| /* |
| * BSS client mode implementation |
| * Copyright 2003-2008, Jouni Malinen <j@w1.fi> |
| * Copyright 2004, Instant802 Networks, Inc. |
| * Copyright 2005, Devicescape Software, Inc. |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> |
| * Copyright 2007, Michael Wu <flamingice@sourmilk.net> |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * Copyright (C) 2015 - 2017 Intel Deutschland GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/if_ether.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/moduleparam.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/crc32.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <net/mac80211.h> |
| #include <asm/unaligned.h> |
| |
| #include "ieee80211_i.h" |
| #include "driver-ops.h" |
| #include "rate.h" |
| #include "led.h" |
| #include "fils_aead.h" |
| |
| #define IEEE80211_AUTH_TIMEOUT (HZ / 5) |
| #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2) |
| #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) |
| #define IEEE80211_AUTH_MAX_TRIES 3 |
| #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) |
| #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) |
| #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2) |
| #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) |
| #define IEEE80211_ASSOC_MAX_TRIES 3 |
| |
| static int max_nullfunc_tries = 2; |
| module_param(max_nullfunc_tries, int, 0644); |
| MODULE_PARM_DESC(max_nullfunc_tries, |
| "Maximum nullfunc tx tries before disconnecting (reason 4)."); |
| |
| static int max_probe_tries = 5; |
| module_param(max_probe_tries, int, 0644); |
| MODULE_PARM_DESC(max_probe_tries, |
| "Maximum probe tries before disconnecting (reason 4)."); |
| |
| /* |
| * Beacon loss timeout is calculated as N frames times the |
| * advertised beacon interval. This may need to be somewhat |
| * higher than what hardware might detect to account for |
| * delays in the host processing frames. But since we also |
| * probe on beacon miss before declaring the connection lost |
| * default to what we want. |
| */ |
| static int beacon_loss_count = 7; |
| module_param(beacon_loss_count, int, 0644); |
| MODULE_PARM_DESC(beacon_loss_count, |
| "Number of beacon intervals before we decide beacon was lost."); |
| |
| /* |
| * Time the connection can be idle before we probe |
| * it to see if we can still talk to the AP. |
| */ |
| #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ) |
| /* |
| * Time we wait for a probe response after sending |
| * a probe request because of beacon loss or for |
| * checking the connection still works. |
| */ |
| static int probe_wait_ms = 500; |
| module_param(probe_wait_ms, int, 0644); |
| MODULE_PARM_DESC(probe_wait_ms, |
| "Maximum time(ms) to wait for probe response" |
| " before disconnecting (reason 4)."); |
| |
| /* |
| * How many Beacon frames need to have been used in average signal strength |
| * before starting to indicate signal change events. |
| */ |
| #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 |
| |
| /* |
| * We can have multiple work items (and connection probing) |
| * scheduling this timer, but we need to take care to only |
| * reschedule it when it should fire _earlier_ than it was |
| * asked for before, or if it's not pending right now. This |
| * function ensures that. Note that it then is required to |
| * run this function for all timeouts after the first one |
| * has happened -- the work that runs from this timer will |
| * do that. |
| */ |
| static void run_again(struct ieee80211_sub_if_data *sdata, |
| unsigned long timeout) |
| { |
| sdata_assert_lock(sdata); |
| |
| if (!timer_pending(&sdata->u.mgd.timer) || |
| time_before(timeout, sdata->u.mgd.timer.expires)) |
| mod_timer(&sdata->u.mgd.timer, timeout); |
| } |
| |
| void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) |
| { |
| if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) |
| return; |
| |
| if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) |
| return; |
| |
| mod_timer(&sdata->u.mgd.bcn_mon_timer, |
| round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout)); |
| } |
| |
| void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| if (unlikely(!ifmgd->associated)) |
| return; |
| |
| if (ifmgd->probe_send_count) |
| ifmgd->probe_send_count = 0; |
| |
| if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) |
| return; |
| |
| mod_timer(&ifmgd->conn_mon_timer, |
| round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); |
| } |
| |
| static int ecw2cw(int ecw) |
| { |
| return (1 << ecw) - 1; |
| } |
| |
| static u32 |
| ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_channel *channel, |
| const struct ieee80211_ht_cap *ht_cap, |
| const struct ieee80211_ht_operation *ht_oper, |
| const struct ieee80211_vht_operation *vht_oper, |
| struct cfg80211_chan_def *chandef, bool tracking) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct cfg80211_chan_def vht_chandef; |
| struct ieee80211_sta_ht_cap sta_ht_cap; |
| u32 ht_cfreq, ret; |
| |
| memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); |
| ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); |
| |
| chandef->chan = channel; |
| chandef->width = NL80211_CHAN_WIDTH_20_NOHT; |
| chandef->center_freq1 = channel->center_freq; |
| chandef->center_freq2 = 0; |
| |
| if (!ht_cap || !ht_oper || !sta_ht_cap.ht_supported) { |
| ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; |
| goto out; |
| } |
| |
| chandef->width = NL80211_CHAN_WIDTH_20; |
| |
| if (!(ht_cap->cap_info & |
| cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40))) { |
| ret = IEEE80211_STA_DISABLE_40MHZ; |
| vht_chandef = *chandef; |
| goto out; |
| } |
| |
| ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, |
| channel->band); |
| /* check that channel matches the right operating channel */ |
| if (!tracking && channel->center_freq != ht_cfreq) { |
| /* |
| * It's possible that some APs are confused here; |
| * Netgear WNDR3700 sometimes reports 4 higher than |
| * the actual channel in association responses, but |
| * since we look at probe response/beacon data here |
| * it should be OK. |
| */ |
| sdata_info(sdata, |
| "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", |
| channel->center_freq, ht_cfreq, |
| ht_oper->primary_chan, channel->band); |
| ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; |
| goto out; |
| } |
| |
| /* check 40 MHz support, if we have it */ |
| if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { |
| ieee80211_chandef_ht_oper(ht_oper, chandef); |
| } else { |
| /* 40 MHz (and 80 MHz) must be supported for VHT */ |
| ret = IEEE80211_STA_DISABLE_VHT; |
| /* also mark 40 MHz disabled */ |
| ret |= IEEE80211_STA_DISABLE_40MHZ; |
| goto out; |
| } |
| |
| if (!vht_oper || !sband->vht_cap.vht_supported) { |
| ret = IEEE80211_STA_DISABLE_VHT; |
| goto out; |
| } |
| |
| vht_chandef = *chandef; |
| if (!ieee80211_chandef_vht_oper(vht_oper, &vht_chandef)) { |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) |
| sdata_info(sdata, |
| "AP VHT information is invalid, disable VHT\n"); |
| ret = IEEE80211_STA_DISABLE_VHT; |
| goto out; |
| } |
| |
| if (!cfg80211_chandef_valid(&vht_chandef)) { |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) |
| sdata_info(sdata, |
| "AP VHT information is invalid, disable VHT\n"); |
| ret = IEEE80211_STA_DISABLE_VHT; |
| goto out; |
| } |
| |
| if (cfg80211_chandef_identical(chandef, &vht_chandef)) { |
| ret = 0; |
| goto out; |
| } |
| |
| if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) |
| sdata_info(sdata, |
| "AP VHT information doesn't match HT, disable VHT\n"); |
| ret = IEEE80211_STA_DISABLE_VHT; |
| goto out; |
| } |
| |
| *chandef = vht_chandef; |
| |
| ret = 0; |
| |
| out: |
| /* |
| * When tracking the current AP, don't do any further checks if the |
| * new chandef is identical to the one we're currently using for the |
| * connection. This keeps us from playing ping-pong with regulatory, |
| * without it the following can happen (for example): |
| * - connect to an AP with 80 MHz, world regdom allows 80 MHz |
| * - AP advertises regdom US |
| * - CRDA loads regdom US with 80 MHz prohibited (old database) |
| * - the code below detects an unsupported channel, downgrades, and |
| * we disconnect from the AP in the caller |
| * - disconnect causes CRDA to reload world regdomain and the game |
| * starts anew. |
| * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) |
| * |
| * It seems possible that there are still scenarios with CSA or real |
| * bandwidth changes where a this could happen, but those cases are |
| * less common and wouldn't completely prevent using the AP. |
| */ |
| if (tracking && |
| cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef)) |
| return ret; |
| |
| /* don't print the message below for VHT mismatch if VHT is disabled */ |
| if (ret & IEEE80211_STA_DISABLE_VHT) |
| vht_chandef = *chandef; |
| |
| /* |
| * Ignore the DISABLED flag when we're already connected and only |
| * tracking the APs beacon for bandwidth changes - otherwise we |
| * might get disconnected here if we connect to an AP, update our |
| * regulatory information based on the AP's country IE and the |
| * information we have is wrong/outdated and disables the channel |
| * that we're actually using for the connection to the AP. |
| */ |
| while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, |
| tracking ? 0 : |
| IEEE80211_CHAN_DISABLED)) { |
| if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { |
| ret = IEEE80211_STA_DISABLE_HT | |
| IEEE80211_STA_DISABLE_VHT; |
| break; |
| } |
| |
| ret |= ieee80211_chandef_downgrade(chandef); |
| } |
| |
| if (chandef->width != vht_chandef.width && !tracking) |
| sdata_info(sdata, |
| "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); |
| |
| WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); |
| return ret; |
| } |
| |
| static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, |
| const struct ieee80211_ht_cap *ht_cap, |
| const struct ieee80211_ht_operation *ht_oper, |
| const struct ieee80211_vht_operation *vht_oper, |
| const u8 *bssid, u32 *changed) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *chan; |
| struct cfg80211_chan_def chandef; |
| u16 ht_opmode; |
| u32 flags; |
| enum ieee80211_sta_rx_bandwidth new_sta_bw; |
| int ret; |
| |
| /* if HT was/is disabled, don't track any bandwidth changes */ |
| if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper) |
| return 0; |
| |
| /* don't check VHT if we associated as non-VHT station */ |
| if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) |
| vht_oper = NULL; |
| |
| if (WARN_ON_ONCE(!sta)) |
| return -EINVAL; |
| |
| /* |
| * if bss configuration changed store the new one - |
| * this may be applicable even if channel is identical |
| */ |
| ht_opmode = le16_to_cpu(ht_oper->operation_mode); |
| if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { |
| *changed |= BSS_CHANGED_HT; |
| sdata->vif.bss_conf.ht_operation_mode = ht_opmode; |
| } |
| |
| chan = sdata->vif.bss_conf.chandef.chan; |
| sband = local->hw.wiphy->bands[chan->band]; |
| |
| /* calculate new channel (type) based on HT/VHT operation IEs */ |
| flags = ieee80211_determine_chantype(sdata, sband, chan, |
| ht_cap, ht_oper, vht_oper, |
| &chandef, true); |
| |
| /* |
| * Downgrade the new channel if we associated with restricted |
| * capabilities. For example, if we associated as a 20 MHz STA |
| * to a 40 MHz AP (due to regulatory, capabilities or config |
| * reasons) then switching to a 40 MHz channel now won't do us |
| * any good -- we couldn't use it with the AP. |
| */ |
| if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && |
| chandef.width == NL80211_CHAN_WIDTH_80P80) |
| flags |= ieee80211_chandef_downgrade(&chandef); |
| if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && |
| chandef.width == NL80211_CHAN_WIDTH_160) |
| flags |= ieee80211_chandef_downgrade(&chandef); |
| if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && |
| chandef.width > NL80211_CHAN_WIDTH_20) |
| flags |= ieee80211_chandef_downgrade(&chandef); |
| |
| if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef)) |
| return 0; |
| |
| sdata_info(sdata, |
| "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n", |
| ifmgd->bssid, chandef.chan->center_freq, chandef.width, |
| chandef.center_freq1, chandef.center_freq2); |
| |
| if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | |
| IEEE80211_STA_DISABLE_VHT | |
| IEEE80211_STA_DISABLE_40MHZ | |
| IEEE80211_STA_DISABLE_80P80MHZ | |
| IEEE80211_STA_DISABLE_160MHZ)) || |
| !cfg80211_chandef_valid(&chandef)) { |
| sdata_info(sdata, |
| "AP %pM changed bandwidth in a way we can't support - disconnect\n", |
| ifmgd->bssid); |
| return -EINVAL; |
| } |
| |
| switch (chandef.width) { |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| case NL80211_CHAN_WIDTH_20: |
| new_sta_bw = IEEE80211_STA_RX_BW_20; |
| break; |
| case NL80211_CHAN_WIDTH_40: |
| new_sta_bw = IEEE80211_STA_RX_BW_40; |
| break; |
| case NL80211_CHAN_WIDTH_80: |
| new_sta_bw = IEEE80211_STA_RX_BW_80; |
| break; |
| case NL80211_CHAN_WIDTH_80P80: |
| case NL80211_CHAN_WIDTH_160: |
| new_sta_bw = IEEE80211_STA_RX_BW_160; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (new_sta_bw > sta->cur_max_bandwidth) |
| new_sta_bw = sta->cur_max_bandwidth; |
| |
| if (new_sta_bw < sta->sta.bandwidth) { |
| sta->sta.bandwidth = new_sta_bw; |
| rate_control_rate_update(local, sband, sta, |
| IEEE80211_RC_BW_CHANGED); |
| } |
| |
| ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed); |
| if (ret) { |
| sdata_info(sdata, |
| "AP %pM changed bandwidth to incompatible one - disconnect\n", |
| ifmgd->bssid); |
| return ret; |
| } |
| |
| if (new_sta_bw > sta->sta.bandwidth) { |
| sta->sta.bandwidth = new_sta_bw; |
| rate_control_rate_update(local, sband, sta, |
| IEEE80211_RC_BW_CHANGED); |
| } |
| |
| return 0; |
| } |
| |
| /* frame sending functions */ |
| |
| static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, u8 ap_ht_param, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_channel *channel, |
| enum ieee80211_smps_mode smps) |
| { |
| u8 *pos; |
| u32 flags = channel->flags; |
| u16 cap; |
| struct ieee80211_sta_ht_cap ht_cap; |
| |
| BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap)); |
| |
| memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap)); |
| ieee80211_apply_htcap_overrides(sdata, &ht_cap); |
| |
| /* determine capability flags */ |
| cap = ht_cap.cap; |
| |
| switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { |
| case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: |
| if (flags & IEEE80211_CHAN_NO_HT40PLUS) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| break; |
| case IEEE80211_HT_PARAM_CHA_SEC_BELOW: |
| if (flags & IEEE80211_CHAN_NO_HT40MINUS) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| break; |
| } |
| |
| /* |
| * If 40 MHz was disabled associate as though we weren't |
| * capable of 40 MHz -- some broken APs will never fall |
| * back to trying to transmit in 20 MHz. |
| */ |
| if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) { |
| cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; |
| cap &= ~IEEE80211_HT_CAP_SGI_40; |
| } |
| |
| /* set SM PS mode properly */ |
| cap &= ~IEEE80211_HT_CAP_SM_PS; |
| switch (smps) { |
| case IEEE80211_SMPS_AUTOMATIC: |
| case IEEE80211_SMPS_NUM_MODES: |
| WARN_ON(1); |
| case IEEE80211_SMPS_OFF: |
| cap |= WLAN_HT_CAP_SM_PS_DISABLED << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| case IEEE80211_SMPS_STATIC: |
| cap |= WLAN_HT_CAP_SM_PS_STATIC << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| case IEEE80211_SMPS_DYNAMIC: |
| cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << |
| IEEE80211_HT_CAP_SM_PS_SHIFT; |
| break; |
| } |
| |
| /* reserve and fill IE */ |
| pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); |
| ieee80211_ie_build_ht_cap(pos, &ht_cap, cap); |
| } |
| |
| /* This function determines vht capability flags for the association |
| * and builds the IE. |
| * Note - the function may set the owner of the MU-MIMO capability |
| */ |
| static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, |
| struct ieee80211_supported_band *sband, |
| struct ieee80211_vht_cap *ap_vht_cap) |
| { |
| struct ieee80211_local *local = sdata->local; |
| u8 *pos; |
| u32 cap; |
| struct ieee80211_sta_vht_cap vht_cap; |
| u32 mask, ap_bf_sts, our_bf_sts; |
| |
| BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); |
| |
| memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); |
| ieee80211_apply_vhtcap_overrides(sdata, &vht_cap); |
| |
| /* determine capability flags */ |
| cap = vht_cap.cap; |
| |
| if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) { |
| u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| |
| cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || |
| bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) |
| cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; |
| } |
| |
| if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) { |
| cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160; |
| cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; |
| } |
| |
| /* |
| * Some APs apparently get confused if our capabilities are better |
| * than theirs, so restrict what we advertise in the assoc request. |
| */ |
| if (!(ap_vht_cap->vht_cap_info & |
| cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) |
| cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE); |
| else if (!(ap_vht_cap->vht_cap_info & |
| cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))) |
| cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; |
| |
| /* |
| * If some other vif is using the MU-MIMO capablity we cannot associate |
| * using MU-MIMO - this will lead to contradictions in the group-id |
| * mechanism. |
| * Ownership is defined since association request, in order to avoid |
| * simultaneous associations with MU-MIMO. |
| */ |
| if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) { |
| bool disable_mu_mimo = false; |
| struct ieee80211_sub_if_data *other; |
| |
| list_for_each_entry_rcu(other, &local->interfaces, list) { |
| if (other->vif.mu_mimo_owner) { |
| disable_mu_mimo = true; |
| break; |
| } |
| } |
| if (disable_mu_mimo) |
| cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; |
| else |
| sdata->vif.mu_mimo_owner = true; |
| } |
| |
| mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; |
| |
| ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask; |
| our_bf_sts = cap & mask; |
| |
| if (ap_bf_sts < our_bf_sts) { |
| cap &= ~mask; |
| cap |= ap_bf_sts; |
| } |
| |
| /* reserve and fill IE */ |
| pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); |
| ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); |
| } |
| |
| static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; |
| struct sk_buff *skb; |
| struct ieee80211_mgmt *mgmt; |
| u8 *pos, qos_info; |
| size_t offset = 0, noffset; |
| int i, count, rates_len, supp_rates_len, shift; |
| u16 capab; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| struct ieee80211_channel *chan; |
| u32 rate_flags, rates = 0; |
| |
| sdata_assert_lock(sdata); |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (WARN_ON(!chanctx_conf)) { |
| rcu_read_unlock(); |
| return; |
| } |
| chan = chanctx_conf->def.chan; |
| rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def); |
| rcu_read_unlock(); |
| sband = local->hw.wiphy->bands[chan->band]; |
| shift = ieee80211_vif_get_shift(&sdata->vif); |
| |
| if (assoc_data->supp_rates_len) { |
| /* |
| * Get all rates supported by the device and the AP as |
| * some APs don't like getting a superset of their rates |
| * in the association request (e.g. D-Link DAP 1353 in |
| * b-only mode)... |
| */ |
| rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband, |
| assoc_data->supp_rates, |
| assoc_data->supp_rates_len, |
| &rates); |
| } else { |
| /* |
| * In case AP not provide any supported rates information |
| * before association, we send information element(s) with |
| * all rates that we support. |
| */ |
| rates_len = 0; |
| for (i = 0; i < sband->n_bitrates; i++) { |
| if ((rate_flags & sband->bitrates[i].flags) |
| != rate_flags) |
| continue; |
| rates |= BIT(i); |
| rates_len++; |
| } |
| } |
| |
| skb = alloc_skb(local->hw.extra_tx_headroom + |
| sizeof(*mgmt) + /* bit too much but doesn't matter */ |
| 2 + assoc_data->ssid_len + /* SSID */ |
| 4 + rates_len + /* (extended) rates */ |
| 4 + /* power capability */ |
| 2 + 2 * sband->n_channels + /* supported channels */ |
| 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ |
| 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */ |
| assoc_data->ie_len + /* extra IEs */ |
| (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) + |
| 9, /* WMM */ |
| GFP_KERNEL); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| capab = WLAN_CAPABILITY_ESS; |
| |
| if (sband->band == NL80211_BAND_2GHZ) { |
| capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; |
| capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; |
| } |
| |
| if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY) |
| capab |= WLAN_CAPABILITY_PRIVACY; |
| |
| if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && |
| ieee80211_hw_check(&local->hw, SPECTRUM_MGMT)) |
| capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; |
| |
| if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM) |
| capab |= WLAN_CAPABILITY_RADIO_MEASURE; |
| |
| mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24); |
| memset(mgmt, 0, 24); |
| memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN); |
| memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); |
| memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN); |
| |
| if (!is_zero_ether_addr(assoc_data->prev_bssid)) { |
| skb_put(skb, 10); |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_REASSOC_REQ); |
| mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); |
| mgmt->u.reassoc_req.listen_interval = |
| cpu_to_le16(local->hw.conf.listen_interval); |
| memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid, |
| ETH_ALEN); |
| } else { |
| skb_put(skb, 4); |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_ASSOC_REQ); |
| mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); |
| mgmt->u.assoc_req.listen_interval = |
| cpu_to_le16(local->hw.conf.listen_interval); |
| } |
| |
| /* SSID */ |
| pos = skb_put(skb, 2 + assoc_data->ssid_len); |
| *pos++ = WLAN_EID_SSID; |
| *pos++ = assoc_data->ssid_len; |
| memcpy(pos, assoc_data->ssid, assoc_data->ssid_len); |
| |
| /* add all rates which were marked to be used above */ |
| supp_rates_len = rates_len; |
| if (supp_rates_len > 8) |
| supp_rates_len = 8; |
| |
| pos = skb_put(skb, supp_rates_len + 2); |
| *pos++ = WLAN_EID_SUPP_RATES; |
| *pos++ = supp_rates_len; |
| |
| count = 0; |
| for (i = 0; i < sband->n_bitrates; i++) { |
| if (BIT(i) & rates) { |
| int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, |
| 5 * (1 << shift)); |
| *pos++ = (u8) rate; |
| if (++count == 8) |
| break; |
| } |
| } |
| |
| if (rates_len > count) { |
| pos = skb_put(skb, rates_len - count + 2); |
| *pos++ = WLAN_EID_EXT_SUPP_RATES; |
| *pos++ = rates_len - count; |
| |
| for (i++; i < sband->n_bitrates; i++) { |
| if (BIT(i) & rates) { |
| int rate; |
| rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, |
| 5 * (1 << shift)); |
| *pos++ = (u8) rate; |
| } |
| } |
| } |
| |
| if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT || |
| capab & WLAN_CAPABILITY_RADIO_MEASURE) { |
| pos = skb_put(skb, 4); |
| *pos++ = WLAN_EID_PWR_CAPABILITY; |
| *pos++ = 2; |
| *pos++ = 0; /* min tx power */ |
| /* max tx power */ |
| *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def); |
| } |
| |
| if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) { |
| /* TODO: get this in reg domain format */ |
| pos = skb_put(skb, 2 * sband->n_channels + 2); |
| *pos++ = WLAN_EID_SUPPORTED_CHANNELS; |
| *pos++ = 2 * sband->n_channels; |
| for (i = 0; i < sband->n_channels; i++) { |
| *pos++ = ieee80211_frequency_to_channel( |
| sband->channels[i].center_freq); |
| *pos++ = 1; /* one channel in the subband*/ |
| } |
| } |
| |
| /* if present, add any custom IEs that go before HT */ |
| if (assoc_data->ie_len) { |
| static const u8 before_ht[] = { |
| WLAN_EID_SSID, |
| WLAN_EID_SUPP_RATES, |
| WLAN_EID_EXT_SUPP_RATES, |
| WLAN_EID_PWR_CAPABILITY, |
| WLAN_EID_SUPPORTED_CHANNELS, |
| WLAN_EID_RSN, |
| WLAN_EID_QOS_CAPA, |
| WLAN_EID_RRM_ENABLED_CAPABILITIES, |
| WLAN_EID_MOBILITY_DOMAIN, |
| WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */ |
| WLAN_EID_RIC_DATA, /* reassoc only */ |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES, |
| }; |
| static const u8 after_ric[] = { |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES, |
| WLAN_EID_HT_CAPABILITY, |
| WLAN_EID_BSS_COEX_2040, |
| WLAN_EID_EXT_CAPABILITY, |
| WLAN_EID_QOS_TRAFFIC_CAPA, |
| WLAN_EID_TIM_BCAST_REQ, |
| WLAN_EID_INTERWORKING, |
| /* 60GHz doesn't happen right now */ |
| WLAN_EID_VHT_CAPABILITY, |
| WLAN_EID_OPMODE_NOTIF, |
| }; |
| |
| noffset = ieee80211_ie_split_ric(assoc_data->ie, |
| assoc_data->ie_len, |
| before_ht, |
| ARRAY_SIZE(before_ht), |
| after_ric, |
| ARRAY_SIZE(after_ric), |
| offset); |
| pos = skb_put(skb, noffset - offset); |
| memcpy(pos, assoc_data->ie + offset, noffset - offset); |
| offset = noffset; |
| } |
| |
| if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) && |
| !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))) |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) |
| ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param, |
| sband, chan, sdata->smps_mode); |
| |
| /* if present, add any custom IEs that go before VHT */ |
| if (assoc_data->ie_len) { |
| static const u8 before_vht[] = { |
| WLAN_EID_SSID, |
| WLAN_EID_SUPP_RATES, |
| WLAN_EID_EXT_SUPP_RATES, |
| WLAN_EID_PWR_CAPABILITY, |
| WLAN_EID_SUPPORTED_CHANNELS, |
| WLAN_EID_RSN, |
| WLAN_EID_QOS_CAPA, |
| WLAN_EID_RRM_ENABLED_CAPABILITIES, |
| WLAN_EID_MOBILITY_DOMAIN, |
| WLAN_EID_SUPPORTED_REGULATORY_CLASSES, |
| WLAN_EID_HT_CAPABILITY, |
| WLAN_EID_BSS_COEX_2040, |
| WLAN_EID_EXT_CAPABILITY, |
| WLAN_EID_QOS_TRAFFIC_CAPA, |
| WLAN_EID_TIM_BCAST_REQ, |
| WLAN_EID_INTERWORKING, |
| }; |
| |
| /* RIC already taken above, so no need to handle here anymore */ |
| noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len, |
| before_vht, ARRAY_SIZE(before_vht), |
| offset); |
| pos = skb_put(skb, noffset - offset); |
| memcpy(pos, assoc_data->ie + offset, noffset - offset); |
| offset = noffset; |
| } |
| |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) |
| ieee80211_add_vht_ie(sdata, skb, sband, |
| &assoc_data->ap_vht_cap); |
| |
| /* if present, add any custom non-vendor IEs that go after HT */ |
| if (assoc_data->ie_len) { |
| noffset = ieee80211_ie_split_vendor(assoc_data->ie, |
| assoc_data->ie_len, |
| offset); |
| pos = skb_put(skb, noffset - offset); |
| memcpy(pos, assoc_data->ie + offset, noffset - offset); |
| offset = noffset; |
| } |
| |
| if (assoc_data->wmm) { |
| if (assoc_data->uapsd) { |
| qos_info = ifmgd->uapsd_queues; |
| qos_info |= (ifmgd->uapsd_max_sp_len << |
| IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); |
| } else { |
| qos_info = 0; |
| } |
| |
| pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info); |
| } |
| |
| /* add any remaining custom (i.e. vendor specific here) IEs */ |
| if (assoc_data->ie_len) { |
| noffset = assoc_data->ie_len; |
| pos = skb_put(skb, noffset - offset); |
| memcpy(pos, assoc_data->ie + offset, noffset - offset); |
| } |
| |
| if (assoc_data->fils_kek_len && |
| fils_encrypt_assoc_req(skb, assoc_data) < 0) { |
| dev_kfree_skb(skb); |
| return; |
| } |
| |
| drv_mgd_prepare_tx(local, sdata); |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | |
| IEEE80211_TX_INTFL_MLME_CONN_TX; |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| void ieee80211_send_pspoll(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_pspoll *pspoll; |
| struct sk_buff *skb; |
| |
| skb = ieee80211_pspoll_get(&local->hw, &sdata->vif); |
| if (!skb) |
| return; |
| |
| pspoll = (struct ieee80211_pspoll *) skb->data; |
| pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| void ieee80211_send_nullfunc(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata, |
| bool powersave) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_hdr_3addr *nullfunc; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif); |
| if (!skb) |
| return; |
| |
| nullfunc = (struct ieee80211_hdr_3addr *) skb->data; |
| if (powersave) |
| nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | |
| IEEE80211_TX_INTFL_OFFCHAN_TX_OK; |
| |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; |
| |
| if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; |
| |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_hdr *nullfunc; |
| __le16 fc; |
| |
| if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) |
| return; |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30); |
| memset(nullfunc, 0, 30); |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | |
| IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); |
| nullfunc->frame_control = fc; |
| memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN); |
| memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); |
| memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN); |
| memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN); |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| ieee80211_tx_skb(sdata, skb); |
| } |
| |
| /* spectrum management related things */ |
| static void ieee80211_chswitch_work(struct work_struct *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| int ret; |
| |
| if (!ieee80211_sdata_running(sdata)) |
| return; |
| |
| sdata_lock(sdata); |
| mutex_lock(&local->mtx); |
| mutex_lock(&local->chanctx_mtx); |
| |
| if (!ifmgd->associated) |
| goto out; |
| |
| if (!sdata->vif.csa_active) |
| goto out; |
| |
| /* |
| * using reservation isn't immediate as it may be deferred until later |
| * with multi-vif. once reservation is complete it will re-schedule the |
| * work with no reserved_chanctx so verify chandef to check if it |
| * completed successfully |
| */ |
| |
| if (sdata->reserved_chanctx) { |
| /* |
| * with multi-vif csa driver may call ieee80211_csa_finish() |
| * many times while waiting for other interfaces to use their |
| * reservations |
| */ |
| if (sdata->reserved_ready) |
| goto out; |
| |
| ret = ieee80211_vif_use_reserved_context(sdata); |
| if (ret) { |
| sdata_info(sdata, |
| "failed to use reserved channel context, disconnecting (err=%d)\n", |
| ret); |
| ieee80211_queue_work(&sdata->local->hw, |
| &ifmgd->csa_connection_drop_work); |
| goto out; |
| } |
| |
| goto out; |
| } |
| |
| if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef, |
| &sdata->csa_chandef)) { |
| sdata_info(sdata, |
| "failed to finalize channel switch, disconnecting\n"); |
| ieee80211_queue_work(&sdata->local->hw, |
| &ifmgd->csa_connection_drop_work); |
| goto out; |
| } |
| |
| /* XXX: shouldn't really modify cfg80211-owned data! */ |
| ifmgd->associated->channel = sdata->csa_chandef.chan; |
| |
| ifmgd->csa_waiting_bcn = true; |
| |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| ieee80211_sta_reset_conn_monitor(sdata); |
| |
| out: |
| mutex_unlock(&local->chanctx_mtx); |
| mutex_unlock(&local->mtx); |
| sdata_unlock(sdata); |
| } |
| |
| static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| int ret; |
| |
| sdata_assert_lock(sdata); |
| |
| WARN_ON(!sdata->vif.csa_active); |
| |
| if (sdata->csa_block_tx) { |
| ieee80211_wake_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| sdata->csa_block_tx = false; |
| } |
| |
| sdata->vif.csa_active = false; |
| ifmgd->csa_waiting_bcn = false; |
| |
| ret = drv_post_channel_switch(sdata); |
| if (ret) { |
| sdata_info(sdata, |
| "driver post channel switch failed, disconnecting\n"); |
| ieee80211_queue_work(&local->hw, |
| &ifmgd->csa_connection_drop_work); |
| return; |
| } |
| |
| cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef); |
| } |
| |
| void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| trace_api_chswitch_done(sdata, success); |
| if (!success) { |
| sdata_info(sdata, |
| "driver channel switch failed, disconnecting\n"); |
| ieee80211_queue_work(&sdata->local->hw, |
| &ifmgd->csa_connection_drop_work); |
| } else { |
| ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); |
| } |
| } |
| EXPORT_SYMBOL(ieee80211_chswitch_done); |
| |
| static void ieee80211_chswitch_timer(unsigned long data) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| (struct ieee80211_sub_if_data *) data; |
| |
| ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work); |
| } |
| |
| static void |
| ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, |
| u64 timestamp, u32 device_timestamp, |
| struct ieee802_11_elems *elems, |
| bool beacon) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct cfg80211_bss *cbss = ifmgd->associated; |
| struct ieee80211_chanctx_conf *conf; |
| struct ieee80211_chanctx *chanctx; |
| enum nl80211_band current_band; |
| struct ieee80211_csa_ie csa_ie; |
| struct ieee80211_channel_switch ch_switch; |
| int res; |
| |
| sdata_assert_lock(sdata); |
| |
| if (!cbss) |
| return; |
| |
| if (local->scanning) |
| return; |
| |
| /* disregard subsequent announcements if we are already processing */ |
| if (sdata->vif.csa_active) |
| return; |
| |
| current_band = cbss->channel->band; |
| memset(&csa_ie, 0, sizeof(csa_ie)); |
| res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band, |
| ifmgd->flags, |
| ifmgd->associated->bssid, &csa_ie); |
| if (res < 0) |
| ieee80211_queue_work(&local->hw, |
| &ifmgd->csa_connection_drop_work); |
| if (res) |
| return; |
| |
| if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef, |
| IEEE80211_CHAN_DISABLED)) { |
| sdata_info(sdata, |
| "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", |
| ifmgd->associated->bssid, |
| csa_ie.chandef.chan->center_freq, |
| csa_ie.chandef.width, csa_ie.chandef.center_freq1, |
| csa_ie.chandef.center_freq2); |
| ieee80211_queue_work(&local->hw, |
| &ifmgd->csa_connection_drop_work); |
| return; |
| } |
| |
| if (cfg80211_chandef_identical(&csa_ie.chandef, |
| &sdata->vif.bss_conf.chandef)) { |
| if (ifmgd->csa_ignored_same_chan) |
| return; |
| sdata_info(sdata, |
| "AP %pM tries to chanswitch to same channel, ignore\n", |
| ifmgd->associated->bssid); |
| ifmgd->csa_ignored_same_chan = true; |
| return; |
| } |
| |
| /* |
| * Drop all TDLS peers - either we disconnect or move to a different |
| * channel from this point on. There's no telling what our peer will do. |
| * The TDLS WIDER_BW scenario is also problematic, as peers might now |
| * have an incompatible wider chandef. |
| */ |
| ieee80211_teardown_tdls_peers(sdata); |
| |
| mutex_lock(&local->mtx); |
| mutex_lock(&local->chanctx_mtx); |
| conf = rcu_dereference_protected(sdata->vif.chanctx_conf, |
| lockdep_is_held(&local->chanctx_mtx)); |
| if (!conf) { |
| sdata_info(sdata, |
| "no channel context assigned to vif?, disconnecting\n"); |
| goto drop_connection; |
| } |
| |
| chanctx = container_of(conf, struct ieee80211_chanctx, conf); |
| |
| if (local->use_chanctx && |
| !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) { |
| sdata_info(sdata, |
| "driver doesn't support chan-switch with channel contexts\n"); |
| goto drop_connection; |
| } |
| |
| ch_switch.timestamp = timestamp; |
| ch_switch.device_timestamp = device_timestamp; |
| ch_switch.block_tx = csa_ie.mode; |
| ch_switch.chandef = csa_ie.chandef; |
| ch_switch.count = csa_ie.count; |
| |
| if (drv_pre_channel_switch(sdata, &ch_switch)) { |
| sdata_info(sdata, |
| "preparing for channel switch failed, disconnecting\n"); |
| goto drop_connection; |
| } |
| |
| res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef, |
| chanctx->mode, false); |
| if (res) { |
| sdata_info(sdata, |
| "failed to reserve channel context for channel switch, disconnecting (err=%d)\n", |
| res); |
| goto drop_connection; |
| } |
| mutex_unlock(&local->chanctx_mtx); |
| |
| sdata->vif.csa_active = true; |
| sdata->csa_chandef = csa_ie.chandef; |
| sdata->csa_block_tx = csa_ie.mode; |
| ifmgd->csa_ignored_same_chan = false; |
| |
| if (sdata->csa_block_tx) |
| ieee80211_stop_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| mutex_unlock(&local->mtx); |
| |
| cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, |
| csa_ie.count); |
| |
| if (local->ops->channel_switch) { |
| /* use driver's channel switch callback */ |
| drv_channel_switch(local, sdata, &ch_switch); |
| return; |
| } |
| |
| /* channel switch handled in software */ |
| if (csa_ie.count <= 1) |
| ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work); |
| else |
| mod_timer(&ifmgd->chswitch_timer, |
| TU_TO_EXP_TIME((csa_ie.count - 1) * |
| cbss->beacon_interval)); |
| return; |
| drop_connection: |
| ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); |
| mutex_unlock(&local->chanctx_mtx); |
| mutex_unlock(&local->mtx); |
| } |
| |
| static bool |
| ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_channel *channel, |
| const u8 *country_ie, u8 country_ie_len, |
| const u8 *pwr_constr_elem, |
| int *chan_pwr, int *pwr_reduction) |
| { |
| struct ieee80211_country_ie_triplet *triplet; |
| int chan = ieee80211_frequency_to_channel(channel->center_freq); |
| int i, chan_increment; |
| bool have_chan_pwr = false; |
| |
| /* Invalid IE */ |
| if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) |
| return false; |
| |
| triplet = (void *)(country_ie + 3); |
| country_ie_len -= 3; |
| |
| switch (channel->band) { |
| default: |
| WARN_ON_ONCE(1); |
| /* fall through */ |
| case NL80211_BAND_2GHZ: |
| case NL80211_BAND_60GHZ: |
| chan_increment = 1; |
| break; |
| case NL80211_BAND_5GHZ: |
| chan_increment = 4; |
| break; |
| } |
| |
| /* find channel */ |
| while (country_ie_len >= 3) { |
| u8 first_channel = triplet->chans.first_channel; |
| |
| if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID) |
| goto next; |
| |
| for (i = 0; i < triplet->chans.num_channels; i++) { |
| if (first_channel + i * chan_increment == chan) { |
| have_chan_pwr = true; |
| *chan_pwr = triplet->chans.max_power; |
| break; |
| } |
| } |
| if (have_chan_pwr) |
| break; |
| |
| next: |
| triplet++; |
| country_ie_len -= 3; |
| } |
| |
| if (have_chan_pwr && pwr_constr_elem) |
| *pwr_reduction = *pwr_constr_elem; |
| else |
| *pwr_reduction = 0; |
| |
| return have_chan_pwr; |
| } |
| |
| static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_channel *channel, |
| const u8 *cisco_dtpc_ie, |
| int *pwr_level) |
| { |
| /* From practical testing, the first data byte of the DTPC element |
| * seems to contain the requested dBm level, and the CLI on Cisco |
| * APs clearly state the range is -127 to 127 dBm, which indicates |
| * a signed byte, although it seemingly never actually goes negative. |
| * The other byte seems to always be zero. |
| */ |
| *pwr_level = (__s8)cisco_dtpc_ie[4]; |
| } |
| |
| static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_channel *channel, |
| struct ieee80211_mgmt *mgmt, |
| const u8 *country_ie, u8 country_ie_len, |
| const u8 *pwr_constr_ie, |
| const u8 *cisco_dtpc_ie) |
| { |
| bool has_80211h_pwr = false, has_cisco_pwr = false; |
| int chan_pwr = 0, pwr_reduction_80211h = 0; |
| int pwr_level_cisco, pwr_level_80211h; |
| int new_ap_level; |
| __le16 capab = mgmt->u.probe_resp.capab_info; |
| |
| if (country_ie && |
| (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) || |
| capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) { |
| has_80211h_pwr = ieee80211_find_80211h_pwr_constr( |
| sdata, channel, country_ie, country_ie_len, |
| pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h); |
| pwr_level_80211h = |
| max_t(int, 0, chan_pwr - pwr_reduction_80211h); |
| } |
| |
| if (cisco_dtpc_ie) { |
| ieee80211_find_cisco_dtpc( |
| sdata, channel, cisco_dtpc_ie, &pwr_level_cisco); |
| has_cisco_pwr = true; |
| } |
| |
| if (!has_80211h_pwr && !has_cisco_pwr) |
| return 0; |
| |
| /* If we have both 802.11h and Cisco DTPC, apply both limits |
| * by picking the smallest of the two power levels advertised. |
| */ |
| if (has_80211h_pwr && |
| (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { |
| new_ap_level = pwr_level_80211h; |
| |
| if (sdata->ap_power_level == new_ap_level) |
| return 0; |
| |
| sdata_dbg(sdata, |
| "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", |
| pwr_level_80211h, chan_pwr, pwr_reduction_80211h, |
| sdata->u.mgd.bssid); |
| } else { /* has_cisco_pwr is always true here. */ |
| new_ap_level = pwr_level_cisco; |
| |
| if (sdata->ap_power_level == new_ap_level) |
| return 0; |
| |
| sdata_dbg(sdata, |
| "Limiting TX power to %d dBm as advertised by %pM\n", |
| pwr_level_cisco, sdata->u.mgd.bssid); |
| } |
| |
| sdata->ap_power_level = new_ap_level; |
| if (__ieee80211_recalc_txpower(sdata)) |
| return BSS_CHANGED_TXPOWER; |
| return 0; |
| } |
| |
| /* powersave */ |
| static void ieee80211_enable_ps(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_conf *conf = &local->hw.conf; |
| |
| /* |
| * If we are scanning right now then the parameters will |
| * take effect when scan finishes. |
| */ |
| if (local->scanning) |
| return; |
| |
| if (conf->dynamic_ps_timeout > 0 && |
| !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) { |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies(conf->dynamic_ps_timeout)); |
| } else { |
| if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) |
| ieee80211_send_nullfunc(local, sdata, true); |
| |
| if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && |
| ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| return; |
| |
| conf->flags |= IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| } |
| |
| static void ieee80211_change_ps(struct ieee80211_local *local) |
| { |
| struct ieee80211_conf *conf = &local->hw.conf; |
| |
| if (local->ps_sdata) { |
| ieee80211_enable_ps(local, local->ps_sdata); |
| } else if (conf->flags & IEEE80211_CONF_PS) { |
| conf->flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| del_timer_sync(&local->dynamic_ps_timer); |
| cancel_work_sync(&local->dynamic_ps_enable_work); |
| } |
| } |
| |
| static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *mgd = &sdata->u.mgd; |
| struct sta_info *sta = NULL; |
| bool authorized = false; |
| |
| if (!mgd->powersave) |
| return false; |
| |
| if (mgd->broken_ap) |
| return false; |
| |
| if (!mgd->associated) |
| return false; |
| |
| if (mgd->flags & IEEE80211_STA_CONNECTION_POLL) |
| return false; |
| |
| if (!mgd->have_beacon) |
| return false; |
| |
| rcu_read_lock(); |
| sta = sta_info_get(sdata, mgd->bssid); |
| if (sta) |
| authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); |
| rcu_read_unlock(); |
| |
| return authorized; |
| } |
| |
| /* need to hold RTNL or interface lock */ |
| void ieee80211_recalc_ps(struct ieee80211_local *local) |
| { |
| struct ieee80211_sub_if_data *sdata, *found = NULL; |
| int count = 0; |
| int timeout; |
| |
| if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) { |
| local->ps_sdata = NULL; |
| return; |
| } |
| |
| list_for_each_entry(sdata, &local->interfaces, list) { |
| if (!ieee80211_sdata_running(sdata)) |
| continue; |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { |
| /* If an AP vif is found, then disable PS |
| * by setting the count to zero thereby setting |
| * ps_sdata to NULL. |
| */ |
| count = 0; |
| break; |
| } |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) |
| continue; |
| found = sdata; |
| count++; |
| } |
| |
| if (count == 1 && ieee80211_powersave_allowed(found)) { |
| u8 dtimper = found->u.mgd.dtim_period; |
| |
| timeout = local->dynamic_ps_forced_timeout; |
| if (timeout < 0) |
| timeout = 100; |
| local->hw.conf.dynamic_ps_timeout = timeout; |
| |
| /* If the TIM IE is invalid, pretend the value is 1 */ |
| if (!dtimper) |
| dtimper = 1; |
| |
| local->hw.conf.ps_dtim_period = dtimper; |
| local->ps_sdata = found; |
| } else { |
| local->ps_sdata = NULL; |
| } |
| |
| ieee80211_change_ps(local); |
| } |
| |
| void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata) |
| { |
| bool ps_allowed = ieee80211_powersave_allowed(sdata); |
| |
| if (sdata->vif.bss_conf.ps != ps_allowed) { |
| sdata->vif.bss_conf.ps = ps_allowed; |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS); |
| } |
| } |
| |
| void ieee80211_dynamic_ps_disable_work(struct work_struct *work) |
| { |
| struct ieee80211_local *local = |
| container_of(work, struct ieee80211_local, |
| dynamic_ps_disable_work); |
| |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { |
| local->hw.conf.flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| |
| ieee80211_wake_queues_by_reason(&local->hw, |
| IEEE80211_MAX_QUEUE_MAP, |
| IEEE80211_QUEUE_STOP_REASON_PS, |
| false); |
| } |
| |
| void ieee80211_dynamic_ps_enable_work(struct work_struct *work) |
| { |
| struct ieee80211_local *local = |
| container_of(work, struct ieee80211_local, |
| dynamic_ps_enable_work); |
| struct ieee80211_sub_if_data *sdata = local->ps_sdata; |
| struct ieee80211_if_managed *ifmgd; |
| unsigned long flags; |
| int q; |
| |
| /* can only happen when PS was just disabled anyway */ |
| if (!sdata) |
| return; |
| |
| ifmgd = &sdata->u.mgd; |
| |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) |
| return; |
| |
| if (local->hw.conf.dynamic_ps_timeout > 0) { |
| /* don't enter PS if TX frames are pending */ |
| if (drv_tx_frames_pending(local)) { |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies( |
| local->hw.conf.dynamic_ps_timeout)); |
| return; |
| } |
| |
| /* |
| * transmission can be stopped by others which leads to |
| * dynamic_ps_timer expiry. Postpone the ps timer if it |
| * is not the actual idle state. |
| */ |
| spin_lock_irqsave(&local->queue_stop_reason_lock, flags); |
| for (q = 0; q < local->hw.queues; q++) { |
| if (local->queue_stop_reasons[q]) { |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, |
| flags); |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies( |
| local->hw.conf.dynamic_ps_timeout)); |
| return; |
| } |
| } |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); |
| } |
| |
| if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && |
| !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { |
| if (drv_tx_frames_pending(local)) { |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies( |
| local->hw.conf.dynamic_ps_timeout)); |
| } else { |
| ieee80211_send_nullfunc(local, sdata, true); |
| /* Flush to get the tx status of nullfunc frame */ |
| ieee80211_flush_queues(local, sdata, false); |
| } |
| } |
| |
| if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) && |
| ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) || |
| (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { |
| ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; |
| local->hw.conf.flags |= IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| } |
| |
| void ieee80211_dynamic_ps_timer(unsigned long data) |
| { |
| struct ieee80211_local *local = (void *) data; |
| |
| ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); |
| } |
| |
| void ieee80211_dfs_cac_timer_work(struct work_struct *work) |
| { |
| struct delayed_work *delayed_work = to_delayed_work(work); |
| struct ieee80211_sub_if_data *sdata = |
| container_of(delayed_work, struct ieee80211_sub_if_data, |
| dfs_cac_timer_work); |
| struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef; |
| |
| mutex_lock(&sdata->local->mtx); |
| if (sdata->wdev.cac_started) { |
| ieee80211_vif_release_channel(sdata); |
| cfg80211_cac_event(sdata->dev, &chandef, |
| NL80211_RADAR_CAC_FINISHED, |
| GFP_KERNEL); |
| } |
| mutex_unlock(&sdata->local->mtx); |
| } |
| |
| static bool |
| __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| bool ret = false; |
| int ac; |
| |
| if (local->hw.queues < IEEE80211_NUM_ACS) |
| return false; |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; |
| int non_acm_ac; |
| unsigned long now = jiffies; |
| |
| if (tx_tspec->action == TX_TSPEC_ACTION_NONE && |
| tx_tspec->admitted_time && |
| time_after(now, tx_tspec->time_slice_start + HZ)) { |
| tx_tspec->consumed_tx_time = 0; |
| tx_tspec->time_slice_start = now; |
| |
| if (tx_tspec->downgraded) |
| tx_tspec->action = |
| TX_TSPEC_ACTION_STOP_DOWNGRADE; |
| } |
| |
| switch (tx_tspec->action) { |
| case TX_TSPEC_ACTION_STOP_DOWNGRADE: |
| /* take the original parameters */ |
| if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac])) |
| sdata_err(sdata, |
| "failed to set TX queue parameters for queue %d\n", |
| ac); |
| tx_tspec->action = TX_TSPEC_ACTION_NONE; |
| tx_tspec->downgraded = false; |
| ret = true; |
| break; |
| case TX_TSPEC_ACTION_DOWNGRADE: |
| if (time_after(now, tx_tspec->time_slice_start + HZ)) { |
| tx_tspec->action = TX_TSPEC_ACTION_NONE; |
| ret = true; |
| break; |
| } |
| /* downgrade next lower non-ACM AC */ |
| for (non_acm_ac = ac + 1; |
| non_acm_ac < IEEE80211_NUM_ACS; |
| non_acm_ac++) |
| if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac))) |
| break; |
| /* Usually the loop will result in using BK even if it |
| * requires admission control, but such a configuration |
| * makes no sense and we have to transmit somehow - the |
| * AC selection does the same thing. |
| * If we started out trying to downgrade from BK, then |
| * the extra condition here might be needed. |
| */ |
| if (non_acm_ac >= IEEE80211_NUM_ACS) |
| non_acm_ac = IEEE80211_AC_BK; |
| if (drv_conf_tx(local, sdata, ac, |
| &sdata->tx_conf[non_acm_ac])) |
| sdata_err(sdata, |
| "failed to set TX queue parameters for queue %d\n", |
| ac); |
| tx_tspec->action = TX_TSPEC_ACTION_NONE; |
| ret = true; |
| schedule_delayed_work(&ifmgd->tx_tspec_wk, |
| tx_tspec->time_slice_start + HZ - now + 1); |
| break; |
| case TX_TSPEC_ACTION_NONE: |
| /* nothing now */ |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) |
| { |
| if (__ieee80211_sta_handle_tspec_ac_params(sdata)) |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS); |
| } |
| |
| static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| sdata = container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.tx_tspec_wk.work); |
| ieee80211_sta_handle_tspec_ac_params(sdata); |
| } |
| |
| /* MLME */ |
| static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata, |
| const u8 *wmm_param, size_t wmm_param_len) |
| { |
| struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS]; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| size_t left; |
| int count, ac; |
| const u8 *pos; |
| u8 uapsd_queues = 0; |
| |
| if (!local->ops->conf_tx) |
| return false; |
| |
| if (local->hw.queues < IEEE80211_NUM_ACS) |
| return false; |
| |
| if (!wmm_param) |
| return false; |
| |
| if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) |
| return false; |
| |
| if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) |
| uapsd_queues = ifmgd->uapsd_queues; |
| |
| count = wmm_param[6] & 0x0f; |
| if (count == ifmgd->wmm_last_param_set) |
| return false; |
| ifmgd->wmm_last_param_set = count; |
| |
| pos = wmm_param + 8; |
| left = wmm_param_len - 8; |
| |
| memset(¶ms, 0, sizeof(params)); |
| |
| sdata->wmm_acm = 0; |
| for (; left >= 4; left -= 4, pos += 4) { |
| int aci = (pos[0] >> 5) & 0x03; |
| int acm = (pos[0] >> 4) & 0x01; |
| bool uapsd = false; |
| |
| switch (aci) { |
| case 1: /* AC_BK */ |
| ac = IEEE80211_AC_BK; |
| if (acm) |
| sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */ |
| if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) |
| uapsd = true; |
| break; |
| case 2: /* AC_VI */ |
| ac = IEEE80211_AC_VI; |
| if (acm) |
| sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */ |
| if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) |
| uapsd = true; |
| break; |
| case 3: /* AC_VO */ |
| ac = IEEE80211_AC_VO; |
| if (acm) |
| sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */ |
| if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) |
| uapsd = true; |
| break; |
| case 0: /* AC_BE */ |
| default: |
| ac = IEEE80211_AC_BE; |
| if (acm) |
| sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */ |
| if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) |
| uapsd = true; |
| break; |
| } |
| |
| params[ac].aifs = pos[0] & 0x0f; |
| |
| if (params[ac].aifs < 2) { |
| sdata_info(sdata, |
| "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n", |
| params[ac].aifs, aci); |
| params[ac].aifs = 2; |
| } |
| params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4); |
| params[ac].cw_min = ecw2cw(pos[1] & 0x0f); |
| params[ac].txop = get_unaligned_le16(pos + 2); |
| params[ac].acm = acm; |
| params[ac].uapsd = uapsd; |
| |
| if (params[ac].cw_min > params[ac].cw_max) { |
| sdata_info(sdata, |
| "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n", |
| params[ac].cw_min, params[ac].cw_max, aci); |
| return false; |
| } |
| } |
| |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { |
| mlme_dbg(sdata, |
| "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n", |
| ac, params[ac].acm, |
| params[ac].aifs, params[ac].cw_min, params[ac].cw_max, |
| params[ac].txop, params[ac].uapsd, |
| ifmgd->tx_tspec[ac].downgraded); |
| sdata->tx_conf[ac] = params[ac]; |
| if (!ifmgd->tx_tspec[ac].downgraded && |
| drv_conf_tx(local, sdata, ac, ¶ms[ac])) |
| sdata_err(sdata, |
| "failed to set TX queue parameters for AC %d\n", |
| ac); |
| } |
| |
| /* enable WMM or activate new settings */ |
| sdata->vif.bss_conf.qos = true; |
| return true; |
| } |
| |
| static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) |
| { |
| lockdep_assert_held(&sdata->local->mtx); |
| |
| sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL; |
| ieee80211_run_deferred_scan(sdata->local); |
| } |
| |
| static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) |
| { |
| mutex_lock(&sdata->local->mtx); |
| __ieee80211_stop_poll(sdata); |
| mutex_unlock(&sdata->local->mtx); |
| } |
| |
| static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, |
| u16 capab, bool erp_valid, u8 erp) |
| { |
| struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; |
| struct ieee80211_supported_band *sband; |
| u32 changed = 0; |
| bool use_protection; |
| bool use_short_preamble; |
| bool use_short_slot; |
| |
| sband = ieee80211_get_sband(sdata); |
| if (!sband) |
| return changed; |
| |
| if (erp_valid) { |
| use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0; |
| use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0; |
| } else { |
| use_protection = false; |
| use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE); |
| } |
| |
| use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); |
| if (sband->band == NL80211_BAND_5GHZ) |
| use_short_slot = true; |
| |
| if (use_protection != bss_conf->use_cts_prot) { |
| bss_conf->use_cts_prot = use_protection; |
| changed |= BSS_CHANGED_ERP_CTS_PROT; |
| } |
| |
| if (use_short_preamble != bss_conf->use_short_preamble) { |
| bss_conf->use_short_preamble = use_short_preamble; |
| changed |= BSS_CHANGED_ERP_PREAMBLE; |
| } |
| |
| if (use_short_slot != bss_conf->use_short_slot) { |
| bss_conf->use_short_slot = use_short_slot; |
| changed |= BSS_CHANGED_ERP_SLOT; |
| } |
| |
| return changed; |
| } |
| |
| static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_bss *cbss, |
| u32 bss_info_changed) |
| { |
| struct ieee80211_bss *bss = (void *)cbss->priv; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; |
| |
| bss_info_changed |= BSS_CHANGED_ASSOC; |
| bss_info_changed |= ieee80211_handle_bss_capability(sdata, |
| bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value); |
| |
| sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec( |
| beacon_loss_count * bss_conf->beacon_int)); |
| |
| sdata->u.mgd.associated = cbss; |
| memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN); |
| |
| ieee80211_check_rate_mask(sdata); |
| |
| sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE; |
| |
| if (sdata->vif.p2p || |
| sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { |
| const struct cfg80211_bss_ies *ies; |
| |
| rcu_read_lock(); |
| ies = rcu_dereference(cbss->ies); |
| if (ies) { |
| int ret; |
| |
| ret = cfg80211_get_p2p_attr( |
| ies->data, ies->len, |
| IEEE80211_P2P_ATTR_ABSENCE_NOTICE, |
| (u8 *) &bss_conf->p2p_noa_attr, |
| sizeof(bss_conf->p2p_noa_attr)); |
| if (ret >= 2) { |
| sdata->u.mgd.p2p_noa_index = |
| bss_conf->p2p_noa_attr.index; |
| bss_info_changed |= BSS_CHANGED_P2P_PS; |
| } |
| } |
| rcu_read_unlock(); |
| } |
| |
| /* just to be sure */ |
| ieee80211_stop_poll(sdata); |
| |
| ieee80211_led_assoc(local, 1); |
| |
| if (sdata->u.mgd.have_beacon) { |
| /* |
| * If the AP is buggy we may get here with no DTIM period |
| * known, so assume it's 1 which is the only safe assumption |
| * in that case, although if the TIM IE is broken powersave |
| * probably just won't work at all. |
| */ |
| bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1; |
| bss_conf->beacon_rate = bss->beacon_rate; |
| bss_info_changed |= BSS_CHANGED_BEACON_INFO; |
| } else { |
| bss_conf->beacon_rate = NULL; |
| bss_conf->dtim_period = 0; |
| } |
| |
| bss_conf->assoc = 1; |
| |
| /* Tell the driver to monitor connection quality (if supported) */ |
| if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI && |
| bss_conf->cqm_rssi_thold) |
| bss_info_changed |= BSS_CHANGED_CQM; |
| |
| /* Enable ARP filtering */ |
| if (bss_conf->arp_addr_cnt) |
| bss_info_changed |= BSS_CHANGED_ARP_FILTER; |
| |
| ieee80211_bss_info_change_notify(sdata, bss_info_changed); |
| |
| mutex_lock(&local->iflist_mtx); |
| ieee80211_recalc_ps(local); |
| mutex_unlock(&local->iflist_mtx); |
| |
| ieee80211_recalc_smps(sdata); |
| ieee80211_recalc_ps_vif(sdata); |
| |
| netif_carrier_on(sdata->dev); |
| } |
| |
| static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, |
| u16 stype, u16 reason, bool tx, |
| u8 *frame_buf) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_local *local = sdata->local; |
| u32 changed = 0; |
| |
| sdata_assert_lock(sdata); |
| |
| if (WARN_ON_ONCE(tx && !frame_buf)) |
| return; |
| |
| if (WARN_ON(!ifmgd->associated)) |
| return; |
| |
| ieee80211_stop_poll(sdata); |
| |
| ifmgd->associated = NULL; |
| netif_carrier_off(sdata->dev); |
| |
| /* |
| * if we want to get out of ps before disassoc (why?) we have |
| * to do it before sending disassoc, as otherwise the null-packet |
| * won't be valid. |
| */ |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { |
| local->hw.conf.flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| local->ps_sdata = NULL; |
| |
| /* disable per-vif ps */ |
| ieee80211_recalc_ps_vif(sdata); |
| |
| /* make sure ongoing transmission finishes */ |
| synchronize_net(); |
| |
| /* |
| * drop any frame before deauth/disassoc, this can be data or |
| * management frame. Since we are disconnecting, we should not |
| * insist sending these frames which can take time and delay |
| * the disconnection and possible the roaming. |
| */ |
| if (tx) |
| ieee80211_flush_queues(local, sdata, true); |
| |
| /* deauthenticate/disassociate now */ |
| if (tx || frame_buf) |
| ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype, |
| reason, tx, frame_buf); |
| |
| /* flush out frame - make sure the deauth was actually sent */ |
| if (tx) |
| ieee80211_flush_queues(local, sdata, false); |
| |
| /* clear bssid only after building the needed mgmt frames */ |
| eth_zero_addr(ifmgd->bssid); |
| |
| /* remove AP and TDLS peers */ |
| sta_info_flush(sdata); |
| |
| /* finally reset all BSS / config parameters */ |
| changed |= ieee80211_reset_erp_info(sdata); |
| |
| ieee80211_led_assoc(local, 0); |
| changed |= BSS_CHANGED_ASSOC; |
| sdata->vif.bss_conf.assoc = false; |
| |
| ifmgd->p2p_noa_index = -1; |
| memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, |
| sizeof(sdata->vif.bss_conf.p2p_noa_attr)); |
| |
| /* on the next assoc, re-program HT/VHT parameters */ |
| memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa)); |
| memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask)); |
| memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa)); |
| memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask)); |
| |
| /* reset MU-MIMO ownership and group data */ |
| memset(sdata->vif.bss_conf.mu_group.membership, 0, |
| sizeof(sdata->vif.bss_conf.mu_group.membership)); |
| memset(sdata->vif.bss_conf.mu_group.position, 0, |
| sizeof(sdata->vif.bss_conf.mu_group.position)); |
| changed |= BSS_CHANGED_MU_GROUPS; |
| sdata->vif.mu_mimo_owner = false; |
| |
| sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL; |
| |
| del_timer_sync(&local->dynamic_ps_timer); |
| cancel_work_sync(&local->dynamic_ps_enable_work); |
| |
| /* Disable ARP filtering */ |
| if (sdata->vif.bss_conf.arp_addr_cnt) |
| changed |= BSS_CHANGED_ARP_FILTER; |
| |
| sdata->vif.bss_conf.qos = false; |
| changed |= BSS_CHANGED_QOS; |
| |
| /* The BSSID (not really interesting) and HT changed */ |
| changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT; |
| ieee80211_bss_info_change_notify(sdata, changed); |
| |
| /* disassociated - set to defaults now */ |
| ieee80211_set_wmm_default(sdata, false, false); |
| |
| del_timer_sync(&sdata->u.mgd.conn_mon_timer); |
| del_timer_sync(&sdata->u.mgd.bcn_mon_timer); |
| del_timer_sync(&sdata->u.mgd.timer); |
| del_timer_sync(&sdata->u.mgd.chswitch_timer); |
| |
| sdata->vif.bss_conf.dtim_period = 0; |
| sdata->vif.bss_conf.beacon_rate = NULL; |
| |
| ifmgd->have_beacon = false; |
| |
| ifmgd->flags = 0; |
| mutex_lock(&local->mtx); |
| ieee80211_vif_release_channel(sdata); |
| |
| sdata->vif.csa_active = false; |
| ifmgd->csa_waiting_bcn = false; |
| ifmgd->csa_ignored_same_chan = false; |
| if (sdata->csa_block_tx) { |
| ieee80211_wake_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| sdata->csa_block_tx = false; |
| } |
| mutex_unlock(&local->mtx); |
| |
| /* existing TX TSPEC sessions no longer exist */ |
| memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec)); |
| cancel_delayed_work_sync(&ifmgd->tx_tspec_wk); |
| |
| sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM; |
| } |
| |
| void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_hdr *hdr) |
| { |
| /* |
| * We can postpone the mgd.timer whenever receiving unicast frames |
| * from AP because we know that the connection is working both ways |
| * at that time. But multicast frames (and hence also beacons) must |
| * be ignored here, because we need to trigger the timer during |
| * data idle periods for sending the periodic probe request to the |
| * AP we're connected to. |
| */ |
| if (is_multicast_ether_addr(hdr->addr1)) |
| return; |
| |
| ieee80211_sta_reset_conn_monitor(sdata); |
| } |
| |
| static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_local *local = sdata->local; |
| |
| mutex_lock(&local->mtx); |
| if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)) |
| goto out; |
| |
| __ieee80211_stop_poll(sdata); |
| |
| mutex_lock(&local->iflist_mtx); |
| ieee80211_recalc_ps(local); |
| mutex_unlock(&local->iflist_mtx); |
| |
| if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) |
| goto out; |
| |
| /* |
| * We've received a probe response, but are not sure whether |
| * we have or will be receiving any beacons or data, so let's |
| * schedule the timers again, just in case. |
| */ |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| |
| mod_timer(&ifmgd->conn_mon_timer, |
| round_jiffies_up(jiffies + |
| IEEE80211_CONNECTION_IDLE_TIME)); |
| out: |
| mutex_unlock(&local->mtx); |
| } |
| |
| static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_hdr *hdr, |
| u16 tx_time) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u16 tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK; |
| int ac = ieee80211_ac_from_tid(tid); |
| struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; |
| unsigned long now = jiffies; |
| |
| if (likely(!tx_tspec->admitted_time)) |
| return; |
| |
| if (time_after(now, tx_tspec->time_slice_start + HZ)) { |
| tx_tspec->consumed_tx_time = 0; |
| tx_tspec->time_slice_start = now; |
| |
| if (tx_tspec->downgraded) { |
| tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; |
| schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); |
| } |
| } |
| |
| if (tx_tspec->downgraded) |
| return; |
| |
| tx_tspec->consumed_tx_time += tx_time; |
| |
| if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) { |
| tx_tspec->downgraded = true; |
| tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE; |
| schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); |
| } |
| } |
| |
| void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_hdr *hdr, bool ack, u16 tx_time) |
| { |
| ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time); |
| |
| if (!ieee80211_is_data(hdr->frame_control)) |
| return; |
| |
| if (ieee80211_is_nullfunc(hdr->frame_control) && |
| sdata->u.mgd.probe_send_count > 0) { |
| if (ack) |
| ieee80211_sta_reset_conn_monitor(sdata); |
| else |
| sdata->u.mgd.nullfunc_failed = true; |
| ieee80211_queue_work(&sdata->local->hw, &sdata->work); |
| return; |
| } |
| |
| if (ack) |
| ieee80211_sta_reset_conn_monitor(sdata); |
| } |
| |
| static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| const u8 *ssid; |
| u8 *dst = ifmgd->associated->bssid; |
| u8 unicast_limit = max(1, max_probe_tries - 3); |
| struct sta_info *sta; |
| |
| /* |
| * Try sending broadcast probe requests for the last three |
| * probe requests after the first ones failed since some |
| * buggy APs only support broadcast probe requests. |
| */ |
| if (ifmgd->probe_send_count >= unicast_limit) |
| dst = NULL; |
| |
| /* |
| * When the hardware reports an accurate Tx ACK status, it's |
| * better to send a nullfunc frame instead of a probe request, |
| * as it will kick us off the AP quickly if we aren't associated |
| * anymore. The timeout will be reset if the frame is ACKed by |
| * the AP. |
| */ |
| ifmgd->probe_send_count++; |
| |
| if (dst) { |
| mutex_lock(&sdata->local->sta_mtx); |
| sta = sta_info_get(sdata, dst); |
| if (!WARN_ON(!sta)) |
| ieee80211_check_fast_rx(sta); |
| mutex_unlock(&sdata->local->sta_mtx); |
| } |
| |
| if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) { |
| ifmgd->nullfunc_failed = false; |
| ieee80211_send_nullfunc(sdata->local, sdata, false); |
| } else { |
| int ssid_len; |
| |
| rcu_read_lock(); |
| ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID); |
| if (WARN_ON_ONCE(ssid == NULL)) |
| ssid_len = 0; |
| else |
| ssid_len = ssid[1]; |
| |
| ieee80211_send_probe_req(sdata, sdata->vif.addr, dst, |
| ssid + 2, ssid_len, NULL, |
| 0, (u32) -1, true, 0, |
| ifmgd->associated->channel, false); |
| rcu_read_unlock(); |
| } |
| |
| ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); |
| run_again(sdata, ifmgd->probe_timeout); |
| } |
| |
| static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, |
| bool beacon) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| bool already = false; |
| |
| if (!ieee80211_sdata_running(sdata)) |
| return; |
| |
| sdata_lock(sdata); |
| |
| if (!ifmgd->associated) |
| goto out; |
| |
| mutex_lock(&sdata->local->mtx); |
| |
| if (sdata->local->tmp_channel || sdata->local->scanning) { |
| mutex_unlock(&sdata->local->mtx); |
| goto out; |
| } |
| |
| if (beacon) { |
| mlme_dbg_ratelimited(sdata, |
| "detected beacon loss from AP (missed %d beacons) - probing\n", |
| beacon_loss_count); |
| |
| ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL); |
| } |
| |
| /* |
| * The driver/our work has already reported this event or the |
| * connection monitoring has kicked in and we have already sent |
| * a probe request. Or maybe the AP died and the driver keeps |
| * reporting until we disassociate... |
| * |
| * In either case we have to ignore the current call to this |
| * function (except for setting the correct probe reason bit) |
| * because otherwise we would reset the timer every time and |
| * never check whether we received a probe response! |
| */ |
| if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) |
| already = true; |
| |
| ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; |
| |
| mutex_unlock(&sdata->local->mtx); |
| |
| if (already) |
| goto out; |
| |
| mutex_lock(&sdata->local->iflist_mtx); |
| ieee80211_recalc_ps(sdata->local); |
| mutex_unlock(&sdata->local->iflist_mtx); |
| |
| ifmgd->probe_send_count = 0; |
| ieee80211_mgd_probe_ap_send(sdata); |
| out: |
| sdata_unlock(sdata); |
| } |
| |
| struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct cfg80211_bss *cbss; |
| struct sk_buff *skb; |
| const u8 *ssid; |
| int ssid_len; |
| |
| if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) |
| return NULL; |
| |
| sdata_assert_lock(sdata); |
| |
| if (ifmgd->associated) |
| cbss = ifmgd->associated; |
| else if (ifmgd->auth_data) |
| cbss = ifmgd->auth_data->bss; |
| else if (ifmgd->assoc_data) |
| cbss = ifmgd->assoc_data->bss; |
| else |
| return NULL; |
| |
| rcu_read_lock(); |
| ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID); |
| if (WARN_ON_ONCE(ssid == NULL)) |
| ssid_len = 0; |
| else |
| ssid_len = ssid[1]; |
| |
| skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid, |
| (u32) -1, cbss->channel, |
| ssid + 2, ssid_len, |
| NULL, 0, true); |
| rcu_read_unlock(); |
| |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_ap_probereq_get); |
| |
| static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata, |
| const u8 *buf, size_t len, bool tx, |
| u16 reason) |
| { |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT, |
| .u.mlme.reason = reason, |
| }; |
| |
| if (tx) |
| cfg80211_tx_mlme_mgmt(sdata->dev, buf, len); |
| else |
| cfg80211_rx_mlme_mgmt(sdata->dev, buf, len); |
| |
| drv_event_callback(sdata->local, sdata, &event); |
| } |
| |
| static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| sdata_lock(sdata); |
| if (!ifmgd->associated) { |
| sdata_unlock(sdata); |
| return; |
| } |
| |
| /* AP is probably out of range (or not reachable for another reason) so |
| * remove the bss struct for that AP. |
| */ |
| cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated); |
| |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, |
| true, frame_buf); |
| mutex_lock(&local->mtx); |
| sdata->vif.csa_active = false; |
| ifmgd->csa_waiting_bcn = false; |
| if (sdata->csa_block_tx) { |
| ieee80211_wake_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_CSA); |
| sdata->csa_block_tx = false; |
| } |
| mutex_unlock(&local->mtx); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); |
| |
| sdata_unlock(sdata); |
| } |
| |
| static void ieee80211_beacon_connection_loss_work(struct work_struct *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.beacon_connection_loss_work); |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| if (ifmgd->associated) |
| ifmgd->beacon_loss_count++; |
| |
| if (ifmgd->connection_loss) { |
| sdata_info(sdata, "Connection to AP %pM lost\n", |
| ifmgd->bssid); |
| __ieee80211_disconnect(sdata); |
| } else { |
| ieee80211_mgd_probe_ap(sdata, true); |
| } |
| } |
| |
| static void ieee80211_csa_connection_drop_work(struct work_struct *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.csa_connection_drop_work); |
| |
| __ieee80211_disconnect(sdata); |
| } |
| |
| void ieee80211_beacon_loss(struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_hw *hw = &sdata->local->hw; |
| |
| trace_api_beacon_loss(sdata); |
| |
| sdata->u.mgd.connection_loss = false; |
| ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); |
| } |
| EXPORT_SYMBOL(ieee80211_beacon_loss); |
| |
| void ieee80211_connection_loss(struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_hw *hw = &sdata->local->hw; |
| |
| trace_api_connection_loss(sdata); |
| |
| sdata->u.mgd.connection_loss = true; |
| ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); |
| } |
| EXPORT_SYMBOL(ieee80211_connection_loss); |
| |
| |
| static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, |
| bool assoc) |
| { |
| struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; |
| |
| sdata_assert_lock(sdata); |
| |
| if (!assoc) { |
| /* |
| * we are not authenticated yet, the only timer that could be |
| * running is the timeout for the authentication response which |
| * which is not relevant anymore. |
| */ |
| del_timer_sync(&sdata->u.mgd.timer); |
| sta_info_destroy_addr(sdata, auth_data->bss->bssid); |
| |
| eth_zero_addr(sdata->u.mgd.bssid); |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); |
| sdata->u.mgd.flags = 0; |
| mutex_lock(&sdata->local->mtx); |
| ieee80211_vif_release_channel(sdata); |
| mutex_unlock(&sdata->local->mtx); |
| } |
| |
| cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); |
| kfree(auth_data); |
| sdata->u.mgd.auth_data = NULL; |
| } |
| |
| static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata, |
| bool assoc, bool abandon) |
| { |
| struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; |
| |
| sdata_assert_lock(sdata); |
| |
| if (!assoc) { |
| /* |
| * we are not associated yet, the only timer that could be |
| * running is the timeout for the association response which |
| * which is not relevant anymore. |
| */ |
| del_timer_sync(&sdata->u.mgd.timer); |
| sta_info_destroy_addr(sdata, assoc_data->bss->bssid); |
| |
| eth_zero_addr(sdata->u.mgd.bssid); |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); |
| sdata->u.mgd.flags = 0; |
| sdata->vif.mu_mimo_owner = false; |
| |
| mutex_lock(&sdata->local->mtx); |
| ieee80211_vif_release_channel(sdata); |
| mutex_unlock(&sdata->local->mtx); |
| |
| if (abandon) |
| cfg80211_abandon_assoc(sdata->dev, assoc_data->bss); |
| } |
| |
| kfree(assoc_data); |
| sdata->u.mgd.assoc_data = NULL; |
| } |
| |
| static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; |
| u8 *pos; |
| struct ieee802_11_elems elems; |
| u32 tx_flags = 0; |
| |
| pos = mgmt->u.auth.variable; |
| ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems); |
| if (!elems.challenge) |
| return; |
| auth_data->expected_transaction = 4; |
| drv_mgd_prepare_tx(sdata->local, sdata); |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | |
| IEEE80211_TX_INTFL_MLME_CONN_TX; |
| ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, |
| elems.challenge - 2, elems.challenge_len + 2, |
| auth_data->bss->bssid, auth_data->bss->bssid, |
| auth_data->key, auth_data->key_len, |
| auth_data->key_idx, tx_flags); |
| } |
| |
| static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 bssid[ETH_ALEN]; |
| u16 auth_alg, auth_transaction, status_code; |
| struct sta_info *sta; |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = AUTH_EVENT, |
| }; |
| |
| sdata_assert_lock(sdata); |
| |
| if (len < 24 + 6) |
| return; |
| |
| if (!ifmgd->auth_data || ifmgd->auth_data->done) |
| return; |
| |
| memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); |
| |
| if (!ether_addr_equal(bssid, mgmt->bssid)) |
| return; |
| |
| auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); |
| auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); |
| status_code = le16_to_cpu(mgmt->u.auth.status_code); |
| |
| if (auth_alg != ifmgd->auth_data->algorithm || |
| auth_transaction != ifmgd->auth_data->expected_transaction) { |
| sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n", |
| mgmt->sa, auth_alg, ifmgd->auth_data->algorithm, |
| auth_transaction, |
| ifmgd->auth_data->expected_transaction); |
| return; |
| } |
| |
| if (status_code != WLAN_STATUS_SUCCESS) { |
| sdata_info(sdata, "%pM denied authentication (status %d)\n", |
| mgmt->sa, status_code); |
| ieee80211_destroy_auth_data(sdata, false); |
| cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); |
| event.u.mlme.status = MLME_DENIED; |
| event.u.mlme.reason = status_code; |
| drv_event_callback(sdata->local, sdata, &event); |
| return; |
| } |
| |
| switch (ifmgd->auth_data->algorithm) { |
| case WLAN_AUTH_OPEN: |
| case WLAN_AUTH_LEAP: |
| case WLAN_AUTH_FT: |
| case WLAN_AUTH_SAE: |
| case WLAN_AUTH_FILS_SK: |
| case WLAN_AUTH_FILS_SK_PFS: |
| case WLAN_AUTH_FILS_PK: |
| break; |
| case WLAN_AUTH_SHARED_KEY: |
| if (ifmgd->auth_data->expected_transaction != 4) { |
| ieee80211_auth_challenge(sdata, mgmt, len); |
| /* need another frame */ |
| return; |
| } |
| break; |
| default: |
| WARN_ONCE(1, "invalid auth alg %d", |
| ifmgd->auth_data->algorithm); |
| return; |
| } |
| |
| event.u.mlme.status = MLME_SUCCESS; |
| drv_event_callback(sdata->local, sdata, &event); |
| sdata_info(sdata, "authenticated\n"); |
| ifmgd->auth_data->done = true; |
| ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; |
| ifmgd->auth_data->timeout_started = true; |
| run_again(sdata, ifmgd->auth_data->timeout); |
| |
| if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && |
| ifmgd->auth_data->expected_transaction != 2) { |
| /* |
| * Report auth frame to user space for processing since another |
| * round of Authentication frames is still needed. |
| */ |
| cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); |
| return; |
| } |
| |
| /* move station state to auth */ |
| mutex_lock(&sdata->local->sta_mtx); |
| sta = sta_info_get(sdata, bssid); |
| if (!sta) { |
| WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid); |
| goto out_err; |
| } |
| if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) { |
| sdata_info(sdata, "failed moving %pM to auth\n", bssid); |
| goto out_err; |
| } |
| mutex_unlock(&sdata->local->sta_mtx); |
| |
| cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); |
| return; |
| out_err: |
| mutex_unlock(&sdata->local->sta_mtx); |
| /* ignore frame -- wait for timeout */ |
| } |
| |
| #define case_WLAN(type) \ |
| case WLAN_REASON_##type: return #type |
| |
| static const char *ieee80211_get_reason_code_string(u16 reason_code) |
| { |
| switch (reason_code) { |
| case_WLAN(UNSPECIFIED); |
| case_WLAN(PREV_AUTH_NOT_VALID); |
| case_WLAN(DEAUTH_LEAVING); |
| case_WLAN(DISASSOC_DUE_TO_INACTIVITY); |
| case_WLAN(DISASSOC_AP_BUSY); |
| case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA); |
| case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA); |
| case_WLAN(DISASSOC_STA_HAS_LEFT); |
| case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH); |
| case_WLAN(DISASSOC_BAD_POWER); |
| case_WLAN(DISASSOC_BAD_SUPP_CHAN); |
| case_WLAN(INVALID_IE); |
| case_WLAN(MIC_FAILURE); |
| case_WLAN(4WAY_HANDSHAKE_TIMEOUT); |
| case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT); |
| case_WLAN(IE_DIFFERENT); |
| case_WLAN(INVALID_GROUP_CIPHER); |
| case_WLAN(INVALID_PAIRWISE_CIPHER); |
| case_WLAN(INVALID_AKMP); |
| case_WLAN(UNSUPP_RSN_VERSION); |
| case_WLAN(INVALID_RSN_IE_CAP); |
| case_WLAN(IEEE8021X_FAILED); |
| case_WLAN(CIPHER_SUITE_REJECTED); |
| case_WLAN(DISASSOC_UNSPECIFIED_QOS); |
| case_WLAN(DISASSOC_QAP_NO_BANDWIDTH); |
| case_WLAN(DISASSOC_LOW_ACK); |
| case_WLAN(DISASSOC_QAP_EXCEED_TXOP); |
| case_WLAN(QSTA_LEAVE_QBSS); |
| case_WLAN(QSTA_NOT_USE); |
| case_WLAN(QSTA_REQUIRE_SETUP); |
| case_WLAN(QSTA_TIMEOUT); |
| case_WLAN(QSTA_CIPHER_NOT_SUPP); |
| case_WLAN(MESH_PEER_CANCELED); |
| case_WLAN(MESH_MAX_PEERS); |
| case_WLAN(MESH_CONFIG); |
| case_WLAN(MESH_CLOSE); |
| case_WLAN(MESH_MAX_RETRIES); |
| case_WLAN(MESH_CONFIRM_TIMEOUT); |
| case_WLAN(MESH_INVALID_GTK); |
| case_WLAN(MESH_INCONSISTENT_PARAM); |
| case_WLAN(MESH_INVALID_SECURITY); |
| case_WLAN(MESH_PATH_ERROR); |
| case_WLAN(MESH_PATH_NOFORWARD); |
| case_WLAN(MESH_PATH_DEST_UNREACHABLE); |
| case_WLAN(MAC_EXISTS_IN_MBSS); |
| case_WLAN(MESH_CHAN_REGULATORY); |
| case_WLAN(MESH_CHAN); |
| default: return "<unknown>"; |
| } |
| } |
| |
| static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); |
| |
| sdata_assert_lock(sdata); |
| |
| if (len < 24 + 2) |
| return; |
| |
| if (ifmgd->associated && |
| ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) { |
| const u8 *bssid = ifmgd->associated->bssid; |
| |
| sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n", |
| bssid, reason_code, |
| ieee80211_get_reason_code_string(reason_code)); |
| |
| ieee80211_set_disassoc(sdata, 0, 0, false, NULL); |
| |
| ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, |
| reason_code); |
| return; |
| } |
| |
| if (ifmgd->assoc_data && |
| ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { |
| const u8 *bssid = ifmgd->assoc_data->bss->bssid; |
| |
| sdata_info(sdata, |
| "deauthenticated from %pM while associating (Reason: %u=%s)\n", |
| bssid, reason_code, |
| ieee80211_get_reason_code_string(reason_code)); |
| |
| ieee80211_destroy_assoc_data(sdata, false, true); |
| |
| cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); |
| return; |
| } |
| } |
| |
| |
| static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u16 reason_code; |
| |
| sdata_assert_lock(sdata); |
| |
| if (len < 24 + 2) |
| return; |
| |
| if (!ifmgd->associated || |
| !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) |
| return; |
| |
| reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); |
| |
| sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n", |
| mgmt->sa, reason_code, |
| ieee80211_get_reason_code_string(reason_code)); |
| |
| ieee80211_set_disassoc(sdata, 0, 0, false, NULL); |
| |
| ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code); |
| } |
| |
| static void ieee80211_get_rates(struct ieee80211_supported_band *sband, |
| u8 *supp_rates, unsigned int supp_rates_len, |
| u32 *rates, u32 *basic_rates, |
| bool *have_higher_than_11mbit, |
| int *min_rate, int *min_rate_index, |
| int shift, u32 rate_flags) |
| { |
| int i, j; |
| |
| for (i = 0; i < supp_rates_len; i++) { |
| int rate = supp_rates[i] & 0x7f; |
| bool is_basic = !!(supp_rates[i] & 0x80); |
| |
| if ((rate * 5 * (1 << shift)) > 110) |
| *have_higher_than_11mbit = true; |
| |
| /* |
| * Skip HT and VHT BSS membership selectors since they're not |
| * rates. |
| * |
| * Note: Even though the membership selector and the basic |
| * rate flag share the same bit, they are not exactly |
| * the same. |
| */ |
| if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) || |
| supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY)) |
| continue; |
| |
| for (j = 0; j < sband->n_bitrates; j++) { |
| struct ieee80211_rate *br; |
| int brate; |
| |
| br = &sband->bitrates[j]; |
| if ((rate_flags & br->flags) != rate_flags) |
| continue; |
| |
| brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5); |
| if (brate == rate) { |
| *rates |= BIT(j); |
| if (is_basic) |
| *basic_rates |= BIT(j); |
| if ((rate * 5) < *min_rate) { |
| *min_rate = rate * 5; |
| *min_rate_index = j; |
| } |
| break; |
| } |
| } |
| } |
| } |
| |
| static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_bss *cbss, |
| struct ieee80211_mgmt *mgmt, size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_supported_band *sband; |
| struct sta_info *sta; |
| u8 *pos; |
| u16 capab_info, aid; |
| struct ieee802_11_elems elems; |
| struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; |
| const struct cfg80211_bss_ies *bss_ies = NULL; |
| struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; |
| u32 changed = 0; |
| int err; |
| bool ret; |
| |
| /* AssocResp and ReassocResp have identical structure */ |
| |
| aid = le16_to_cpu(mgmt->u.assoc_resp.aid); |
| capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); |
| |
| if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14))) |
| sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n", |
| aid); |
| aid &= ~(BIT(15) | BIT(14)); |
| |
| ifmgd->broken_ap = false; |
| |
| if (aid == 0 || aid > IEEE80211_MAX_AID) { |
| sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n", |
| aid); |
| aid = 0; |
| ifmgd->broken_ap = true; |
| } |
| |
| pos = mgmt->u.assoc_resp.variable; |
| ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems); |
| |
| if (!elems.supp_rates) { |
| sdata_info(sdata, "no SuppRates element in AssocResp\n"); |
| return false; |
| } |
| |
| ifmgd->aid = aid; |
| ifmgd->tdls_chan_switch_prohibited = |
| elems.ext_capab && elems.ext_capab_len >= 5 && |
| (elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED); |
| |
| /* |
| * Some APs are erroneously not including some information in their |
| * (re)association response frames. Try to recover by using the data |
| * from the beacon or probe response. This seems to afflict mobile |
| * 2G/3G/4G wifi routers, reported models include the "Onda PN51T", |
| * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device. |
| */ |
| if ((assoc_data->wmm && !elems.wmm_param) || |
| (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && |
| (!elems.ht_cap_elem || !elems.ht_operation)) || |
| (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && |
| (!elems.vht_cap_elem || !elems.vht_operation))) { |
| const struct cfg80211_bss_ies *ies; |
| struct ieee802_11_elems bss_elems; |
| |
| rcu_read_lock(); |
| ies = rcu_dereference(cbss->ies); |
| if (ies) |
| bss_ies = kmemdup(ies, sizeof(*ies) + ies->len, |
| GFP_ATOMIC); |
| rcu_read_unlock(); |
| if (!bss_ies) |
| return false; |
| |
| ieee802_11_parse_elems(bss_ies->data, bss_ies->len, |
| false, &bss_elems); |
| if (assoc_data->wmm && |
| !elems.wmm_param && bss_elems.wmm_param) { |
| elems.wmm_param = bss_elems.wmm_param; |
| sdata_info(sdata, |
| "AP bug: WMM param missing from AssocResp\n"); |
| } |
| |
| /* |
| * Also check if we requested HT/VHT, otherwise the AP doesn't |
| * have to include the IEs in the (re)association response. |
| */ |
| if (!elems.ht_cap_elem && bss_elems.ht_cap_elem && |
| !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { |
| elems.ht_cap_elem = bss_elems.ht_cap_elem; |
| sdata_info(sdata, |
| "AP bug: HT capability missing from AssocResp\n"); |
| } |
| if (!elems.ht_operation && bss_elems.ht_operation && |
| !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { |
| elems.ht_operation = bss_elems.ht_operation; |
| sdata_info(sdata, |
| "AP bug: HT operation missing from AssocResp\n"); |
| } |
| if (!elems.vht_cap_elem && bss_elems.vht_cap_elem && |
| !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { |
| elems.vht_cap_elem = bss_elems.vht_cap_elem; |
| sdata_info(sdata, |
| "AP bug: VHT capa missing from AssocResp\n"); |
| } |
| if (!elems.vht_operation && bss_elems.vht_operation && |
| !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { |
| elems.vht_operation = bss_elems.vht_operation; |
| sdata_info(sdata, |
| "AP bug: VHT operation missing from AssocResp\n"); |
| } |
| } |
| |
| /* |
| * We previously checked these in the beacon/probe response, so |
| * they should be present here. This is just a safety net. |
| */ |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && |
| (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) { |
| sdata_info(sdata, |
| "HT AP is missing WMM params or HT capability/operation\n"); |
| ret = false; |
| goto out; |
| } |
| |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && |
| (!elems.vht_cap_elem || !elems.vht_operation)) { |
| sdata_info(sdata, |
| "VHT AP is missing VHT capability/operation\n"); |
| ret = false; |
| goto out; |
| } |
| |
| mutex_lock(&sdata->local->sta_mtx); |
| /* |
| * station info was already allocated and inserted before |
| * the association and should be available to us |
| */ |
| sta = sta_info_get(sdata, cbss->bssid); |
| if (WARN_ON(!sta)) { |
| mutex_unlock(&sdata->local->sta_mtx); |
| ret = false; |
| goto out; |
| } |
| |
| sband = ieee80211_get_sband(sdata); |
| if (!sband) { |
| mutex_unlock(&sdata->local->sta_mtx); |
| ret = false; |
| goto out; |
| } |
| |
| /* Set up internal HT/VHT capabilities */ |
| if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) |
| ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, |
| elems.ht_cap_elem, sta); |
| |
| if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) |
| ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, |
| elems.vht_cap_elem, sta); |
| |
| /* |
| * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data |
| * in their association response, so ignore that data for our own |
| * configuration. If it changed since the last beacon, we'll get the |
| * next beacon and update then. |
| */ |
| |
| /* |
| * If an operating mode notification IE is present, override the |
| * NSS calculation (that would be done in rate_control_rate_init()) |
| * and use the # of streams from that element. |
| */ |
| if (elems.opmode_notif && |
| !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { |
| u8 nss; |
| |
| nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; |
| nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; |
| nss += 1; |
| sta->sta.rx_nss = nss; |
| } |
| |
| rate_control_rate_init(sta); |
| |
| if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) { |
| set_sta_flag(sta, WLAN_STA_MFP); |
| sta->sta.mfp = true; |
| } else { |
| sta->sta.mfp = false; |
| } |
| |
| sta->sta.wme = elems.wmm_param && local->hw.queues >= IEEE80211_NUM_ACS; |
| |
| err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); |
| if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) |
| err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); |
| if (err) { |
| sdata_info(sdata, |
| "failed to move station %pM to desired state\n", |
| sta->sta.addr); |
| WARN_ON(__sta_info_destroy(sta)); |
| mutex_unlock(&sdata->local->sta_mtx); |
| ret = false; |
| goto out; |
| } |
| |
| mutex_unlock(&sdata->local->sta_mtx); |
| |
| /* |
| * Always handle WMM once after association regardless |
| * of the first value the AP uses. Setting -1 here has |
| * that effect because the AP values is an unsigned |
| * 4-bit value. |
| */ |
| ifmgd->wmm_last_param_set = -1; |
| |
| if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) { |
| ieee80211_set_wmm_default(sdata, false, false); |
| } else if (!ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, |
| elems.wmm_param_len)) { |
| /* still enable QoS since we might have HT/VHT */ |
| ieee80211_set_wmm_default(sdata, false, true); |
| /* set the disable-WMM flag in this case to disable |
| * tracking WMM parameter changes in the beacon if |
| * the parameters weren't actually valid. Doing so |
| * avoids changing parameters very strangely when |
| * the AP is going back and forth between valid and |
| * invalid parameters. |
| */ |
| ifmgd->flags |= IEEE80211_STA_DISABLE_WMM; |
| } |
| changed |= BSS_CHANGED_QOS; |
| |
| if (elems.max_idle_period_ie) { |
| bss_conf->max_idle_period = |
| le16_to_cpu(elems.max_idle_period_ie->max_idle_period); |
| bss_conf->protected_keep_alive = |
| !!(elems.max_idle_period_ie->idle_options & |
| WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE); |
| changed |= BSS_CHANGED_KEEP_ALIVE; |
| } else { |
| bss_conf->max_idle_period = 0; |
| bss_conf->protected_keep_alive = false; |
| } |
| |
| /* set AID and assoc capability, |
| * ieee80211_set_associated() will tell the driver */ |
| bss_conf->aid = aid; |
| bss_conf->assoc_capability = capab_info; |
| ieee80211_set_associated(sdata, cbss, changed); |
| |
| /* |
| * If we're using 4-addr mode, let the AP know that we're |
| * doing so, so that it can create the STA VLAN on its side |
| */ |
| if (ifmgd->use_4addr) |
| ieee80211_send_4addr_nullfunc(local, sdata); |
| |
| /* |
| * Start timer to probe the connection to the AP now. |
| * Also start the timer that will detect beacon loss. |
| */ |
| ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt); |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| |
| ret = true; |
| out: |
| kfree(bss_ies); |
| return ret; |
| } |
| |
| static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, |
| size_t len) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; |
| u16 capab_info, status_code, aid; |
| struct ieee802_11_elems elems; |
| int ac, uapsd_queues = -1; |
| u8 *pos; |
| bool reassoc; |
| struct cfg80211_bss *bss; |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = ASSOC_EVENT, |
| }; |
| |
| sdata_assert_lock(sdata); |
| |
| if (!assoc_data) |
| return; |
| if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid)) |
| return; |
| |
| /* |
| * AssocResp and ReassocResp have identical structure, so process both |
| * of them in this function. |
| */ |
| |
| if (len < 24 + 6) |
| return; |
| |
| reassoc = ieee80211_is_reassoc_req(mgmt->frame_control); |
| capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); |
| status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); |
| aid = le16_to_cpu(mgmt->u.assoc_resp.aid); |
| |
| sdata_info(sdata, |
| "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n", |
| reassoc ? "Rea" : "A", mgmt->sa, |
| capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); |
| |
| if (assoc_data->fils_kek_len && |
| fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0) |
| return; |
| |
| pos = mgmt->u.assoc_resp.variable; |
| ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems); |
| |
| if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && |
| elems.timeout_int && |
| elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) { |
| u32 tu, ms; |
| tu = le32_to_cpu(elems.timeout_int->value); |
| ms = tu * 1024 / 1000; |
| sdata_info(sdata, |
| "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", |
| mgmt->sa, tu, ms); |
| assoc_data->timeout = jiffies + msecs_to_jiffies(ms); |
| assoc_data->timeout_started = true; |
| if (ms > IEEE80211_ASSOC_TIMEOUT) |
| run_again(sdata, assoc_data->timeout); |
| return; |
| } |
| |
| bss = assoc_data->bss; |
| |
| if (status_code != WLAN_STATUS_SUCCESS) { |
| sdata_info(sdata, "%pM denied association (code=%d)\n", |
| mgmt->sa, status_code); |
| ieee80211_destroy_assoc_data(sdata, false, false); |
| event.u.mlme.status = MLME_DENIED; |
| event.u.mlme.reason = status_code; |
| drv_event_callback(sdata->local, sdata, &event); |
| } else { |
| if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) { |
| /* oops -- internal error -- send timeout for now */ |
| ieee80211_destroy_assoc_data(sdata, false, false); |
| cfg80211_assoc_timeout(sdata->dev, bss); |
| return; |
| } |
| event.u.mlme.status = MLME_SUCCESS; |
| drv_event_callback(sdata->local, sdata, &event); |
| sdata_info(sdata, "associated\n"); |
| |
| /* |
| * destroy assoc_data afterwards, as otherwise an idle |
| * recalc after assoc_data is NULL but before associated |
| * is set can cause the interface to go idle |
| */ |
| ieee80211_destroy_assoc_data(sdata, true, false); |
| |
| /* get uapsd queues configuration */ |
| uapsd_queues = 0; |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) |
| if (sdata->tx_conf[ac].uapsd) |
| uapsd_queues |= ieee80211_ac_to_qos_mask[ac]; |
| } |
| |
| cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues); |
| } |
| |
| static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len, |
| struct ieee80211_rx_status *rx_status, |
| struct ieee802_11_elems *elems) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_bss *bss; |
| struct ieee80211_channel *channel; |
| |
| sdata_assert_lock(sdata); |
| |
| channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq); |
| if (!channel) |
| return; |
| |
| bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems, |
| channel); |
| if (bss) { |
| sdata->vif.bss_conf.beacon_rate = bss->beacon_rate; |
| ieee80211_rx_bss_put(local, bss); |
| } |
| } |
| |
| |
| static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_mgmt *mgmt = (void *)skb->data; |
| struct ieee80211_if_managed *ifmgd; |
| struct ieee80211_rx_status *rx_status = (void *) skb->cb; |
| size_t baselen, len = skb->len; |
| struct ieee802_11_elems elems; |
| |
| ifmgd = &sdata->u.mgd; |
| |
| sdata_assert_lock(sdata); |
| |
| if (!ether_addr_equal(mgmt->da, sdata->vif.addr)) |
| return; /* ignore ProbeResp to foreign address */ |
| |
| baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; |
| if (baselen > len) |
| return; |
| |
| ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, |
| false, &elems); |
| |
| ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); |
| |
| if (ifmgd->associated && |
| ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) |
| ieee80211_reset_ap_probe(sdata); |
| } |
| |
| /* |
| * This is the canonical list of information elements we care about, |
| * the filter code also gives us all changes to the Microsoft OUI |
| * (00:50:F2) vendor IE which is used for WMM which we need to track, |
| * as well as the DTPC IE (part of the Cisco OUI) used for signaling |
| * changes to requested client power. |
| * |
| * We implement beacon filtering in software since that means we can |
| * avoid processing the frame here and in cfg80211, and userspace |
| * will not be able to tell whether the hardware supports it or not. |
| * |
| * XXX: This list needs to be dynamic -- userspace needs to be able to |
| * add items it requires. It also needs to be able to tell us to |
| * look out for other vendor IEs. |
| */ |
| static const u64 care_about_ies = |
| (1ULL << WLAN_EID_COUNTRY) | |
| (1ULL << WLAN_EID_ERP_INFO) | |
| (1ULL << WLAN_EID_CHANNEL_SWITCH) | |
| (1ULL << WLAN_EID_PWR_CONSTRAINT) | |
| (1ULL << WLAN_EID_HT_CAPABILITY) | |
| (1ULL << WLAN_EID_HT_OPERATION) | |
| (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN); |
| |
| static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_mgmt *mgmt, size_t len, |
| struct ieee80211_rx_status *rx_status) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; |
| size_t baselen; |
| struct ieee802_11_elems elems; |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| struct ieee80211_channel *chan; |
| struct sta_info *sta; |
| u32 changed = 0; |
| bool erp_valid; |
| u8 erp_value = 0; |
| u32 ncrc; |
| u8 *bssid; |
| u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| sdata_assert_lock(sdata); |
| |
| /* Process beacon from the current BSS */ |
| baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; |
| if (baselen > len) |
| return; |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| rcu_read_unlock(); |
| return; |
| } |
| |
| if (rx_status->freq != chanctx_conf->def.chan->center_freq) { |
| rcu_read_unlock(); |
| return; |
| } |
| chan = chanctx_conf->def.chan; |
| rcu_read_unlock(); |
| |
| if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && |
| ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { |
| ieee802_11_parse_elems(mgmt->u.beacon.variable, |
| len - baselen, false, &elems); |
| |
| ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); |
| if (elems.tim && !elems.parse_error) { |
| const struct ieee80211_tim_ie *tim_ie = elems.tim; |
| ifmgd->dtim_period = tim_ie->dtim_period; |
| } |
| ifmgd->have_beacon = true; |
| ifmgd->assoc_data->need_beacon = false; |
| if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { |
| sdata->vif.bss_conf.sync_tsf = |
| le64_to_cpu(mgmt->u.beacon.timestamp); |
| sdata->vif.bss_conf.sync_device_ts = |
| rx_status->device_timestamp; |
| if (elems.tim) |
| sdata->vif.bss_conf.sync_dtim_count = |
| elems.tim->dtim_count; |
| else |
| sdata->vif.bss_conf.sync_dtim_count = 0; |
| } |
| /* continue assoc process */ |
| ifmgd->assoc_data->timeout = jiffies; |
| ifmgd->assoc_data->timeout_started = true; |
| run_again(sdata, ifmgd->assoc_data->timeout); |
| return; |
| } |
| |
| if (!ifmgd->associated || |
| !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) |
| return; |
| bssid = ifmgd->associated->bssid; |
| |
| /* Track average RSSI from the Beacon frames of the current AP */ |
| if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) { |
| ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE; |
| ewma_beacon_signal_init(&ifmgd->ave_beacon_signal); |
| ifmgd->last_cqm_event_signal = 0; |
| ifmgd->count_beacon_signal = 1; |
| ifmgd->last_ave_beacon_signal = 0; |
| } else { |
| ifmgd->count_beacon_signal++; |
| } |
| |
| ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal); |
| |
| if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold && |
| ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { |
| int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); |
| int last_sig = ifmgd->last_ave_beacon_signal; |
| struct ieee80211_event event = { |
| .type = RSSI_EVENT, |
| }; |
| |
| /* |
| * if signal crosses either of the boundaries, invoke callback |
| * with appropriate parameters |
| */ |
| if (sig > ifmgd->rssi_max_thold && |
| (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) { |
| ifmgd->last_ave_beacon_signal = sig; |
| event.u.rssi.data = RSSI_EVENT_HIGH; |
| drv_event_callback(local, sdata, &event); |
| } else if (sig < ifmgd->rssi_min_thold && |
| (last_sig >= ifmgd->rssi_max_thold || |
| last_sig == 0)) { |
| ifmgd->last_ave_beacon_signal = sig; |
| event.u.rssi.data = RSSI_EVENT_LOW; |
| drv_event_callback(local, sdata, &event); |
| } |
| } |
| |
| if (bss_conf->cqm_rssi_thold && |
| ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT && |
| !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) { |
| int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); |
| int last_event = ifmgd->last_cqm_event_signal; |
| int thold = bss_conf->cqm_rssi_thold; |
| int hyst = bss_conf->cqm_rssi_hyst; |
| |
| if (sig < thold && |
| (last_event == 0 || sig < last_event - hyst)) { |
| ifmgd->last_cqm_event_signal = sig; |
| ieee80211_cqm_rssi_notify( |
| &sdata->vif, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, |
| sig, GFP_KERNEL); |
| } else if (sig > thold && |
| (last_event == 0 || sig > last_event + hyst)) { |
| ifmgd->last_cqm_event_signal = sig; |
| ieee80211_cqm_rssi_notify( |
| &sdata->vif, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, |
| sig, GFP_KERNEL); |
| } |
| } |
| |
| if (bss_conf->cqm_rssi_low && |
| ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { |
| int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); |
| int last_event = ifmgd->last_cqm_event_signal; |
| int low = bss_conf->cqm_rssi_low; |
| int high = bss_conf->cqm_rssi_high; |
| |
| if (sig < low && |
| (last_event == 0 || last_event >= low)) { |
| ifmgd->last_cqm_event_signal = sig; |
| ieee80211_cqm_rssi_notify( |
| &sdata->vif, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, |
| sig, GFP_KERNEL); |
| } else if (sig > high && |
| (last_event == 0 || last_event <= high)) { |
| ifmgd->last_cqm_event_signal = sig; |
| ieee80211_cqm_rssi_notify( |
| &sdata->vif, |
| NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, |
| sig, GFP_KERNEL); |
| } |
| } |
| |
| if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) { |
| mlme_dbg_ratelimited(sdata, |
| "cancelling AP probe due to a received beacon\n"); |
| ieee80211_reset_ap_probe(sdata); |
| } |
| |
| /* |
| * Push the beacon loss detection into the future since |
| * we are processing a beacon from the AP just now. |
| */ |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| |
| ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); |
| ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable, |
| len - baselen, false, &elems, |
| care_about_ies, ncrc); |
| |
| if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && |
| ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) { |
| if (local->hw.conf.dynamic_ps_timeout > 0) { |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { |
| local->hw.conf.flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, |
| IEEE80211_CONF_CHANGE_PS); |
| } |
| ieee80211_send_nullfunc(local, sdata, false); |
| } else if (!local->pspolling && sdata->u.mgd.powersave) { |
| local->pspolling = true; |
| |
| /* |
| * Here is assumed that the driver will be |
| * able to send ps-poll frame and receive a |
| * response even though power save mode is |
| * enabled, but some drivers might require |
| * to disable power save here. This needs |
| * to be investigated. |
| */ |
| ieee80211_send_pspoll(local, sdata); |
| } |
| } |
| |
| if (sdata->vif.p2p || |
| sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { |
| struct ieee80211_p2p_noa_attr noa = {}; |
| int ret; |
| |
| ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable, |
| len - baselen, |
| IEEE80211_P2P_ATTR_ABSENCE_NOTICE, |
| (u8 *) &noa, sizeof(noa)); |
| if (ret >= 2) { |
| if (sdata->u.mgd.p2p_noa_index != noa.index) { |
| /* valid noa_attr and index changed */ |
| sdata->u.mgd.p2p_noa_index = noa.index; |
| memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa)); |
| changed |= BSS_CHANGED_P2P_PS; |
| /* |
| * make sure we update all information, the CRC |
| * mechanism doesn't look at P2P attributes. |
| */ |
| ifmgd->beacon_crc_valid = false; |
| } |
| } else if (sdata->u.mgd.p2p_noa_index != -1) { |
| /* noa_attr not found and we had valid noa_attr before */ |
| sdata->u.mgd.p2p_noa_index = -1; |
| memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr)); |
| changed |= BSS_CHANGED_P2P_PS; |
| ifmgd->beacon_crc_valid = false; |
| } |
| } |
| |
| if (ifmgd->csa_waiting_bcn) |
| ieee80211_chswitch_post_beacon(sdata); |
| |
| /* |
| * Update beacon timing and dtim count on every beacon appearance. This |
| * will allow the driver to use the most updated values. Do it before |
| * comparing this one with last received beacon. |
| * IMPORTANT: These parameters would possibly be out of sync by the time |
| * the driver will use them. The synchronized view is currently |
| * guaranteed only in certain callbacks. |
| */ |
| if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { |
| sdata->vif.bss_conf.sync_tsf = |
| le64_to_cpu(mgmt->u.beacon.timestamp); |
| sdata->vif.bss_conf.sync_device_ts = |
| rx_status->device_timestamp; |
| if (elems.tim) |
| sdata->vif.bss_conf.sync_dtim_count = |
| elems.tim->dtim_count; |
| else |
| sdata->vif.bss_conf.sync_dtim_count = 0; |
| } |
| |
| if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) |
| return; |
| ifmgd->beacon_crc = ncrc; |
| ifmgd->beacon_crc_valid = true; |
| |
| ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); |
| |
| ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, |
| rx_status->device_timestamp, |
| &elems, true); |
| |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && |
| ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, |
| elems.wmm_param_len)) |
| changed |= BSS_CHANGED_QOS; |
| |
| /* |
| * If we haven't had a beacon before, tell the driver about the |
| * DTIM period (and beacon timing if desired) now. |
| */ |
| if (!ifmgd->have_beacon) { |
| /* a few bogus AP send dtim_period = 0 or no TIM IE */ |
| if (elems.tim) |
| bss_conf->dtim_period = elems.tim->dtim_period ?: 1; |
| else |
| bss_conf->dtim_period = 1; |
| |
| changed |= BSS_CHANGED_BEACON_INFO; |
| ifmgd->have_beacon = true; |
| |
| mutex_lock(&local->iflist_mtx); |
| ieee80211_recalc_ps(local); |
| mutex_unlock(&local->iflist_mtx); |
| |
| ieee80211_recalc_ps_vif(sdata); |
| } |
| |
| if (elems.erp_info) { |
| erp_valid = true; |
| erp_value = elems.erp_info[0]; |
| } else { |
| erp_valid = false; |
| } |
| changed |= ieee80211_handle_bss_capability(sdata, |
| le16_to_cpu(mgmt->u.beacon.capab_info), |
| erp_valid, erp_value); |
| |
| mutex_lock(&local->sta_mtx); |
| sta = sta_info_get(sdata, bssid); |
| |
| if (ieee80211_config_bw(sdata, sta, |
| elems.ht_cap_elem, elems.ht_operation, |
| elems.vht_operation, bssid, &changed)) { |
| mutex_unlock(&local->sta_mtx); |
| sdata_info(sdata, |
| "failed to follow AP %pM bandwidth change, disconnect\n", |
| bssid); |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_DEAUTH_LEAVING, |
| true, deauth_buf); |
| ieee80211_report_disconnect(sdata, deauth_buf, |
| sizeof(deauth_buf), true, |
| WLAN_REASON_DEAUTH_LEAVING); |
| return; |
| } |
| |
| if (sta && elems.opmode_notif) |
| ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, |
| rx_status->band); |
| mutex_unlock(&local->sta_mtx); |
| |
| changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt, |
| elems.country_elem, |
| elems.country_elem_len, |
| elems.pwr_constr_elem, |
| elems.cisco_dtpc_elem); |
| |
| ieee80211_bss_info_change_notify(sdata, changed); |
| } |
| |
| void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_rx_status *rx_status; |
| struct ieee80211_mgmt *mgmt; |
| u16 fc; |
| struct ieee802_11_elems elems; |
| int ies_len; |
| |
| rx_status = (struct ieee80211_rx_status *) skb->cb; |
| mgmt = (struct ieee80211_mgmt *) skb->data; |
| fc = le16_to_cpu(mgmt->frame_control); |
| |
| sdata_lock(sdata); |
| |
| switch (fc & IEEE80211_FCTL_STYPE) { |
| case IEEE80211_STYPE_BEACON: |
| ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status); |
| break; |
| case IEEE80211_STYPE_PROBE_RESP: |
| ieee80211_rx_mgmt_probe_resp(sdata, skb); |
| break; |
| case IEEE80211_STYPE_AUTH: |
| ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_DEAUTH: |
| ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_DISASSOC: |
| ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_ASSOC_RESP: |
| case IEEE80211_STYPE_REASSOC_RESP: |
| ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len); |
| break; |
| case IEEE80211_STYPE_ACTION: |
| if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { |
| ies_len = skb->len - |
| offsetof(struct ieee80211_mgmt, |
| u.action.u.chan_switch.variable); |
| |
| if (ies_len < 0) |
| break; |
| |
| ieee802_11_parse_elems( |
| mgmt->u.action.u.chan_switch.variable, |
| ies_len, true, &elems); |
| |
| if (elems.parse_error) |
| break; |
| |
| ieee80211_sta_process_chanswitch(sdata, |
| rx_status->mactime, |
| rx_status->device_timestamp, |
| &elems, false); |
| } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { |
| ies_len = skb->len - |
| offsetof(struct ieee80211_mgmt, |
| u.action.u.ext_chan_switch.variable); |
| |
| if (ies_len < 0) |
| break; |
| |
| ieee802_11_parse_elems( |
| mgmt->u.action.u.ext_chan_switch.variable, |
| ies_len, true, &elems); |
| |
| if (elems.parse_error) |
| break; |
| |
| /* for the handling code pretend this was also an IE */ |
| elems.ext_chansw_ie = |
| &mgmt->u.action.u.ext_chan_switch.data; |
| |
| ieee80211_sta_process_chanswitch(sdata, |
| rx_status->mactime, |
| rx_status->device_timestamp, |
| &elems, false); |
| } |
| break; |
| } |
| sdata_unlock(sdata); |
| } |
| |
| static void ieee80211_sta_timer(unsigned long data) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| (struct ieee80211_sub_if_data *) data; |
| |
| ieee80211_queue_work(&sdata->local->hw, &sdata->work); |
| } |
| |
| static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, |
| u8 *bssid, u8 reason, bool tx) |
| { |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, |
| tx, frame_buf); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, |
| reason); |
| } |
| |
| static int ieee80211_auth(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; |
| u32 tx_flags = 0; |
| u16 trans = 1; |
| u16 status = 0; |
| |
| sdata_assert_lock(sdata); |
| |
| if (WARN_ON_ONCE(!auth_data)) |
| return -EINVAL; |
| |
| auth_data->tries++; |
| |
| if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { |
| sdata_info(sdata, "authentication with %pM timed out\n", |
| auth_data->bss->bssid); |
| |
| /* |
| * Most likely AP is not in the range so remove the |
| * bss struct for that AP. |
| */ |
| cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss); |
| |
| return -ETIMEDOUT; |
| } |
| |
| drv_mgd_prepare_tx(local, sdata); |
| |
| sdata_info(sdata, "send auth to %pM (try %d/%d)\n", |
| auth_data->bss->bssid, auth_data->tries, |
| IEEE80211_AUTH_MAX_TRIES); |
| |
| auth_data->expected_transaction = 2; |
| |
| if (auth_data->algorithm == WLAN_AUTH_SAE) { |
| trans = auth_data->sae_trans; |
| status = auth_data->sae_status; |
| auth_data->expected_transaction = trans; |
| } |
| |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | |
| IEEE80211_TX_INTFL_MLME_CONN_TX; |
| |
| ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, |
| auth_data->data, auth_data->data_len, |
| auth_data->bss->bssid, |
| auth_data->bss->bssid, NULL, 0, 0, |
| tx_flags); |
| |
| if (tx_flags == 0) { |
| auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; |
| auth_data->timeout_started = true; |
| run_again(sdata, auth_data->timeout); |
| } else { |
| auth_data->timeout = |
| round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG); |
| auth_data->timeout_started = true; |
| run_again(sdata, auth_data->timeout); |
| } |
| |
| return 0; |
| } |
| |
| static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; |
| struct ieee80211_local *local = sdata->local; |
| |
| sdata_assert_lock(sdata); |
| |
| assoc_data->tries++; |
| if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) { |
| sdata_info(sdata, "association with %pM timed out\n", |
| assoc_data->bss->bssid); |
| |
| /* |
| * Most likely AP is not in the range so remove the |
| * bss struct for that AP. |
| */ |
| cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss); |
| |
| return -ETIMEDOUT; |
| } |
| |
| sdata_info(sdata, "associate with %pM (try %d/%d)\n", |
| assoc_data->bss->bssid, assoc_data->tries, |
| IEEE80211_ASSOC_MAX_TRIES); |
| ieee80211_send_assoc(sdata); |
| |
| if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { |
| assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; |
| assoc_data->timeout_started = true; |
| run_again(sdata, assoc_data->timeout); |
| } else { |
| assoc_data->timeout = |
| round_jiffies_up(jiffies + |
| IEEE80211_ASSOC_TIMEOUT_LONG); |
| assoc_data->timeout_started = true; |
| run_again(sdata, assoc_data->timeout); |
| } |
| |
| return 0; |
| } |
| |
| void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, |
| __le16 fc, bool acked) |
| { |
| struct ieee80211_local *local = sdata->local; |
| |
| sdata->u.mgd.status_fc = fc; |
| sdata->u.mgd.status_acked = acked; |
| sdata->u.mgd.status_received = true; |
| |
| ieee80211_queue_work(&local->hw, &sdata->work); |
| } |
| |
| void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| sdata_lock(sdata); |
| |
| if (ifmgd->status_received) { |
| __le16 fc = ifmgd->status_fc; |
| bool status_acked = ifmgd->status_acked; |
| |
| ifmgd->status_received = false; |
| if (ifmgd->auth_data && ieee80211_is_auth(fc)) { |
| if (status_acked) { |
| ifmgd->auth_data->timeout = |
| jiffies + IEEE80211_AUTH_TIMEOUT_SHORT; |
| run_again(sdata, ifmgd->auth_data->timeout); |
| } else { |
| ifmgd->auth_data->timeout = jiffies - 1; |
| } |
| ifmgd->auth_data->timeout_started = true; |
| } else if (ifmgd->assoc_data && |
| (ieee80211_is_assoc_req(fc) || |
| ieee80211_is_reassoc_req(fc))) { |
| if (status_acked) { |
| ifmgd->assoc_data->timeout = |
| jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT; |
| run_again(sdata, ifmgd->assoc_data->timeout); |
| } else { |
| ifmgd->assoc_data->timeout = jiffies - 1; |
| } |
| ifmgd->assoc_data->timeout_started = true; |
| } |
| } |
| |
| if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && |
| time_after(jiffies, ifmgd->auth_data->timeout)) { |
| if (ifmgd->auth_data->done) { |
| /* |
| * ok ... we waited for assoc but userspace didn't, |
| * so let's just kill the auth data |
| */ |
| ieee80211_destroy_auth_data(sdata, false); |
| } else if (ieee80211_auth(sdata)) { |
| u8 bssid[ETH_ALEN]; |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = AUTH_EVENT, |
| .u.mlme.status = MLME_TIMEOUT, |
| }; |
| |
| memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); |
| |
| ieee80211_destroy_auth_data(sdata, false); |
| |
| cfg80211_auth_timeout(sdata->dev, bssid); |
| drv_event_callback(sdata->local, sdata, &event); |
| } |
| } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) |
| run_again(sdata, ifmgd->auth_data->timeout); |
| |
| if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && |
| time_after(jiffies, ifmgd->assoc_data->timeout)) { |
| if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) || |
| ieee80211_do_assoc(sdata)) { |
| struct cfg80211_bss *bss = ifmgd->assoc_data->bss; |
| struct ieee80211_event event = { |
| .type = MLME_EVENT, |
| .u.mlme.data = ASSOC_EVENT, |
| .u.mlme.status = MLME_TIMEOUT, |
| }; |
| |
| ieee80211_destroy_assoc_data(sdata, false, false); |
| cfg80211_assoc_timeout(sdata->dev, bss); |
| drv_event_callback(sdata->local, sdata, &event); |
| } |
| } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) |
| run_again(sdata, ifmgd->assoc_data->timeout); |
| |
| if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL && |
| ifmgd->associated) { |
| u8 bssid[ETH_ALEN]; |
| int max_tries; |
| |
| memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); |
| |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) |
| max_tries = max_nullfunc_tries; |
| else |
| max_tries = max_probe_tries; |
| |
| /* ACK received for nullfunc probing frame */ |
| if (!ifmgd->probe_send_count) |
| ieee80211_reset_ap_probe(sdata); |
| else if (ifmgd->nullfunc_failed) { |
| if (ifmgd->probe_send_count < max_tries) { |
| mlme_dbg(sdata, |
| "No ack for nullfunc frame to AP %pM, try %d/%i\n", |
| bssid, ifmgd->probe_send_count, |
| max_tries); |
| ieee80211_mgd_probe_ap_send(sdata); |
| } else { |
| mlme_dbg(sdata, |
| "No ack for nullfunc frame to AP %pM, disconnecting.\n", |
| bssid); |
| ieee80211_sta_connection_lost(sdata, bssid, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, |
| false); |
| } |
| } else if (time_is_after_jiffies(ifmgd->probe_timeout)) |
| run_again(sdata, ifmgd->probe_timeout); |
| else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { |
| mlme_dbg(sdata, |
| "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", |
| bssid, probe_wait_ms); |
| ieee80211_sta_connection_lost(sdata, bssid, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); |
| } else if (ifmgd->probe_send_count < max_tries) { |
| mlme_dbg(sdata, |
| "No probe response from AP %pM after %dms, try %d/%i\n", |
| bssid, probe_wait_ms, |
| ifmgd->probe_send_count, max_tries); |
| ieee80211_mgd_probe_ap_send(sdata); |
| } else { |
| /* |
| * We actually lost the connection ... or did we? |
| * Let's make sure! |
| */ |
| mlme_dbg(sdata, |
| "No probe response from AP %pM after %dms, disconnecting.\n", |
| bssid, probe_wait_ms); |
| |
| ieee80211_sta_connection_lost(sdata, bssid, |
| WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); |
| } |
| } |
| |
| sdata_unlock(sdata); |
| } |
| |
| static void ieee80211_sta_bcn_mon_timer(unsigned long data) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| (struct ieee80211_sub_if_data *) data; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) |
| return; |
| |
| sdata->u.mgd.connection_loss = false; |
| ieee80211_queue_work(&sdata->local->hw, |
| &sdata->u.mgd.beacon_connection_loss_work); |
| } |
| |
| static void ieee80211_sta_conn_mon_timer(unsigned long data) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| (struct ieee80211_sub_if_data *) data; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_local *local = sdata->local; |
| |
| if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) |
| return; |
| |
| ieee80211_queue_work(&local->hw, &ifmgd->monitor_work); |
| } |
| |
| static void ieee80211_sta_monitor_work(struct work_struct *work) |
| { |
| struct ieee80211_sub_if_data *sdata = |
| container_of(work, struct ieee80211_sub_if_data, |
| u.mgd.monitor_work); |
| |
| ieee80211_mgd_probe_ap(sdata, false); |
| } |
| |
| static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) |
| { |
| if (sdata->vif.type == NL80211_IFTYPE_STATION) { |
| __ieee80211_stop_poll(sdata); |
| |
| /* let's probe the connection once */ |
| if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) |
| ieee80211_queue_work(&sdata->local->hw, |
| &sdata->u.mgd.monitor_work); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| sdata_lock(sdata); |
| |
| if (ifmgd->auth_data || ifmgd->assoc_data) { |
| const u8 *bssid = ifmgd->auth_data ? |
| ifmgd->auth_data->bss->bssid : |
| ifmgd->assoc_data->bss->bssid; |
| |
| /* |
| * If we are trying to authenticate / associate while suspending, |
| * cfg80211 won't know and won't actually abort those attempts, |
| * thus we need to do that ourselves. |
| */ |
| ieee80211_send_deauth_disassoc(sdata, bssid, |
| IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_DEAUTH_LEAVING, |
| false, frame_buf); |
| if (ifmgd->assoc_data) |
| ieee80211_destroy_assoc_data(sdata, false, true); |
| if (ifmgd->auth_data) |
| ieee80211_destroy_auth_data(sdata, false); |
| cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf, |
| IEEE80211_DEAUTH_FRAME_LEN); |
| } |
| |
| /* This is a bit of a hack - we should find a better and more generic |
| * solution to this. Normally when suspending, cfg80211 will in fact |
| * deauthenticate. However, it doesn't (and cannot) stop an ongoing |
| * auth (not so important) or assoc (this is the problem) process. |
| * |
| * As a consequence, it can happen that we are in the process of both |
| * associating and suspending, and receive an association response |
| * after cfg80211 has checked if it needs to disconnect, but before |
| * we actually set the flag to drop incoming frames. This will then |
| * cause the workqueue flush to process the association response in |
| * the suspend, resulting in a successful association just before it |
| * tries to remove the interface from the driver, which now though |
| * has a channel context assigned ... this results in issues. |
| * |
| * To work around this (for now) simply deauth here again if we're |
| * now connected. |
| */ |
| if (ifmgd->associated && !sdata->local->wowlan) { |
| u8 bssid[ETH_ALEN]; |
| struct cfg80211_deauth_request req = { |
| .reason_code = WLAN_REASON_DEAUTH_LEAVING, |
| .bssid = bssid, |
| }; |
| |
| memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); |
| ieee80211_mgd_deauth(sdata, &req); |
| } |
| |
| sdata_unlock(sdata); |
| } |
| |
| void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| sdata_lock(sdata); |
| if (!ifmgd->associated) { |
| sdata_unlock(sdata); |
| return; |
| } |
| |
| if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { |
| sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; |
| mlme_dbg(sdata, "driver requested disconnect after resume\n"); |
| ieee80211_sta_connection_lost(sdata, |
| ifmgd->associated->bssid, |
| WLAN_REASON_UNSPECIFIED, |
| true); |
| sdata_unlock(sdata); |
| return; |
| } |
| sdata_unlock(sdata); |
| } |
| #endif |
| |
| /* interface setup */ |
| void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd; |
| |
| ifmgd = &sdata->u.mgd; |
| INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work); |
| INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work); |
| INIT_WORK(&ifmgd->beacon_connection_loss_work, |
| ieee80211_beacon_connection_loss_work); |
| INIT_WORK(&ifmgd->csa_connection_drop_work, |
| ieee80211_csa_connection_drop_work); |
| INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work); |
| INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work, |
| ieee80211_tdls_peer_del_work); |
| setup_timer(&ifmgd->timer, ieee80211_sta_timer, |
| (unsigned long) sdata); |
| setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, |
| (unsigned long) sdata); |
| setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, |
| (unsigned long) sdata); |
| setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, |
| (unsigned long) sdata); |
| INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk, |
| ieee80211_sta_handle_tspec_ac_params_wk); |
| |
| ifmgd->flags = 0; |
| ifmgd->powersave = sdata->wdev.ps; |
| ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues; |
| ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len; |
| ifmgd->p2p_noa_index = -1; |
| |
| if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) |
| ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC; |
| else |
| ifmgd->req_smps = IEEE80211_SMPS_OFF; |
| |
| /* Setup TDLS data */ |
| spin_lock_init(&ifmgd->teardown_lock); |
| ifmgd->teardown_skb = NULL; |
| ifmgd->orig_teardown_skb = NULL; |
| } |
| |
| /* scan finished notification */ |
| void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| /* Restart STA timers */ |
| rcu_read_lock(); |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { |
| if (ieee80211_sdata_running(sdata)) |
| ieee80211_restart_sta_timer(sdata); |
| } |
| rcu_read_unlock(); |
| } |
| |
| static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_bss *cbss) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| const u8 *ht_cap_ie, *vht_cap_ie; |
| const struct ieee80211_ht_cap *ht_cap; |
| const struct ieee80211_vht_cap *vht_cap; |
| u8 chains = 1; |
| |
| if (ifmgd->flags & IEEE80211_STA_DISABLE_HT) |
| return chains; |
| |
| ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); |
| if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) { |
| ht_cap = (void *)(ht_cap_ie + 2); |
| chains = ieee80211_mcs_to_chains(&ht_cap->mcs); |
| /* |
| * TODO: use "Tx Maximum Number Spatial Streams Supported" and |
| * "Tx Unequal Modulation Supported" fields. |
| */ |
| } |
| |
| if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) |
| return chains; |
| |
| vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); |
| if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) { |
| u8 nss; |
| u16 tx_mcs_map; |
| |
| vht_cap = (void *)(vht_cap_ie + 2); |
| tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map); |
| for (nss = 8; nss > 0; nss--) { |
| if (((tx_mcs_map >> (2 * (nss - 1))) & 3) != |
| IEEE80211_VHT_MCS_NOT_SUPPORTED) |
| break; |
| } |
| /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */ |
| chains = max(chains, nss); |
| } |
| |
| return chains; |
| } |
| |
| static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_bss *cbss) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| const struct ieee80211_ht_cap *ht_cap = NULL; |
| const struct ieee80211_ht_operation *ht_oper = NULL; |
| const struct ieee80211_vht_operation *vht_oper = NULL; |
| struct ieee80211_supported_band *sband; |
| struct cfg80211_chan_def chandef; |
| int ret; |
| u32 i; |
| bool have_80mhz; |
| |
| sband = local->hw.wiphy->bands[cbss->channel->band]; |
| |
| ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ | |
| IEEE80211_STA_DISABLE_80P80MHZ | |
| IEEE80211_STA_DISABLE_160MHZ); |
| |
| rcu_read_lock(); |
| |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && |
| sband->ht_cap.ht_supported) { |
| const u8 *ht_oper_ie, *ht_cap_ie; |
| |
| ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION); |
| if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper)) |
| ht_oper = (void *)(ht_oper_ie + 2); |
| |
| ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); |
| if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) |
| ht_cap = (void *)(ht_cap_ie + 2); |
| |
| if (!ht_cap) { |
| ifmgd->flags |= IEEE80211_STA_DISABLE_HT; |
| ht_oper = NULL; |
| } |
| } |
| |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && |
| sband->vht_cap.vht_supported) { |
| const u8 *vht_oper_ie, *vht_cap; |
| |
| vht_oper_ie = ieee80211_bss_get_ie(cbss, |
| WLAN_EID_VHT_OPERATION); |
| if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper)) |
| vht_oper = (void *)(vht_oper_ie + 2); |
| if (vht_oper && !ht_oper) { |
| vht_oper = NULL; |
| sdata_info(sdata, |
| "AP advertised VHT without HT, disabling both\n"); |
| ifmgd->flags |= IEEE80211_STA_DISABLE_HT; |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| } |
| |
| vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); |
| if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) { |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| vht_oper = NULL; |
| } |
| } |
| |
| /* Allow VHT if at least one channel on the sband supports 80 MHz */ |
| have_80mhz = false; |
| for (i = 0; i < sband->n_channels; i++) { |
| if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | |
| IEEE80211_CHAN_NO_80MHZ)) |
| continue; |
| |
| have_80mhz = true; |
| break; |
| } |
| |
| if (!have_80mhz) |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| |
| ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, |
| cbss->channel, |
| ht_cap, ht_oper, vht_oper, |
| &chandef, false); |
| |
| sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss), |
| local->rx_chains); |
| |
| rcu_read_unlock(); |
| |
| /* will change later if needed */ |
| sdata->smps_mode = IEEE80211_SMPS_OFF; |
| |
| mutex_lock(&local->mtx); |
| /* |
| * If this fails (possibly due to channel context sharing |
| * on incompatible channels, e.g. 80+80 and 160 sharing the |
| * same control channel) try to use a smaller bandwidth. |
| */ |
| ret = ieee80211_vif_use_channel(sdata, &chandef, |
| IEEE80211_CHANCTX_SHARED); |
| |
| /* don't downgrade for 5 and 10 MHz channels, though. */ |
| if (chandef.width == NL80211_CHAN_WIDTH_5 || |
| chandef.width == NL80211_CHAN_WIDTH_10) |
| goto out; |
| |
| while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { |
| ifmgd->flags |= ieee80211_chandef_downgrade(&chandef); |
| ret = ieee80211_vif_use_channel(sdata, &chandef, |
| IEEE80211_CHANCTX_SHARED); |
| } |
| out: |
| mutex_unlock(&local->mtx); |
| return ret; |
| } |
| |
| static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_bss *cbss, bool assoc, |
| bool override) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_bss *bss = (void *)cbss->priv; |
| struct sta_info *new_sta = NULL; |
| struct ieee80211_supported_band *sband; |
| bool have_sta = false; |
| int err; |
| |
| sband = local->hw.wiphy->bands[cbss->channel->band]; |
| |
| if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) |
| return -EINVAL; |
| |
| /* If a reconfig is happening, bail out */ |
| if (local->in_reconfig) |
| return -EBUSY; |
| |
| if (assoc) { |
| rcu_read_lock(); |
| have_sta = sta_info_get(sdata, cbss->bssid); |
| rcu_read_unlock(); |
| } |
| |
| if (!have_sta) { |
| new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); |
| if (!new_sta) |
| return -ENOMEM; |
| } |
| |
| if (new_sta || override) { |
| err = ieee80211_prep_channel(sdata, cbss); |
| if (err) { |
| if (new_sta) |
| sta_info_free(local, new_sta); |
| return -EINVAL; |
| } |
| } |
| |
| if (new_sta) { |
| u32 rates = 0, basic_rates = 0; |
| bool have_higher_than_11mbit; |
| int min_rate = INT_MAX, min_rate_index = -1; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| const struct cfg80211_bss_ies *ies; |
| int shift = ieee80211_vif_get_shift(&sdata->vif); |
| u32 rate_flags; |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (WARN_ON(!chanctx_conf)) { |
| rcu_read_unlock(); |
| sta_info_free(local, new_sta); |
| return -EINVAL; |
| } |
| rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def); |
| rcu_read_unlock(); |
| |
| ieee80211_get_rates(sband, bss->supp_rates, |
| bss->supp_rates_len, |
| &rates, &basic_rates, |
| &have_higher_than_11mbit, |
| &min_rate, &min_rate_index, |
| shift, rate_flags); |
| |
| /* |
| * This used to be a workaround for basic rates missing |
| * in the association response frame. Now that we no |
| * longer use the basic rates from there, it probably |
| * doesn't happen any more, but keep the workaround so |
| * in case some *other* APs are buggy in different ways |
| * we can connect -- with a warning. |
| */ |
| if (!basic_rates && min_rate_index >= 0) { |
| sdata_info(sdata, |
| "No basic rates, using min rate instead\n"); |
| basic_rates = BIT(min_rate_index); |
| } |
| |
| new_sta->sta.supp_rates[cbss->channel->band] = rates; |
| sdata->vif.bss_conf.basic_rates = basic_rates; |
| |
| /* cf. IEEE 802.11 9.2.12 */ |
| if (cbss->channel->band == NL80211_BAND_2GHZ && |
| have_higher_than_11mbit) |
| sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; |
| else |
| sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; |
| |
| memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN); |
| |
| /* set timing information */ |
| sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; |
| rcu_read_lock(); |
| ies = rcu_dereference(cbss->beacon_ies); |
| if (ies) { |
| const u8 *tim_ie; |
| |
| sdata->vif.bss_conf.sync_tsf = ies->tsf; |
| sdata->vif.bss_conf.sync_device_ts = |
| bss->device_ts_beacon; |
| tim_ie = cfg80211_find_ie(WLAN_EID_TIM, |
| ies->data, ies->len); |
| if (tim_ie && tim_ie[1] >= 2) |
| sdata->vif.bss_conf.sync_dtim_count = tim_ie[2]; |
| else |
| sdata->vif.bss_conf.sync_dtim_count = 0; |
| } else if (!ieee80211_hw_check(&sdata->local->hw, |
| TIMING_BEACON_ONLY)) { |
| ies = rcu_dereference(cbss->proberesp_ies); |
| /* must be non-NULL since beacon IEs were NULL */ |
| sdata->vif.bss_conf.sync_tsf = ies->tsf; |
| sdata->vif.bss_conf.sync_device_ts = |
| bss->device_ts_presp; |
| sdata->vif.bss_conf.sync_dtim_count = 0; |
| } else { |
| sdata->vif.bss_conf.sync_tsf = 0; |
| sdata->vif.bss_conf.sync_device_ts = 0; |
| sdata->vif.bss_conf.sync_dtim_count = 0; |
| } |
| rcu_read_unlock(); |
| |
| /* tell driver about BSSID, basic rates and timing */ |
| ieee80211_bss_info_change_notify(sdata, |
| BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES | |
| BSS_CHANGED_BEACON_INT); |
| |
| if (assoc) |
| sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH); |
| |
| err = sta_info_insert(new_sta); |
| new_sta = NULL; |
| if (err) { |
| sdata_info(sdata, |
| "failed to insert STA entry for the AP (error %d)\n", |
| err); |
| return err; |
| } |
| } else |
| WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid)); |
| |
| /* Cancel scan to ensure that nothing interferes with connection */ |
| if (local->scanning) |
| ieee80211_scan_cancel(local); |
| |
| return 0; |
| } |
| |
| /* config hooks */ |
| int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_auth_request *req) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_mgd_auth_data *auth_data; |
| u16 auth_alg; |
| int err; |
| |
| /* prepare auth data structure */ |
| |
| switch (req->auth_type) { |
| case NL80211_AUTHTYPE_OPEN_SYSTEM: |
| auth_alg = WLAN_AUTH_OPEN; |
| break; |
| case NL80211_AUTHTYPE_SHARED_KEY: |
| if (IS_ERR(local->wep_tx_tfm)) |
| return -EOPNOTSUPP; |
| auth_alg = WLAN_AUTH_SHARED_KEY; |
| break; |
| case NL80211_AUTHTYPE_FT: |
| auth_alg = WLAN_AUTH_FT; |
| break; |
| case NL80211_AUTHTYPE_NETWORK_EAP: |
| auth_alg = WLAN_AUTH_LEAP; |
| break; |
| case NL80211_AUTHTYPE_SAE: |
| auth_alg = WLAN_AUTH_SAE; |
| break; |
| case NL80211_AUTHTYPE_FILS_SK: |
| auth_alg = WLAN_AUTH_FILS_SK; |
| break; |
| case NL80211_AUTHTYPE_FILS_SK_PFS: |
| auth_alg = WLAN_AUTH_FILS_SK_PFS; |
| break; |
| case NL80211_AUTHTYPE_FILS_PK: |
| auth_alg = WLAN_AUTH_FILS_PK; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len + |
| req->ie_len, GFP_KERNEL); |
| if (!auth_data) |
| return -ENOMEM; |
| |
| auth_data->bss = req->bss; |
| |
| if (req->auth_data_len >= 4) { |
| if (req->auth_type == NL80211_AUTHTYPE_SAE) { |
| __le16 *pos = (__le16 *) req->auth_data; |
| |
| auth_data->sae_trans = le16_to_cpu(pos[0]); |
| auth_data->sae_status = le16_to_cpu(pos[1]); |
| } |
| memcpy(auth_data->data, req->auth_data + 4, |
| req->auth_data_len - 4); |
| auth_data->data_len += req->auth_data_len - 4; |
| } |
| |
| if (req->ie && req->ie_len) { |
| memcpy(&auth_data->data[auth_data->data_len], |
| req->ie, req->ie_len); |
| auth_data->data_len += req->ie_len; |
| } |
| |
| if (req->key && req->key_len) { |
| auth_data->key_len = req->key_len; |
| auth_data->key_idx = req->key_idx; |
| memcpy(auth_data->key, req->key, req->key_len); |
| } |
| |
| auth_data->algorithm = auth_alg; |
| |
| /* try to authenticate/probe */ |
| |
| if ((ifmgd->auth_data && !ifmgd->auth_data->done) || |
| ifmgd->assoc_data) { |
| err = -EBUSY; |
| goto err_free; |
| } |
| |
| if (ifmgd->auth_data) |
| ieee80211_destroy_auth_data(sdata, false); |
| |
| /* prep auth_data so we don't go into idle on disassoc */ |
| ifmgd->auth_data = auth_data; |
| |
| if (ifmgd->associated) { |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| sdata_info(sdata, |
| "disconnect from AP %pM for new auth to %pM\n", |
| ifmgd->associated->bssid, req->bss->bssid); |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_UNSPECIFIED, |
| false, frame_buf); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| WLAN_REASON_UNSPECIFIED); |
| } |
| |
| sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid); |
| |
| err = ieee80211_prep_connection(sdata, req->bss, false, false); |
| if (err) |
| goto err_clear; |
| |
| err = ieee80211_auth(sdata); |
| if (err) { |
| sta_info_destroy_addr(sdata, req->bss->bssid); |
| goto err_clear; |
| } |
| |
| /* hold our own reference */ |
| cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); |
| return 0; |
| |
| err_clear: |
| eth_zero_addr(ifmgd->bssid); |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); |
| ifmgd->auth_data = NULL; |
| mutex_lock(&sdata->local->mtx); |
| ieee80211_vif_release_channel(sdata); |
| mutex_unlock(&sdata->local->mtx); |
| err_free: |
| kfree(auth_data); |
| return err; |
| } |
| |
| int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_assoc_request *req) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| struct ieee80211_bss *bss = (void *)req->bss->priv; |
| struct ieee80211_mgd_assoc_data *assoc_data; |
| const struct cfg80211_bss_ies *beacon_ies; |
| struct ieee80211_supported_band *sband; |
| const u8 *ssidie, *ht_ie, *vht_ie; |
| int i, err; |
| bool override = false; |
| |
| assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL); |
| if (!assoc_data) |
| return -ENOMEM; |
| |
| rcu_read_lock(); |
| ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID); |
| if (!ssidie) { |
| rcu_read_unlock(); |
| kfree(assoc_data); |
| return -EINVAL; |
| } |
| memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]); |
| assoc_data->ssid_len = ssidie[1]; |
| rcu_read_unlock(); |
| |
| if (ifmgd->associated) { |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| sdata_info(sdata, |
| "disconnect from AP %pM for new assoc to %pM\n", |
| ifmgd->associated->bssid, req->bss->bssid); |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| WLAN_REASON_UNSPECIFIED, |
| false, frame_buf); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| WLAN_REASON_UNSPECIFIED); |
| } |
| |
| if (ifmgd->auth_data && !ifmgd->auth_data->done) { |
| err = -EBUSY; |
| goto err_free; |
| } |
| |
| if (ifmgd->assoc_data) { |
| err = -EBUSY; |
| goto err_free; |
| } |
| |
| if (ifmgd->auth_data) { |
| bool match; |
| |
| /* keep sta info, bssid if matching */ |
| match = ether_addr_equal(ifmgd->bssid, req->bss->bssid); |
| ieee80211_destroy_auth_data(sdata, match); |
| } |
| |
| /* prepare assoc data */ |
| |
| ifmgd->beacon_crc_valid = false; |
| |
| assoc_data->wmm = bss->wmm_used && |
| (local->hw.queues >= IEEE80211_NUM_ACS); |
| |
| /* |
| * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode. |
| * We still associate in non-HT mode (11a/b/g) if any one of these |
| * ciphers is configured as pairwise. |
| * We can set this to true for non-11n hardware, that'll be checked |
| * separately along with the peer capabilities. |
| */ |
| for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) { |
| if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || |
| req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || |
| req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { |
| ifmgd->flags |= IEEE80211_STA_DISABLE_HT; |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| netdev_info(sdata->dev, |
| "disabling HT/VHT due to WEP/TKIP use\n"); |
| } |
| } |
| |
| /* Also disable HT if we don't support it or the AP doesn't use WMM */ |
| sband = local->hw.wiphy->bands[req->bss->channel->band]; |
| if (!sband->ht_cap.ht_supported || |
| local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used || |
| ifmgd->flags & IEEE80211_STA_DISABLE_WMM) { |
| ifmgd->flags |= IEEE80211_STA_DISABLE_HT; |
| if (!bss->wmm_used && |
| !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM)) |
| netdev_info(sdata->dev, |
| "disabling HT as WMM/QoS is not supported by the AP\n"); |
| } |
| |
| /* disable VHT if we don't support it or the AP doesn't use WMM */ |
| if (!sband->vht_cap.vht_supported || |
| local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used || |
| ifmgd->flags & IEEE80211_STA_DISABLE_WMM) { |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| if (!bss->wmm_used && |
| !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM)) |
| netdev_info(sdata->dev, |
| "disabling VHT as WMM/QoS is not supported by the AP\n"); |
| } |
| |
| memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); |
| memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, |
| sizeof(ifmgd->ht_capa_mask)); |
| |
| memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa)); |
| memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask, |
| sizeof(ifmgd->vht_capa_mask)); |
| |
| if (req->ie && req->ie_len) { |
| memcpy(assoc_data->ie, req->ie, req->ie_len); |
| assoc_data->ie_len = req->ie_len; |
| } |
| |
| if (req->fils_kek) { |
| /* should already be checked in cfg80211 - so warn */ |
| if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) { |
| err = -EINVAL; |
| goto err_free; |
| } |
| memcpy(assoc_data->fils_kek, req->fils_kek, |
| req->fils_kek_len); |
| assoc_data->fils_kek_len = req->fils_kek_len; |
| } |
| |
| if (req->fils_nonces) |
| memcpy(assoc_data->fils_nonces, req->fils_nonces, |
| 2 * FILS_NONCE_LEN); |
| |
| assoc_data->bss = req->bss; |
| |
| if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) { |
| if (ifmgd->powersave) |
| sdata->smps_mode = IEEE80211_SMPS_DYNAMIC; |
| else |
| sdata->smps_mode = IEEE80211_SMPS_OFF; |
| } else |
| sdata->smps_mode = ifmgd->req_smps; |
| |
| assoc_data->capability = req->bss->capability; |
| assoc_data->supp_rates = bss->supp_rates; |
| assoc_data->supp_rates_len = bss->supp_rates_len; |
| |
| rcu_read_lock(); |
| ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION); |
| if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation)) |
| assoc_data->ap_ht_param = |
| ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param; |
| else |
| ifmgd->flags |= IEEE80211_STA_DISABLE_HT; |
| vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY); |
| if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap)) |
| memcpy(&assoc_data->ap_vht_cap, vht_ie + 2, |
| sizeof(struct ieee80211_vht_cap)); |
| else |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| rcu_read_unlock(); |
| |
| if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) && |
| ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK), |
| "U-APSD not supported with HW_PS_NULLFUNC_STACK\n")) |
| sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD; |
| |
| if (bss->wmm_used && bss->uapsd_supported && |
| (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) { |
| assoc_data->uapsd = true; |
| ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; |
| } else { |
| assoc_data->uapsd = false; |
| ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED; |
| } |
| |
| if (req->prev_bssid) |
| memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN); |
| |
| if (req->use_mfp) { |
| ifmgd->mfp = IEEE80211_MFP_REQUIRED; |
| ifmgd->flags |= IEEE80211_STA_MFP_ENABLED; |
| } else { |
| ifmgd->mfp = IEEE80211_MFP_DISABLED; |
| ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED; |
| } |
| |
| if (req->flags & ASSOC_REQ_USE_RRM) |
| ifmgd->flags |= IEEE80211_STA_ENABLE_RRM; |
| else |
| ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM; |
| |
| if (req->crypto.control_port) |
| ifmgd->flags |= IEEE80211_STA_CONTROL_PORT; |
| else |
| ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT; |
| |
| sdata->control_port_protocol = req->crypto.control_port_ethertype; |
| sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt; |
| sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto, |
| sdata->vif.type); |
| |
| /* kick off associate process */ |
| |
| ifmgd->assoc_data = assoc_data; |
| ifmgd->dtim_period = 0; |
| ifmgd->have_beacon = false; |
| |
| /* override HT/VHT configuration only if the AP and we support it */ |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { |
| struct ieee80211_sta_ht_cap sta_ht_cap; |
| |
| if (req->flags & ASSOC_REQ_DISABLE_HT) |
| override = true; |
| |
| memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); |
| ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); |
| |
| /* check for 40 MHz disable override */ |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) && |
| sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && |
| !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) |
| override = true; |
| |
| if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && |
| req->flags & ASSOC_REQ_DISABLE_VHT) |
| override = true; |
| } |
| |
| if (req->flags & ASSOC_REQ_DISABLE_HT) { |
| ifmgd->flags |= IEEE80211_STA_DISABLE_HT; |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| } |
| |
| if (req->flags & ASSOC_REQ_DISABLE_VHT) |
| ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; |
| |
| err = ieee80211_prep_connection(sdata, req->bss, true, override); |
| if (err) |
| goto err_clear; |
| |
| rcu_read_lock(); |
| beacon_ies = rcu_dereference(req->bss->beacon_ies); |
| |
| if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) && |
| !beacon_ies) { |
| /* |
| * Wait up to one beacon interval ... |
| * should this be more if we miss one? |
| */ |
| sdata_info(sdata, "waiting for beacon from %pM\n", |
| ifmgd->bssid); |
| assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); |
| assoc_data->timeout_started = true; |
| assoc_data->need_beacon = true; |
| } else if (beacon_ies) { |
| const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, |
| beacon_ies->data, |
| beacon_ies->len); |
| u8 dtim_count = 0; |
| |
| if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) { |
| const struct ieee80211_tim_ie *tim; |
| tim = (void *)(tim_ie + 2); |
| ifmgd->dtim_period = tim->dtim_period; |
| dtim_count = tim->dtim_count; |
| } |
| ifmgd->have_beacon = true; |
| assoc_data->timeout = jiffies; |
| assoc_data->timeout_started = true; |
| |
| if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { |
| sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; |
| sdata->vif.bss_conf.sync_device_ts = |
| bss->device_ts_beacon; |
| sdata->vif.bss_conf.sync_dtim_count = dtim_count; |
| } |
| } else { |
| assoc_data->timeout = jiffies; |
| assoc_data->timeout_started = true; |
| } |
| rcu_read_unlock(); |
| |
| run_again(sdata, assoc_data->timeout); |
| |
| if (bss->corrupt_data) { |
| char *corrupt_type = "data"; |
| if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) { |
| if (bss->corrupt_data & |
| IEEE80211_BSS_CORRUPT_PROBE_RESP) |
| corrupt_type = "beacon and probe response"; |
| else |
| corrupt_type = "beacon"; |
| } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) |
| corrupt_type = "probe response"; |
| sdata_info(sdata, "associating with AP with corrupt %s\n", |
| corrupt_type); |
| } |
| |
| return 0; |
| err_clear: |
| eth_zero_addr(ifmgd->bssid); |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); |
| ifmgd->assoc_data = NULL; |
| err_free: |
| kfree(assoc_data); |
| return err; |
| } |
| |
| int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_deauth_request *req) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| bool tx = !req->local_state_change; |
| |
| if (ifmgd->auth_data && |
| ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) { |
| sdata_info(sdata, |
| "aborting authentication with %pM by local choice (Reason: %u=%s)\n", |
| req->bssid, req->reason_code, |
| ieee80211_get_reason_code_string(req->reason_code)); |
| |
| drv_mgd_prepare_tx(sdata->local, sdata); |
| ieee80211_send_deauth_disassoc(sdata, req->bssid, |
| IEEE80211_STYPE_DEAUTH, |
| req->reason_code, tx, |
| frame_buf); |
| ieee80211_destroy_auth_data(sdata, false); |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| req->reason_code); |
| |
| return 0; |
| } |
| |
| if (ifmgd->assoc_data && |
| ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) { |
| sdata_info(sdata, |
| "aborting association with %pM by local choice (Reason: %u=%s)\n", |
| req->bssid, req->reason_code, |
| ieee80211_get_reason_code_string(req->reason_code)); |
| |
| drv_mgd_prepare_tx(sdata->local, sdata); |
| ieee80211_send_deauth_disassoc(sdata, req->bssid, |
| IEEE80211_STYPE_DEAUTH, |
| req->reason_code, tx, |
| frame_buf); |
| ieee80211_destroy_assoc_data(sdata, false, true); |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| req->reason_code); |
| return 0; |
| } |
| |
| if (ifmgd->associated && |
| ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { |
| sdata_info(sdata, |
| "deauthenticating from %pM by local choice (Reason: %u=%s)\n", |
| req->bssid, req->reason_code, |
| ieee80211_get_reason_code_string(req->reason_code)); |
| |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, |
| req->reason_code, tx, frame_buf); |
| ieee80211_report_disconnect(sdata, frame_buf, |
| sizeof(frame_buf), true, |
| req->reason_code); |
| return 0; |
| } |
| |
| return -ENOTCONN; |
| } |
| |
| int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, |
| struct cfg80211_disassoc_request *req) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| u8 bssid[ETH_ALEN]; |
| u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; |
| |
| /* |
| * cfg80211 should catch this ... but it's racy since |
| * we can receive a disassoc frame, process it, hand it |
| * to cfg80211 while that's in a locked section already |
| * trying to tell us that the user wants to disconnect. |
| */ |
| if (ifmgd->associated != req->bss) |
| return -ENOLINK; |
| |
| sdata_info(sdata, |
| "disassociating from %pM by local choice (Reason: %u=%s)\n", |
| req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code)); |
| |
| memcpy(bssid, req->bss->bssid, ETH_ALEN); |
| ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC, |
| req->reason_code, !req->local_state_change, |
| frame_buf); |
| |
| ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, |
| req->reason_code); |
| |
| return 0; |
| } |
| |
| void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| |
| /* |
| * Make sure some work items will not run after this, |
| * they will not do anything but might not have been |
| * cancelled when disconnecting. |
| */ |
| cancel_work_sync(&ifmgd->monitor_work); |
| cancel_work_sync(&ifmgd->beacon_connection_loss_work); |
| cancel_work_sync(&ifmgd->request_smps_work); |
| cancel_work_sync(&ifmgd->csa_connection_drop_work); |
| cancel_work_sync(&ifmgd->chswitch_work); |
| cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work); |
| |
| sdata_lock(sdata); |
| if (ifmgd->assoc_data) { |
| struct cfg80211_bss *bss = ifmgd->assoc_data->bss; |
| ieee80211_destroy_assoc_data(sdata, false, false); |
| cfg80211_assoc_timeout(sdata->dev, bss); |
| } |
| if (ifmgd->auth_data) |
| ieee80211_destroy_auth_data(sdata, false); |
| spin_lock_bh(&ifmgd->teardown_lock); |
| if (ifmgd->teardown_skb) { |
| kfree_skb(ifmgd->teardown_skb); |
| ifmgd->teardown_skb = NULL; |
| ifmgd->orig_teardown_skb = NULL; |
| } |
| spin_unlock_bh(&ifmgd->teardown_lock); |
| del_timer_sync(&ifmgd->timer); |
| sdata_unlock(sdata); |
| } |
| |
| void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, |
| enum nl80211_cqm_rssi_threshold_event rssi_event, |
| s32 rssi_level, |
| gfp_t gfp) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level); |
| |
| cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp); |
| } |
| EXPORT_SYMBOL(ieee80211_cqm_rssi_notify); |
| |
| void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| trace_api_cqm_beacon_loss_notify(sdata->local, sdata); |
| |
| cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp); |
| } |
| EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify); |