net: dsa: bcm_sf2: Utilize b53_{enable, disable}_port
Export b53_{enable,disable}_port and use these two functions in
bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions
cannot be used without wrapping because we need to manage additional
switch integration details (PHY, Broadcom tag etc.).
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 0863967..0072a95 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -163,7 +163,6 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- s8 cpu_port = ds->dst->cpu_dp->index;
unsigned int i;
u32 reg;
@@ -184,9 +183,6 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
reg |= i << (PRT_TO_QID_SHIFT * i);
core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
- /* Clear the Rx and Tx disable bits and set to no spanning tree */
- core_writel(priv, 0, CORE_G_PCTL_PORT(port));
-
/* Re-enable the GPHY and re-apply workarounds */
if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1) {
bcm_sf2_gphy_enable_set(ds, true);
@@ -209,23 +205,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
if (port == priv->moca_port)
bcm_sf2_port_intr_enable(priv, port);
- /* Set this port, and only this one to be in the default VLAN,
- * if member of a bridge, restore its membership prior to
- * bringing down this port.
- */
- reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
- reg &= ~PORT_VLAN_CTRL_MASK;
- reg |= (1 << port);
- reg |= priv->dev->ports[port].vlan_ctl_mask;
- core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
-
- b53_imp_vlan_setup(ds, cpu_port);
-
- /* If EEE was enabled, restore it */
- if (priv->dev->ports[port].eee.eee_enabled)
- b53_eee_enable_set(ds, port, true);
-
- return 0;
+ return b53_enable_port(ds, port, phy);
}
static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
@@ -248,9 +228,7 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
else
off = CORE_G_PCTL_PORT(port);
- reg = core_readl(priv, off);
- reg |= RX_DIS | TX_DIS;
- core_writel(priv, reg, off);
+ b53_disable_port(ds, port, phy);
/* Power down the port memory */
reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);