goto bad;
+ }
+
if (vol_type == UBI_VID_STATIC) {
/*
* Although from high-level point of view static volumes may
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 80bdd5b..d85c197 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -649,6 +649,7 @@
if (ubi->corr_peb_count)
ubi_err(ubi, "%d PEBs are corrupted and not used",
ubi->corr_peb_count);
+ return -ENOSPC;
}
ubi->rsvd_pebs += reserved_pebs;
ubi->avail_pebs -= reserved_pebs;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 275d9fb..eb4489f9 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1601,6 +1601,7 @@
if (ubi->corr_peb_count)
ubi_err(ubi, "%d PEBs are corrupted and not used",
ubi->corr_peb_count);
+ err = -ENOSPC;
goto out_free;
}
ubi->avail_pebs -= reserved_pebs;
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index b384926..932fb72 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -2126,6 +2126,8 @@
reg |= PORT_CONTROL_FRAME_ETHER_TYPE_DSA;
else
reg |= PORT_CONTROL_FRAME_MODE_DSA;
+ reg |= PORT_CONTROL_FORWARD_UNKNOWN |
+ PORT_CONTROL_FORWARD_UNKNOWN_MC;
}
if (mv88e6xxx_6352_family(ds) || mv88e6xxx_6351_family(ds) ||
diff --git a/drivers/net/ethernet/brocade/bna/bfa_ioc.c b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
index b7a0f78..9e59663 100644
--- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c
+++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c
@@ -1543,7 +1543,7 @@
}
/* Flush FLI data fifo. */
-static u32
+static int
bfa_flash_fifo_flush(void __iomem *pci_bar)
{
u32 i;
@@ -1573,11 +1573,11 @@
}
/* Read flash status. */
-static u32
+static int
bfa_flash_status_read(void __iomem *pci_bar)
{
union bfa_flash_dev_status_reg dev_status;
- u32 status;
+ int status;
u32 ret_status;
int i;
@@ -1611,11 +1611,11 @@
}
/* Start flash read operation. */
-static u32
+static int
bfa_flash_read_start(void __iomem *pci_bar, u32 offset, u32 len,
char *buf)
{
- u32 status;
+ int status;
/* len must be mutiple of 4 and not exceeding fifo size */
if (len == 0 || len > BFA_FLASH_FIFO_SIZE || (len & 0x03) != 0)
@@ -1703,7 +1703,8 @@
bfa_flash_raw_read(void __iomem *pci_bar, u32 offset, char *buf,
u32 len)
{
- u32 n, status;
+ u32 n;
+ int status;
u32 off, l, s, residue, fifo_sz;
residue = len;
diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index cc2d8b4..253f8ed 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -816,7 +816,7 @@
struct net_device *ndev;
struct hip04_priv *priv;
struct resource *res;
- unsigned int irq;
+ int irq;
int ret;
ndev = alloc_etherdev(sizeof(struct hip04_priv));
diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h
index f379e47..93ae114 100644
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -460,8 +460,8 @@
u32 index;
};
-#define EMAC_ETHTOOL_REGS_VER 0
-#define EMAC4_ETHTOOL_REGS_VER 1
-#define EMAC4SYNC_ETHTOOL_REGS_VER 2
+#define EMAC_ETHTOOL_REGS_VER 3
+#define EMAC4_ETHTOOL_REGS_VER 4
+#define EMAC4SYNC_ETHTOOL_REGS_VER 5
#endif /* __IBM_NEWEMAC_CORE_H */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index 199275d..e59ffb2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -953,6 +953,13 @@
/* take the lock before we start messing with the ring */
mutex_lock(&hw->aq.arq_mutex);
+ if (hw->aq.arq.count == 0) {
+ i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
+ "AQRX: Admin queue not initialized.\n");
+ ret_code = I40E_ERR_QUEUE_EMPTY;
+ goto clean_arq_element_err;
+ }
+
/* set next_to_use to head */
ntu = (rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK);
if (ntu == ntc) {
@@ -1014,6 +1021,8 @@
/* Set pending if needed, unlock and return */
if (pending != NULL)
*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
+
+clean_arq_element_err:
mutex_unlock(&hw->aq.arq_mutex);
if (i40e_is_nvm_update_op(&e->desc)) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 52e58f30..efd5335 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2688,7 +2688,8 @@
rx_ctx.lrxqthresh = 2;
rx_ctx.crcstrip = 1;
rx_ctx.l2tsel = 1;
- rx_ctx.showiv = 1;
+ /* this controls whether VLAN is stripped from inner headers */
+ rx_ctx.showiv = 0;
#ifdef I40E_FCOE
rx_ctx.fc_ena = (vsi->type == I40E_VSI_FCOE);
#endif
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
index 0940db7..5026773 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq.c
@@ -894,6 +894,13 @@
/* take the lock before we start messing with the ring */
mutex_lock(&hw->aq.arq_mutex);
+ if (hw->aq.arq.count == 0) {
+ i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
+ "AQRX: Admin queue not initialized.\n");
+ ret_code = I40E_ERR_QUEUE_EMPTY;
+ goto clean_arq_element_err;
+ }
+
/* set next_to_use to head */
ntu = (rd32(hw, hw->aq.arq.head) & I40E_VF_ARQH1_ARQH_MASK);
if (ntu == ntc) {
@@ -955,6 +962,8 @@
/* Set pending if needed, unlock and return */
if (pending != NULL)
*pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc);
+
+clean_arq_element_err:
mutex_unlock(&hw->aq.arq_mutex);
return ret_code;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c
index bd9ea0d..1d4e2e0 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mcg.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c
@@ -1184,10 +1184,11 @@
if (prot == MLX4_PROT_ETH) {
/* manage the steering entry for promisc mode */
if (new_entry)
- new_steering_entry(dev, port, steer, index, qp->qpn);
+ err = new_steering_entry(dev, port, steer,
+ index, qp->qpn);
else
- existing_steering_entry(dev, port, steer,
- index, qp->qpn);
+ err = existing_steering_entry(dev, port, steer,
+ index, qp->qpn);
}
if (err && link && index != -1) {
if (index < dev->caps.num_mgms)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
index aa0d5ff..9335e5a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c
@@ -200,25 +200,3 @@
return err;
}
-
-int mlx5_core_query_special_context(struct mlx5_core_dev *dev, u32 *rsvd_lkey)
-{
- struct mlx5_cmd_query_special_contexts_mbox_in in;
- struct mlx5_cmd_query_special_contexts_mbox_out out;
- int err;
-
- memset(&in, 0, sizeof(in));
- memset(&out, 0, sizeof(out));
- in.hdr.opcode = cpu_to_be16(MLX5_CMD_OP_QUERY_SPECIAL_CONTEXTS);
- err = mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out));
- if (err)
- return err;
-
- if (out.hdr.status)
- err = mlx5_cmd_status_to_err(&out.hdr);
-
- *rsvd_lkey = be32_to_cpu(out.resd_lkey);
-
- return err;
-}
-EXPORT_SYMBOL(mlx5_core_query_special_context);
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 2b32e0c..b4f2123 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -6081,7 +6081,7 @@
{
void __iomem *ioaddr = tp->mmio_addr;
struct pci_dev *pdev = tp->pci_dev;
- u16 rg_saw_cnt;
+ int rg_saw_cnt;
u32 data;
static const struct ephy_info e_info_8168h_1[] = {
{ 0x1e, 0x0800, 0x0001 },
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index dd652f2..108a311 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -299,9 +299,10 @@
* Unbound PCI devices are always put in D0, regardless of
* runtime PM status. During probe, the device is set to
* active and the usage count is incremented. If the driver
- * supports runtime PM, it should call pm_runtime_put_noidle()
- * in its probe routine and pm_runtime_get_noresume() in its
- * remove routine.
+ * supports runtime PM, it should call pm_runtime_put_noidle(),
+ * or any other runtime PM helper function decrementing the usage
+ * count, in its probe routine and pm_runtime_get_noresume() in
+ * its remove routine.
*/
pm_runtime_get_sync(dev);
pci_dev->driver = pci_drv;
diff --git a/drivers/staging/android/TODO b/drivers/staging/android/TODO
index 20288fc..8f3ac37 100644
--- a/drivers/staging/android/TODO
+++ b/drivers/staging/android/TODO
@@ -5,5 +5,25 @@
- add proper arch dependencies as needed
- audit userspace interfaces to make sure they are sane
+
+ion/
+ - Remove ION_IOC_SYNC: Flushing for devices should be purely a kernel internal
+ interface on top of dma-buf. flush_for_device needs to be added to dma-buf
+ first.
+ - Remove ION_IOC_CUSTOM: Atm used for cache flushing for cpu access in some
+ vendor trees. Should be replaced with an ioctl on the dma-buf to expose the
+ begin/end_cpu_access hooks to userspace.
+ - Clarify the tricks ion plays with explicitly managing coherency behind the
+ dma api's back (this is absolutely needed for high-perf gpu drivers): Add an
+ explicit coherency management mode to flush_for_device to be used by drivers
+ which want to manage caches themselves and which indicates whether cpu caches
+ need flushing.
+ - With those removed there's probably no use for ION_IOC_IMPORT anymore either
+ since ion would just be the central allocator for shared buffers.
+ - Add dt-binding to expose cma regions as ion heaps, with the rule that any
+ such cma regions must already be used by some device for dma. I.e. ion only
+ exposes existing cma regions and doesn't reserve unecessarily memory when
+ booting a system which doesn't use ion.
+
Please send patches to Greg Kroah-Hartman <greg@kroah.com> and Cc:
Arve Hjønnevåg <arve@android.com> and Riley Andrews <riandrews@android.com>
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 217aa53..6e8d839 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -1179,13 +1179,13 @@
mutex_unlock(&client->lock);
goto end;
}
- mutex_unlock(&client->lock);
handle = ion_handle_create(client, buffer);
- if (IS_ERR(handle))
+ if (IS_ERR(handle)) {
+ mutex_unlock(&client->lock);
goto end;
+ }
- mutex_lock(&client->lock);
ret = ion_handle_add(client, handle);
mutex_unlock(&client->lock);
if (ret) {
diff --git a/drivers/staging/fbtft/fb_uc1611.c b/drivers/staging/fbtft/fb_uc1611.c
index 32f3a9d..5cafa50 100644
--- a/drivers/staging/fbtft/fb_uc1611.c
+++ b/drivers/staging/fbtft/fb_uc1611.c
@@ -76,7 +76,7 @@
/* Set CS active high */
par->spi->mode |= SPI_CS_HIGH;
- ret = par->spi->master->setup(par->spi);
+ ret = spi_setup(par->spi);
if (ret) {
dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
return ret;
diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c
index 88fb2c0..8eae6ef 100644
--- a/drivers/staging/fbtft/fb_watterott.c
+++ b/drivers/staging/fbtft/fb_watterott.c
@@ -169,7 +169,7 @@
/* enable SPI interface by having CS and MOSI low during reset */
save_mode = par->spi->mode;
par->spi->mode |= SPI_CS_HIGH;
- ret = par->spi->master->setup(par->spi); /* set CS inactive low */
+ ret = spi_setup(par->spi); /* set CS inactive low */
if (ret) {
dev_err(par->info->device, "Could not set SPI_CS_HIGH\n");
return ret;
@@ -180,7 +180,7 @@
par->fbtftops.reset(par);
mdelay(1000);
par->spi->mode = save_mode;
- ret = par->spi->master->setup(par->spi);
+ ret = spi_setup(par->spi);
if (ret) {
dev_err(par->info->device, "Could not restore SPI mode\n");
return ret;
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 23392eb..7f5fa3d 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -1436,15 +1436,11 @@
/* 9-bit SPI setup */
if (par->spi && display->buswidth == 9) {
- par->spi->bits_per_word = 9;
- ret = par->spi->master->setup(par->spi);
- if (ret) {
+ if (par->spi->master->bits_per_word_mask & SPI_BPW_MASK(9)) {
+ par->spi->bits_per_word = 9;
+ } else {
dev_warn(&par->spi->dev,
"9-bit SPI not available, emulating using 8-bit.\n");
- par->spi->bits_per_word = 8;
- ret = par->spi->master->setup(par->spi);
- if (ret)
- goto out_release;
/* allocate buffer with room for dc bits */
par->extra = devm_kzalloc(par->info->device,
par->txbuf.len + (par->txbuf.len / 8) + 8,
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
index c763efc..3f380a0 100644
--- a/drivers/staging/fbtft/flexfb.c
+++ b/drivers/staging/fbtft/flexfb.c
@@ -463,15 +463,12 @@
}
par->fbtftops.write_register = fbtft_write_reg8_bus9;
par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
- sdev->bits_per_word = 9;
- ret = sdev->master->setup(sdev);
- if (ret) {
+ if (par->spi->master->bits_per_word_mask
+ & SPI_BPW_MASK(9)) {
+ par->spi->bits_per_word = 9;
+ } else {
dev_warn(dev,
"9-bit SPI not available, emulating using 8-bit.\n");
- sdev->bits_per_word = 8;
- ret = sdev->master->setup(sdev);
- if (ret)
- goto out_release;
/* allocate buffer with room for dc bits */
par->extra = devm_kzalloc(par->info->device,
par->txbuf.len + (par->txbuf.len / 8) + 8,
diff --git a/drivers/staging/lustre/README.txt b/drivers/staging/lustre/README.txt
index cf0ca50..0676243 100644
--- a/drivers/staging/lustre/README.txt
+++ b/drivers/staging/lustre/README.txt
@@ -14,10 +14,8 @@
Lustre has independent Metadata and Data servers that clients can access
in parallel to maximize performance.
-In order to use Lustre client you will need to download lustre client
-tools from
-https://downloads.hpdd.intel.com/public/lustre/latest-feature-release/
-the package name is lustre-client.
+In order to use Lustre client you will need to download the "lustre-client"
+package that contains the userspace tools from http://lustre.org/download/
You will need to install and configure your Lustre servers separately.
@@ -76,12 +74,10 @@
More Information
================
-You can get more information at
-OpenSFS website: http://lustre.opensfs.org/about/
-Intel HPDD wiki: https://wiki.hpdd.intel.com
+You can get more information at the Lustre website: http://wiki.lustre.org/
-Out of tree Lustre client and server code is available at:
-http://git.whamcloud.com/fs/lustre-release.git
+Source for the userspace tools and out-of-tree client and server code
+is available at: http://git.hpdd.intel.com/fs/lustre-release.git
Latest binary packages:
-http://lustre.opensfs.org/download-lustre/
+http://lustre.org/download/
diff --git a/drivers/staging/most/Kconfig b/drivers/staging/most/Kconfig
index d50de03..0b9b9b5 100644
--- a/drivers/staging/most/Kconfig
+++ b/drivers/staging/most/Kconfig
@@ -1,5 +1,6 @@
menuconfig MOST
tristate "MOST driver"
+ depends on HAS_DMA
select MOSTCORE
default n
---help---
diff --git a/drivers/staging/most/hdm-dim2/Kconfig b/drivers/staging/most/hdm-dim2/Kconfig
index 1d4ad1d..fc54876 100644
--- a/drivers/staging/most/hdm-dim2/Kconfig
+++ b/drivers/staging/most/hdm-dim2/Kconfig
@@ -5,6 +5,7 @@
config HDM_DIM2
tristate "DIM2 HDM"
depends on AIM_NETWORK
+ depends on HAS_IOMEM
---help---
Say Y here if you want to connect via MediaLB to network transceiver.
diff --git a/drivers/staging/most/hdm-usb/Kconfig b/drivers/staging/most/hdm-usb/Kconfig
index a482c3f..ec15463 100644
--- a/drivers/staging/most/hdm-usb/Kconfig
+++ b/drivers/staging/most/hdm-usb/Kconfig
@@ -4,7 +4,7 @@
config HDM_USB
tristate "USB HDM"
- depends on USB
+ depends on USB && NET
select AIM_NETWORK
---help---
Say Y here if you want to connect via USB to network tranceiver.
diff --git a/drivers/staging/most/mostcore/Kconfig b/drivers/staging/most/mostcore/Kconfig
index 38abf1b..4717254 100644
--- a/drivers/staging/most/mostcore/Kconfig
+++ b/drivers/staging/most/mostcore/Kconfig
@@ -4,6 +4,7 @@
config MOSTCORE
tristate "MOST Core"
+ depends on HAS_DMA
---help---
Say Y here if you want to enable MOST support.
diff --git a/drivers/staging/unisys/visorbus/Makefile b/drivers/staging/unisys/visorbus/Makefile
index fa27ee5..fc790e7 100644
--- a/drivers/staging/unisys/visorbus/Makefile
+++ b/drivers/staging/unisys/visorbus/Makefile
@@ -10,4 +10,3 @@
visorbus-y += periodic_work.o
ccflags-y += -Idrivers/staging/unisys/include
-ccflags-y += -Idrivers/staging/unisys/visorutil
diff --git a/drivers/staging/unisys/visorbus/visorbus_main.c b/drivers/staging/unisys/visorbus/visorbus_main.c
index 2309f5f..a272b48 100644
--- a/drivers/staging/unisys/visorbus/visorbus_main.c
+++ b/drivers/staging/unisys/visorbus/visorbus_main.c
@@ -37,6 +37,8 @@
#define POLLJIFFIES_TESTWORK 100
#define POLLJIFFIES_NORMALCHANNEL 10
+static int busreg_rc = -ENODEV; /* stores the result from bus registration */
+
static int visorbus_uevent(struct device *xdev, struct kobj_uevent_env *env);
static int visorbus_match(struct device *xdev, struct device_driver *xdrv);
static void fix_vbus_dev_info(struct visor_device *visordev);
@@ -863,6 +865,9 @@
{
int rc = 0;
+ if (busreg_rc < 0)
+ return -ENODEV; /*can't register on a nonexistent bus*/
+
drv->driver.name = drv->name;
drv->driver.bus = &visorbus_type;
drv->driver.probe = visordriver_probe_device;
@@ -885,6 +890,8 @@
if (rc < 0)
return rc;
rc = register_driver_attributes(drv);
+ if (rc < 0)
+ driver_unregister(&drv->driver);
return rc;
}
EXPORT_SYMBOL_GPL(visorbus_register_visor_driver);
@@ -1260,10 +1267,8 @@
static int
create_bus_type(void)
{
- int rc = 0;
-
- rc = bus_register(&visorbus_type);
- return rc;
+ busreg_rc = bus_register(&visorbus_type);
+ return busreg_rc;
}
/** Remove the one-and-only one instance of the visor bus type (visorbus_type).
diff --git a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c
index 8c9da7e..9d3c1e2 100644
--- a/drivers/staging/unisys/visornic/visornic_main.c
+++ b/drivers/staging/unisys/visornic/visornic_main.c
@@ -1189,16 +1189,16 @@
spin_lock_irqsave(&devdata->priv_lock, flags);
atomic_dec(&devdata->num_rcvbuf_in_iovm);
- /* update rcv stats - call it with priv_lock held */
- devdata->net_stats.rx_packets++;
- devdata->net_stats.rx_bytes = skb->len;
-
/* set length to how much was ACTUALLY received -
* NOTE: rcv_done_len includes actual length of data rcvd
* including ethhdr
*/
skb->len = cmdrsp->net.rcv.rcv_done_len;
+ /* update rcv stats - call it with priv_lock held */
+ devdata->net_stats.rx_packets++;
+ devdata->net_stats.rx_bytes += skb->len;
+
/* test enabled while holding lock */
if (!(devdata->enabled && devdata->enab_dis_acked)) {
/* don't process it unless we're in enable mode and until
@@ -1924,13 +1924,16 @@
"%s debugfs_create_dir %s failed\n",
__func__, netdev->name);
err = -ENOMEM;
- goto cleanup_xmit_cmdrsp;
+ goto cleanup_register_netdev;
}
dev_info(&dev->device, "%s success netdev=%s\n",
__func__, netdev->name);
return 0;
+cleanup_register_netdev:
+ unregister_netdev(netdev);
+
cleanup_napi_add:
del_timer_sync(&devdata->irq_poll_timer);
netif_napi_del(&devdata->napi);
@@ -2128,8 +2131,9 @@
if (!dev_num_pool)
goto cleanup_workqueue;
- visorbus_register_visor_driver(&visornic_driver);
- return 0;
+ err = visorbus_register_visor_driver(&visornic_driver);
+ if (!err)
+ return 0;
cleanup_workqueue:
if (visornic_timeout_reset_workqueue) {
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index e8a52f7..51d1734 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -407,6 +407,7 @@
TYPERANGE_UTF8, USE_INITIAL_ONLY);
if (!param)
goto out;
+
/*
* Extra parameters for ISER from RFC-5046
*/
@@ -496,9 +497,9 @@
} else if (!strcmp(param->name, SESSIONTYPE)) {
SET_PSTATE_NEGOTIATE(param);
} else if (!strcmp(param->name, IFMARKER)) {
- SET_PSTATE_NEGOTIATE(param);
+ SET_PSTATE_REJECT(param);
} else if (!strcmp(param->name, OFMARKER)) {
- SET_PSTATE_NEGOTIATE(param);
+ SET_PSTATE_REJECT(param);
} else if (!strcmp(param->name, IFMARKINT)) {
SET_PSTATE_REJECT(param);
} else if (!strcmp(param->name, OFMARKINT)) {
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index dcc424a..88ea4e4 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -62,22 +62,13 @@
struct se_session *se_sess = se_cmd->se_sess;
struct se_node_acl *nacl = se_sess->se_node_acl;
struct se_dev_entry *deve;
+ sense_reason_t ret = TCM_NO_SENSE;
rcu_read_lock();
deve = target_nacl_find_deve(nacl, unpacked_lun);
if (deve) {
atomic_long_inc(&deve->total_cmds);
- if ((se_cmd->data_direction == DMA_TO_DEVICE) &&
- (deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)) {
- pr_err("TARGET_CORE[%s]: Detected WRITE_PROTECTED LUN"
- " Access for 0x%08llx\n",
- se_cmd->se_tfo->get_fabric_name(),
- unpacked_lun);
- rcu_read_unlock();
- return TCM_WRITE_PROTECTED;
- }
-
if (se_cmd->data_direction == DMA_TO_DEVICE)
atomic_long_add(se_cmd->data_length,
&deve->write_bytes);
@@ -93,6 +84,17 @@
percpu_ref_get(&se_lun->lun_ref);
se_cmd->lun_ref_active = true;
+
+ if ((se_cmd->data_direction == DMA_TO_DEVICE) &&
+ (deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)) {
+ pr_err("TARGET_CORE[%s]: Detected WRITE_PROTECTED LUN"
+ " Access for 0x%08llx\n",
+ se_cmd->se_tfo->get_fabric_name(),
+ unpacked_lun);
+ rcu_read_unlock();
+ ret = TCM_WRITE_PROTECTED;
+ goto ref_dev;
+ }
}
rcu_read_unlock();
@@ -109,12 +111,6 @@
unpacked_lun);
return TCM_NON_EXISTENT_LUN;
}
- /*
- * Force WRITE PROTECT for virtual LUN 0
- */
- if ((se_cmd->data_direction != DMA_FROM_DEVICE) &&
- (se_cmd->data_direction != DMA_NONE))
- return TCM_WRITE_PROTECTED;
se_lun = se_sess->se_tpg->tpg_virt_lun0;
se_cmd->se_lun = se_sess->se_tpg->tpg_virt_lun0;
@@ -123,6 +119,15 @@
percpu_ref_get(&se_lun->lun_ref);
se_cmd->lun_ref_active = true;
+
+ /*
+ * Force WRITE PROTECT for virtual LUN 0
+ */
+ if ((se_cmd->data_direction != DMA_FROM_DEVICE) &&
+ (se_cmd->data_direction != DMA_NONE)) {
+ ret = TCM_WRITE_PROTECTED;
+ goto ref_dev;
+ }
}
/*
* RCU reference protected by percpu se_lun->lun_ref taken above that
@@ -130,6 +135,7 @@
* pointer can be kfree_rcu() by the final se_lun->lun_group put via
* target_core_fabric_configfs.c:target_fabric_port_release
*/
+ref_dev:
se_cmd->se_dev = rcu_dereference_raw(se_lun->lun_se_dev);
atomic_long_inc(&se_cmd->se_dev->num_cmds);
@@ -140,7 +146,7 @@
atomic_long_add(se_cmd->data_length,
&se_cmd->se_dev->read_bytes);
- return 0;
+ return ret;
}
EXPORT_SYMBOL(transport_lookup_cmd_lun);
@@ -427,8 +433,6 @@
hlist_del_rcu(&orig->link);
clear_bit(DEF_PR_REG_ACTIVE, &orig->deve_flags);
- rcu_assign_pointer(orig->se_lun, NULL);
- rcu_assign_pointer(orig->se_lun_acl, NULL);
orig->lun_flags = 0;
orig->creation_time = 0;
orig->attach_count--;
@@ -439,6 +443,9 @@
kref_put(&orig->pr_kref, target_pr_kref_release);
wait_for_completion(&orig->pr_comp);
+ rcu_assign_pointer(orig->se_lun, NULL);
+ rcu_assign_pointer(orig->se_lun_acl, NULL);
+
kfree_rcu(orig, rcu_head);
core_scsi3_free_pr_reg_from_nacl(dev, nacl);
diff --git a/drivers/target/target_core_hba.c b/drivers/target/target_core_hba.c
index 9522960..22390e0 100644
--- a/drivers/target/target_core_hba.c
+++ b/drivers/target/target_core_hba.c
@@ -187,5 +187,5 @@
bool target_sense_desc_format(struct se_device *dev)
{
- return dev->transport->get_blocks(dev) > U32_MAX;
+ return (dev) ? dev->transport->get_blocks(dev) > U32_MAX : false;
}
diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 5a9982f..0f19e11 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -105,6 +105,8 @@
mode = FMODE_READ|FMODE_EXCL;
if (!ib_dev->ibd_readonly)
mode |= FMODE_WRITE;
+ else
+ dev->dev_flags |= DF_READ_ONLY;
bd = blkdev_get_by_path(ib_dev->ibd_udev_path, mode, ib_dev);
if (IS_ERR(bd)) {
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 5ab7100..e793311 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -618,7 +618,7 @@
struct se_device *dev,
struct se_node_acl *nacl,
struct se_lun *lun,
- struct se_dev_entry *deve,
+ struct se_dev_entry *dest_deve,
u64 mapped_lun,
unsigned char *isid,
u64 sa_res_key,
@@ -640,7 +640,29 @@
INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list);
atomic_set(&pr_reg->pr_res_holders, 0);
pr_reg->pr_reg_nacl = nacl;
- pr_reg->pr_reg_deve = deve;
+ /*
+ * For destination registrations for ALL_TG_PT=1 and SPEC_I_PT=1,
+ * the se_dev_entry->pr_ref will have been already obtained by
+ * core_get_se_deve_from_rtpi() or __core_scsi3_alloc_registration().
+ *
+ * Otherwise, locate se_dev_entry now and obtain a reference until
+ * registration completes in __core_scsi3_add_registration().
+ */
+ if (dest_deve) {
+ pr_reg->pr_reg_deve = dest_deve;
+ } else {
+ rcu_read_lock();
+ pr_reg->pr_reg_deve = target_nacl_find_deve(nacl, mapped_lun);
+ if (!pr_reg->pr_reg_deve) {
+ rcu_read_unlock();
+ pr_err("Unable to locate PR deve %s mapped_lun: %llu\n",
+ nacl->initiatorname, mapped_lun);
+ kmem_cache_free(t10_pr_reg_cache, pr_reg);
+ return NULL;
+ }
+ kref_get(&pr_reg->pr_reg_deve->pr_kref);
+ rcu_read_unlock();
+ }
pr_reg->pr_res_mapped_lun = mapped_lun;
pr_reg->pr_aptpl_target_lun = lun->unpacked_lun;
pr_reg->tg_pt_sep_rtpi = lun->lun_rtpi;
@@ -936,17 +958,29 @@
!(strcmp(pr_reg->pr_tport, t_port)) &&
(pr_reg->pr_reg_tpgt == tpgt) &&
(pr_reg->pr_aptpl_target_lun == target_lun)) {
+ /*
+ * Obtain the ->pr_reg_deve pointer + reference, that
+ * is released by __core_scsi3_add_registration() below.
+ */
+ rcu_read_lock();
+ pr_reg->pr_reg_deve = target_nacl_find_deve(nacl, mapped_lun);
+ if (!pr_reg->pr_reg_deve) {
+ pr_err("Unable to locate PR APTPL %s mapped_lun:"
+ " %llu\n", nacl->initiatorname, mapped_lun);
+ rcu_read_unlock();
+ continue;
+ }
+ kref_get(&pr_reg->pr_reg_deve->pr_kref);
+ rcu_read_unlock();
pr_reg->pr_reg_nacl = nacl;
pr_reg->tg_pt_sep_rtpi = lun->lun_rtpi;
-
list_del(&pr_reg->pr_reg_aptpl_list);
spin_unlock(&pr_tmpl->aptpl_reg_lock);
/*
* At this point all of the pointers in *pr_reg will
* be setup, so go ahead and add the registration.
*/
-
__core_scsi3_add_registration(dev, nacl, pr_reg, 0, 0);
/*
* If this registration is the reservation holder,
@@ -1044,18 +1078,11 @@
__core_scsi3_dump_registration(tfo, dev, nacl, pr_reg, register_type);
spin_unlock(&pr_tmpl->registration_lock);
-
- rcu_read_lock();
- deve = pr_reg->pr_reg_deve;
- if (deve)
- set_bit(DEF_PR_REG_ACTIVE, &deve->deve_flags);
- rcu_read_unlock();
-
/*
* Skip extra processing for ALL_TG_PT=0 or REGISTER_AND_MOVE.
*/
if (!pr_reg->pr_reg_all_tg_pt || register_move)
- return;
+ goto out;
/*
* Walk pr_reg->pr_reg_atp_list and add registrations for ALL_TG_PT=1
* allocated in __core_scsi3_alloc_registration()
@@ -1075,19 +1102,31 @@
__core_scsi3_dump_registration(tfo, dev, nacl_tmp, pr_reg_tmp,
register_type);
spin_unlock(&pr_tmpl->registration_lock);
-
+ /*
+ * Drop configfs group dependency reference and deve->pr_kref
+ * obtained from __core_scsi3_alloc_registration() code.
+ */
rcu_read_lock();
deve = pr_reg_tmp->pr_reg_deve;
- if (deve)
+ if (deve) {
set_bit(DEF_PR_REG_ACTIVE, &deve->deve_flags);
+ core_scsi3_lunacl_undepend_item(deve);
+ pr_reg_tmp->pr_reg_deve = NULL;
+ }
rcu_read_unlock();
-
- /*
- * Drop configfs group dependency reference from
- * __core_scsi3_alloc_registration()
- */
- core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve);
}
+out:
+ /*
+ * Drop deve->pr_kref obtained in __core_scsi3_do_alloc_registration()
+ */
+ rcu_read_lock();
+ deve = pr_reg->pr_reg_deve;
+ if (deve) {
+ set_bit(DEF_PR_REG_ACTIVE, &deve->deve_flags);
+ kref_put(&deve->pr_kref, target_pr_kref_release);
+ pr_reg->pr_reg_deve = NULL;
+ }
+ rcu_read_unlock();
}
static int core_scsi3_alloc_registration(
@@ -1785,9 +1824,11 @@
dest_node_acl->initiatorname, i_buf, (dest_se_deve) ?
dest_se_deve->mapped_lun : 0);
- if (!dest_se_deve)
+ if (!dest_se_deve) {
+ kref_put(&local_pr_reg->pr_reg_deve->pr_kref,
+ target_pr_kref_release);
continue;
-
+ }
core_scsi3_lunacl_undepend_item(dest_se_deve);
core_scsi3_nodeacl_undepend_item(dest_node_acl);
core_scsi3_tpg_undepend_item(dest_tpg);
@@ -1823,9 +1864,11 @@
kmem_cache_free(t10_pr_reg_cache, dest_pr_reg);
- if (!dest_se_deve)
+ if (!dest_se_deve) {
+ kref_put(&local_pr_reg->pr_reg_deve->pr_kref,
+ target_pr_kref_release);
continue;
-
+ }
core_scsi3_lunacl_undepend_item(dest_se_deve);
core_scsi3_nodeacl_undepend_item(dest_node_acl);
core_scsi3_tpg_undepend_item(dest_tpg);
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index 2d0381d..5fb9dd7 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -668,7 +668,10 @@
list_add_tail(&lun->lun_dev_link, &dev->dev_sep_list);
spin_unlock(&dev->se_port_lock);
- lun->lun_access = lun_access;
+ if (dev->dev_flags & DF_READ_ONLY)
+ lun->lun_access = TRANSPORT_LUNFLAGS_READ_ONLY;
+ else
+ lun->lun_access = lun_access;
if (!(dev->se_hba->hba_flags & HBA_FLAGS_INTERNAL_USE))
hlist_add_head_rcu(&lun->link, &tpg->tpg_lun_hlist);
mutex_unlock(&tpg->tpg_lun_mutex);
diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c
index 7ff9627..e570ff0 100644
--- a/drivers/thermal/power_allocator.c
+++ b/drivers/thermal/power_allocator.c
@@ -144,6 +144,16 @@
switch_on_temp = 0;
temperature_threshold = control_temp - switch_on_temp;
+ /*
+ * estimate_pid_constants() tries to find appropriate default
+ * values for thermal zones that don't provide them. If a
+ * system integrator has configured a thermal zone with two
+ * passive trip points at the same temperature, that person
+ * hasn't put any effort to set up the thermal zone properly
+ * so just give up.
+ */
+ if (!temperature_threshold)
+ return;
if (!tz->tzp->k_po || force)
tz->tzp->k_po = int_to_frac(sustainable_power) /
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index c68fe12..20a41f7 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -643,7 +643,7 @@
{
.class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0,
.vendor = PCI_VENDOR_ID_INTEL, .device = 0x156c,
- .subvendor = 0x2222, .subdevice = 0x1111,
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID,
},
{ 0,}
};
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 54e6c8d..b1e0ba3 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2910,3 +2910,5 @@
}
#endif /* CONFIG_SERIAL_8250_CONSOLE */
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 867e9f3..dcc50c87 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -61,7 +61,7 @@
{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
- { .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data},
+ { .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index 9eae1a1..4456d2c 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -12,6 +12,7 @@
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/usb/chipidea.h>
@@ -30,18 +31,36 @@
.flags = CI_HDRC_DISABLE_STREAMING,
};
+static struct ci_hdrc_platform_data ci_zynq_pdata = {
+ .capoffset = DEF_CAPOFFSET,
+};
+
+static const struct of_device_id ci_hdrc_usb2_of_match[] = {
+ { .compatible = "chipidea,usb2"},
+ { .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
+ { }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
+
static int ci_hdrc_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ci_hdrc_usb2_priv *priv;
struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
int ret;
+ const struct of_device_id *match;
if (!ci_pdata) {
ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
*ci_pdata = ci_default_pdata; /* struct copy */
}
+ match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
+ if (match && match->data) {
+ /* struct copy */
+ *ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
+ }
+
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -96,12 +115,6 @@
return 0;
}
-static const struct of_device_id ci_hdrc_usb2_of_match[] = {
- { .compatible = "chipidea,usb2" },
- { }
-};
-MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
-
static struct platform_driver ci_hdrc_usb2_driver = {
.probe = ci_hdrc_usb2_probe,
.remove = ci_hdrc_usb2_remove,
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index a637da2..8223fe7 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -656,6 +656,44 @@
return 0;
}
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ int direction, retval = 0;
+ unsigned long flags;
+
+ if (ep == NULL || hwep->ep.desc == NULL)
+ return -EINVAL;
+
+ if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+ return -EOPNOTSUPP;
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ if (value && hwep->dir == TX && check_transfer &&
+ !list_empty(&hwep->qh.queue) &&
+ !usb_endpoint_xfer_control(hwep->ep.desc)) {
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return -EAGAIN;
+ }
+
+ direction = hwep->dir;
+ do {
+ retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+ if (!value)
+ hwep->wedge = 0;
+
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+ hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+ } while (hwep->dir != direction);
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return retval;
+}
+
+
/**
* _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
* @gadget: gadget
@@ -1051,7 +1089,7 @@
num += ci->hw_ep_max / 2;
spin_unlock(&ci->lock);
- err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
+ err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
spin_lock(&ci->lock);
if (!err)
isr_setup_status_phase(ci);
@@ -1117,8 +1155,8 @@
if (err < 0) {
spin_unlock(&ci->lock);
- if (usb_ep_set_halt(&hwep->ep))
- dev_err(ci->dev, "error: ep_set_halt\n");
+ if (_ep_set_halt(&hwep->ep, 1, false))
+ dev_err(ci->dev, "error: _ep_set_halt\n");
spin_lock(&ci->lock);
}
}
@@ -1149,9 +1187,9 @@
err = isr_setup_status_phase(ci);
if (err < 0) {
spin_unlock(&ci->lock);
- if (usb_ep_set_halt(&hwep->ep))
+ if (_ep_set_halt(&hwep->ep, 1, false))
dev_err(ci->dev,
- "error: ep_set_halt\n");
+ "error: _ep_set_halt\n");
spin_lock(&ci->lock);
}
}
@@ -1397,41 +1435,7 @@
*/
static int ep_set_halt(struct usb_ep *ep, int value)
{
- struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
- int direction, retval = 0;
- unsigned long flags;
-
- if (ep == NULL || hwep->ep.desc == NULL)
- return -EINVAL;
-
- if (usb_endpoint_xfer_isoc(hwep->ep.desc))
- return -EOPNOTSUPP;
-
- spin_lock_irqsave(hwep->lock, flags);
-
-#ifndef STALL_IN
- /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
- if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
- !list_empty(&hwep->qh.queue)) {
- spin_unlock_irqrestore(hwep->lock, flags);
- return -EAGAIN;
- }
-#endif
-
- direction = hwep->dir;
- do {
- retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
-
- if (!value)
- hwep->wedge = 0;
-
- if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
- hwep->dir = (hwep->dir == TX) ? RX : TX;
-
- } while (hwep->dir != direction);
-
- spin_unlock_irqrestore(hwep->lock, flags);
- return retval;
+ return _ep_set_halt(ep, value, true);
}
/**
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index b2a540b..b9ddf0c1 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -112,7 +112,7 @@
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 16;
} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
- desc->bmAttributes > 2) {
+ USB_SS_MULT(desc->bmAttributes) > 3) {
dev_warn(ddev, "Isoc endpoint has Mult of %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to 3\n", desc->bmAttributes + 1,
@@ -121,7 +121,8 @@
}
if (usb_endpoint_xfer_isoc(&ep->desc))
- max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+ max_tx = (desc->bMaxBurst + 1) *
+ (USB_SS_MULT(desc->bmAttributes)) *
usb_endpoint_maxp(&ep->desc);
else if (usb_endpoint_xfer_int(&ep->desc))
max_tx = usb_endpoint_maxp(&ep->desc) *
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index a5a1b7c..22e9606 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -514,8 +514,6 @@
goto err1;
}
- dwc3_omap_enable_irqs(omap);
-
ret = dwc3_omap_extcon_register(omap);
if (ret < 0)
goto err2;
@@ -526,6 +524,8 @@
goto err3;
}
+ dwc3_omap_enable_irqs(omap);
+
return 0;
err3:
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0c25704..1e8bdf8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2665,8 +2665,6 @@
int i;
irqreturn_t ret = IRQ_NONE;
- spin_lock(&dwc->lock);
-
for (i = 0; i < dwc->num_event_buffers; i++) {
irqreturn_t status;
@@ -2675,8 +2673,6 @@
ret = status;
}
- spin_unlock(&dwc->lock);
-
return ret;
}
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 978435a..6399c10 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -186,6 +186,7 @@
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
ep->claimed = false;
+ ep->driver_data = NULL;
}
gadget->in_epnum = 0;
gadget->out_epnum = 0;
diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index fdacddb..175ca93 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -3138,8 +3138,8 @@
writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
if (dev->irq_registered)
free_irq(pdev->irq, dev);
- if (dev->regs)
- iounmap(dev->regs);
+ if (dev->virt_addr)
+ iounmap(dev->virt_addr);
if (dev->mem_region)
release_mem_region(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
@@ -3226,17 +3226,13 @@
/* init */
dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
- if (!dev) {
- retval = -ENOMEM;
- goto finished;
- }
+ if (!dev)
+ return -ENOMEM;
/* pci setup */
if (pci_enable_device(pdev) < 0) {
- kfree(dev);
- dev = NULL;
retval = -ENODEV;
- goto finished;
+ goto err_pcidev;
}
dev->active = 1;
@@ -3246,28 +3242,22 @@
if (!request_mem_region(resource, len, name)) {
dev_dbg(&pdev->dev, "pci device used already\n");
- kfree(dev);
- dev = NULL;
retval = -EBUSY;
- goto finished;
+ goto err_memreg;
}
dev->mem_region = 1;
dev->virt_addr = ioremap_nocache(resource, len);
if (dev->virt_addr == NULL) {
dev_dbg(&pdev->dev, "start address cannot be mapped\n");
- kfree(dev);
- dev = NULL;
retval = -EFAULT;
- goto finished;
+ goto err_ioremap;
}
if (!pdev->irq) {
dev_err(&pdev->dev, "irq not set\n");
- kfree(dev);
- dev = NULL;
retval = -ENODEV;
- goto finished;
+ goto err_irq;
}
spin_lock_init(&dev->lock);
@@ -3283,10 +3273,8 @@
if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
- kfree(dev);
- dev = NULL;
retval = -EBUSY;
- goto finished;
+ goto err_irq;
}
dev->irq_registered = 1;
@@ -3314,8 +3302,17 @@
return 0;
finished:
- if (dev)
- udc_pci_remove(pdev);
+ udc_pci_remove(pdev);
+ return retval;
+
+err_irq:
+ iounmap(dev->virt_addr);
+err_ioremap:
+ release_mem_region(resource, len);
+err_memreg:
+ pci_disable_device(pdev);
+err_pcidev:
+ kfree(dev);
return retval;
}
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 3dfada8..f0f2b06 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2002,6 +2002,17 @@
ep->udc = udc;
INIT_LIST_HEAD(&ep->queue);
+ if (ep->index == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = ep->can_isoc;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
+
if (i)
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 5c8f4ef..ccb9c21 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -324,8 +324,7 @@
bdc->scratchpad.buff, bdc->scratchpad.sp_dma);
/* Destroy the dma pools */
- if (bdc->bd_table_pool)
- dma_pool_destroy(bdc->bd_table_pool);
+ dma_pool_destroy(bdc->bd_table_pool);
/* Free the bdc_ep array */
kfree(bdc->bdc_ep_array);
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 1379ad4..27af0f0 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1348,6 +1348,7 @@
{
struct dummy *dum = dum_hcd->dum;
struct dummy_request *req;
+ int sent = 0;
top:
/* if there's no request queued, the device is NAKing; return */
@@ -1385,12 +1386,15 @@
if (len == 0)
break;
- /* use an extra pass for the final short packet */
- if (len > ep->ep.maxpacket) {
- rescan = 1;
- len -= (len % ep->ep.maxpacket);
+ /* send multiple of maxpacket first, then remainder */
+ if (len >= ep->ep.maxpacket) {
+ is_short = 0;
+ if (len % ep->ep.maxpacket)
+ rescan = 1;
+ len -= len % ep->ep.maxpacket;
+ } else {
+ is_short = 1;
}
- is_short = (len % ep->ep.maxpacket) != 0;
len = dummy_perform_transfer(urb, req, len);
@@ -1399,6 +1403,7 @@
req->req.status = len;
} else {
limit -= len;
+ sent += len;
urb->actual_length += len;
req->req.actual += len;
}
@@ -1421,7 +1426,7 @@
*status = -EOVERFLOW;
else
*status = 0;
- } else if (!to_host) {
+ } else {
*status = 0;
if (host_len > dev_len)
req->req.status = -EOVERFLOW;
@@ -1429,15 +1434,24 @@
req->req.status = 0;
}
- /* many requests terminate without a short packet */
+ /*
+ * many requests terminate without a short packet.
+ * send a zlp if demanded by flags.
+ */
} else {
- if (req->req.length == req->req.actual
- && !req->req.zero)
- req->req.status = 0;
- if (urb->transfer_buffer_length == urb->actual_length
- && !(urb->transfer_flags
- & URB_ZERO_PACKET))
- *status = 0;
+ if (req->req.length == req->req.actual) {
+ if (req->req.zero && to_host)
+ rescan = 1;
+ else
+ req->req.status = 0;
+ }
+ if (urb->transfer_buffer_length == urb->actual_length) {
+ if (urb->transfer_flags & URB_ZERO_PACKET &&
+ !to_host)
+ rescan = 1;
+ else
+ *status = 0;
+ }
}
/* device side completion --> continuable */
@@ -1460,7 +1474,7 @@
if (rescan)
goto top;
}
- return limit;
+ return sent;
}
static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep)
@@ -1890,7 +1904,7 @@
default:
treat_control_like_bulk:
ep->last_io = jiffies;
- total = transfer(dum_hcd, urb, ep, limit, &status);
+ total -= transfer(dum_hcd, urb, ep, limit, &status);
break;
}
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 8aa2593..b9429bc 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2117,8 +2117,7 @@
return -EBUSY;
gr_dfs_delete(dev);
- if (dev->desc_pool)
- dma_pool_destroy(dev->desc_pool);
+ dma_pool_destroy(dev->desc_pool);
platform_set_drvdata(pdev, NULL);
gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req);
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index 4c48969..dafe74e 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1767,8 +1767,7 @@
usb_del_gadget_udc(&u3d->gadget);
/* free memory allocated in probe */
- if (u3d->trb_pool)
- dma_pool_destroy(u3d->trb_pool);
+ dma_pool_destroy(u3d->trb_pool);
if (u3d->ep_context)
dma_free_coherent(&dev->dev, u3d->ep_context_size,
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index 339af51..81b6229 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -2100,8 +2100,7 @@
}
/* free memory allocated in probe */
- if (udc->dtd_pool)
- dma_pool_destroy(udc->dtd_pool);
+ dma_pool_destroy(udc->dtd_pool);
if (udc->ep_dqh)
dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9a8c936..41f841f 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1498,10 +1498,10 @@
* use Event Data TRBs, and we don't chain in a link TRB on short
* transfers, we're basically dividing by 1.
*
- * xHCI 1.0 specification indicates that the Average TRB Length should
- * be set to 8 for control endpoints.
+ * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length
+ * should be set to 8 for control endpoints.
*/
- if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100)
+ if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
else
ep_ctx->tx_info |=
@@ -1792,8 +1792,7 @@
int size;
int i, j, num_ports;
- if (timer_pending(&xhci->cmd_timer))
- del_timer_sync(&xhci->cmd_timer);
+ del_timer_sync(&xhci->cmd_timer);
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -2321,6 +2320,10 @@
INIT_LIST_HEAD(&xhci->cmd_list);
+ /* init command timeout timer */
+ setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
+ (unsigned long)xhci);
+
page_size = readl(&xhci->op_regs->page_size);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Supported page size register = 0x%x", page_size);
@@ -2505,10 +2508,6 @@
"Wrote ERST address to ir_set 0.");
xhci_print_ir_set(xhci, 0);
- /* init command timeout timer */
- setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
- (unsigned long)xhci);
-
/*
* XXX: Might need to set the Interrupter Moderation Register to
* something other than the default (~1ms minimum between interrupts).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5590eac..c79d336 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -180,51 +180,6 @@
"QUIRK: Resetting on resume");
}
-/*
- * In some Intel xHCI controllers, in order to get D3 working,
- * through a vendor specific SSIC CONFIG register at offset 0x883c,
- * SSIC PORT need to be marked as "unused" before putting xHCI
- * into D3. After D3 exit, the SSIC port need to be marked as "used".
- * Without this change, xHCI might not enter D3 state.
- * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
- * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
- */
-static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
-{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
- u32 val;
- void __iomem *reg;
-
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
-
- reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
-
- /* Notify SSIC that SSIC profile programming is not done */
- val = readl(reg) & ~PROG_DONE;
- writel(val, reg);
-
- /* Mark SSIC port as unused(suspend) or used(resume) */
- val = readl(reg);
- if (suspend)
- val |= SSIC_PORT_UNUSED;
- else
- val &= ~SSIC_PORT_UNUSED;
- writel(val, reg);
-
- /* Notify SSIC that SSIC profile programming is done */
- val = readl(reg) | PROG_DONE;
- writel(val, reg);
- readl(reg);
- }
-
- reg = (void __iomem *) xhci->cap_regs + 0x80a4;
- val = readl(reg);
- writel(val | BIT(28), reg);
- readl(reg);
-}
-
#ifdef CONFIG_ACPI
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
{
@@ -345,6 +300,51 @@
}
#ifdef CONFIG_PM
+/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ u32 val;
+ void __iomem *reg;
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+ reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+ /* Notify SSIC that SSIC profile programming is not done */
+ val = readl(reg) & ~PROG_DONE;
+ writel(val, reg);
+
+ /* Mark SSIC port as unused(suspend) or used(resume) */
+ val = readl(reg);
+ if (suspend)
+ val |= SSIC_PORT_UNUSED;
+ else
+ val &= ~SSIC_PORT_UNUSED;
+ writel(val, reg);
+
+ /* Notify SSIC that SSIC profile programming is done */
+ val = readl(reg) | PROG_DONE;
+ writel(val, reg);
+ readl(reg);
+ }
+
+ reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+ val = readl(reg);
+ writel(val | BIT(28), reg);
+ readl(reg);
+}
+
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a47a1e8..43291f9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -302,6 +302,15 @@
ret = xhci_handshake(&xhci->op_regs->cmd_ring,
CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
if (ret < 0) {
+ /* we are about to kill xhci, give it one more chance */
+ xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+ &xhci->op_regs->cmd_ring);
+ udelay(1000);
+ ret = xhci_handshake(&xhci->op_regs->cmd_ring,
+ CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
+ if (ret == 0)
+ return 0;
+
xhci_err(xhci, "Stopped the command ring failed, "
"maybe the host is dead\n");
xhci->xhc_state |= XHCI_STATE_DYING;
@@ -3461,8 +3470,8 @@
if (start_cycle == 0)
field |= 0x1;
- /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
- if (xhci->hci_version == 0x100) {
+ /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+ if (xhci->hci_version >= 0x100) {
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_TX_TYPE(TRB_DATA_IN);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6b0f4a4..9957bd9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -146,7 +146,8 @@
"waited %u microseconds.\n",
XHCI_MAX_HALT_USEC);
if (!ret)
- xhci->xhc_state &= ~XHCI_STATE_HALTED;
+ xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+
return ret;
}
@@ -654,15 +655,6 @@
}
EXPORT_SYMBOL_GPL(xhci_run);
-static void xhci_only_stop_hcd(struct usb_hcd *hcd)
-{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
- spin_lock_irq(&xhci->lock);
- xhci_halt(xhci);
- spin_unlock_irq(&xhci->lock);
-}
-
/*
* Stop xHCI driver.
*
@@ -677,12 +669,14 @@
u32 temp;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- if (!usb_hcd_is_primary_hcd(hcd)) {
- xhci_only_stop_hcd(xhci->shared_hcd);
+ if (xhci->xhc_state & XHCI_STATE_HALTED)
return;
- }
+ mutex_lock(&xhci->mutex);
spin_lock_irq(&xhci->lock);
+ xhci->xhc_state |= XHCI_STATE_HALTED;
+ xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+
/* Make sure the xHC is halted for a USB3 roothub
* (xhci_stop() could be called as part of failed init).
*/
@@ -717,6 +711,7 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_stop completed - status = %x",
readl(&xhci->op_regs->status));
+ mutex_unlock(&xhci->mutex);
}
/*
@@ -3793,6 +3788,9 @@
mutex_lock(&xhci->mutex);
+ if (xhci->xhc_state) /* dying or halted */
+ goto out;
+
if (!udev->slot_id) {
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Bad Slot ID %d", udev->slot_id);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 514a6cd..4a518ff 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1051,6 +1051,7 @@
* (c) peripheral initiates, using SRP
*/
if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+ musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
musb->is_active = 1;
} else {
@@ -2448,6 +2449,9 @@
struct musb *musb = dev_to_musb(dev);
unsigned long flags;
+ musb_platform_disable(musb);
+ musb_generic_disable(musb);
+
spin_lock_irqsave(&musb->lock, flags);
if (is_peripheral_active(musb)) {
@@ -2501,6 +2505,9 @@
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+
+ musb_start(musb);
+
return 0;
}
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index d07cafb..e499b86 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -551,6 +551,9 @@
} else {
cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
+ /* delay to drain to cppi dma pipeline for isoch */
+ udelay(250);
+
csr = musb_readw(epio, MUSB_RXCSR);
csr &= ~(MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_DMAENAB);
musb_writew(epio, MUSB_RXCSR, csr);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index a0cfead..84512d1 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -225,8 +225,11 @@
dsps_writel(reg_base, wrp->epintr_set, epmask);
dsps_writel(reg_base, wrp->coreintr_set, coremask);
- /* start polling for ID change. */
- mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout));
+ /* start polling for ID change in dual-role idle mode */
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
+ musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+ mod_timer(&glue->timer, jiffies +
+ msecs_to_jiffies(wrp->poll_timeout));
dsps_musb_try_idle(musb, 0);
}
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 39168fe..b2685e7 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -379,6 +379,8 @@
{}
};
+MODULE_DEVICE_TABLE(of, ux500_match);
+
static struct platform_driver ux500_driver = {
.probe = ux500_probe,
.remove = ux500_remove,
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7d3beee..1731324 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -155,7 +155,7 @@
config USB_QCOM_8X16_PHY
tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
depends on ARCH_QCOM || COMPILE_TEST
- depends on RESET_CONTROLLER
+ depends on RESET_CONTROLLER && EXTCON
select USB_PHY
select USB_ULPI_VIEWPORT
help
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index ec6ecd0..5320cb8 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -232,7 +232,8 @@
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
if (gpio_is_valid(pdata->gpio_reset)) {
- err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+ err = devm_gpio_request_one(dev, pdata->gpio_reset,
+ GPIOF_ACTIVE_LOW,
dev_name(dev));
if (!err)
nop->gpiod_reset =
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 8a55b37..db68156 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -31,6 +31,7 @@
{ "isp1301", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
static struct i2c_client *isp1301_i2c_client;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6d1941a..6956c4f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -278,6 +278,10 @@
#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
+#define ZTE_PRODUCT_ZM8620_X 0x0396
+#define ZTE_PRODUCT_ME3620_MBIM 0x0426
+#define ZTE_PRODUCT_ME3620_X 0x1432
+#define ZTE_PRODUCT_ME3620_L 0x1433
#define ZTE_PRODUCT_AC2726 0xfff1
#define ZTE_PRODUCT_MG880 0xfffd
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
@@ -544,6 +548,18 @@
.sendsetup = BIT(1) | BIT(2) | BIT(3),
};
+static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
+ .reserved = BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_me3620_xl_blacklist = {
+ .reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
+static const struct option_blacklist_info zte_zm8620_x_blacklist = {
+ .reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
@@ -1591,6 +1607,14 @@
.driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
+ .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
+ .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
+ .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
+ .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 6c3734d..d3ea90b 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -80,6 +80,8 @@
static int whiteheat_firmware_attach(struct usb_serial *serial);
/* function prototypes for the Connect Tech WhiteHEAT serial converter */
+static int whiteheat_probe(struct usb_serial *serial,
+ const struct usb_device_id *id);
static int whiteheat_attach(struct usb_serial *serial);
static void whiteheat_release(struct usb_serial *serial);
static int whiteheat_port_probe(struct usb_serial_port *port);
@@ -116,6 +118,7 @@
.description = "Connect Tech - WhiteHEAT",
.id_table = id_table_std,
.num_ports = 4,
+ .probe = whiteheat_probe,
.attach = whiteheat_attach,
.release = whiteheat_release,
.port_probe = whiteheat_port_probe,
@@ -217,6 +220,34 @@
/*****************************************************************************
* Connect Tech's White Heat serial driver functions
*****************************************************************************/
+
+static int whiteheat_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ size_t num_bulk_in = 0;
+ size_t num_bulk_out = 0;
+ size_t min_num_bulk;
+ unsigned int i;
+
+ iface_desc = serial->interface->cur_altsetting;
+
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ endpoint = &iface_desc->endpoint[i].desc;
+ if (usb_endpoint_is_bulk_in(endpoint))
+ ++num_bulk_in;
+ if (usb_endpoint_is_bulk_out(endpoint))
+ ++num_bulk_out;
+ }
+
+ min_num_bulk = COMMAND_PORT + 1;
+ if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk)
+ return -ENODEV;
+
+ return 0;
+}
+
static int whiteheat_attach(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index c68edc1..79e1aa1 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -817,8 +817,9 @@
tristate "Intel TCO Timer/Watchdog"
depends on (X86 || IA64) && PCI
select WATCHDOG_CORE
+ depends on I2C || I2C=n
select LPC_ICH if !EXPERT
- select I2C_I801 if !EXPERT
+ select I2C_I801 if !EXPERT && I2C
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
index 66c3e65..8a5ce5b 100644
--- a/drivers/watchdog/bcm2835_wdt.c
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -36,6 +36,13 @@
#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
#define PM_RSTC_RESET 0x00000102
+/*
+ * The Raspberry Pi firmware uses the RSTS register to know which partiton
+ * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10.
+ * Partiton 63 is a special partition used by the firmware to indicate halt.
+ */
+#define PM_RSTS_RASPBERRYPI_HALT 0x555
+
#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
@@ -151,8 +158,7 @@
* hard reset.
*/
val = readl_relaxed(wdt->base + PM_RSTS);
- val &= PM_RSTC_WRCFG_CLR;
- val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
+ val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT;
writel_relaxed(val, wdt->base + PM_RSTS);
/* Continue with normal reset mechanism */
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index cc1bdfc..006e234 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -303,6 +303,7 @@
},
{},
};
+MODULE_DEVICE_TABLE(of, gef_wdt_ids);
static struct platform_driver gef_wdt_driver = {
.driver = {
diff --git a/drivers/watchdog/mena21_wdt.c b/drivers/watchdog/mena21_wdt.c
index 6901300..098fa9c3 100644
--- a/drivers/watchdog/mena21_wdt.c
+++ b/drivers/watchdog/mena21_wdt.c
@@ -253,6 +253,7 @@
{ .compatible = "men,a021-wdt" },
{ },
};
+MODULE_DEVICE_TABLE(of, a21_wdt_ids);
static struct platform_driver a21_wdt_driver = {
.probe = a21_wdt_probe,
diff --git a/drivers/watchdog/moxart_wdt.c b/drivers/watchdog/moxart_wdt.c
index 2789da2..60b0605 100644
--- a/drivers/watchdog/moxart_wdt.c
+++ b/drivers/watchdog/moxart_wdt.c
@@ -168,6 +168,7 @@
{ .compatible = "moxa,moxart-watchdog" },
{ },
};
+MODULE_DEVICE_TABLE(of, moxart_watchdog_match);
static struct platform_driver moxart_wdt_driver = {
.probe = moxart_wdt_probe,
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index aa0dc25..afa09fc 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -444,6 +444,48 @@
return 0;
}
+/* Server has provided av pairs/target info in the type 2 challenge
+ * packet and we have plucked it and stored within smb session.
+ * We parse that blob here to find the server given timestamp
+ * as part of ntlmv2 authentication (or local current time as
+ * default in case of failure)
+ */
+static __le64
+find_timestamp(struct cifs_ses *ses)
+{
+ unsigned int attrsize;
+ unsigned int type;
+ unsigned int onesize = sizeof(struct ntlmssp2_name);
+ unsigned char *blobptr;
+ unsigned char *blobend;
+ struct ntlmssp2_name *attrptr;
+
+ if (!ses->auth_key.len || !ses->auth_key.response)
+ return 0;
+
+ blobptr = ses->auth_key.response;
+ blobend = blobptr + ses->auth_key.len;
+
+ while (blobptr + onesize < blobend) {
+ attrptr = (struct ntlmssp2_name *) blobptr;
+ type = le16_to_cpu(attrptr->type);
+ if (type == NTLMSSP_AV_EOL)
+ break;
+ blobptr += 2; /* advance attr type */
+ attrsize = le16_to_cpu(attrptr->length);
+ blobptr += 2; /* advance attr size */
+ if (blobptr + attrsize > blobend)
+ break;
+ if (type == NTLMSSP_AV_TIMESTAMP) {
+ if (attrsize == sizeof(u64))
+ return *((__le64 *)blobptr);
+ }
+ blobptr += attrsize; /* advance attr value */
+ }
+
+ return cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+}
+
static int calc_ntlmv2_hash(struct cifs_ses *ses, char *ntlmv2_hash,
const struct nls_table *nls_cp)
{
@@ -641,6 +683,7 @@
struct ntlmv2_resp *ntlmv2;
char ntlmv2_hash[16];
unsigned char *tiblob = NULL; /* target info blob */
+ __le64 rsp_timestamp;
if (ses->server->negflavor == CIFS_NEGFLAVOR_EXTENDED) {
if (!ses->domainName) {
@@ -659,6 +702,12 @@
}
}
+ /* Must be within 5 minutes of the server (or in range +/-2h
+ * in case of Mac OS X), so simply carry over server timestamp
+ * (as Windows 7 does)
+ */
+ rsp_timestamp = find_timestamp(ses);
+
baselen = CIFS_SESS_KEY_SIZE + sizeof(struct ntlmv2_resp);
tilen = ses->auth_key.len;
tiblob = ses->auth_key.response;
@@ -675,8 +724,8 @@
(ses->auth_key.response + CIFS_SESS_KEY_SIZE);
ntlmv2->blob_signature = cpu_to_le32(0x00000101);
ntlmv2->reserved = 0;
- /* Must be within 5 minutes of the server */
- ntlmv2->time = cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ ntlmv2->time = rsp_timestamp;
+
get_random_bytes(&ntlmv2->client_chal, sizeof(ntlmv2->client_chal));
ntlmv2->reserved2 = 0;
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index df91bcf..18da19f 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -50,9 +50,13 @@
break;
default:
server->echoes = true;
- server->oplocks = true;
+ if (enable_oplocks) {
+ server->oplocks = true;
+ server->oplock_credits = 1;
+ } else
+ server->oplocks = false;
+
server->echo_credits = 1;
- server->oplock_credits = 1;
}
server->credits -= server->echo_credits + server->oplock_credits;
return 0;
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index 070fb2a..ce83e2e 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -46,6 +46,7 @@
#include "smb2status.h"
#include "smb2glob.h"
#include "cifspdu.h"
+#include "cifs_spnego.h"
/*
* The following table defines the expected "StructureSize" of SMB2 requests
@@ -486,19 +487,15 @@
cifs_dbg(FYI, "missing security blob on negprot\n");
rc = cifs_enable_signing(server, ses->sign);
-#ifdef CONFIG_SMB2_ASN1 /* BB REMOVEME when updated asn1.c ready */
if (rc)
goto neg_exit;
- if (blob_length)
+ if (blob_length) {
rc = decode_negTokenInit(security_blob, blob_length, server);
- if (rc == 1)
- rc = 0;
- else if (rc == 0) {
- rc = -EIO;
- goto neg_exit;
+ if (rc == 1)
+ rc = 0;
+ else if (rc == 0)
+ rc = -EIO;
}
-#endif
-
neg_exit:
free_rsp_buf(resp_buftype, rsp);
return rc;
@@ -592,7 +589,8 @@
__le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
struct TCP_Server_Info *server = ses->server;
u16 blob_length = 0;
- char *security_blob;
+ struct key *spnego_key = NULL;
+ char *security_blob = NULL;
char *ntlmssp_blob = NULL;
bool use_spnego = false; /* else use raw ntlmssp */
@@ -620,7 +618,8 @@
ses->ntlmssp->sesskey_per_smbsess = true;
/* FIXME: allow for other auth types besides NTLMSSP (e.g. krb5) */
- ses->sectype = RawNTLMSSP;
+ if (ses->sectype != Kerberos && ses->sectype != RawNTLMSSP)
+ ses->sectype = RawNTLMSSP;
ssetup_ntlmssp_authenticate:
if (phase == NtLmChallenge)
@@ -649,7 +648,48 @@
iov[0].iov_base = (char *)req;
/* 4 for rfc1002 length field and 1 for pad */
iov[0].iov_len = get_rfc1002_length(req) + 4 - 1;
- if (phase == NtLmNegotiate) {
+
+ if (ses->sectype == Kerberos) {
+#ifdef CONFIG_CIFS_UPCALL
+ struct cifs_spnego_msg *msg;
+
+ spnego_key = cifs_get_spnego_key(ses);
+ if (IS_ERR(spnego_key)) {
+ rc = PTR_ERR(spnego_key);
+ spnego_key = NULL;
+ goto ssetup_exit;
+ }
+
+ msg = spnego_key->payload.data;
+ /*
+ * check version field to make sure that cifs.upcall is
+ * sending us a response in an expected form
+ */
+ if (msg->version != CIFS_SPNEGO_UPCALL_VERSION) {
+ cifs_dbg(VFS,
+ "bad cifs.upcall version. Expected %d got %d",
+ CIFS_SPNEGO_UPCALL_VERSION, msg->version);
+ rc = -EKEYREJECTED;
+ goto ssetup_exit;
+ }
+ ses->auth_key.response = kmemdup(msg->data, msg->sesskey_len,
+ GFP_KERNEL);
+ if (!ses->auth_key.response) {
+ cifs_dbg(VFS,
+ "Kerberos can't allocate (%u bytes) memory",
+ msg->sesskey_len);
+ rc = -ENOMEM;
+ goto ssetup_exit;
+ }
+ ses->auth_key.len = msg->sesskey_len;
+ blob_length = msg->secblob_len;
+ iov[1].iov_base = msg->data + msg->sesskey_len;
+ iov[1].iov_len = blob_length;
+#else
+ rc = -EOPNOTSUPP;
+ goto ssetup_exit;
+#endif /* CONFIG_CIFS_UPCALL */
+ } else if (phase == NtLmNegotiate) { /* if not krb5 must be ntlmssp */
ntlmssp_blob = kmalloc(sizeof(struct _NEGOTIATE_MESSAGE),
GFP_KERNEL);
if (ntlmssp_blob == NULL) {
@@ -672,6 +712,8 @@
/* with raw NTLMSSP we don't encapsulate in SPNEGO */
security_blob = ntlmssp_blob;
}
+ iov[1].iov_base = security_blob;
+ iov[1].iov_len = blob_length;
} else if (phase == NtLmAuthenticate) {
req->hdr.SessionId = ses->Suid;
ntlmssp_blob = kzalloc(sizeof(struct _NEGOTIATE_MESSAGE) + 500,
@@ -699,6 +741,8 @@
} else {
security_blob = ntlmssp_blob;
}
+ iov[1].iov_base = security_blob;
+ iov[1].iov_len = blob_length;
} else {
cifs_dbg(VFS, "illegal ntlmssp phase\n");
rc = -EIO;
@@ -710,8 +754,6 @@
cpu_to_le16(sizeof(struct smb2_sess_setup_req) -
1 /* pad */ - 4 /* rfc1001 len */);
req->SecurityBufferLength = cpu_to_le16(blob_length);
- iov[1].iov_base = security_blob;
- iov[1].iov_len = blob_length;
inc_rfc1001_len(req, blob_length - 1 /* pad */);
@@ -722,6 +764,7 @@
kfree(security_blob);
rsp = (struct smb2_sess_setup_rsp *)iov[0].iov_base;
+ ses->Suid = rsp->hdr.SessionId;
if (resp_buftype != CIFS_NO_BUFFER &&
rsp->hdr.Status == STATUS_MORE_PROCESSING_REQUIRED) {
if (phase != NtLmNegotiate) {
@@ -739,7 +782,6 @@
/* NTLMSSP Negotiate sent now processing challenge (response) */
phase = NtLmChallenge; /* process ntlmssp challenge */
rc = 0; /* MORE_PROCESSING is not an error here but expected */
- ses->Suid = rsp->hdr.SessionId;
rc = decode_ntlmssp_challenge(rsp->Buffer,
le16_to_cpu(rsp->SecurityBufferLength), ses);
}
@@ -796,6 +838,10 @@
kfree(ses->auth_key.response);
ses->auth_key.response = NULL;
}
+ if (spnego_key) {
+ key_invalidate(spnego_key);
+ key_put(spnego_key);
+ }
kfree(ses->ntlmssp);
return rc;
@@ -876,6 +922,12 @@
if (tcon && tcon->bad_network_name)
return -ENOENT;
+ if ((tcon->seal) &&
+ ((ses->server->capabilities & SMB2_GLOBAL_CAP_ENCRYPTION) == 0)) {
+ cifs_dbg(VFS, "encryption requested but no server support");
+ return -EOPNOTSUPP;
+ }
+
unc_path = kmalloc(MAX_SHARENAME_LENGTH * 2, GFP_KERNEL);
if (unc_path == NULL)
return -ENOMEM;
@@ -955,6 +1007,8 @@
((tcon->share_flags & SHI1005_FLAGS_DFS) == 0))
cifs_dbg(VFS, "DFS capability contradicts DFS flag\n");
init_copy_chunk_defaults(tcon);
+ if (tcon->share_flags & SHI1005_FLAGS_ENCRYPT_DATA)
+ cifs_dbg(VFS, "Encrypted shares not supported");
if (tcon->ses->server->ops->validate_negotiate)
rc = tcon->ses->server->ops->validate_negotiate(xid, tcon);
tcon_exit:
diff --git a/fs/dax.c b/fs/dax.c
index 7ae6df7..bcfb14b 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -569,8 +569,20 @@
if (!buffer_size_valid(&bh) || bh.b_size < PMD_SIZE)
goto fallback;
+ sector = bh.b_blocknr << (blkbits - 9);
+
if (buffer_unwritten(&bh) || buffer_new(&bh)) {
int i;
+
+ length = bdev_direct_access(bh.b_bdev, sector, &kaddr, &pfn,
+ bh.b_size);
+ if (length < 0) {
+ result = VM_FAULT_SIGBUS;
+ goto out;
+ }
+ if ((length < PMD_SIZE) || (pfn & PG_PMD_COLOUR))
+ goto fallback;
+
for (i = 0; i < PTRS_PER_PMD; i++)
clear_pmem(kaddr + i * PAGE_SIZE, PAGE_SIZE);
wmb_pmem();
@@ -623,7 +635,6 @@
result = VM_FAULT_NOPAGE;
spin_unlock(ptl);
} else {
- sector = bh.b_blocknr << (blkbits - 9);
length = bdev_direct_access(bh.b_bdev, sector, &kaddr, &pfn,
bh.b_size);
if (length < 0) {
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index 96f3448..fd65b3f 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -652,11 +652,8 @@
{
int err;
- mutex_lock(&inode->i_mutex);
err = security_inode_init_security(inode, dentry, qstr,
&init_xattrs, 0);
- mutex_unlock(&inode->i_mutex);
-
if (err) {
struct ubifs_info *c = dentry->i_sb->s_fs_info;
ubifs_err(c, "cannot initialize security for inode %lu, error %d",
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 7235c48..43856d1 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -217,6 +217,7 @@
int acpi_pci_irq_enable (struct pci_dev *dev);
void acpi_penalize_isa_irq(int irq, int active);
+bool acpi_isa_irq_available(int irq);
void acpi_penalize_sci_irq(int irq, int trigger, int polarity);
void acpi_pci_irq_disable (struct pci_dev *dev);
diff --git a/include/linux/iova.h b/include/linux/iova.h
index 3920a19..92f7177 100644
--- a/include/linux/iova.h
+++ b/include/linux/iova.h
@@ -68,8 +68,8 @@
return iova >> iova_shift(iovad);
}
-int iommu_iova_cache_init(void);
-void iommu_iova_cache_destroy(void);
+int iova_cache_get(void);
+void iova_cache_put(void);
struct iova *alloc_iova_mem(void);
void free_iova_mem(struct iova *iova);
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index ad800e6..6452ff4 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -242,7 +242,6 @@
* percpu counter.
*/
struct mem_cgroup_stat_cpu __percpu *stat;
- spinlock_t pcp_counter_lock;
#if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_INET)
struct cg_proto tcp_mem;
diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index 41e9f3b..2a0b956 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -402,17 +402,6 @@
u8 rsvd[8];
};
-struct mlx5_cmd_query_special_contexts_mbox_in {
- struct mlx5_inbox_hdr hdr;
- u8 rsvd[8];
-};
-
-struct mlx5_cmd_query_special_contexts_mbox_out {
- struct mlx5_outbox_hdr hdr;
- __be32 dump_fill_mkey;
- __be32 resd_lkey;
-};
-
struct mlx5_cmd_layout {
u8 type;
u8 rsvd0[3];
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 27b53f9..8b6d6f2 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -845,7 +845,6 @@
int mlx5_register_interface(struct mlx5_interface *intf);
void mlx5_unregister_interface(struct mlx5_interface *intf);
int mlx5_core_query_vendor_id(struct mlx5_core_dev *mdev, u32 *vendor_id);
-int mlx5_core_query_special_context(struct mlx5_core_dev *dev, u32 *rsvd_lkey);
struct mlx5_profile {
u64 mask;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 91c08f6..80001de 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -905,6 +905,27 @@
#endif
}
+#ifdef CONFIG_MEMCG
+static inline struct mem_cgroup *page_memcg(struct page *page)
+{
+ return page->mem_cgroup;
+}
+
+static inline void set_page_memcg(struct page *page, struct mem_cgroup *memcg)
+{
+ page->mem_cgroup = memcg;
+}
+#else
+static inline struct mem_cgroup *page_memcg(struct page *page)
+{
+ return NULL;
+}
+
+static inline void set_page_memcg(struct page *page, struct mem_cgroup *memcg)
+{
+}
+#endif
+
/*
* Some inline functions in vmstat.h depend on page_zone()
*/
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index ff47651..581abf8 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -230,12 +230,11 @@
struct rcu_synchronize *rs_array);
#define _wait_rcu_gp(checktiny, ...) \
-do { \
- call_rcu_func_t __crcu_array[] = { __VA_ARGS__ }; \
- const int __n = ARRAY_SIZE(__crcu_array); \
- struct rcu_synchronize __rs_array[__n]; \
- \
- __wait_rcu_gp(checktiny, __n, __crcu_array, __rs_array); \
+do { \
+ call_rcu_func_t __crcu_array[] = { __VA_ARGS__ }; \
+ struct rcu_synchronize __rs_array[ARRAY_SIZE(__crcu_array)]; \
+ __wait_rcu_gp(checktiny, ARRAY_SIZE(__crcu_array), \
+ __crcu_array, __rs_array); \
} while (0)
#define wait_rcu_gp(...) _wait_rcu_gp(false, __VA_ARGS__)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 2b0a30a..4398411 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2708,7 +2708,7 @@
if (skb->ip_summed == CHECKSUM_COMPLETE)
skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0));
else if (skb->ip_summed == CHECKSUM_PARTIAL &&
- skb_checksum_start_offset(skb) <= len)
+ skb_checksum_start_offset(skb) < 0)
skb->ip_summed = CHECKSUM_NONE;
}
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 4a167b3..cb1b9bb 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -63,7 +63,11 @@
#define UNIX_GC_MAYBE_CYCLE 1
struct socket_wq peer_wq;
};
-#define unix_sk(__sk) ((struct unix_sock *)__sk)
+
+static inline struct unix_sock *unix_sk(struct sock *sk)
+{
+ return (struct unix_sock *)sk;
+}
#define peer_wait peer_wq.wait
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index ac9bf1c..5f48754 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -730,6 +730,7 @@
#define DF_EMULATED_VPD_UNIT_SERIAL 0x00000004
#define DF_USING_UDEV_PATH 0x00000008
#define DF_USING_ALIAS 0x00000010
+#define DF_READ_ONLY 0x00000020
/* Physical device queue depth */
u32 queue_depth;
/* Used for SPC-2 reservations enforce of ISIDs */
diff --git a/include/uapi/linux/userfaultfd.h b/include/uapi/linux/userfaultfd.h
index df0e09b..9057d7a 100644
--- a/include/uapi/linux/userfaultfd.h
+++ b/include/uapi/linux/userfaultfd.h
@@ -11,8 +11,6 @@
#include <linux/types.h>
-#include <linux/compiler.h>
-
#define UFFD_API ((__u64)0xAA)
/*
* After implementing the respective features it will become:
diff --git a/ipc/msg.c b/ipc/msg.c
index 66c4f56..1471db9 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -137,13 +137,6 @@
return retval;
}
- /* ipc_addid() locks msq upon success. */
- id = ipc_addid(&msg_ids(ns), &msq->q_perm, ns->msg_ctlmni);
- if (id < 0) {
- ipc_rcu_putref(msq, msg_rcu_free);
- return id;
- }
-
msq->q_stime = msq->q_rtime = 0;
msq->q_ctime = get_seconds();
msq->q_cbytes = msq->q_qnum = 0;
@@ -153,6 +146,13 @@
INIT_LIST_HEAD(&msq->q_receivers);
INIT_LIST_HEAD(&msq->q_senders);
+ /* ipc_addid() locks msq upon success. */
+ id = ipc_addid(&msg_ids(ns), &msq->q_perm, ns->msg_ctlmni);
+ if (id < 0) {
+ ipc_rcu_putref(msq, msg_rcu_free);
+ return id;
+ }
+
ipc_unlock_object(&msq->q_perm);
rcu_read_unlock();
diff --git a/ipc/shm.c b/ipc/shm.c
index 222131e..4178727 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -551,12 +551,6 @@
if (IS_ERR(file))
goto no_file;
- id = ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni);
- if (id < 0) {
- error = id;
- goto no_id;
- }
-
shp->shm_cprid = task_tgid_vnr(current);
shp->shm_lprid = 0;
shp->shm_atim = shp->shm_dtim = 0;
@@ -565,6 +559,13 @@
shp->shm_nattch = 0;
shp->shm_file = file;
shp->shm_creator = current;
+
+ id = ipc_addid(&shm_ids(ns), &shp->shm_perm, ns->shm_ctlmni);
+ if (id < 0) {
+ error = id;
+ goto no_id;
+ }
+
list_add(&shp->shm_clist, ¤t->sysvshm.shm_clist);
/*
diff --git a/ipc/util.c b/ipc/util.c
index be42300..0f401d9 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -237,6 +237,10 @@
rcu_read_lock();
spin_lock(&new->lock);
+ current_euid_egid(&euid, &egid);
+ new->cuid = new->uid = euid;
+ new->gid = new->cgid = egid;
+
id = idr_alloc(&ids->ipcs_idr, new,
(next_id < 0) ? 0 : ipcid_to_idx(next_id), 0,
GFP_NOWAIT);
@@ -249,10 +253,6 @@
ids->in_use++;
- current_euid_egid(&euid, &egid);
- new->cuid = new->uid = euid;
- new->gid = new->cgid = egid;
-
if (next_id < 0) {
new->seq = ids->seq++;
if (ids->seq > IPCID_SEQ_MAX)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index f548f69..b11756f 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -1243,11 +1243,7 @@
PERF_EVENT_STATE_INACTIVE;
}
-/*
- * Called at perf_event creation and when events are attached/detached from a
- * group.
- */
-static void perf_event__read_size(struct perf_event *event)
+static void __perf_event_read_size(struct perf_event *event, int nr_siblings)
{
int entry = sizeof(u64); /* value */
int size = 0;
@@ -1263,7 +1259,7 @@
entry += sizeof(u64);
if (event->attr.read_format & PERF_FORMAT_GROUP) {
- nr += event->group_leader->nr_siblings;
+ nr += nr_siblings;
size += sizeof(u64);
}
@@ -1271,14 +1267,11 @@
event->read_size = size;
}
-static void perf_event__header_size(struct perf_event *event)
+static void __perf_event_header_size(struct perf_event *event, u64 sample_type)
{
struct perf_sample_data *data;
- u64 sample_type = event->attr.sample_type;
u16 size = 0;
- perf_event__read_size(event);
-
if (sample_type & PERF_SAMPLE_IP)
size += sizeof(data->ip);
@@ -1303,6 +1296,17 @@
event->header_size = size;
}
+/*
+ * Called at perf_event creation and when events are attached/detached from a
+ * group.
+ */
+static void perf_event__header_size(struct perf_event *event)
+{
+ __perf_event_read_size(event,
+ event->group_leader->nr_siblings);
+ __perf_event_header_size(event, event->attr.sample_type);
+}
+
static void perf_event__id_header_size(struct perf_event *event)
{
struct perf_sample_data *data;
@@ -1330,6 +1334,27 @@
event->id_header_size = size;
}
+static bool perf_event_validate_size(struct perf_event *event)
+{
+ /*
+ * The values computed here will be over-written when we actually
+ * attach the event.
+ */
+ __perf_event_read_size(event, event->group_leader->nr_siblings + 1);
+ __perf_event_header_size(event, event->attr.sample_type & ~PERF_SAMPLE_READ);
+ perf_event__id_header_size(event);
+
+ /*
+ * Sum the lot; should not exceed the 64k limit we have on records.
+ * Conservative limit to allow for callchains and other variable fields.
+ */
+ if (event->read_size + event->header_size +
+ event->id_header_size + sizeof(struct perf_event_header) >= 16*1024)
+ return false;
+
+ return true;
+}
+
static void perf_group_attach(struct perf_event *event)
{
struct perf_event *group_leader = event->group_leader, *pos;
@@ -8297,13 +8322,35 @@
if (move_group) {
gctx = group_leader->ctx;
+ mutex_lock_double(&gctx->mutex, &ctx->mutex);
+ } else {
+ mutex_lock(&ctx->mutex);
+ }
+ if (!perf_event_validate_size(event)) {
+ err = -E2BIG;
+ goto err_locked;
+ }
+
+ /*
+ * Must be under the same ctx::mutex as perf_install_in_context(),
+ * because we need to serialize with concurrent event creation.
+ */
+ if (!exclusive_event_installable(event, ctx)) {
+ /* exclusive and group stuff are assumed mutually exclusive */
+ WARN_ON_ONCE(move_group);
+
+ err = -EBUSY;
+ goto err_locked;
+ }
+
+ WARN_ON_ONCE(ctx->parent_ctx);
+
+ if (move_group) {
/*
* See perf_event_ctx_lock() for comments on the details
* of swizzling perf_event::ctx.
*/
- mutex_lock_double(&gctx->mutex, &ctx->mutex);
-
perf_remove_from_context(group_leader, false);
list_for_each_entry(sibling, &group_leader->sibling_list,
@@ -8311,13 +8358,7 @@
perf_remove_from_context(sibling, false);
put_ctx(gctx);
}
- } else {
- mutex_lock(&ctx->mutex);
- }
- WARN_ON_ONCE(ctx->parent_ctx);
-
- if (move_group) {
/*
* Wait for everybody to stop referencing the events through
* the old lists, before installing it on new lists.
@@ -8349,22 +8390,29 @@
perf_event__state_init(group_leader);
perf_install_in_context(ctx, group_leader, group_leader->cpu);
get_ctx(ctx);
+
+ /*
+ * Now that all events are installed in @ctx, nothing
+ * references @gctx anymore, so drop the last reference we have
+ * on it.
+ */
+ put_ctx(gctx);
}
- if (!exclusive_event_installable(event, ctx)) {
- err = -EBUSY;
- mutex_unlock(&ctx->mutex);
- fput(event_file);
- goto err_context;
- }
+ /*
+ * Precalculate sample_data sizes; do while holding ctx::mutex such
+ * that we're serialized against further additions and before
+ * perf_install_in_context() which is the point the event is active and
+ * can use these values.
+ */
+ perf_event__header_size(event);
+ perf_event__id_header_size(event);
perf_install_in_context(ctx, event, event->cpu);
perf_unpin_context(ctx);
- if (move_group) {
+ if (move_group)
mutex_unlock(&gctx->mutex);
- put_ctx(gctx);
- }
mutex_unlock(&ctx->mutex);
put_online_cpus();
@@ -8376,12 +8424,6 @@
mutex_unlock(¤t->perf_event_mutex);
/*
- * Precalculate sample_data sizes
- */
- perf_event__header_size(event);
- perf_event__id_header_size(event);
-
- /*
* Drop the reference on the group_event after placing the
* new event on the sibling_list. This ensures destruction
* of the group leader will find the pointer to itself in
@@ -8391,6 +8433,12 @@
fd_install(event_fd, event_file);
return event_fd;
+err_locked:
+ if (move_group)
+ mutex_unlock(&gctx->mutex);
+ mutex_unlock(&ctx->mutex);
+/* err_file: */
+ fput(event_file);
err_context:
perf_unpin_context(ctx);
put_ctx(ctx);
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 8acfbf7..4e49cc4 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3068,7 +3068,7 @@
static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
int trylock, int read, int check, int hardirqs_off,
struct lockdep_map *nest_lock, unsigned long ip,
- int references)
+ int references, int pin_count)
{
struct task_struct *curr = current;
struct lock_class *class = NULL;
@@ -3157,7 +3157,7 @@
hlock->waittime_stamp = 0;
hlock->holdtime_stamp = lockstat_clock();
#endif
- hlock->pin_count = 0;
+ hlock->pin_count = pin_count;
if (check && !mark_irqflags(curr, hlock))
return 0;
@@ -3343,7 +3343,7 @@
hlock_class(hlock)->subclass, hlock->trylock,
hlock->read, hlock->check, hlock->hardirqs_off,
hlock->nest_lock, hlock->acquire_ip,
- hlock->references))
+ hlock->references, hlock->pin_count))
return 0;
}
@@ -3433,7 +3433,7 @@
hlock_class(hlock)->subclass, hlock->trylock,
hlock->read, hlock->check, hlock->hardirqs_off,
hlock->nest_lock, hlock->acquire_ip,
- hlock->references))
+ hlock->references, hlock->pin_count))
return 0;
}
@@ -3583,7 +3583,7 @@
current->lockdep_recursion = 1;
trace_lock_acquire(lock, subclass, trylock, read, check, nest_lock, ip);
__lock_acquire(lock, subclass, trylock, read, check,
- irqs_disabled_flags(flags), nest_lock, ip, 0);
+ irqs_disabled_flags(flags), nest_lock, ip, 0, 0);
current->lockdep_recursion = 0;
raw_local_irq_restore(flags);
}
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 9f75f25..775d36c 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -3868,6 +3868,7 @@
static void __init
rcu_boot_init_percpu_data(int cpu, struct rcu_state *rsp)
{
+ static struct lock_class_key rcu_exp_sched_rdp_class;
unsigned long flags;
struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
struct rcu_node *rnp = rcu_get_root(rsp);
@@ -3883,6 +3884,10 @@
mutex_init(&rdp->exp_funnel_mutex);
rcu_boot_init_nocb_percpu_data(rdp);
raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ if (rsp == &rcu_sched_state)
+ lockdep_set_class_and_name(&rdp->exp_funnel_mutex,
+ &rcu_exp_sched_rdp_class,
+ "rcu_data_exp_sched");
}
/*
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 2f9c928..6159531 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -4934,7 +4934,15 @@
idle->state = TASK_RUNNING;
idle->se.exec_start = sched_clock();
- do_set_cpus_allowed(idle, cpumask_of(cpu));
+#ifdef CONFIG_SMP
+ /*
+ * Its possible that init_idle() gets called multiple times on a task,
+ * in that case do_set_cpus_allowed() will not do the right thing.
+ *
+ * And since this is boot we can forgo the serialization.
+ */
+ set_cpus_allowed_common(idle, cpumask_of(cpu));
+#endif
/*
* We're having a chicken and egg problem, even though we are
* holding rq->lock, the cpu isn't yet set to this cpu so the
@@ -4951,7 +4959,7 @@
rq->curr = rq->idle = idle;
idle->on_rq = TASK_ON_RQ_QUEUED;
-#if defined(CONFIG_SMP)
+#ifdef CONFIG_SMP
idle->on_cpu = 1;
#endif
raw_spin_unlock(&rq->lock);
@@ -4966,7 +4974,7 @@
idle->sched_class = &idle_sched_class;
ftrace_graph_init_idle_task(idle, cpu);
vtime_init_idle(idle, cpu);
-#if defined(CONFIG_SMP)
+#ifdef CONFIG_SMP
sprintf(idle->comm, "%s/%d", INIT_TASK_COMM, cpu);
#endif
}
diff --git a/mm/dmapool.c b/mm/dmapool.c
index 71a8998..312a716 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -394,7 +394,7 @@
list_for_each_entry(page, &pool->page_list, page_list) {
if (dma < page->dma)
continue;
- if (dma < (page->dma + pool->allocation))
+ if ((dma - page->dma) < pool->allocation)
return page;
}
return NULL;
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 999fb0a..9cc7734 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3202,6 +3202,14 @@
continue;
/*
+ * Shared VMAs have their own reserves and do not affect
+ * MAP_PRIVATE accounting but it is possible that a shared
+ * VMA is using the same page so check and skip such VMAs.
+ */
+ if (iter_vma->vm_flags & VM_MAYSHARE)
+ continue;
+
+ /*
* Unmap the page from other VMAs without their own reserves.
* They get marked to be SIGKILLed if they fault in these
* areas. This is because a future no-page fault on this VMA
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 6ddaeba..1fedbde 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -644,12 +644,14 @@
}
/*
+ * Return page count for single (non recursive) @memcg.
+ *
* Implementation Note: reading percpu statistics for memcg.
*
* Both of vmstat[] and percpu_counter has threshold and do periodic
* synchronization to implement "quick" read. There are trade-off between
* reading cost and precision of value. Then, we may have a chance to implement
- * a periodic synchronizion of counter in memcg's counter.
+ * a periodic synchronization of counter in memcg's counter.
*
* But this _read() function is used for user interface now. The user accounts
* memory usage by memory cgroup and he _always_ requires exact value because
@@ -659,17 +661,24 @@
*
* If there are kernel internal actions which can make use of some not-exact
* value, and reading all cpu value can be performance bottleneck in some
- * common workload, threashold and synchonization as vmstat[] should be
+ * common workload, threshold and synchronization as vmstat[] should be
* implemented.
*/
-static long mem_cgroup_read_stat(struct mem_cgroup *memcg,
- enum mem_cgroup_stat_index idx)
+static unsigned long
+mem_cgroup_read_stat(struct mem_cgroup *memcg, enum mem_cgroup_stat_index idx)
{
long val = 0;
int cpu;
+ /* Per-cpu values can be negative, use a signed accumulator */
for_each_possible_cpu(cpu)
val += per_cpu(memcg->stat->count[idx], cpu);
+ /*
+ * Summing races with updates, so val may be negative. Avoid exposing
+ * transient negative values.
+ */
+ if (val < 0)
+ val = 0;
return val;
}
@@ -1254,7 +1263,7 @@
for (i = 0; i < MEM_CGROUP_STAT_NSTATS; i++) {
if (i == MEM_CGROUP_STAT_SWAP && !do_swap_account)
continue;
- pr_cont(" %s:%ldKB", mem_cgroup_stat_names[i],
+ pr_cont(" %s:%luKB", mem_cgroup_stat_names[i],
K(mem_cgroup_read_stat(iter, i)));
}
@@ -2819,14 +2828,11 @@
enum mem_cgroup_stat_index idx)
{
struct mem_cgroup *iter;
- long val = 0;
+ unsigned long val = 0;
- /* Per-cpu values can be negative, use a signed accumulator */
for_each_mem_cgroup_tree(iter, memcg)
val += mem_cgroup_read_stat(iter, idx);
- if (val < 0) /* race ? */
- val = 0;
return val;
}
@@ -3169,7 +3175,7 @@
for (i = 0; i < MEM_CGROUP_STAT_NSTATS; i++) {
if (i == MEM_CGROUP_STAT_SWAP && !do_swap_account)
continue;
- seq_printf(m, "%s %ld\n", mem_cgroup_stat_names[i],
+ seq_printf(m, "%s %lu\n", mem_cgroup_stat_names[i],
mem_cgroup_read_stat(memcg, i) * PAGE_SIZE);
}
@@ -3194,13 +3200,13 @@
(u64)memsw * PAGE_SIZE);
for (i = 0; i < MEM_CGROUP_STAT_NSTATS; i++) {
- long long val = 0;
+ unsigned long long val = 0;
if (i == MEM_CGROUP_STAT_SWAP && !do_swap_account)
continue;
for_each_mem_cgroup_tree(mi, memcg)
val += mem_cgroup_read_stat(mi, i) * PAGE_SIZE;
- seq_printf(m, "total_%s %lld\n", mem_cgroup_stat_names[i], val);
+ seq_printf(m, "total_%s %llu\n", mem_cgroup_stat_names[i], val);
}
for (i = 0; i < MEM_CGROUP_EVENTS_NSTATS; i++) {
@@ -4179,7 +4185,6 @@
if (memcg_wb_domain_init(memcg, GFP_KERNEL))
goto out_free_stat;
- spin_lock_init(&memcg->pcp_counter_lock);
return memcg;
out_free_stat:
diff --git a/mm/migrate.c b/mm/migrate.c
index 7452a00..842ecd7 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -740,6 +740,15 @@
if (PageSwapBacked(page))
SetPageSwapBacked(newpage);
+ /*
+ * Indirectly called below, migrate_page_copy() copies PG_dirty and thus
+ * needs newpage's memcg set to transfer memcg dirty page accounting.
+ * So perform memcg migration in two steps:
+ * 1. set newpage->mem_cgroup (here)
+ * 2. clear page->mem_cgroup (below)
+ */
+ set_page_memcg(newpage, page_memcg(page));
+
mapping = page_mapping(page);
if (!mapping)
rc = migrate_page(mapping, newpage, page, mode);
@@ -756,9 +765,10 @@
rc = fallback_migrate_page(mapping, newpage, page, mode);
if (rc != MIGRATEPAGE_SUCCESS) {
+ set_page_memcg(newpage, NULL);
newpage->mapping = NULL;
} else {
- mem_cgroup_migrate(page, newpage, false);
+ set_page_memcg(page, NULL);
if (page_was_mapped)
remove_migration_ptes(page, newpage);
page->mapping = NULL;
diff --git a/mm/slab.c b/mm/slab.c
index c77ebe6..4fcc5dd 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -2190,9 +2190,16 @@
size += BYTES_PER_WORD;
}
#if FORCED_DEBUG && defined(CONFIG_DEBUG_PAGEALLOC)
- if (size >= kmalloc_size(INDEX_NODE + 1)
- && cachep->object_size > cache_line_size()
- && ALIGN(size, cachep->align) < PAGE_SIZE) {
+ /*
+ * To activate debug pagealloc, off-slab management is necessary
+ * requirement. In early phase of initialization, small sized slab
+ * doesn't get initialized so it would not be possible. So, we need
+ * to check size >= 256. It guarantees that all necessary small
+ * sized slab is initialized in current slab initialization sequence.
+ */
+ if (!slab_early_init && size >= kmalloc_size(INDEX_NODE) &&
+ size >= 256 && cachep->object_size > cache_line_size() &&
+ ALIGN(size, cachep->align) < PAGE_SIZE) {
cachep->obj_offset += PAGE_SIZE - ALIGN(size, cachep->align);
size = PAGE_SIZE;
}
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index b4c5300..410c6e4 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -31,7 +31,6 @@
static const char fmt_hex[] = "%#x\n";
static const char fmt_long_hex[] = "%#lx\n";
static const char fmt_dec[] = "%d\n";
-static const char fmt_udec[] = "%u\n";
static const char fmt_ulong[] = "%lu\n";
static const char fmt_u64[] = "%llu\n";
@@ -202,7 +201,7 @@
if (netif_running(netdev)) {
struct ethtool_cmd cmd;
if (!__ethtool_get_settings(netdev, &cmd))
- ret = sprintf(buf, fmt_udec, ethtool_cmd_speed(&cmd));
+ ret = sprintf(buf, fmt_dec, ethtool_cmd_speed(&cmd));
}
rtnl_unlock();
return ret;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index dad4dd3..fab4599 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2958,11 +2958,12 @@
*/
unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len)
{
+ unsigned char *data = skb->data;
+
BUG_ON(len > skb->len);
- skb->len -= len;
- BUG_ON(skb->len < skb->data_len);
- skb_postpull_rcsum(skb, skb->data, len);
- return skb->data += len;
+ __skb_pull(skb, len);
+ skb_postpull_rcsum(skb, data, len);
+ return skb->data;
}
EXPORT_SYMBOL_GPL(skb_pull_rcsum);
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index fac1723..d7c2bb0 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -340,6 +340,7 @@
fl4.flowi4_tos = tos;
fl4.flowi4_scope = RT_SCOPE_UNIVERSE;
fl4.flowi4_tun_key.tun_id = 0;
+ fl4.flowi4_flags = 0;
no_addr = idev->ifa_list == NULL;
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 1441de1..76ca4e7 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1743,6 +1743,7 @@
fl4.flowi4_mark = skb->mark;
fl4.flowi4_tos = tos;
fl4.flowi4_scope = RT_SCOPE_UNIVERSE;
+ fl4.flowi4_flags = 0;
fl4.daddr = daddr;
fl4.saddr = saddr;
err = fib_lookup(net, &fl4, &res, 0);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 66a6b2c..d3d9467 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1169,7 +1169,8 @@
fl6->flowi6_iif = LOOPBACK_IFINDEX;
- if ((sk && sk->sk_bound_dev_if) || rt6_need_strict(&fl6->daddr))
+ if ((sk && sk->sk_bound_dev_if) || rt6_need_strict(&fl6->daddr) ||
+ fl6->flowi6_oif)
flags |= RT6_LOOKUP_F_IFACE;
if (!ipv6_addr_any(&fl6->saddr))
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index f6b090d..afca2eb 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1319,7 +1319,7 @@
tunnel = container_of(work, struct l2tp_tunnel, del_work);
sk = l2tp_tunnel_sock_lookup(tunnel);
if (!sk)
- return;
+ goto out;
sock = sk->sk_socket;
@@ -1341,6 +1341,8 @@
}
l2tp_tunnel_sock_put(sk);
+out:
+ l2tp_tunnel_dec_refcount(tunnel);
}
/* Create a socket for the tunnel, if one isn't set up by
@@ -1636,8 +1638,13 @@
*/
int l2tp_tunnel_delete(struct l2tp_tunnel *tunnel)
{
+ l2tp_tunnel_inc_refcount(tunnel);
l2tp_tunnel_closeall(tunnel);
- return (false == queue_work(l2tp_wq, &tunnel->del_work));
+ if (false == queue_work(l2tp_wq, &tunnel->del_work)) {
+ l2tp_tunnel_dec_refcount(tunnel);
+ return 1;
+ }
+ return 0;
}
EXPORT_SYMBOL_GPL(l2tp_tunnel_delete);
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 197c3f5..b00f1f9 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1208,20 +1208,22 @@
* within this document.
*
* Our basic strategy is to round-robin transports in priorities
- * according to sctp_state_prio_map[] e.g., if no such
+ * according to sctp_trans_score() e.g., if no such
* transport with state SCTP_ACTIVE exists, round-robin through
* SCTP_UNKNOWN, etc. You get the picture.
*/
-static const u8 sctp_trans_state_to_prio_map[] = {
- [SCTP_ACTIVE] = 3, /* best case */
- [SCTP_UNKNOWN] = 2,
- [SCTP_PF] = 1,
- [SCTP_INACTIVE] = 0, /* worst case */
-};
-
static u8 sctp_trans_score(const struct sctp_transport *trans)
{
- return sctp_trans_state_to_prio_map[trans->state];
+ switch (trans->state) {
+ case SCTP_ACTIVE:
+ return 3; /* best case */
+ case SCTP_UNKNOWN:
+ return 2;
+ case SCTP_PF:
+ return 1;
+ default: /* case SCTP_INACTIVE */
+ return 0; /* worst case */
+ }
}
static struct sctp_transport *sctp_trans_elect_tie(struct sctp_transport *trans1,
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 35df126..6098d4c 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -244,12 +244,13 @@
int error;
struct sctp_transport *transport = (struct sctp_transport *) peer;
struct sctp_association *asoc = transport->asoc;
- struct net *net = sock_net(asoc->base.sk);
+ struct sock *sk = asoc->base.sk;
+ struct net *net = sock_net(sk);
/* Check whether a task is in the sock. */
- bh_lock_sock(asoc->base.sk);
- if (sock_owned_by_user(asoc->base.sk)) {
+ bh_lock_sock(sk);
+ if (sock_owned_by_user(sk)) {
pr_debug("%s: sock is busy\n", __func__);
/* Try again later. */
@@ -272,10 +273,10 @@
transport, GFP_ATOMIC);
if (error)
- asoc->base.sk->sk_err = -error;
+ sk->sk_err = -error;
out_unlock:
- bh_unlock_sock(asoc->base.sk);
+ bh_unlock_sock(sk);
sctp_transport_put(transport);
}
@@ -285,11 +286,12 @@
static void sctp_generate_timeout_event(struct sctp_association *asoc,
sctp_event_timeout_t timeout_type)
{
- struct net *net = sock_net(asoc->base.sk);
+ struct sock *sk = asoc->base.sk;
+ struct net *net = sock_net(sk);
int error = 0;
- bh_lock_sock(asoc->base.sk);
- if (sock_owned_by_user(asoc->base.sk)) {
+ bh_lock_sock(sk);
+ if (sock_owned_by_user(sk)) {
pr_debug("%s: sock is busy: timer %d\n", __func__,
timeout_type);
@@ -312,10 +314,10 @@
(void *)timeout_type, GFP_ATOMIC);
if (error)
- asoc->base.sk->sk_err = -error;
+ sk->sk_err = -error;
out_unlock:
- bh_unlock_sock(asoc->base.sk);
+ bh_unlock_sock(sk);
sctp_association_put(asoc);
}
@@ -365,10 +367,11 @@
int error = 0;
struct sctp_transport *transport = (struct sctp_transport *) data;
struct sctp_association *asoc = transport->asoc;
- struct net *net = sock_net(asoc->base.sk);
+ struct sock *sk = asoc->base.sk;
+ struct net *net = sock_net(sk);
- bh_lock_sock(asoc->base.sk);
- if (sock_owned_by_user(asoc->base.sk)) {
+ bh_lock_sock(sk);
+ if (sock_owned_by_user(sk)) {
pr_debug("%s: sock is busy\n", __func__);
/* Try again later. */
@@ -388,11 +391,11 @@
asoc->state, asoc->ep, asoc,
transport, GFP_ATOMIC);
- if (error)
- asoc->base.sk->sk_err = -error;
+ if (error)
+ sk->sk_err = -error;
out_unlock:
- bh_unlock_sock(asoc->base.sk);
+ bh_unlock_sock(sk);
sctp_transport_put(transport);
}
@@ -403,10 +406,11 @@
{
struct sctp_transport *transport = (struct sctp_transport *) data;
struct sctp_association *asoc = transport->asoc;
- struct net *net = sock_net(asoc->base.sk);
+ struct sock *sk = asoc->base.sk;
+ struct net *net = sock_net(sk);
- bh_lock_sock(asoc->base.sk);
- if (sock_owned_by_user(asoc->base.sk)) {
+ bh_lock_sock(sk);
+ if (sock_owned_by_user(sk)) {
pr_debug("%s: sock is busy\n", __func__);
/* Try again later. */
@@ -427,7 +431,7 @@
asoc->state, asoc->ep, asoc, transport, GFP_ATOMIC);
out_unlock:
- bh_unlock_sock(asoc->base.sk);
+ bh_unlock_sock(sk);
sctp_association_put(asoc);
}
diff --git a/net/sunrpc/xprtrdma/fmr_ops.c b/net/sunrpc/xprtrdma/fmr_ops.c
index cb25c89..f1e8daf 100644
--- a/net/sunrpc/xprtrdma/fmr_ops.c
+++ b/net/sunrpc/xprtrdma/fmr_ops.c
@@ -39,25 +39,6 @@
fmr_op_open(struct rpcrdma_ia *ia, struct rpcrdma_ep *ep,
struct rpcrdma_create_data_internal *cdata)
{
- struct ib_device_attr *devattr = &ia->ri_devattr;
- struct ib_mr *mr;
-
- /* Obtain an lkey to use for the regbufs, which are
- * protected from remote access.
- */
- if (devattr->device_cap_flags & IB_DEVICE_LOCAL_DMA_LKEY) {
- ia->ri_dma_lkey = ia->ri_device->local_dma_lkey;
- } else {
- mr = ib_get_dma_mr(ia->ri_pd, IB_ACCESS_LOCAL_WRITE);
- if (IS_ERR(mr)) {
- pr_err("%s: ib_get_dma_mr for failed with %lX\n",
- __func__, PTR_ERR(mr));
- return -ENOMEM;
- }
- ia->ri_dma_lkey = ia->ri_dma_mr->lkey;
- ia->ri_dma_mr = mr;
- }
-
return 0;
}
diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c
index d6653f5..5318951 100644
--- a/net/sunrpc/xprtrdma/frwr_ops.c
+++ b/net/sunrpc/xprtrdma/frwr_ops.c
@@ -189,11 +189,6 @@
struct ib_device_attr *devattr = &ia->ri_devattr;
int depth, delta;
- /* Obtain an lkey to use for the regbufs, which are
- * protected from remote access.
- */
- ia->ri_dma_lkey = ia->ri_device->local_dma_lkey;
-
ia->ri_max_frmr_depth =
min_t(unsigned int, RPCRDMA_MAX_DATA_SEGS,
devattr->max_fast_reg_page_list_len);
diff --git a/net/sunrpc/xprtrdma/physical_ops.c b/net/sunrpc/xprtrdma/physical_ops.c
index 72cf8b1..617b76f 100644
--- a/net/sunrpc/xprtrdma/physical_ops.c
+++ b/net/sunrpc/xprtrdma/physical_ops.c
@@ -23,7 +23,6 @@
physical_op_open(struct rpcrdma_ia *ia, struct rpcrdma_ep *ep,
struct rpcrdma_create_data_internal *cdata)
{
- struct ib_device_attr *devattr = &ia->ri_devattr;
struct ib_mr *mr;
/* Obtain an rkey to use for RPC data payloads.
@@ -37,15 +36,8 @@
__func__, PTR_ERR(mr));
return -ENOMEM;
}
+
ia->ri_dma_mr = mr;
-
- /* Obtain an lkey to use for regbufs.
- */
- if (devattr->device_cap_flags & IB_DEVICE_LOCAL_DMA_LKEY)
- ia->ri_dma_lkey = ia->ri_device->local_dma_lkey;
- else
- ia->ri_dma_lkey = ia->ri_dma_mr->lkey;
-
return 0;
}
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 6829967..eb081ad 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -1252,7 +1252,7 @@
goto out_free;
iov->length = size;
- iov->lkey = ia->ri_dma_lkey;
+ iov->lkey = ia->ri_pd->local_dma_lkey;
rb->rg_size = size;
rb->rg_owner = NULL;
return rb;
diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h
index 0251222..c09414e 100644
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -65,7 +65,6 @@
struct rdma_cm_id *ri_id;
struct ib_pd *ri_pd;
struct ib_mr *ri_dma_mr;
- u32 ri_dma_lkey;
struct completion ri_done;
int ri_async_rc;
unsigned int ri_max_frmr_depth;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 03ee4d3..ef31b40 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -2179,8 +2179,21 @@
if (UNIXCB(skb).fp)
scm.fp = scm_fp_dup(UNIXCB(skb).fp);
- sk_peek_offset_fwd(sk, chunk);
+ if (skip) {
+ sk_peek_offset_fwd(sk, chunk);
+ skip -= chunk;
+ }
+ if (UNIXCB(skb).fp)
+ break;
+
+ last = skb;
+ last_len = skb->len;
+ unix_state_lock(sk);
+ skb = skb_peek_next(skb, &sk->sk_receive_queue);
+ if (skb)
+ goto again;
+ unix_state_unlock(sk);
break;
}
} while (size);
diff --git a/samples/kprobes/jprobe_example.c b/samples/kprobes/jprobe_example.c
index 9119ac6..c285a3b 100644
--- a/samples/kprobes/jprobe_example.c
+++ b/samples/kprobes/jprobe_example.c
@@ -1,13 +1,13 @@
/*
* Here's a sample kernel module showing the use of jprobes to dump
- * the arguments of do_fork().
+ * the arguments of _do_fork().
*
* For more information on theory of operation of jprobes, see
* Documentation/kprobes.txt
*
* Build and insert the kernel module as done in the kprobe example.
* You will see the trace data in /var/log/messages and on the
- * console whenever do_fork() is invoked to create a new process.
+ * console whenever _do_fork() is invoked to create a new process.
* (Some messages may be suppressed if syslogd is configured to
* eliminate duplicate messages.)
*/
@@ -17,13 +17,13 @@
#include <linux/kprobes.h>
/*
- * Jumper probe for do_fork.
+ * Jumper probe for _do_fork.
* Mirror principle enables access to arguments of the probed routine
* from the probe handler.
*/
-/* Proxy routine having the same arguments as actual do_fork() routine */
-static long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
+/* Proxy routine having the same arguments as actual _do_fork() routine */
+static long j_do_fork(unsigned long clone_flags, unsigned long stack_start,
unsigned long stack_size, int __user *parent_tidptr,
int __user *child_tidptr)
{
@@ -36,9 +36,9 @@
}
static struct jprobe my_jprobe = {
- .entry = jdo_fork,
+ .entry = j_do_fork,
.kp = {
- .symbol_name = "do_fork",
+ .symbol_name = "_do_fork",
},
};
diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
index 366db1a..727eb21 100644
--- a/samples/kprobes/kprobe_example.c
+++ b/samples/kprobes/kprobe_example.c
@@ -1,13 +1,13 @@
/*
* NOTE: This example is works on x86 and powerpc.
* Here's a sample kernel module showing the use of kprobes to dump a
- * stack trace and selected registers when do_fork() is called.
+ * stack trace and selected registers when _do_fork() is called.
*
* For more information on theory of operation of kprobes, see
* Documentation/kprobes.txt
*
* You will see the trace data in /var/log/messages and on the console
- * whenever do_fork() is invoked to create a new process.
+ * whenever _do_fork() is invoked to create a new process.
*/
#include <linux/kernel.h>
@@ -16,7 +16,7 @@
/* For each probe you need to allocate a kprobe structure */
static struct kprobe kp = {
- .symbol_name = "do_fork",
+ .symbol_name = "_do_fork",
};
/* kprobe pre_handler: called just before the probed instruction is executed */
diff --git a/samples/kprobes/kretprobe_example.c b/samples/kprobes/kretprobe_example.c
index 1041b67..ebb1d1a 100644
--- a/samples/kprobes/kretprobe_example.c
+++ b/samples/kprobes/kretprobe_example.c
@@ -7,7 +7,7 @@
*
* usage: insmod kretprobe_example.ko func=<func_name>
*
- * If no func_name is specified, do_fork is instrumented
+ * If no func_name is specified, _do_fork is instrumented
*
* For more information on theory of operation of kretprobes, see
* Documentation/kprobes.txt
@@ -25,7 +25,7 @@
#include <linux/limits.h>
#include <linux/sched.h>
-static char func_name[NAME_MAX] = "do_fork";
+static char func_name[NAME_MAX] = "_do_fork";
module_param_string(func, func_name, NAME_MAX, S_IRUGO);
MODULE_PARM_DESC(func, "Function to kretprobe; this module will report the"
" function's execution time");
diff --git a/scripts/extract-cert.c b/scripts/extract-cert.c
index 6ce5945..b071bf4 100644
--- a/scripts/extract-cert.c
+++ b/scripts/extract-cert.c
@@ -17,13 +17,9 @@
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
-#include <getopt.h>
#include <err.h>
-#include <arpa/inet.h>
#include <openssl/bio.h>
-#include <openssl/evp.h>
#include <openssl/pem.h>
-#include <openssl/pkcs7.h>
#include <openssl/err.h>
#include <openssl/engine.h>
diff --git a/scripts/sign-file.c b/scripts/sign-file.c
index c3899ca..250a7a6 100755
--- a/scripts/sign-file.c
+++ b/scripts/sign-file.c
@@ -20,13 +20,34 @@
#include <getopt.h>
#include <err.h>
#include <arpa/inet.h>
+#include <openssl/opensslv.h>
#include <openssl/bio.h>
#include <openssl/evp.h>
#include <openssl/pem.h>
-#include <openssl/cms.h>
#include <openssl/err.h>
#include <openssl/engine.h>
+/*
+ * Use CMS if we have openssl-1.0.0 or newer available - otherwise we have to
+ * assume that it's not available and its header file is missing and that we
+ * should use PKCS#7 instead. Switching to the older PKCS#7 format restricts
+ * the options we have on specifying the X.509 certificate we want.
+ *
+ * Further, older versions of OpenSSL don't support manually adding signers to
+ * the PKCS#7 message so have to accept that we get a certificate included in
+ * the signature message. Nor do such older versions of OpenSSL support
+ * signing with anything other than SHA1 - so we're stuck with that if such is
+ * the case.
+ */
+#if OPENSSL_VERSION_NUMBER < 0x10000000L
+#define USE_PKCS7
+#endif
+#ifndef USE_PKCS7
+#include <openssl/cms.h>
+#else
+#include <openssl/pkcs7.h>
+#endif
+
struct module_signature {
uint8_t algo; /* Public-key crypto algorithm [0] */
uint8_t hash; /* Digest algorithm [0] */
@@ -110,30 +131,42 @@
struct module_signature sig_info = { .id_type = PKEY_ID_PKCS7 };
char *hash_algo = NULL;
char *private_key_name, *x509_name, *module_name, *dest_name;
- bool save_cms = false, replace_orig;
+ bool save_sig = false, replace_orig;
bool sign_only = false;
unsigned char buf[4096];
- unsigned long module_size, cms_size;
- unsigned int use_keyid = 0, use_signed_attrs = CMS_NOATTR;
+ unsigned long module_size, sig_size;
+ unsigned int use_signed_attrs;
const EVP_MD *digest_algo;
EVP_PKEY *private_key;
+#ifndef USE_PKCS7
CMS_ContentInfo *cms;
+ unsigned int use_keyid = 0;
+#else
+ PKCS7 *pkcs7;
+#endif
X509 *x509;
BIO *b, *bd = NULL, *bm;
int opt, n;
-
OpenSSL_add_all_algorithms();
ERR_load_crypto_strings();
ERR_clear_error();
key_pass = getenv("KBUILD_SIGN_PIN");
+#ifndef USE_PKCS7
+ use_signed_attrs = CMS_NOATTR;
+#else
+ use_signed_attrs = PKCS7_NOATTR;
+#endif
+
do {
opt = getopt(argc, argv, "dpk");
switch (opt) {
- case 'p': save_cms = true; break;
- case 'd': sign_only = true; save_cms = true; break;
+ case 'p': save_sig = true; break;
+ case 'd': sign_only = true; save_sig = true; break;
+#ifndef USE_PKCS7
case 'k': use_keyid = CMS_USE_KEYID; break;
+#endif
case -1: break;
default: format();
}
@@ -157,6 +190,14 @@
replace_orig = true;
}
+#ifdef USE_PKCS7
+ if (strcmp(hash_algo, "sha1") != 0) {
+ fprintf(stderr, "sign-file: %s only supports SHA1 signing\n",
+ OPENSSL_VERSION_TEXT);
+ exit(3);
+ }
+#endif
+
/* Read the private key and the X.509 cert the PKCS#7 message
* will point to.
*/
@@ -213,7 +254,8 @@
bm = BIO_new_file(module_name, "rb");
ERR(!bm, "%s", module_name);
- /* Load the CMS message from the digest buffer. */
+#ifndef USE_PKCS7
+ /* Load the signature message from the digest buffer. */
cms = CMS_sign(NULL, NULL, NULL, NULL,
CMS_NOCERTS | CMS_PARTIAL | CMS_BINARY | CMS_DETACHED | CMS_STREAM);
ERR(!cms, "CMS_sign");
@@ -221,17 +263,31 @@
ERR(!CMS_add1_signer(cms, x509, private_key, digest_algo,
CMS_NOCERTS | CMS_BINARY | CMS_NOSMIMECAP |
use_keyid | use_signed_attrs),
- "CMS_sign_add_signer");
+ "CMS_add1_signer");
ERR(CMS_final(cms, bm, NULL, CMS_NOCERTS | CMS_BINARY) < 0,
"CMS_final");
- if (save_cms) {
- char *cms_name;
+#else
+ pkcs7 = PKCS7_sign(x509, private_key, NULL, bm,
+ PKCS7_NOCERTS | PKCS7_BINARY |
+ PKCS7_DETACHED | use_signed_attrs);
+ ERR(!pkcs7, "PKCS7_sign");
+#endif
- ERR(asprintf(&cms_name, "%s.p7s", module_name) < 0, "asprintf");
- b = BIO_new_file(cms_name, "wb");
- ERR(!b, "%s", cms_name);
- ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) < 0, "%s", cms_name);
+ if (save_sig) {
+ char *sig_file_name;
+
+ ERR(asprintf(&sig_file_name, "%s.p7s", module_name) < 0,
+ "asprintf");
+ b = BIO_new_file(sig_file_name, "wb");
+ ERR(!b, "%s", sig_file_name);
+#ifndef USE_PKCS7
+ ERR(i2d_CMS_bio_stream(b, cms, NULL, 0) < 0,
+ "%s", sig_file_name);
+#else
+ ERR(i2d_PKCS7_bio(b, pkcs7) < 0,
+ "%s", sig_file_name);
+#endif
BIO_free(b);
}
@@ -247,9 +303,13 @@
ERR(n < 0, "%s", module_name);
module_size = BIO_number_written(bd);
+#ifndef USE_PKCS7
ERR(i2d_CMS_bio_stream(bd, cms, NULL, 0) < 0, "%s", dest_name);
- cms_size = BIO_number_written(bd) - module_size;
- sig_info.sig_len = htonl(cms_size);
+#else
+ ERR(i2d_PKCS7_bio(bd, pkcs7) < 0, "%s", dest_name);
+#endif
+ sig_size = BIO_number_written(bd) - module_size;
+ sig_info.sig_len = htonl(sig_size);
ERR(BIO_write(bd, &sig_info, sizeof(sig_info)) < 0, "%s", dest_name);
ERR(BIO_write(bd, magic_number, sizeof(magic_number) - 1) < 0, "%s", dest_name);
diff --git a/security/keys/gc.c b/security/keys/gc.c
index c795237..39eac1f 100644
--- a/security/keys/gc.c
+++ b/security/keys/gc.c
@@ -134,6 +134,10 @@
kdebug("- %u", key->serial);
key_check(key);
+ /* Throw away the key data */
+ if (key->type->destroy)
+ key->type->destroy(key);
+
security_key_free(key);
/* deal with the user's key tracking and quota */
@@ -148,10 +152,6 @@
if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
atomic_dec(&key->user->nikeys);
- /* now throw away the key memory */
- if (key->type->destroy)
- key->type->destroy(key);
-
key_user_put(key->user);
kfree(key->description);
diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
index 2975632..c8fe6d1 100644
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -41,6 +41,7 @@
libelf-getphdrnum \
libelf-mmap \
libnuma \
+ numa_num_possible_cpus \
libperl \
libpython \
libpython-version \
@@ -51,7 +52,8 @@
timerfd \
libdw-dwarf-unwind \
zlib \
- lzma
+ lzma \
+ get_cpuid
FEATURE_DISPLAY ?= \
dwarf \
@@ -61,13 +63,15 @@
libbfd \
libelf \
libnuma \
+ numa_num_possible_cpus \
libperl \
libpython \
libslang \
libunwind \
libdw-dwarf-unwind \
zlib \
- lzma
+ lzma \
+ get_cpuid
# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index 74ca420..e43a297 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -19,6 +19,7 @@
test-libelf-getphdrnum.bin \
test-libelf-mmap.bin \
test-libnuma.bin \
+ test-numa_num_possible_cpus.bin \
test-libperl.bin \
test-libpython.bin \
test-libpython-version.bin \
@@ -34,7 +35,8 @@
test-compile-x32.bin \
test-zlib.bin \
test-lzma.bin \
- test-bpf.bin
+ test-bpf.bin \
+ test-get_cpuid.bin
CC := $(CROSS_COMPILE)gcc -MD
PKG_CONFIG := $(CROSS_COMPILE)pkg-config
@@ -87,6 +89,9 @@
test-libnuma.bin:
$(BUILD) -lnuma
+test-numa_num_possible_cpus.bin:
+ $(BUILD) -lnuma
+
test-libunwind.bin:
$(BUILD) -lelf
@@ -162,6 +167,9 @@
test-lzma.bin:
$(BUILD) -llzma
+test-get_cpuid.bin:
+ $(BUILD)
+
test-bpf.bin:
$(BUILD)
diff --git a/tools/build/feature/test-all.c b/tools/build/feature/test-all.c
index 84689a6..33cf6f2 100644
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -77,6 +77,10 @@
# include "test-libnuma.c"
#undef main
+#define main main_test_numa_num_possible_cpus
+# include "test-numa_num_possible_cpus.c"
+#undef main
+
#define main main_test_timerfd
# include "test-timerfd.c"
#undef main
@@ -117,6 +121,10 @@
# include "test-lzma.c"
#undef main
+#define main main_test_get_cpuid
+# include "test-get_cpuid.c"
+#undef main
+
int main(int argc, char *argv[])
{
main_test_libpython();
@@ -136,6 +144,7 @@
main_test_libbfd();
main_test_backtrace();
main_test_libnuma();
+ main_test_numa_num_possible_cpus();
main_test_timerfd();
main_test_stackprotector_all();
main_test_libdw_dwarf_unwind();
@@ -143,6 +152,7 @@
main_test_zlib();
main_test_pthread_attr_setaffinity_np();
main_test_lzma();
+ main_test_get_cpuid();
return 0;
}
diff --git a/tools/build/feature/test-get_cpuid.c b/tools/build/feature/test-get_cpuid.c
new file mode 100644
index 0000000..d7a2c40
--- /dev/null
+++ b/tools/build/feature/test-get_cpuid.c
@@ -0,0 +1,7 @@
+#include <cpuid.h>
+
+int main(void)
+{
+ unsigned int eax = 0, ebx = 0, ecx = 0, edx = 0;
+ return __get_cpuid(0x15, &eax, &ebx, &ecx, &edx);
+}
diff --git a/tools/build/feature/test-numa_num_possible_cpus.c b/tools/build/feature/test-numa_num_possible_cpus.c
new file mode 100644
index 0000000..2606e94
--- /dev/null
+++ b/tools/build/feature/test-numa_num_possible_cpus.c
@@ -0,0 +1,6 @@
+#include <numa.h>
+
+int main(void)
+{
+ return numa_num_possible_cpus();
+}
diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 4d88593..cf42b09 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -3795,7 +3795,7 @@
struct format_field *field;
struct printk_map *printk;
long long val, fval;
- unsigned long addr;
+ unsigned long long addr;
char *str;
unsigned char *hex;
int print;
@@ -3828,13 +3828,30 @@
*/
if (!(field->flags & FIELD_IS_ARRAY) &&
field->size == pevent->long_size) {
- addr = *(unsigned long *)(data + field->offset);
+
+ /* Handle heterogeneous recording and processing
+ * architectures
+ *
+ * CASE I:
+ * Traces recorded on 32-bit devices (32-bit
+ * addressing) and processed on 64-bit devices:
+ * In this case, only 32 bits should be read.
+ *
+ * CASE II:
+ * Traces recorded on 64 bit devices and processed
+ * on 32-bit devices:
+ * In this case, 64 bits must be read.
+ */
+ addr = (pevent->long_size == 8) ?
+ *(unsigned long long *)(data + field->offset) :
+ (unsigned long long)*(unsigned int *)(data + field->offset);
+
/* Check if it matches a print format */
printk = find_printk(pevent, addr);
if (printk)
trace_seq_puts(s, printk->printk);
else
- trace_seq_printf(s, "%lx", addr);
+ trace_seq_printf(s, "%llx", addr);
break;
}
str = malloc(len + 1);
diff --git a/tools/perf/Documentation/intel-pt.txt b/tools/perf/Documentation/intel-pt.txt
index 4a0501d..c94c9de 100644
--- a/tools/perf/Documentation/intel-pt.txt
+++ b/tools/perf/Documentation/intel-pt.txt
@@ -364,21 +364,6 @@
CYC packets are not requested by default.
-no_force_psb This is a driver option and is not in the IA32_RTIT_CTL MSR.
-
- It stops the driver resetting the byte count to zero whenever
- enabling the trace (for example on context switches) which in
- turn results in no PSB being forced. However some processors
- will produce a PSB anyway.
-
- In any case, there is still a PSB when the trace is enabled for
- the first time.
-
- no_force_psb can be used to slightly decrease the trace size but
- may make it harder for the decoder to recover from errors.
-
- no_force_psb is not selected by default.
-
new snapshot option
-------------------
diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile
index 827557f..38a0853 100644
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@ -573,9 +573,14 @@
msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
NO_LIBNUMA := 1
else
- CFLAGS += -DHAVE_LIBNUMA_SUPPORT
- EXTLIBS += -lnuma
- $(call detected,CONFIG_NUMA)
+ ifeq ($(feature-numa_num_possible_cpus), 0)
+ msg := $(warning Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8);
+ NO_LIBNUMA := 1
+ else
+ CFLAGS += -DHAVE_LIBNUMA_SUPPORT
+ EXTLIBS += -lnuma
+ $(call detected,CONFIG_NUMA)
+ endif
endif
endif
@@ -621,8 +626,13 @@
endif
ifndef NO_AUXTRACE
- $(call detected,CONFIG_AUXTRACE)
- CFLAGS += -DHAVE_AUXTRACE_SUPPORT
+ ifeq ($(feature-get_cpuid), 0)
+ msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc);
+ NO_AUXTRACE := 1
+ else
+ $(call detected,CONFIG_AUXTRACE)
+ CFLAGS += -DHAVE_AUXTRACE_SUPPORT
+ endif
endif
# Among the variables below, these:
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index eb5f18b..c6f9af7 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -270,12 +270,13 @@
int ret = 0;
if (module) {
- list_for_each_entry(dso, &host_machine->dsos.head, node) {
- if (!dso->kernel)
- continue;
- if (strncmp(dso->short_name + 1, module,
- dso->short_name_len - 2) == 0)
- goto found;
+ char module_name[128];
+
+ snprintf(module_name, sizeof(module_name), "[%s]", module);
+ map = map_groups__find_by_name(&host_machine->kmaps, MAP__FUNCTION, module_name);
+ if (map) {
+ dso = map->dso;
+ goto found;
}
pr_debug("Failed to find module %s.\n", module);
return -ENOENT;
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 8a4537e..fc3f7c9 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -1580,7 +1580,10 @@
file_offset = page_offset;
head = data_offset - page_offset;
- if (data_size && (data_offset + data_size < file_size))
+ if (data_size == 0)
+ goto out;
+
+ if (data_offset + data_size < file_size)
file_size = data_offset + data_size;
ui_progress__init(&prog, file_size, "Processing events...");
diff --git a/tools/perf/util/stat.c b/tools/perf/util/stat.c
index 415c359..2d065d0 100644
--- a/tools/perf/util/stat.c
+++ b/tools/perf/util/stat.c
@@ -196,7 +196,8 @@
memset(counter->per_pkg_mask, 0, MAX_NR_CPUS);
}
-static int check_per_pkg(struct perf_evsel *counter, int cpu, bool *skip)
+static int check_per_pkg(struct perf_evsel *counter,
+ struct perf_counts_values *vals, int cpu, bool *skip)
{
unsigned long *mask = counter->per_pkg_mask;
struct cpu_map *cpus = perf_evsel__cpus(counter);
@@ -218,6 +219,17 @@
counter->per_pkg_mask = mask;
}
+ /*
+ * we do not consider an event that has not run as a good
+ * instance to mark a package as used (skip=1). Otherwise
+ * we may run into a situation where the first CPU in a package
+ * is not running anything, yet the second is, and this function
+ * would mark the package as used after the first CPU and would
+ * not read the values from the second CPU.
+ */
+ if (!(vals->run && vals->ena))
+ return 0;
+
s = cpu_map__get_socket(cpus, cpu);
if (s < 0)
return -1;
@@ -235,7 +247,7 @@
static struct perf_counts_values zero;
bool skip = false;
- if (check_per_pkg(evsel, cpu, &skip)) {
+ if (check_per_pkg(evsel, count, cpu, &skip)) {
pr_err("failed to read per-pkg counter\n");
return -1;
}
diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c
index 53bb5f5..475d88d 100644
--- a/tools/perf/util/symbol-elf.c
+++ b/tools/perf/util/symbol-elf.c
@@ -38,7 +38,7 @@
#endif
#ifndef HAVE_ELF_GETPHDRNUM_SUPPORT
-int elf_getphdrnum(Elf *elf, size_t *dst)
+static int elf_getphdrnum(Elf *elf, size_t *dst)
{
GElf_Ehdr gehdr;
GElf_Ehdr *ehdr;
@@ -1271,8 +1271,6 @@
static int kcore__init(struct kcore *kcore, char *filename, int elfclass,
bool temp)
{
- GElf_Ehdr *ehdr;
-
kcore->elfclass = elfclass;
if (temp)
@@ -1289,9 +1287,7 @@
if (!gelf_newehdr(kcore->elf, elfclass))
goto out_end;
- ehdr = gelf_getehdr(kcore->elf, &kcore->ehdr);
- if (!ehdr)
- goto out_end;
+ memset(&kcore->ehdr, 0, sizeof(GElf_Ehdr));
return 0;
@@ -1348,23 +1344,18 @@
static int kcore__add_phdr(struct kcore *kcore, int idx, off_t offset,
u64 addr, u64 len)
{
- GElf_Phdr gphdr;
- GElf_Phdr *phdr;
+ GElf_Phdr phdr = {
+ .p_type = PT_LOAD,
+ .p_flags = PF_R | PF_W | PF_X,
+ .p_offset = offset,
+ .p_vaddr = addr,
+ .p_paddr = 0,
+ .p_filesz = len,
+ .p_memsz = len,
+ .p_align = page_size,
+ };
- phdr = gelf_getphdr(kcore->elf, idx, &gphdr);
- if (!phdr)
- return -1;
-
- phdr->p_type = PT_LOAD;
- phdr->p_flags = PF_R | PF_W | PF_X;
- phdr->p_offset = offset;
- phdr->p_vaddr = addr;
- phdr->p_paddr = 0;
- phdr->p_filesz = len;
- phdr->p_memsz = len;
- phdr->p_align = page_size;
-
- if (!gelf_update_phdr(kcore->elf, idx, phdr))
+ if (!gelf_update_phdr(kcore->elf, idx, &phdr))
return -1;
return 0;
diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c
index 7acafb3..c2cd9bf2 100644
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -709,7 +709,7 @@
dir = opendir(procfs__mountpoint());
if (!dir)
- return -1;
+ return false;
/* Walk through the directory. */
while (ret && (d = readdir(dir)) != NULL) {
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 9655cb4..bde0ef1 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -71,8 +71,11 @@
unsigned int extra_msr_offset64;
unsigned int extra_delta_offset32;
unsigned int extra_delta_offset64;
+unsigned int aperf_mperf_multiplier = 1;
int do_smi;
double bclk;
+double base_hz;
+double tsc_tweak = 1.0;
unsigned int show_pkg;
unsigned int show_core;
unsigned int show_cpu;
@@ -502,7 +505,7 @@
/* %Busy */
if (has_aperf) {
if (!skip_c0)
- outp += sprintf(outp, "%8.2f", 100.0 * t->mperf/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * t->mperf/t->tsc/tsc_tweak);
else
outp += sprintf(outp, "********");
}
@@ -510,7 +513,7 @@
/* Bzy_MHz */
if (has_aperf)
outp += sprintf(outp, "%8.0f",
- 1.0 * t->tsc / units * t->aperf / t->mperf / interval_float);
+ 1.0 * t->tsc * tsc_tweak / units * t->aperf / t->mperf / interval_float);
/* TSC_MHz */
outp += sprintf(outp, "%8.0f", 1.0 * t->tsc/units/interval_float);
@@ -984,6 +987,8 @@
return -3;
if (get_msr(cpu, MSR_IA32_MPERF, &t->mperf))
return -4;
+ t->aperf = t->aperf * aperf_mperf_multiplier;
+ t->mperf = t->mperf * aperf_mperf_multiplier;
}
if (do_smi) {
@@ -1149,6 +1154,19 @@
int amt_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCL__2, PCLRSV, PCLRSV, PCLRSV, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV};
int phi_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV};
+
+static void
+calculate_tsc_tweak()
+{
+ unsigned long long msr;
+ unsigned int base_ratio;
+
+ get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr);
+ base_ratio = (msr >> 8) & 0xFF;
+ base_hz = base_ratio * bclk * 1000000;
+ tsc_tweak = base_hz / tsc_hz;
+}
+
static void
dump_nhm_platform_info(void)
{
@@ -1926,8 +1944,6 @@
switch (model) {
case 0x3A: /* IVB */
- case 0x3E: /* IVB Xeon */
-
case 0x3C: /* HSW */
case 0x3F: /* HSX */
case 0x45: /* HSW */
@@ -2543,6 +2559,13 @@
return 0;
}
+unsigned int get_aperf_mperf_multiplier(unsigned int family, unsigned int model)
+{
+ if (is_knl(family, model))
+ return 1024;
+ return 1;
+}
+
#define SLM_BCLK_FREQS 5
double slm_freq_table[SLM_BCLK_FREQS] = { 83.3, 100.0, 133.3, 116.7, 80.0};
@@ -2744,6 +2767,9 @@
}
}
+ if (has_aperf)
+ aperf_mperf_multiplier = get_aperf_mperf_multiplier(family, model);
+
do_nhm_platform_info = do_nhm_cstates = do_smi = probe_nhm_msrs(family, model);
do_snb_cstates = has_snb_msrs(family, model);
do_pc2 = do_snb_cstates && (pkg_cstate_limit >= PCL__2);
@@ -2762,6 +2788,9 @@
if (debug)
dump_cstate_pstate_config_info();
+ if (has_skl_msrs(family, model))
+ calculate_tsc_tweak();
+
return;
}
@@ -3090,7 +3119,7 @@
}
void print_version() {
- fprintf(stderr, "turbostat version 4.7 17-June, 2015"
+ fprintf(stderr, "turbostat version 4.8 26-Sep, 2015"
" - Len Brown <lenb@kernel.org>\n");
}